Keyfigure display in update rule is not there!

Hello Experts,
I followed the steps provided to create the snap shot ods for stock initialisation based on the how to inventory management document.
I created three key figure info objects and created a ods as given in the document!
When I create update rule the key figures are not shown in the update rule but it shows the units in the update rules that are used by the key figures!
I gone through the OSS Note, the information is to have support package 10 implemented but we have support package 21(SAPKW35010 but already we have SAPKW35021) (BW 3.5)
Still the problem Exists while creating the update rule!
Suggest me where I am wrong!
Points will be awarded
Regards
Ram

Hello,
Help me on this issue please!
if further informations are needed or my question is not clear please revert me back i will give more information!
Thanks in advance!
Regards
Ram

Similar Messages

Request does not contain any saved update rules; rollback not possible

Hi,
In BW on hana, there's a 3.x flow DSO where it loaded a request from PSA.
It failed due to activation error SID Generation. But unfortunately, due to PSA Deletion process chain, it's PSA Request got deleted.
Now, we couldn't delete the red request(failed request) from the 3.x flow DSO.
If we try to delete, it shows job has been completed successfully with the following message:
Job started
Step 001 started (program RSDELPART1, variant &0000000004233, user ID )
Delete running: DataStore object ZREBATE, from 630,138 to 630,138
Delete is scheduled; Selection conditions were substituted
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Job finished
I went to the table RSICCONT and checked the mentioned request. But I couldn't find delete option enabled. Even our basis team doesn't have authorization to delete the mentioned request from the standard table RSICCONT.
Request you to please help me how to handle this.
Regards,
Antony Jerald.

Hi Antony,
Once you have deleted the data in PSA there is no way to reconstruct the request hence you can do below things to correct it
1) Identify the No of Records which having error , because if you have more records it will take more time as in debug mode we have option to edit only one record at one.
2) Display only one record in Active table and change it using the Debug option ( not recommended ), but as you are in corner we need to use this
3) change the records with respective values and active the request again
Regards
Jagan

0PS_C02 update rules are not getting activated when i install 4rm BI conten

Hi All,
In BI Dev. sys for PS module- Project System - Dates 0PS_C02 cube- update rules are not getting activated when i install from the business content and its giving the error " IC=0PS_C02 IS=0PS_DAT_PRJ error when checking the update rules Message no. RSAU461" .
I deleted the inactive update rules(6 nos) and installed again from BI Content, then the same issue raising.
Can anyone help me out as i stuck up with this to move to go-live.
Thanks,
Sakali

Hi Vassu,
here are some of the reasons for getting error in update rules activation.
1. Check the formula or routines that are used in Update rules and check is there any syntax errors.
2. check whether the mappings are correct or not.
3. check the info objects which ur used for mapping are in active or not..
(or) if the info object may be deleted which ur using for mappings.
Thanks
Sai Chand.

Update rules are not active

update rules are not active when transported to quality.
what can possibly be the error. where to check and correct this issue ?
thanks,
Amit

Amit,
In your update rules ,i hope there some start routine of update routines couls be there and those rotines didn't transported successfully .Check your update rules in DEV
Regards
Prasad

3.x Update rules does not appear in std 0IC_C03 business content

Hi,
We are using BI 7.0.
When trying to install business content update rules for the cube 0IC_C03 (DATA FLOW BEFORE), the three update rules are not appearing in the screen for installation.
Instead , I'm getting three Transformations !! But I need 3.x Update rules only.
Note : The data source used are of type 3.x ONLY.

Hi,
When you Create the update rules manually by default Keyfigures will be set to no-update. You have to propose the rules as you want and it depends on the requirement. And for 0IC_C03 Inventory Cube, almost all the Kfigs are updated based on Routines.
So it is better to Install from BI Content.
Replicate your Datasources. Then Install Transfer rules,and then Install update rules.
Hope this Helps,
Regards
Karthik

0SD_C03 transfer rule and update rules do not exist in BI Content

I am working on SAP BI 7.0 support level 16 and BI Content 703 support level 9.
I am not finding these objects in BI Content for the Sales Overview Infocube 0SD_C03:
Update Rules do not exist for 2LIS_11_VAKON,
2LIS_11_VASCL, 2LIS_11_VASTH, 2LIS_11_VASTI, 2LIS_11_V_SCL,
2LIS_11_V_SSL, 2LIS_12_VCSCL, 2LIS_13_VDKON.
Transfer rule does not exist for
2LIS_13_VDITM, but exists for all other DS.
7 Transformations exist only for:
2LIS_13_VDITM
Can somone help me out with why this is so? Which datasources are to be used for 0SD_C03, 3.x or 7?
This is an urgent requirement.
Regards,
Sony

Most of the problem has gotten solved by our upgrading to BI Content level 17.
The others, i made a direct mapping of some of the transfer rules manually.
It is working fine now.
Thanks for the replies.
Sony

Added fields doesn't display in update rules

I added new fields in the infocube and these fields are not getting displayed in left side pane of update rules to apply the logic. Can some one help me in this issue.
Thanks in advance,
Tony

I assume you activated the cube once you finished adding the fields...
Close your session, logout of BW and then open it again and check... It has happened to me... One of those things that doesn't make sense...
Another thing would be to delete the update rules and create them again, check that fields show...

Update Rule Routine not deleted properly

Hi all
I have deleted a routine from an update rule, removed the key figure from the infoprovider and reactivated both the ODS and the update rule.
The update rule therefore no longer contains the datafield.
Unfortunately the the code for the routine still exists in the system (RSAABAP and other tables) and references in this routine to other fields are preventing me carrying out other actions, so I need to properly remove the routine from the system.
I cannot go back to the old generated code for the update rules as there is no version management. I have tried putting the field back on the ODS and recreating the routine, but the system generates a new key for the routine so it looks as though I have lost the link completely.
Any suggestions? Is there a way of deleting an object type R3TR ROUT consistently without doing it through the Update rules change screen?
Regards
Hayley

Hi,
Let me give the solution, we are also having the same issues..
thanks in advance
sree

Updates rules are not active when transported from developmet to quality

Dear friends,
I had made some in changes in strat routine in update rules BW development and saved in request and transported to qaultiy
se09-child request -parent request -
In bw testing I have activated the update rules and saved in different request but I now updates rules not acitve .
Please suggest me where ihave gone wrong ..
Regards
shekar reddy

Hi Sriram,
Download the below documents for reference related to Transports
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50b1d20e-c1e8-2c10-d9b9-d48eb3a83d89
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/205caa59-a948-2e10-b397-9ccafd3d4f5b
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2050db8b-9d90-2c10-2980-b13a4b0938f6
Regards,
Venkatesh

Update rule could not be found during business content activation

Dear BW experts,
I am having an issue activating business content for an update rule (2LIS_03_BX) for 0IC_C03. Below is a log of the error. It seems like the system is not recognizing the update rule for some reason. Can somebody please help shed some light on this.
Installation (simulation mode) of: Update Rules (UPDR)
Transfer/Merge of the Content Version (Object Type Update Rules )
Object Update Rules BW9VUFZSUYTTIZS0HT9I4U3RP: Installation of the Content Version
Transfer update rules IC: 0IC_C03 / IS: 2LIS_03_BX
Object UPDR BW9VUFZSUYTTIZS0HT9I4U3RP could not be found
Transferring the 1 objects from type UPDR took 1.2 seconds
Post-processing of Objects after activation
The post-processing lasts 0.0 seconds
Thank you.
Andrew

Ravi,
Thanks for you reply. I checked the underlying cube (0IC_C03) and the info source (2LIS_03_BX) and they are both active. I didn't choose the option in data flow before and after because it would have brought way too much contents which I don't need. Instead, I only activated the info source and update rule individually. All three info sources (2LIS_03_BF, BX, UM) and the info cube were successfully activated. I am only having problem with the update rule.
Any other ideas?
Thanks,
Andrew

HT4623 i cant download any apps as it says i need ios 5 or above so i go to setting generall and then go to look for update and its not there what do i do now

i have got my brothers ipod on my itunes account, he is wanting to down load apps but its not letting him as it is saying he needs to hav IOS 5 or above. so i have followed steps settings, general, update. but when i get to the update bit there isnt an option to update, now i dont know what to do

You can not update directly from your iPod Touch until iOS 5 or later.
What generation iPod Touch do you have?
Here are the most current iOS for each generation of iPod Touch:
1st Gen iPod Touch - iOS 3.1.3
2nd Gen iPod Touch - iOS 4.2.1
3rd Gen iPod Touch - iOS 5.1.1
4th & 5th Gen iPod Touch - iOS 6.1.3
If you have a iOS 5 supported iPod Touch then you can connect the iPod to iTunes to update:
http://support.apple.com/kb/ht4623
Scroll down to the "Update your devive using iTunes" section

HT4623 What happens if the Software Update option is not there in the General Settings?

When downloading Apps on to my iPad it tells me that I require iOS 5 or higher, and yet there is no facility I can find to upgrade the iOS.
There should be Software update option in General Settings but there isn't, and there doesn't appear to be a download facility in iTunes either.
Rather confused?
Any help would be good

Update to IOS 5 or higher
http://support.apple.com/kb/HT4972

HT1483 Software updates in general not there!

Ok I tried to update my iPod touch 4th generation by going to setting - general - software updates. I went to general and software updates wasn't there! I am trying to do this mobile! Please help!!!

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

Can not view update rules on production BW server

This can be quite a time-consuming problem as I can't always tell if the latest update rules are successfully transported to production.
Most every where else in production I can choose to DISPLAY however this is not the case with update rules only.
Is this a typical setting for most companies? Can I turn off this setting so I can at least DISPLAY the update rules?

hi,
as far as I know you can only see any rules (transfer, update etc.) in BW in change mode.
if you know where to change this setting (i.e. to see rules) - do it
you only have to remember to change it on dev and transport.
Regards,
Andrzej
ps. work around would be to debugg it with simulate data package processing, how to do this?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/advanced sap bw data transformation
page 12
Message was edited by: Andrzej Krysiuk

RS_EXCEPTION230 object Update rule not found

hi guys
while extracting the standard business content for 0gl_account i am facing the problem RS_EXCEPTION230 update rule object not found .The update rule appears as a white.
please help as this preventing me to move forward
thanks
nitin

Exactly, i had the same problem and have solved it as follow:
First you have to select the update rules (for example) and transfer them (you have to select the option 'Transfer', of the 'Transfer command), you will see that they will be activated without error, next step you can simulate them or include them into an order to transport to another environment.
Hope this help.

Keyfigure display in update rule is not there!

Similar Messages

Maybe you are looking for