Keyfigure amplified by 100 from FF

Hi all,
i'm loading a currency KF from a flat file, it seems to be loaded ok on the infocube but on the query it appears amplified by 100.
value on file: 17.34
value on IC: 17.34
value on query: 1734
- the keyfigure is a Z infoobject.
- the keyfigure is defined with 0LOC_CURRCY.
- the currency key on flat file is called UF.
- UF is not defined on TCURX, so there's 2 decimal by default.
- currency conversion is checked on infopackage.
- character for decimal separator on infopackage is ok with the file.
any ideas on how to solve this ?
thx in advance

Hi Juan.
This thread contains a workaround for your problem:
is conditional calculation in the report possible?
Hope it helps.
BR
Stefan

Similar Messages

Skype charged 100€ from my account WITHOUT my know...

Hello
I came back to home, and my paypal account was wiped out !
skype took 100€ from my account , and this is obvious hacker business .
I conctact with paypal and with skype , but what is so stupid is that , i see that many people are experiencing this in the forum , HOW COMES a very well known company cannot do nothing about that !!!!!
I have no idea how i will able to get my money back .
PLEASE HELP !!!

Dear Readers,
While I write here on the Skype Community, these recommendations apply everywhere now that account fraud is unfortunately becoming too commonplace with the advent of major retailers suffering security breaches:
Change the account password immediately. If you no longer have access to the account, please contact Skype Customer Service for further assistance. If you are signed on to your Skype account on multiple devices, please use these two commands:
/showplaces
Lists other instances where this Skype name is currently signed in.
/remotelogout
Sign out all other instances except the current one. This will also stop push notifications on all other instances.
Please review this FAQ article so you have the information at hand when you contact Skype Customer Service to report the unauthorized purchases: https://support.skype.com/en/faq/FA10384/why-has-my-credit-debit-card-been-charged-by-skype-when-i-h...
Please review these FAQ articles, as well: https://support.skype.com/en/faq/FA34505/what-do-i-do-if-my-skype-account-has-been-hacked and https://support.skype.com/en/faq/FA10920/what-can-i-do-if-someone-has-taken-over-my-account
Regarding PayPal, sign on to your PayPal account and cancel the funding agreement between PayPal and your Skype account.
Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
Skype is aware of existing problems with the website when contacting their customer service agents. If you experience difficulty reaching Skype Customer Service or find yourself redirected back to the Community, please try again using a different web browser and - most importantly - choosing a different path through the various drop-down menu options presented. Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also block reaching an agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Verizon Just Stole $100 From Me!!! Dont Use Them!!!!

Verizon stole $100 from me!! Even with receipts and documentation there calling me a liar. DONT USE THEM!!! Look in the forum and you'll they did this to other customers too. Im cancelling and changing to at&t tomorrow. DONT USE VERIZON!!!! THERE A BUNCH OF **** THIEVES!!!!

Unfortunately Tidbits is correct. Every carrier does unethical, that's a strong word, lets just say they really are not about the customer. Its about taking or making money not giving it away. They have quotas to meet just like everyone else. Just my opinion. Now an exec would look at this post and say that's insane, how would we still be in business. The fact of the matter is they all do it and if you want a phone your going to have to suck it up and they know it. I have been with every major carrier and they are all the same. Verizon doesn't stand out above any other carrier but then again nor do any of the others.

Multicube Keyfigure - to be selected from different Basis-Cube Keyfigures

Dear experts,
please give your advice how to do this:
Multiprovider based on 2 InfoCubes. InfoCube A containing keyfigure Z_KFA and InfoCube B containing keyfigure Z_KFB.
In the Multiprovider only 1 Keyfigure, containing both valued for Z_KFA and Z_KFB is needed.
So far only one basiscube with its keyfigure is shown for selection.
How can a keyfigure in MultiProvider be selected that it conatins both keyfigures of the basiscubes?
Thank you,
Angie

Hi Angie:
If you want to include the 2 Key Figures from your InfoCubes on 1 Key Figure on your Multiprovider you need to use the same Technical name for the Key Figures.
So you need to either...
- Rename Z_KFA (from your InfoCube A) to Z_KFB.
- Rename Z_KFB (from your InfoCube B) to Z_KFA.
Regards,
Francisco Milán.

1......100 from dual

Hi,
How to print 1..100 using dual table in a SQL statement(no pl/sql) ?
Regards
gopureddi

I should have added this works only in 10g :
SQL> select level from dual connect by level <= 100;
LEVEL
1
2
3
4
5
6
7
8
9
10
11
in 9i :
SQL> select level from dual connect by level <= 100;
LEVEL
1

Print DVD on Pro 100 from Photoshop

I can't figure out how to print directly to a DVD from Photoshop.
I can print with no problem from the Easy Photoprint app, I send the job and after a while the yellow light starts blinking like it needs paper. So I insert the disk tray and press the feed button and it prints no problem.
However, when I print from Photoshop, I select "Disk tray K" as the paper size, send the job, and the light starts blinking, just like before. But when I press the feed button, it stops for a couple seconds and then starts blinking again.
I'm having to save the file as a .jpg and bring it into Easy Photoprint, which is a real pain. Is there some trick to getting DVDs printed directly in Photoshop?

There will be no message to load the disk tray from PS. That is why I suggested he stay with the free included software.
I suspect that warning is to not try and load the disk tray while the printer is readying itself for printing.
As this is the first statement in the manual;
Placing a Printable Disc
To print onto a printable disc, place it on the disc tray supplied with the printer, then insert it into the printer.
My quote was, "Not after you send the job from PS." I have not tried to print a DVD from PS but I have done many from Easy Photo Print EX. It may not even be possible.
However, you cited a good point, better to be cautious.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Nilsa_VZ , i want to reply to your post "Incoming Call Block Limit Increased to 100 from 10" but...

you created a locked post in a new thread? how can you get any meaningful feedback like that?
i wanted to ask why i get error when i try to store more than 10 thru the myfios tv onscreen menu, while
i can enter more than 10 numbers thru use of web interface. do you know how i can get my fios tv onscreen
menu to accept and store more than 10 numbers to block calls from?
ÔƹÔ

does anyone else know how?
ÔƹÔ

Help: why a value of 100 from R3 becomes *0.0 on BW query?

When running a query, find most of the values in a column are *0.0. Check the corresponding field value on R3, find the values should be 100, why 100 on R3 shows *0.0 on BW query?
Thanks

see if you have restrictions in query.
Check update rules for the key figures,
check transfer rules.
also check if your result is showing amounts in multiple currencies.
Farhan

How can I amplify audio signals from wav file?(gain control)

I want to develop an audio equalizer using labview. How can I control the gain of the audio signal (amplify) using labview vis.

If your audio signal is in form of a numeric array or a waveform cluster, to amplify it, just muliply it with a numeric value
like in this VI
Regards
Dev
Attachments:
Amp.vi ‏51 KB

My 4 year old daughter bought a 100 from pole I tunes by accident what do I o?

What do I do my four year old daughter bought a game for 100 dollars on pole I tunes!

Hello Jennifer panagia,
The article linked below details the process of reporting this issue to the folks in the iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

Video recording 0% - Audio Recording 100% from Imovie 6

Hi,
Just read title ....
My recording video is blank and audio ok.
photobooth OK
i don't find this pb on forum

solved by update QT 7.1.2

Currency Report, CTRACK

Does anyone have feedbackon using currency report in Essbase 6.5.1 ?We have face a problem in 6.1.3awith using both current and constant rates,and were obliged to create a rate that represents current divide by constant to solve our problem. Does it mean something to anyone ?And what about CTRACK command, with fixing (or not) dimension that are not tagged ?Thanks in advance,my questions are large,i'm new in using these featuresBenoît

hi Srinivas,
take a look if the same problem
Keyfigure amplified by 100 from FF
Basic keyfigure value of the cube is multiped by 100 in the query result.
Re: currency prob with JPY
Japanese currency
hope this helps.

How to post 100 records from R3 to file in XI

Hi,
Can any one explain me how to post 100 from R3 using RFC sender adapter to flat file.
thanks
dhanush.

hi
Follow this link it is helpfull to you.
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=howtopost100fromR3usingRFCsenderadaptertoflatfile&cat=sdn_all
IDOC/EDI/ALE
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
Regards,
Santosh
Message was edited by:
Venkata Santosh Kumar Boddu

Defining 100 columns from single column

hi all,
i need to write an sp which returns many columns
i have code ,name,candidates,mark(0-100)
these are my columns in a table..
now i need to calculate columns 0-100 which mark having how many students..like
code name     [ MARKS- 1]                        [MARK- 2]       [
3]        [ 4]      [5 ] -----------[100]
01   eng          10CANDIDATES                    2
10         64         44--------------98
02   BEG          12CANDIDATES                   0
12          77         98                  21
FOR THIS I WROTE CODE LIKE
SELECT Name,Code,Mark,CANDIDATES
INTO #tmp
FROM TABLENAME
WHERE (CONDITION)
SELECT
Name,Code
,[1] = SUM(CASE WHEN Mark=1 THEN Nos ELSE 0 END)
,[2] = SUM(CASE WHEN Mark=2 THEN Nos ELSE 0 END)
,[3] = SUM(CASE WHEN Mark=3 THEN Nos ELSE 0 END)
,[4] = SUM(CASE WHEN Mark=4 THEN Nos ELSE 0 END)
,[5]= SUM(CASE WHEN Mark=5 THEN Nos ELSE 0 END)
,[6] = SUM(CASE WHEN Mark=6THEN Nos ELSE 0 END)
,[7] = SUM(CASE WHEN Mark=7 THEN Nos ELSE 0 END)
,[8]= SUM(CASE WHEN Mark=8 THEN Nos ELSE 0 END)
,[9]= SUM(CASE WHEN Mark=9 THEN Nos ELSE 0 END)
,[10]= SUM(CASE WHEN Mark=10 THEN Nos ELSE 0 END)
---SO ON UPTO 100---------------------------------------------
FROM #tmp
GROUP BY Name,Code
NOW ITS too big code to define upto 100, so how caan i define in easiest way like any loop way? and simple code..pls help
thanks in advance..
lucky

hi all,
i need to write an sp which returns many columns
i have code ,name,candidates,mark(0-100)
these are my columns in a table..
now i need to calculate columns 0-100 which mark having how many students..like
code name     [ MARKS- 1]                        [MARK- 2]       [
3]        [ 4]      [5 ] -----------[100]
01   eng          10CANDIDATES                    2
10         64         44--------------98
02   BEG          12CANDIDATES                   0
12          77         98                  21
FOR THIS I WROTE CODE LIKE
SELECT Name,Code,Mark,CANDIDATES
INTO #tmp
FROM TABLENAME
WHERE (CONDITION)
SELECT
Name,Code
,[1] = SUM(CASE WHEN Mark=1 THEN Nos ELSE 0 END)
,[2] = SUM(CASE WHEN Mark=2 THEN Nos ELSE 0 END)
,[3] = SUM(CASE WHEN Mark=3 THEN Nos ELSE 0 END)
,[4] = SUM(CASE WHEN Mark=4 THEN Nos ELSE 0 END)
,[5]= SUM(CASE WHEN Mark=5 THEN Nos ELSE 0 END)
,[6] = SUM(CASE WHEN Mark=6THEN Nos ELSE 0 END)
,[7] = SUM(CASE WHEN Mark=7 THEN Nos ELSE 0 END)
,[8]= SUM(CASE WHEN Mark=8 THEN Nos ELSE 0 END)
,[9]= SUM(CASE WHEN Mark=9 THEN Nos ELSE 0 END)
,[10]= SUM(CASE WHEN Mark=10 THEN Nos ELSE 0 END)
---SO ON UPTO 100---------------------------------------------
FROM #tmp
GROUP BY Name,Code
NOW ITS too big code to define upto 100, so how caan i define in easiest way like any loop way? and simple code..pls help
thanks in advance..
lucky
Please post the create table script and sample data.
- please mark correct answers

Driver for Labview for ATE-100 pressure calibrator from Ashcroft Inc

Guys,
I need a subVI to communicate a pressure calibrator model ATE-100 from
Ashcroft (http://www.ashcroft.com/products.cfm?doc_id=348) with a
Labview application. The equipment has been originally shipped with and
old exe file supposed to do the job, nut I could not manage to make it
run. So I was searching for a way to exchange data it reads with the
Labview application I am writing. It seems to be standard RS-232
protocol.
Can anyone help or give me some hints?
Thnaks a lot,
Pixinguinha

The NI Instrument Driver Network doesn't have an instrument driver for this unit, so it looks like you're going to have to write your own drivers. You will, of course, need the programming manual from the manufacturer. This isn't all that difficult as there are tons of examples. You can just pull down, say, an instrument driver for a multimeter with a serial interface to see how it's done. To just try out serial communication you can use the "Basic Serial Write and Read" available in the LabVIEW examples. From the LabVIEW menu select Help->Find Examples. Change to the "Search" tab and enter "serial" in the search box. You'll get several examples.

Keyfigure amplified by 100 from FF

Similar Messages

Maybe you are looking for