Keychain: How to enable automatic access for certain applications?
I have gotten really tired of Adium and Skype asking for the keychain password every time I reboot the machine, and Quicksilver neeing my system password all the time when installing updates.
How do I enable automatic access to the keychain and system password for certain applications, but not all?
PowerBook G4, 1.5 Ghz Mac OS X (10.4.6)
Hi, Bjørn.
A. You wrote: "I have gotten really tired of Adium and Skype asking for the keychain password every time I reboot the machine..."There are two things to check. You'll use Keychain Access — in the Macintosh HD > Applications > Utilities folder — for both.
One key point to note before you begin: If the affected account was created under Jaguar, it's default keychain will have the same name as the account's short name. Accounts created under Panther or later have the default keychain name of "login." The user's default keychain is always highlighted in bold in the Keychains list in Keychain Access. All of the instructions in Mac Help regarding keychain assume the accounts were created under Tiger and always refer to keychain "login."
Here are the two issues to check and correct:
1. The affected account may have its keychain preferences set so that the keychain locks automatically after a period of inactivity or after sleep mode:1.1. Select the user's default keychain.
1.2. Click Edit > Change Settings for Keychain "keychain_name."
1.3. Deselect the checkbox next to "Lock after __ minutes of inactivity", if selected.
1.4. Deselect the checkbox next to "Lock when sleeping", if selected.
1.5. Click Save.2. The affected account's login password and keychain password are different. Set the keychain password on that account to be the same as the account's login password. See “Mac OS X 10.4 Help: Changing your keychain password.”
Once those steps are taken, if an application requests access to the keychain, click Always Allow.
Note that if you update applications, i.e. install later versions, you may be asked once to confirm the new version's access to your keychain. That's a standard security precaution.
B. You wrote: "...Quicksilver neeing my system password all the time when installing updates."That cannot be prevented if that application is installed in the Macintosh HD > Applications folder using an installer, such as the Mac OS X Installer. Authentication is required if an installer will add or change files in either Applications or other System-related folders.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Similar Messages
-
How to configure simultanous access for 11i application
Hi All
We have one existing 11i application instance on node grid1.In which we start the servicess from apps user.
In our same we want another node for the same application in which we will start the servicess from another user(merge)
For that we perfrom the following steps
1.Copy the APPL_TOP,COMMON_TOP,ORA_TOP(8.0.6,iAS) from node "GRID1" to diffrent node "GRID2"
2 configure the GRID2 node using adcfgclone.pl utility(we have configure new node for WEB and FORM Server)
3 We perfrom the modification in the following files ON GRID2 .
i Identify 'FNDNAM=apps' statement in $FND_TOP/secure/<context>.dbc
and replace with 'FNDNAME=merge' to connect to MERGE schema instaed of APPS.
ii. Go to the last line of $APACHE_TOP/jserv/etc/zone.properties file
and identify 'schema=APPS' statement and change it to 'schema=MERGE'
iii. Identify below lines in $APACHE_TOP/modplsql/cfg/wdbsvr.app file
password = apps
username = apps
document_table = APPS.fnd_lobs_document
and replace with modified below lines
password = merge
username = merge
document_table = MERGE.fnd_lobs_document
6. For redirecting user's request to new Application Server server, we
changed the following 4 system profile options with proper URL and port
at responsibility level only for the responsibilities,
which we use for Merge views.
Profile Options
Application Framework Agent
Applications JSP Agent
Applications Web Agent
Apps Servlet Agent
When we are able to start the services on GRID2 node,but at the time of login we are getting invalid user name/ passwd error
Please let us know is there any way to access application other than apps user
Regards
Sohailwell thank you very much .I know how to define a DataSource inside Weblogic Server.
But i am confused over one issue
When We are going to use Container Managed EntityManager inside the SessionBean the persistence.xml file looks like this
*<persistence>*
* <persistence-unit name="RamsEJBPU" transaction-type="JTA">*
* <jta-data-source>myJtaDataSource</jta-data-source>*
* </persistence-unit>*
*</persistence>*
But in some cases it looks like as shown below : <persistence-unit name="RamsEJBPU" transaction-type="resource-local">
<provider>org.hibernate.ejb.HibernatePersistence</provider>
<properties>
<property name = "hibernate.connection.driver_class" value = "oracle.jdbc.driver.OracleDriver"/>
<property name = "hibernate.connection.url" value = "jdbc:oracle:thin:@localhost:1521:orcl"/>
<property name = "hibernate.connection.username" value = "CHENNAISPAT"/>
<property name = "hibernate.connection.password" value = "CHENNAISPAT"/>
</properties>
</persistence-unit>
</persistence>Can you please tell me why is it so ?? -
Enable universal access for steam is not enabled - how do I turn it on?
In order to get some functionality from steam to be enabled, I understand I need to enable universal access for steam on my computer. When I try to do this, its greyed out showing it can't be enabled. How can I enable it / what would cause it to grey out? Here's the screenshot.
Hi there. Just spotted your question. Try clicking the padlock on the bottom left, enter the admin password and bob is your mothers brother. j
-
Hi All,
I'm working on an extranet and i would like users to be able to fill a form on the site.
Since i'm going to use sharepoint 2013 how can i configure sharepoint to use both anonymous access and windows authentication at the same time.
I know for sure it can be done but what can be allowed for anonymous access e.g specific list site etc..
I would need to make some area available as anonymous e.g a whole site as i would like to brand it a little to host the form.Any tips of who has configured similar would be appreciatedHi Patrick,
Thanks for posting your query, Kindly follow the below mentioned steps to enable Anonymous access to a SharePoint 2013 site.
In Central Administration, under Application Management., click Manage web applications.
Select the web application you want to enable anonymous access for.
In the Security group on the ribbon, click Authentication Providers.
In the Authentication Providers dialog box, under Zone, click Default.
On the Edit Authentication page, select the Enable anonymous access check box.
Click Save.
Close the Authentication Providers dialog box.
Also, browse the below mentioned URLs for more details
http://blog.cloudshare.com/2012/10/15/how-to-enable-anonymous-access-to-a-sharepoint-2013-site/
http://www.sharepoint-journey.com/how-to-enable-anonymous-access-in-sharepoint-2013.html
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh -
How to enable remote debugging for a session other than the current one
Hi all,
I am trying to figure out how to enable remote debugging for a session other than the one I am currently using.
More specifically, we have an application that is making database calls to Oracle 11gR2. Something is causing an exception during this invocation. My system is currently not set up to recompile said application, so I can't just add the debug call to the code and recompile. Therefore I would like to be able to log into the database (as sys, if necessary) and invoke dbms_debug_jdwp.connect_tcp on the desired session.
The docs indicate that I should be able to do so:
dbms_debug_jdwp.connect_tcp(
host IN VARCHAR2,
port IN VARCHAR2,
session_id IN PLS_INTEGER := NULL,
session_serial IN PLS_INTEGER := NULL,
debug_role IN VARCHAR2 := NULL,
debug_role_pwd IN VARCHAR2 := NULL,
option_flags IN PLS_INTEGER := 0,
extensions_cmd_set IN PLS_INTEGER := 128);
But when I try (even as sys), I get the following:
exec dbms_debug_jdwp.connect_tcp('1.2.3.4',5678,<session id>,<session serial>);ORA-00022: invalid session ID; access denied
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
00022. 00000 - "invalid session ID; access denied"
*Cause: Either the session specified does not exist or the caller
does not have the privilege to access it.
*Action: Specify a valid session ID that you have privilege to access,
that is either you own it or you have the CHANGE_USER privilege.
I've tried granting the 'BECOME USER' privilege for the relevant users, but that didn't help. I read something about having to set some kind of ACL as of 11gR1, but the reference documentation was very confusing.
Would someone be able to point me in the right direction? Is this even possible, or did I misread the documentation?Interesting deduction, that would be very useful indeed. I hate recompiling just to add the debug call, and it can't be done in our production environment. But it seems unlikely to me it would be implemented this way.
I would cross-post this in the SQL AND PL/SQL forum though, as this is really a database issue, not with the SQL Developer tool. Do add the links to the other posts in each.
Regards,
K. -
How to enable automatic punctuation on a new MacBook Pro with retina?
Can you tell me how to enable automatic punctuation on a new MacBook Pro with retina? Thanks
In which application? (There is no system wide punctuation.)
And how is the computer supposed to know what is the correct punctuation? For example "Let's eat, Mom!" versus "Let's eat Mom!" (Sort of depends upon whether your computer has weathered the zombie apocalypse, I guess.) -
Hiding Dock Automatically For Certain Applications.
I really don't like the way the dock and Adobe CS4 applications compete for the same screen space. Is there any way to turn on dock hiding automatically for certain applications?
Thanks. That's exactly what I'm looking for. However, while the Info.plist files for Photoshop and Illustrator match the example in the article, the one for InDesign is completely different: http://anonymousonlineserver.com/Info.plist
Any idea how to make the trick work with InDesign? Thanks. -
How do I limit access to certain (but not all) applications on my laptop?
Hello,
Is it possible to reduce access to certain applications (eg Email) while allowing other applications to remain "open" to all users?
I only have one account on my powerbook, and would like to simply prevent access to certain applications.
Any help will be greatly appreciated,
thank you,
nihalKorelice
you would need , in following Matt's advice to ensure that the restricted users were not created as admin users. That is, on creation do not click the 'allow this user to administer computer' box. If you tried parental controls on them, you would be told by the OS that you can't restrict an admin.
The better advice would be to restrict the actual use of the single user you have now, who is presumably an admin, to just admin (installations, re configs, set up new users etc) tasks. Change his password so those real people you don't trust (?) couldn't get to him. You could have a 'restricted' user who is not restricted in respect of apps (email, browser etc) but can't admin. Use him yourself for browsing etc and general use. Add another restricted user for(the kids, irresponsible friends and such) who are not admins and can only use certain apps. I am aware that is not precisely what you asked. -
How to enable push mail for gmail in iphone 6 plus
how to enable push mail for gmail in iphone 6 plus
Tommacgr wrote:
You can setup gmail account in iphone as exchange so the trick is simple and easy and push notification work after instantly . Just follow this steps http://email.about.com/od/iphonemailtips/ss/Set_Up_Push_Gmail_in_iPhone_Mail_Ste p_by_Step_Screenshots.htm
You can only set up a Gmail account as an Exchange account if you have a paid account. Google dropped Exchange support for free accounts two years ago. That link is just a bit outdated. -
How to enable cascade view for sites(iStore) in 11i?
How to enable cascade view for sites in 11i?
Hi,
For this issue, I'm trying to involve someone familiar with this topic to further look at it.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback
for TechNet Subscriber Support, contact [email protected]
Wendy Li
TechNet Community Support -
ESW: how to enable developer access to the ES workplace systems
Hi,
I received the access from ES workplace for ECC . But I dont have any authorization create any object , the role S_DEVELOP is not assigned to me ,
How to get developer access for the ES Workplace systems ( unable to creat new object ) ?
is it like that P users dont have developer access in all systems ?
How to get assign my user ID with the required roles ?
Experts Pls guide me on the same .
Regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Nov 27, 2010 6:01 PMhi,
it requires a userid and password to get authorization for developping object.
i already had these information but i don't know where should i use it to get authorization.
can anyone who already have passed through this problem can guide? -
How to change Apple ID for all applications in iPad2?
I have changed Apple ID via Settings > Store > Apple ID > Sign out my old Apple ID > Sign in with my new Apple ID.... But, by this method, Apple ID in iCloud, Facetime, and iMessage isn't changed follow to my new one! Do I misunderstand about changing ID? and How to change Apple ID for these applications?
PS. I do not want to do hard reset my iPad2
Thank you all for your kindly help ^^Go into Settings > iCloud > Account > Change to your new Apple ID
Settings > Messages > Recieve At > New Apple ID
Settings > Facetime > Change to new Apple ID -
How To run Currency translation for Consolidation Application in BPC NW
In "How To do Currency Translation for Financial Application in BPC 7 NW", the author mention that there is another "How To run Currency translation for Consolidation Application in BPC NW", anybody know where to get it?
Hi...
Check if the below links are useful to you.....
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6052a57b-8c64-2c10-b3a5-b0378ff21243&overridelayout=true
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0ea1fd8-d6d3-2a10-c1ab-e8164dd98316
You can find all How-to docs in the below link
http://wiki.sdn.sap.com/wiki/display/BPX/EnterprisePerformanceManagement%28EPM%29How-to+Guides -
How to capture memory usage for web application
In OATS openscripts, how to capture memory usage for web application? Does it have the exisitng java method that we can call to get the memory data (e.g. peak bytes, private bytes) consumed by web application?
JProbe
-
TS1702 HOW TO CANCEL AN SUBSCRITION FOR AN APPLICATION THAT DOES NOT WORK
HOW TO CANCEL AN SUBSCRITION FOR AN APPLICATION THAT DOES NOT WORK
Please stop SHOUTING at us.
http://support.apple.com/kb/ht4098
Maybe you are looking for
-
Creating multi rows in Weekly view for same Att type
Hi All, This is how we can reproduce the problem 1.Enter working hours against same att type for different dates in the same row in Weekly view of record working time. 2.Go to daily view and come back to weekly view. 3.It creates different rows for t
-
Album art not showing consistently on iPhone *lockscreen*
iTunes occasionally has trouble with album art, especially after syncs or updates (album art disappearing, or being reshuffled to the wrong mp3s, etc.). The current problem is different. Normally, with the iPhone's (iPod) music playing, the album art
-
Using SAP Exit Variable twice on the same report
Hello all, I need to use the same variable -Current Calendar Day (SAP Exit)- to filter against 2 characteristics on the same report. Unfortunately it's not possible, here the error: " Variable 0DAT is used in both (structure) element 11T4741S4XTWZUAJ
-
Milestone tracking from vendor side
Hi, Can someone tell me what is "Milestone tracking from vendor side" with respect to SRM 5.0. Any information on this is appreciated. Regards, Sonali
-
Converting RichInputDate to specific format
Hi All, greetings!!! I am using jdev 11.1.2.1.0 I have two input date component's on my JSPX. <af:inputDate label="From Date" id="fromDate" binding="#{DepositeLog.dtFrom}" autoSubmit="true" immediate="true"> <af:convertDateTime pattern="#{res