KeyFigure from MultiCube not visible in Query Designer

Hello,
I'm facing a strange issue. I added a new Key Figure to a MultiProvider. All identifications have been done and MP is active.
However, when I try to create a new query on top of this MultiProvider or change an existing query , I cannot see the new KeyFigure in the list of Key Figures.
Has anyone any idea how this can happen and what can be done to get this resolved?
I haven't ........

Just resolved it by simply doing a re-activation of the MP (even if it already was active ????).

Similar Messages

  • New key figures in multiprovider not visible in query designer

    Dear Experts,
    I added a cube and  keyfigures to the multiprovider definition.
    The multiprovider is activated successfully.
    The added keyfigures come only from this new cube.
    I  identified these new keyfigures to this new cube only.
    There is an existing query based on old version of the multiprovider without the new cube.
    When i relaunch query designer and re-open this query, i could not see the new keyfigures.
    When i create a new query, also its not showing the new keyfigures.
    Is there something not refreshed that I do not see these new key figures?
    Kindly advise. Thank you!
    Best regards
    Bass

    Hi,
    Some time it happens that newly added key figures and characteristics are not visible immediately in Bex query designer. Just check for warnings if any encountered while activating else try editing and re activating your Multiprovider and also proper field assignment.
    Newly added Key Figures should be visible in both New and Old queries without any differentiation. Just log off and log in back after some time, there is a good possibility that this inconsistency would be resolved.
    Regards
    Raj Rai

  • Attribute not visible in Query Designer

    hi BI Gurus,
    I could not see some InfoObjects(Attributes) which are marked Authorization Relevant, in the query designer. And the strange thing is, they are not visible even for the user with SAP_ALL and 0BI_ALL assigned. The authorizations for the  cube in which the main char is used looks fine.
    I have checked all the options in RSECADMIN, everything looks good.
    pls help me in finding the solution..
    thanks
    Cnu..

    check out with the info object screen in attribute tab, navigational attribute on/0f switch box, if u r using FF source system.
    check out with the infocube whether u r checked the check boxes in navigational attribute tab.
    regards
    harikrishna.N

  • Variable not visible in query designer

    Hello,
    I have 4 variables created for an InfoObject. But for one of my query written on Infoset, under that InfoObject in query designer it only shows me 2 variables.
    Any ideas what is causing the other 2 variables not to be visible?
    Thanks in advance,
    vamsi.

    which type of variables have you created?
    Regards,
    Chandra.

  • Hierarchy not visible in Query designer

    Hello Experts.
    I am trying to create a query in BW 3.5 but I ran into one issue. I created a hierarchy for an Infoobject. But I am not able see this Hierarchy for the Infoobject in BW 3.5 Query designer although I can see it in BI 7.0 Query designer.
    Any help in this regards will be appreciated and points will be assigned.
    Than

    Check if you have made the "hierarchy" Active in your BW 3.5 query and also chosen the hierarchy correctly.
    Right click on the characteristic----
    > properties.
    Hope this helps.

  • BC installed BEx Variables are not visible in Query Designer

    Hello,
    I have installed SAP Exit BEx Varibales from Business Content (0P_KEYDT, 0P_KEYD2 and 0P_KEYD3)
    sucessfully.
    But when I am not able to see these variables in the Query Desginer ( Need to restirct these on Net Due Date, Posting Date).
    Please advise me on this.
    Thanks,
    Geetha

    Are you sure you have the characteristics on which these variables are defined  y SAP are in your data target?
    Pl check this out. Alsso, sometimes, if you log out and get back, it may help.
    Ravi Thothadri

  • Mapped characteristics in Multiprovider not available in Query Designer

    Hi,
    we have a multiprovider with approx 10 cubes and lot of characteristics, Navigational attributes mapped to it. I have added around 3 more characteristics and mapped to underlying cubes. But these added characteristics are not visible in Query designer.  Is there maximum limit for the number of characteristics.
    Thanks,

    Disconnecting the BEx made it work. But i dont understand i added this yesterday in the multiprovider. But i also removed some navigational attributes from the mapping. I will re-map and check. Thanks for the tip.

  • Infoobject in infoset but not displaying in query designer

    Hi,
    I have created a query on infoset(ods1 & ods2).
    a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
    pls give your inputs,for why this infoobject is not available in query designer.
    Thanks
    Radika

    Hi Radika,
    I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
    Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
    Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
    Do this and see if it helps.
    Thanks & regards,
    Nikhil

  • Hierarchy node not available in Query Designer

    Hello Gurus,
    I can find the hierarchy node variable in BW but it is not available in query designer. Does anyone know what might be the problem and a solution?
    Thanks,
    Mark

    Hi Mark,
    You said you "find the hierarchy node variable in BW but it is not available in query designer".
    How did you find the hierarchy node variable in BW? From backend SAPGUI, you will only be able to see the variable in some internal tables like RSZGLOBV. Did you mean this?
    For "it is not available in query designer", do you means that when you want to create a hierarchy node variable for this characteristic in Query Designer, you don't find this certain hierarchy node variable in the hierarchy node variable list?
    Important thing to notice is that, flat value variables and hierarchy node variables are listed separately. Did you make sure that you have chose to list hierarchy node variables in Query Designer?
    Regards,
    Patricia

  • Document Link Item Icon not visible at query execution

    Dear Colleagues!
    How can I acheive to have the comment-icon visible when I open a query with comments in BI Portal, as a default?
    I have set som settings for the properties of the Query in Query Designer. As it is now I have marked for Document Links, Master Data and Info Provider Data, under presentation of the query as a whole.
    Still, when I execute, I can not see any icons. But if I enter settings in the web, and mark for Document Settings for data, the icons appear.
    I do not want the customer to have to do this settings each time they ececute a query from the portal. Rather I want the Document Link Icon to be visible by default. How can I get my settings in the query designer to be counting in fromt of the settings in the template?
    Regards Silje

    I figured this one out myself. There is a setting in Web Application Designer, directly on the query in question. In properties for the query I tick of "Document Links Visible".
    Regards Silje

  • Keyfigure display attribute not visible in the report

    Hi,
    I am facing a problem. I have <b>keyfigures as display attributes</b> in my master infoobject. Earlier I was able to see those <b>display keyfigure attributes</b> in my query and was able to use them in it. After that, few changes were done to the master infoobject (addition of few attributes and deletion of few - but none of them were what I was using). Now after the change, when I open the query in design mode, it gives me error saying that it can't access those attributes (only keyfigure display attributes) and repairs the query (removes those attributes). All the other attributes are visible.
    I have already tried rsrv for the master infoobject (corrected the error) and rsrt for the query. After that also it doesn't solve the problem.
    What could be the reason? Any pointers would be highly appreciated.
    Thanks,
    Saket

    Hi,
    Display keyfigure attributes are visible in the reports because I was using and running them in the reports before the change in that particular master infoobject. Only, keyfigures maintained as attributes can't be made navigational (hence can't be used for drilldown). Its only after the change, there is this error.
    I had also checked the authorization for Keyfigure earlier, which I have. Therefore its not the problem.
    Thanks for the help anyways! Any more pointers? Btw, I am working on BW3.5.
    Thanks,
    Saket

  • Paid Down Payment Request from 2007 not visible in 8.8

    Hello experts:
    I recently upgraded a customer from 2007 to 8.8, and an existing fully paid down payment request is now not visible anymore in the "incoming payment" window due to some of the changes in 8.8. But I also cannot reconcile the transaction because paid down payment requests cannot be reconciled.
    I tried to cancel the incoming payment in order to apply it differently, but that also fails with a strange error message ("Cannot cancel payment: One of the credit notes has been deleted. [3524-6]").
    I could create a JE to transfer the balance from the liabilities account to the asset account within the BP, then reconcile the two transactions in the asset account, and effectively having zero balance in the liabilities account, but I'd like to reconcile the two transactions in the liabilities account as well, so that they're really closed.
    Any ideas?
    Thanks in advance.
    Joerg.

    Thanks for your reply Jitin.
    My issue is related to A/R, so the mentioned query doesn't turn up any results. However, a few minutes ago, the same issue appeared in A/P, so I tried the query again, with no luck.
    I will proceed to log a support message and post back with the solution.
    Thanks,
    Joerg.

  • How To Make Infocube Visible in Query Designer?

    hello,
    i'm using BIW 3.10, i've just created infocube and succesfully populated it with data. I went through all the process from datasource (from R/3 masterdata), infosource, infoobjects and so on, until i get to browse the content of the infocube using the "Manage Data Targets" screen of rsa1->modeling->InfoProvider->Manage. Now my problem is how do i make the infocube visible in the Query Designer?
    thanks,
    sid

    hi sid,
    you have open bex analyzer, and click 'query', in next screen 'sap bex : select query', click 'new' (icon blank page), and click 'infoarea' in left side, you will see the infocube under your infoarea. hope this helps.
    for new infocube, when there is no query created from this infocube, the infocube will invisible, since the screen is to select existing queries.

  • SAP-Exit option not available in Query Designer

    Hi,
    I'm trying to create a variable in BEx Query Designer that is processed by a SAP-Exit . But I don't have the option "SAP-Exit" in the drop down menu for processing type (from SAP-Help: In the variables editor, choose the processing type SAP Exit from the General tab page.).
    Am I missing any rights? Any ideas where the problem might be or is this just not possible at all and I have to use a customer exit?
    Regards,
    Alexander

    Hi, I think I didn't explain my problem right:
    I'm trying to use a variable in BEx Query Designer created by SAP that will be processed by a SAP-Exit. How can I add a SAP variable in BEx? I thought I have to create an own variable and assign "SAP-Exit" as processing type . But obviously this is wrong as I don't have the option for processing type "SAP-Exit". Any ideas?
    Thanks,
    Alex

  • Subtraction of 0Base_line date from 0Clearing date in the Query designer

    Hi
    How to subtract  0Base_line date from 0Clearing date  in query designer??
    I tried using 'Selection' by taking both 0Base_line and 0Clearing date separately in different selection and then subtracting them using formulas. But when i run the query,it is giving error "Use keyfigures in the selection".
    Pls suggest. Itz very urgent.
    Regards
    Deepak.

    Hi
    Thanks for your prompt reply.
    But if any of the date is 'blank' then while subtracting 0Base_line date  from 0Clearing date it is giving some value (like 78,90345).Actually i want *'No of days'* to be displayed.
    Date format is dd/mm/yyyy (12/6/2007)
    Pls help.
    Also i want Grading to be assigned in alphabets(as A, B and C) instead of numbers (1 ,2 and 3). Is there any way in Query designer to achieve such type of grading?
    Pls suggest
    regards
    Deepak

Maybe you are looking for