Keychain Items Deleted with Rest

I have created a keychain (separate from login keychain) and took the time to meticulously store all my internet & webform usernames and passwords. Several days later while browsing online, I did a "Reset Safari" and found that all those usernames and passwords in the keychain I created have vanished!
Anyone...
- Why did this happen?
- How I can retrieve my crital usernames and passwords?
- How I can avoid this happening again?
Thx/Peter
iBook G4 Mac OS X (10.4.9)

Thank you for your responses. I guess it is my mistaken assumption, based on reading keychain help files, that the keychain is a safe repository for vital information such as usernames and passwords. I can't find any info in keychain, Safari and/or Mac help files that say that keychain items are subject to erasing without warning.
To me, a very novice user, that is quite misleading and, now, very frustrating since I had only kept my multiple usernames and passwords in the keychain.
Peter
iBook G4 Mac OS X (10.4.9)

Similar Messages

PO line item delete with the customised message type

Hi,
My requirement is...In a Multiple line item PO if all the line items are deleted than it should not send any print to the vendor though the message option is set to Print immediatelly(NAST-VSZTP = 4).
These message type are customised output type like ZNEU.
I have tried to stop the print program which is calling the smartfrom.I am successful in stopping it by taking the deletion flag from the table ekpo table.But not able to make the traffic signal light to red.Because after the print program it is going to the RSNAST00 program and taking the value NAST-VSZTP = 4 and make its status to green and as well as processed.
Can any body suggested how to change this traffic signal light to red.
Regards,
Partha

Hi Raghavendra,
I understand that you are facing problems due to non-availibility of Header data in PROCESS_ITEM. But the same can be pulled live from the program. Sample pseudo code and reference link provided below. Hope it helps your ABAPer gain an insight.
REF: Getting Header Data in ITEM_PROCESS
DATA: ls_item TYPE mepoitem,
ls_header TYPE mepoheader,
ls_header_obj TYPE REF TO if_purchase_order_mm.
*Get PO Header data
CALL METHOD im_item->get_header
RECEIVING
re_header = ls_header_obj.
CALL METHOD ls_header_obj->get_data
RECEIVING
re_data = ls_header.

There are several login keychain items I'd like to get rid of. I've deleted them but they come back after several hours. How can I get rid of them for good

There are several login keychain items I'd like to get rid of. I've deleted them but they come back after several hours. How can I get rid of them for good.

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Is there a way to set which keychain item is used by default for a site/application?

This question applies primarily to the keychain in Mavericks, but also the iCloud keychain and its use in iOS.
There are several sites and services for which I have multiple logins that serve different purposes. Whether it's because they are business/personal accounts, or accounts that pertain to different functions, I have multiple logins for many sites/services I use daily, however, there is usually one primary account for each that I use for most purposes.
What I would like to be able to do is set which of these logins appears by default. An example scenario might be if I have an "admin" account on a site, and a "dev" account that is used for testing purposes to Q/A the site from the perspective of a user who doesn't have administrative access. Most of my work happens under "admin" but whenever I go to the login page, the "dev" account prepopulates in the login form and I have to start typing admin and select that. It also does this on my iPhone, which is where this issue becomes very cumbersome, because there is no dropdown for me to select which credentials to use to autofill from. It appears to only allow autofill from whatever it sees as the first account to come up, and I can't seem to change that without deleting all the other keychain items that come up ahead of the one that I want. This kind of thing also poses a significant risk of accidents if, say, I have multiple payment methods saved and the one that comes up by default isn't my personal payment method, but a business account that's only meant to be used for business purchases. If that comes up first, if I don't replace it with my personal details, I might accidentally place a personal charge on a business account.
So I really have 2 questions:
1) Is there a way to set the priority order of which account populates a form by default from the keychain?
2) When filling out credentials on iOS, an "autofill" button appears at the top of my keyboard, and I can begin typing in a field and it will show the autocomplete of the username that I am typing, but if I click autofill, it replaces it with the original credentials and not those of whatever I began typing in. If I click on the username it's autocompleting, it just clears the autocomplete. Is there some way to choose which username I'm autocompleting a form with?
Thanks to anyone who has any ideas about a solution to this, and if there isn't, and if anyone at Apple is listening, in an ideal world, it would be like setting the priority order of known wifi networks, where you can drag your first choice to the top of the list.

This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

Changing multiple keychain items to the same password

I work in a corporate environment that uses a Windows server with Active Directory to manage the company network. Macs are integrated to the network, but Open Directory is not being used.
The login for the Macs is the same as the network name and password. Whenever your password is changed on the network, you must update your login keychain to use that password too. The problem comes with other applications, such as Entourage, that use the same network password but store it in a separate keychain item. When the login keychain is updated to the new network password, the keychains for these applications are not and must be manually changed.
Is there any way to synchronize login passwords to keychain items? Is there a script capable of changing multiple keychains to the same password automatically? Is there third party software that is able to accomplish either task? A solution not mentioned?
Our company is currently using Snow Leopard but plans to migrate to Lion soon, so solutions for any platform are welcome.
Thanks to anyone that is able to provide information.
Regards,
JL

Hi Nishanth,
1) how to pass value one by one
in select options..we will be filtering the values in some table..example if s_ebeln is our select-options...then we will be doing a select..like...............
select fields from vbak into int_vbak where ebeln in s_ebeln
so if in the table int_vbak if field ebeln is there ..we will know which all ebeln is there..............
i.e,if range is 1 to 100 for s_ebeln and 1,2,99 are the only 3 ebeln present in table vbak as of now ...................
then in select query , we fetch ebeln into int_vbak as an additional field( if it is not a "select *") we will get all the 3 ebeln 1,2,99 into int_vbak.....so we can pass these fields one by one by looping at int_vbak and appending it to fresh internal table..........
declare an internal table with ebeln as the field..loop and do the append
*****putting values of ebeln into a new internal table
loop at int_vbak.
wa_ebeln = int_vbak-ebeln.
append wa_ebeln to int_ebeln.
endloop.
*******delete duplicate entries
sort int_ebeln.
delete adjacent duplicates from int_ebeln.
2) how to append and join the data in the v_postab
First..... declare another table same as v_postab say,v_postabfinal as example...........
after each "call function"...in the loop ...do the following...
loop ....
refresh v_postab[]. "clear before each fxn call
call function XXXX.
if v_postab[] is not initial.
append lines of v_postab to int_postabfinal.
endif.
endloop........
what this append statement does is that every time the internal table has some values..it adds these lines to v_postabfinal without deleting the old entries...so you will have all the values with respect to each value of select-options passed..
Hope i have made the idea clear with these examples
Pls check and revert
Regards
Byju

How to copy Configurator keychain items to user accounts

I'm managing a lab of iPads in an education environment. And have set up a "base" image for the iPads under an administrative account with Configurator. The Macbook is bound to the domain and I can authenticate with a number of users no problem, but if I go to try and manage the iPads, i get a "private/public key" error.
I've determined that the issue is with the Key items found under the keychain. If I copy the administrative keychain to the users profile and log in (forcing the login keychain update) it will work fine under the users account. but this is not something I want to do as it requires me to give out an administrative password. And if I delete the login keychain from the user template, the user generates new keys causing the error above.
So... does any one have any ideas how to copy keychain items from one user to the template user?

Move your itunes to library to a centralized folder. For instance directly on your hard drive. Then set your itunes library to that folder where all itunes media is kept, or only the items you wish to "share" between user accounts.

Keychain items mysteriously disappeared

After returning from a trip overseas, I came home to a computer with about half of the original keychain items saved. Initially I thought that my browser (Omniweb 5.5) was not accessing those items, but after opening up KC I was surprised to find about only 100 of the original 250 items there.
Any ideas? Can't recall if this happened before or after applying the latest security update.
Thanks in advance.

Thanks for the feedback.
Reset Safari, IIRC, also deletes your com.apple.Safari.plist, bookmarks, history, cookies, and any passwords to sites you've already visited that require them. As a precaution, whenever I plan on resetting Safari, I always make copies of these folders in ~/Library: /Cookies, /Keychains, and /Safari and the /Preferences/com.apple.Safari.plist and after resetting it, reinstall them if they were deleted or replaced
I think you definitely hit on what caused the problem. Good luck.

Keychain Items Disappeared!?

I think this is the right place to post this, but if it isn't, please let me know.
About half of the items I had in my Keychain have disappeared, they were there a few days ago, and today they're gone - has anyone else had this problem?
Yesterday I cleaned out Safari cache and deleted cookies - it's the only thing different I can think of that I did - but doing this shouldn't affect Keychain, right?
I'm at a loss and hope someone has some insight.
Thanks.

Well - after several attempts (Backup has it's problems), I was able to restore my keychain items.
According to a tech guy at my local Apple store, keychain items that are associated with AutoFill may be the only ones affected when I do my Safari housecleaning, not so much the cookies but emptying the cache and resetting Safari.
Because not all the keychain items disappeared, I may do a controlled experiment (now that I know I can restore from Backup), just to see which ones where affected.

Notification when shared item deleted

Hello,
When someone deletes an item shared with me, or just removes the sharing to me, in Filr 1.0.1.65 I do not get any notifications. Perhaps I am not setting up notifications correctly, but I cannot find anything in the documentation about notifications for changes in the sharing of a file. I do get notification when someone shares a file with me so I would expect notification when sharing is retracted in any way. Is this working as designed, or could it be a bug or configuration problem?
Thanks in advance for any assistance,
Janey

jclancy,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Safari keychain items

I updated to Safari 4.1.1 a couple of weeks ago. When I open Safari a pop-up appears with the following:
Confirm Application Change
Safari has been updated. Do you want to allow the new version to access the same keychain items (such as passwords) as the previous version? This change is permanent and affects all keychain items used by Safari.
I click 'Change All,' and then I can't use Safari for a couple of minutes, and all the other applications open at the time become really slow. The pop-up box appears every time I open Safari, even if I've already opened it earlier in the day and clicked 'Change All.' The pop-up box also appears when I visit a website, such as gmail, where I have information saved. So although I have already clicked 'Change All' I have to click it again and wait another couple of minutes before I can continue using Safari. It's really frustrating. Does anyone know what I can do?

HI and welcome to Apple Discussions...
Quit Safari if it's open.
Open Keychain Access (Applications/Utilities). From the Keychain Access menu bar click: Keychain Access/Keychain FirstAid. You may be prompted for your admin password. Select the Verify button and click Start. If there are any problems, Keychain Access will report them.
If Keychain Access reports, "no problems found" ... select Passwords under Category on the left then delete the "Safari Forms Autofill" keychain.
Relaunch Safari. Next time it asks for authorization, click "Always Allow".
Note. You may also need to delete the Google/Gmail keychain also.
If you still have problems, open a Finder window. Select your Home Folder in the Sidebar on the left. Then open the Library folder then the Preferences folder.
Move the com.apple.keychainaccess.plist file to the Trash.
Relaunch Safari.
Carolyn

Keychain Items Missing for Mail Accounts

Mac Mail keeps randomly prompting me for passwords for certain mail accounts. I keep hitting "OK" (without changing the pre-populated password) and eventually the account comes online.
I have noticed the the problem accounts do not have any corresponding keychain item for them. I have tried deleting accounts and then setting them back up, but no new Keychain item is created (older accounts have corresponding keychain items). The problem accounts are all POP accounts.
I have tried Keychain First Aid numerous times. No problems are identified.

Well what can tell you about Mail and Entourage,... Mail seems to be better integrated with OS X, and other Mac programs and since it is included with OS X - It Is Free!
To me Entourage has more the feel of MS Outlook so if you were a Win.. user you would most likely prefer it more. Entourage does have some sync services, ie: contact, iCal events, and notes with .mac, so I guess .me would also work, I don't use .mac/.me so someone else would have to fill you in there... this is my .02 worth.

How to set the conditions for item deletion approval workflow?

Hi,
I have created approval workflow for item modifications ie, when user try to modify an item, it will send a mail to Project Manager. For that I set the conditions in Change the behavior of the overall task: 1. When the task process starts 2 . When the task
process completes .
Change the behavior of the single task: 1.when a task is Pending.
[I followed this https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx ]
My Requirement is that I want to set this same workflow for the scenario: when the user deletes an item it will send a mail (intimation mail for item deletion) to Project Manager. here i dont want to send modification mails when user deletes an item.
When user modifies an item: 1. intimation mail, 2. Approve/Reject mail 3. intimation for approval / rejection mail.
When user deletes an item: 1. intimation mail.
How can we set it in one approval workflow?? where i have to set the condition for sending either item modification mails or deletion mail.
Thanks,
Praveen ji

Hi,
According to your post, my understanding is that you wanted to start approval workflow when item deleted.
You should first make some changes to trigger the workflow when you delete the item.
You can use the Event Receiver to achieve it.
In order to trigger workflow on item delete you need to create event receivers and from event receiver call the workflow already attached with list.
http://ravendra.wordpress.com/sharepoint-workflow-on-list-item-delete/
You can also create custom action to start the workflow, you can refer to the following article, then modify the workflow as your need.
http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=50
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Getting error while uploading multiple files in sharepoint hosted app in 2013 with REST API

Hi All,
In one of my tasks, I was struck with one issue, that is "While uploading multiple files into custom list with REST API".
Iam trying to upload multiple files in library with REST calls for an APP development, my issue is if i wants to upload 4 image at once its storing only
3 image file and further giving "Conflict" error". Below is the attached screenshot of exact error.
Error within screenshot are : status Code : 409
status Text :conflict
For this operation i am uploading different files as an attachment to an list item, below is the code used for uploading multiple files.
my code is
function PerformUpload(listName, fileName, listItem, fileData)
var urlOfAttachment="";
// var itemId = listItem.get_id();
urlOfAttachment = appWebUrl + "/_api/web/lists/GetByTitle('" + listName + "')/items(" + listItem + ")/AttachmentFiles/add(FileName='" + fileName + "')"
// use the request executor (cross domain library) to perform the upload
var reqExecutor = new SP.RequestExecutor(appWebUrl);
reqExecutor.executeAsync({
url: urlOfAttachment,
method: "POST",
headers: {
"Accept": "application/json; odata=verbose",
"X-RequestDigest": digest
contentType: "application/json;odata=verbose",
binaryStringRequestBody: true,
body: fileData,
success: function (x, y, z) {
alert("Success!");
error: function (x, y, z) {
alert(z);

Hi,
THis is common issue if your file size exceeds
upload a document of size more than 1mb. worksss well for kb files.
https://social.technet.microsoft.com/Forums/office/en-US/b888ac78-eb4e-4653-b69d-1917c84cc777/getting-error-while-uploading-multiple-files-in-sharepoint-hosted-app-in-2013-with-rest-api?forum=sharepointdevelopment
or try the below method
https://social.technet.microsoft.com/Forums/office/en-US/40b0cb04-1fbb-4639-96f3-a95fe3bdbd78/upload-files-using-rest-api-in-sharepoint-2013?forum=sharepointdevelopment
Please remember to click 'Mark as Answer' on the answer if it helps you

Exit / badi for individual service line item detail with internal orders.

Hello guys,
<b>Issue 1.</b>as per our scenario we want to get the individual service line item details with Internal Orders.
Please provide me any exit/badi with each item level with individual service line item Internal Orders.
<b>Issue 2:</b> Remain same for issue 3 for blocking status. We want to delete item level for particular line what about the service rows which assigned in particular item.
point will be rewarded for the suitabel answers.
please give me response ASAP.
With Regards
yogesh

Hey Yogesh,
I have the same scenario... Could you please drop a mail to [email protected] with the details of BADI and other details that you implemted for the same.
Thanks a lot in advance.

TS1702 i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!

That number is for an apple server in the UK that is used for iMessage activation. A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number. I suggest you turn iMessage off. In settings/phone turn on dial assist. Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage. Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.

Keychain Items Deleted with Rest

Similar Messages

Maybe you are looking for