Keychain problem freezes my programs-Please Help!
Note: I describe my problem starting when I updated Daylite, but the same thing happened with Safari.
After upgrading to a new version of Daylite, when I ran the program, I got a dialog box that said, "The 'Daylite' software on your computer has changed and wants access to your computer. Do you want to allow this?" I click allow and then I get a spinning beach ball for Daylite. Force quit takes a while, and even after quitting, my computer slows to a crawl.
I thought this was a Daylite issue, and posted a question on their boards, but just now, the same thing happened with Safari.
This must be a Keychain issue. I ran Keychain first aid and repaired permissions. What am I missing?
Thanks.
Steve
Hi ksjinesh
Provided that you have backed up your phone data you could try resetting your N70 *#7370#
Happy to have helped forum in a small way with a Support Ratio = 37.0
Similar Messages
-
my itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible
i think i might have a solution... i have windows vista and after i installed to latest itunes update everytime i tried to open it it would freeze. I tried everything, including uninstalling itunes and all of its components and reinstalled it numerous times. So i went to the itunes folder in my folders, not on itunes, and i deleted my itunes library and playlists. After that it worked just fine, all of my music was deleted but luckily i had my files saved elsewhere.
I hope this helped! I know its frustrating and APPLE/ITUNES NEED TO FIX THE PROBLEM!!!! -
i have windows 8 and I got this error "Adobe Photoshop has stopped working" whenever I start a program. please help. how can I fix this problem? many thanks
Please read these and proceed accordingly:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325 -
I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.
Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
Try a different port on the computer.
Does the iphone beep when u plug it up. ?
Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
Delete the apple mobile device from your computer.
Upgrade itunes to newest version.
Is you USB cord defective ?
Any USB 3.0 on your system ? .
Delete or Disable any antivirus program on your computer ?
I will tell u the problem is your computer not the phone.
We could do this for hours. -
My MacBook get's hot really quick and then discharge's quickly without opening any program, please help.
I have checked the cooling fan, and it's working, and I took it to an IT technician and he said my hardware is allright, so is it a problem from the OS it self??
OS X(10.8.5)Restart with the Option key held down and the Mac OS X install disk inserted, provide the firmware password, click on the DVD, press the button with the straight arrow, access the firmware settings, disable the password, and use FireWire Target Disk mode. If you can't do that or it doesn't work, contact Apple.
(38384) -
Hello I forgot my Security question of my Apple ID ? I don't kow what should I do and how to solve this problem ? could you please help ?
You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104569) -
Developer 6 Timer Problem... Please help
Hi all,
I have installed Developer 6(Oracle Product) on my system. I am facing a strange problem whenever I try to use Create_Timer built in. The cursor moves to starting of the Item being modified as soon as the space bar is pressed (timed for timer expiration). If I remove the Built-in the problem is resolved.
Please help urgently.
Regards
AnandUpgrade to the latest patch and the problem shoudl go away - this issue was fixed I think in 6.0.8.13+
You can also try setting Keey Cursor position to Yes on the item. -
HT1926 i've tried so many times but the problem still exists! please help!!
i've tried so many times but the problem still exists! please help!!
Could you describe what your problem is, please?
-
What to do when iTunes cannot sync my iPad 3. Problem Event Name: BEX (Please Help)
What to do when iTunes cannot sync my iPad 3. Problem Event Name: BEX
Please Help to solve...Hi Ahmed,
In iTunes, go to the Store in the left menu, select iTunes Store, wehn it opens, make sure you are on the home screen (icon of a house in the menu bar) and from the righthand side, select Account.
Next you will see all of your account information. Just a little don, you will find: Apple ID overview, there it says, Authorised computers; click on the button to deauthorise.
And you should be done.
Grtz, Carl. -
No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help me? Thanks
This is an annoying problem for many people. Most likely your dock connector (on the bottom where you plug in your phone) is dirty or screwed up and is probably just coincidence that it happened after you updated. Some people have had success cleaning the port with a dry clean tooth brush. There is a long discussion going on at the thread I linked below. Good luck...
https://discussions.apple.com/thread/2475631 -
Problem with simple drawing program - please help!
Hi,
I've only just started using Java and would appreciate some help with a drawing tool application I'm currently trying to write.
The problem is that when the user clicks on a button at the bottom of the frame, they are then supposed to be able to produce a square or circle by simply clicking on the canvas.
Unfortunately, this is not currently happening.
Please help!
The code for both classes is as follows:
1. DrawToolFrame Class:
import java.awt.*;
import java.awt.event.*;
public class DrawToolFrame extends Frame
implements WindowListener
DrawToolCanvas myCanvas;
public DrawToolFrame()
setTitle("Draw Tool Frame");
addWindowListener(this);
Button square, circle;
Panel myPanel = new Panel();
square = new Button("square"); square.setActionCommand("square");
circle = new Button("circle"); circle.setActionCommand("circle");
myPanel.add(square); myPanel.add(circle);
add("South", myPanel);
DrawToolCanvas myCanvas = new DrawToolCanvas();
add("Center", myCanvas);
square.addMouseListener(myCanvas);
circle.addMouseListener(myCanvas);
public void windowClosing(WindowEvent event) { System.exit(0); }
public void windowOpened(WindowEvent event) {}
public void windowIconified(WindowEvent event) {}
public void windowDeiconified(WindowEvent event) {}
public void windowClosed(WindowEvent event) {}
public void windowActivated(WindowEvent event) {}
public void windowDeactivated(WindowEvent event) {}
2. DrawToolCanvas Class:
import java.awt.*;
import java.awt.event.*;
public class DrawToolCanvas
extends Canvas
implements MouseListener, ActionListener {
String drawType="square";
Point lastClickPoint=null;
public void drawComponent(Graphics g) {
if (lastClickPoint==null) {
g.drawString("Click canvas first",20,20);
} else {
if (drawType.equals("square")) {
square(g);
else if (drawType.equals("circle")) {
circle(g);
public void actionPerformed(ActionEvent event) {
if (event.getActionCommand().equals("square"))
drawType="square";
else if (event.getActionCommand().equals("circle"))
drawType="circle";
repaint();
public void mouseReleased(MouseEvent e) {
lastClickPoint=e.getPoint();
public void square(Graphics g) {
g.setColor(Color.red);
g.fillRect(lastClickPoint.x, lastClickPoint.y, 40, 40);
g.setColor(Color.black);
public void circle(Graphics g) {
g.setColor(Color.blue);
g.fillOval(lastClickPoint.x, lastClickPoint.y, 40, 40);
g.setColor(Color.black);
public void mouseEntered(MouseEvent e) {}
public void mouseExited(MouseEvent e) {}
public void mousePressed(MouseEvent e) {}
public void mouseClicked(MouseEvent e) {}
Any help would be appreciated!Some of the problems:
1) nothing calls drawComponent(Graphics g)
2) Paint(Graphics g) has not been overriden
3) myCanvas is declared twice: once as an instance variable to DrawToolFrame, and once local its constructor. Harmless but distracting. -
Problem compiling my first program; Please Help me!
Please HELP, what am I doing wrong?
For over 5hours I have been trying to figure out how to compile a simple Hello world program using sdk1.3.1_02/j2re1.3.1_02 and I am getting the following errors: helloworld.java:2 cannot resolve symbol
symbol : class string
location : class helloworld
cannot reolve the string symbol
symbol : class out
location : package system
I want to program in java so badly but I am trying to get my environment set so that I can take off. To compile my first program has been a disaster!!
This is my path:
SET PATH=C:\WINDOWS;C:\WINDOWS\COMMAND;C:\JDK1.3.1_02\BIN
Thanks very much in advance
::(Java is case sensitive,
use String instead of string. and System.out instead of system.out
Sudha -
Video card or driver problems with an N200, please help!
I have a lenovo 3000 N200, it is really cool, runs even games quite well, including newer ones.
But, is it normal to for the display driver program to freeze out in Warcraft 3? It always does that, when accessing the list of maps in the game and after 3-5 mins during an actual game. It sets the resolution down to 640X480 (from 1280X800) and in 16 color. I have to reset it in order to make it work. Also it does the same in Spore - though after having the driver written for Spore installed, ( which I downloaded from lenovo's site ) I haven't encountered that problem so far. Also Second Life shuts down - thankfully it does not freeze the drivers. I understand that the model I have is not meant for gaming but if it can run Warhammer 40k: Soulstorm at meduim graphic settings (on widescreen) without a lagg I can't understand why it wouldn't be able to handle warcraft 3 - that even an ATi m200 express can handle. I mean an X3100 from Intel must be far more powerful. (Said ATi card laggs with older games like Unreal Tournament)
I have the latest driver - official - and a Win Xp pro Sp2. I always keep my system up to date - save for opsys but so far driver did not need sp3 - and virus clean.
Please help me?
Solved!
Go to Solution.Well, Unreal Tournament 2004 runs flawlessly on max graphics - though simple Unreal Tournament laggs like hell with all possible settings - also, as I said Dawn Of War and it's expansions run well on med graphics. The Suffering Ties That Bind runs also good on highest settings - though there is a bit of degradation compared to my tabletop pc's performance. Disciples 2 ran - of course - well, there were some texture problems with it but Heroes 5 ran quite well even on higher settings (as I mentioned it sometimes blunted down the textures but not always and it ran without a lagg). Alien Versus Predator 2 ran on max graphics, and there was no trouble, save for the aliens' special vision (that white thing that looks as if inverted colors) didn't work - aka was only a black screen - and that the crosshair of the smartgun was only a blank red/green block on the middle of the screen.Oh, and Command & Conquer: Generals Zero Hour works on highest settings without a lagg, along with Quake 3, and Jedi knight : Academy. It even runs Perfect World on high settings and only laggs in bigger towns - but that also might be because of the tremendous bandwidth usage that occurs. Even Red Alert 3 was able to run, but I would only advise that for RA fanatics, on low settings it was playable. Also, C & C: Tiberium Wars runs better than RA 3 , if you like that it is quite playable and worth a try. As you can see I have put it to it's limits to see what it can endure. Unreal Tournament 3 ran, though was gruesomely degraded and then it gave me the blue screen of death; so I quickly uninstalled that. Other than the forementioned program I had no real problems with the card, but the existing problems are a pain in the ... well we all know how bothering it can be when one is unable to play his/her favourite game (that should really run flawlessly).
Doesn't vista eat up too much of the system resources? A friend of mine was complaining about his n200 that vista is too slow on it and it eats up too much processor/memory.
Also, still no new on videocard front... Asked around if anyone knows, but I am guessing that maybe even Blizzard - referring to my Warcraft problem - shows more compassion to their forums and users than Lenovo, so I'll ask around there too. -
I suppose it is the problem with socket connection,Please help
Hi,
I'm trying to build a chat server in Java on Linux OS.I've created basically 2 classes in the client program.The first one shows the login window.When we enter the Login ID & password & click on the ok button,the data is sent to the server for verification.If the login is true,the second class is invoked,which displays the messenger window.This class again access the server
for collecting the IDs of the online persons.But this statement which reads from the server causes an exception in the program.If we invoke the second class independently(ie not from 1st class) then there is no problem & the required data is read from the server.Can anyone please help me in getting this program right.I'm working on a p4 machine with JDK1.4.
The Exceptions caused are given below
java.net.SocketException: Connection reset by peer: Connection reset by peer
at java.net.SocketInputStream.SocketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:119)
at java.io.InputStreamReader$CharsetFiller.readBytes(InputStreanReader.java :339)
at java.io.InputStreamReader$CharsetFiller.fill(InputStreamReader.java:374)
at java.io.InputStreamReader.read(InputStreamReader.java:511)
at java.io.BufferedReader.fill(BufferedReader.java:139)
at java.io.BufferedReader.readLine(BufferedReader.java:299)
at java.io.BufferedReader.readLine(BufferedReader.java:362)
at Login.LoginData(Login.java:330)
at Login.test(Login.java:155)
at Login$Buttonhandler.actionPerformed(Login.java:138)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1722)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:17775)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:4141)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:253)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:261)
at java.awt.Component.processMouseEvent(Component.java:4906)
at java.awt.Component.processEvent(component.java:4732)
at java.awt.Container.processEvent(Container.java:1337)
at java.awt.component.dispatchEventImpl(Component.java:3476)
at java.awt.Container.dispatchEventImpl(Container.java:1399)
at java.awt.Component.dispatchEvent(Component.java:3343)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3302)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3014)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:2967)
at java.awt.Container.dispatchEventImpl(Container.java:1373)
at java.awt.window.dispatchEventImpl(Window.java:1459)
at java.awt.Component.dispatchEvent(Component.java:3343)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:439)
at java.awt.EventDispatchThread.pumpOneEvent(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:131)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
My program looks somewhat like this :
1st class definition:
public class Login extends Jframe// Login is the name of the first class;
Socket connection;
DataOutputStream outStream;
BufferedReader inStream;
Frame is set up here
public class Buttonhandler implements ActionListener
public void actionPerformed(ActionEvent e) {
String comm = e.getActionCommand();
if(comm.equals("ok")) {
check=LoginCheck(ID,paswd);
test();
public void test() //checks whether the login is true
if(check)
new Messenger(ID);// the second class is invoked
public boolean LoginCheck(String user,String passwd)
//Enter the Server's IP & port below
String destination="localhost";
int port=1234;
try
connection=new Socket(destination,port);
}catch (UnknownHostException ex){
error("Unknown host");
catch (IOException ex){
ex.printStackTrace ();
error("IO error creating socket ");
try{
inStream = new BufferedReader(new InputStreamReader(connection.getInputStream()));
outStream=new DataOutputStream(connection.getOutputStream());
}catch (IOException ex){
error("IO error getting streams");
ex.printStackTrace();
System.out.println("connected to "+destination+" at port "+port+".");
BufferedReader keyboardInput=new BufferedReader(new InputStreamReader(System.in));
String receive=new String();
try{
receive=inStream.readLine();
}catch(IOException ex){ error("Error reading from server");}
if(receive.equals("Logintrue"))
check=true;
else
check=false;
try{
inStream.close();
outStream.close();
connection.close();
}catch (IOException ex){
error("IO error closing socket");
return(check);
// second class is defined below
public class Messenger
Socket connect;
DataOutputStream outStr;
BufferedReader inStr;
public static void main(String args[])
{ Messenger mes = new Messenger(args[0]);}
Messenger(String strg)
CreateWindow();
setupEvents();
LoginData(strg);
fram.show();
void setupEvents()
fram.addWindowListener(new WindowHandler());
login.addActionListener(new MenuItemHandler());
quit.addActionListener(new MenuItemHandler());
button.addActionListener(new Buttonhandle());
public void LoginData(String name)
//Enter the Server's IP & port below
String dest="localhost";
int port=1234;
int r=0;
String str[]=new String[40];
try
connect=new Socket(dest,port);
}catch (UnknownHostException ex){
error("Unknown host");
catch (IOException ex){
ex.printStackTrace ();
error("IO error creating socket ");
try{
inStr = new BufferedReader(new InputStreamReader(connect.getInputStream()));
outStr=new DataOutputStream(connect.getOutputStream());
}catch (IOException ex){
error("IO error getting streams");
ex.printStackTrace();
String codeln=new String("\n");
try{
outStr.flush();
outStr.writeBytes("!@*&!@#$%^");//code for sending logged in users
outStr.writeBytes(codeln);
outStr.write(13);
outStr.flush();
String check="qkpltx";
String receive=new String();
try{
while((receive=inStr.readLine())!=null) //the statement that causes the exception
if(receive.equals(check))
break;
else
str[r]=receive;
r++;
}catch(IOException ex){ex.printStackTrace();error("Error reading from socket");}
catch(NullPointerException ex){ex.printStackTrace();}
} catch (IOException ex){ex.printStackTrace();
error("Error reading from keyboard or socket ");
try{
inStr.close();
outStr.close();
connect.close();
}catch (IOException ex){
error("IO error closing socket");
for(int l=0,k=1;l<r;l=l+2,k++)
if(!(str[l].equals(name)))
stud[k]=" "+str[l];
else
k--;
public class Buttonhandle implements ActionListener
public void actionPerformed(ActionEvent e) {
//chat with the selected user;
public class MenuItemHandler implements ActionListener
public void actionPerformed(ActionEvent e)
String cmd=e.getActionCommand();
if(cmd.equals("Disconnect"))
//Disconnect from the server
else if(cmd.equals("Change User"))
//Disconnect from the server & call the login window
else if(cmd.equals("View Connection Details"))
//show connection details;
public class WindowHandler extends WindowAdapter
public void windowClosing(WindowEvent e){
//Disconnect from server & then exit;
System.exit(0);}
I�ll be very thankful if anyone corrects the mistake for me.Please help.You're connecting to the server twice. After you've successfully logged in, pass the Socket to the Messenger class.
public class Messenger {
Socket connect;
public static void main(String args[]) {
Messenger mes = new Messenger(args[0]);
Messenger(Socket s, String strg) {
this.connect = s;
CreateWindow();
setupEvents();
LoginData(strg);
fram.show();
} -
MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS and already replaced with new MLB, but the problem still persist.. able to run ASD EFI but ASD OS wont work.please help thanks in advance
Holy crap, I got it to work.
Essentially, I just waited until DiskWarrior reached Step 9 and told it to skip the step before it had a chance to freeze. It skipped successfully, moved on, rebuilt and replaced the faulty directory files.
So far the computer is booting like normal, I can log in, and I'm currently copying all of the data to an external as I type this.
I still have no idea why the computer wouldn't mount or boot to any drive, but I guess I'll deal with that later.
Maybe you are looking for
-
What happens when my rescue email no longer exists for my apple account
How do I change my rescue email for my apple account?
-
TS2446 how do I contact Apple support? the phone number in UK does not work and the website loops
I can't reset my security questions - it tells me they've sent the email to reset but no email arrives... the support system loops all over the place and takes you back to where you start in the end - with no help ANYWHERE. I looked up the Apple nu
-
How do I get my mail off my G3 and onto my G5 ?
I'm using a POP account, and getting my mail via Netscape. Is there a way to get all my old mail on the new computer ? Please keep your answers non-technical and simple. Trying to transfer mail to my G5, running OS 10.4.9. It's got a 2 ghz PPC proces
-
I have a field with a long message. Assuming that I cannot add substring function to the query, how can I shorten this field in Reports? Thank you.
-
Business content empty in BW 7.3 for datasources and infosources
Hi, We recently installed BW 7.3 system. I went to business content to install data source and it is empty. I double clicked RSDS and TRCS select object and they did not get the list of datasources and infosources. I checked the system status and th