Keyfigure has value in BEx query, but shows zero/0 in Webi

Hi community,
I have the following issue with a Bex query with 2 structures:
in Bex, the budget column shows figures right. but in Webi, it shows zero for certain profit KPIs (calc. keyfigures, CKFs).
only for these KPI cells, it is not a general issue with that budget column!
in the Bex cell editor, I have created cell references for these profit KPI cells, but that should not be relevant.
As SAP cannot connect to our BO Webi via OSS properly, I would like to address you.
anyone had a similar situation or solution?
every hint is appreciated! Many thanks and
best,
Phil

Hi Ingo
I am also currently meeting such a problem.
I have Cubic Meter stored in my cube and my BEx query. Also, in my BEx query, I have a unit conversion to convert Cubic Meter to Cubic Feet.
In WebI, when I pull out both Cubic Meter and Cubic Feet, Cubic meter returns me 0, while cubic feet returns me a figure.
Below are the settings of the BW & BOBJ system:
SAP BW SP6
BOBJ SP2 FP2.3
Hope to hear from you soon.
Thanks!

Similar Messages

CHAR's value in the query but not in the report??

Hi all,
I loaded master data and crm transaction data from ODS to Cube. The data is in the cube but there is no value in my report when running it. EX: there are some CHARs in my report, I checked those CHARs have value in the query but it shows 'not assign' in my report when I run it. What happen?
Thanks.
J.

Please see below text and also the sent link..
If a navigation attribute is used in an aggregate, this aggregate has to be adjusted using a change run as soon as new values are loaded for the navigation attribute (when master data for the characteristic belonging to the navigation attribute is loaded.) This change run is usually one of the processes that are critical to the system performance of a production BW system. This is why, by avoiding using navigation attributes or not using navigation attributes in aggregates, you can improve the performance of this process. On the other hand, not using navigation attributes in aggregates can lead to poor query response times. The data modeler needs to find the right balance.
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
cheers,
Vishvesh

Default value of BeX customer Exit variable not Displayed in WeBI??

Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

Hi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H

Results based on From and To value in Bex query designer.

Dear all,
We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
How to get my requirement achieved in the Bex query designer.
Experts suggestion with steps will be very useful to solve my problem.
Regards,
M.M
Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

Hi Magesh,
I think you could try one more way.
Create a formula inserting your two formula variables for limits .(FV - are ready for input ) .
The formula would return the result as 1 or 0 because it would have boolean condition in it.
You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
You formula A would look like
( KF > FV1) AND (KF < FV2) * 1.
And in the condition put A EQ 1.
You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
Regards,
Sunmit.

BEx Query- Making into Zero value in the blank row/column

Hi All,
I am running a query on multiprovider, say I have three characteristics (sales org, distribution, customer) & key figure (amount) in the layout. I am lookling the actual & plan data in the report. If there is no plan data for the above combination of characteristics, in the report i am getting blank, instead of blank i want $0.00, how to do this?
Regards,
Anand

Hi ,
Could you please let me know how can we fix this issue. I tried to create a new formula as KF+0 but it did not work.
Hi ,
This issue is in a Bex Query . We are looking for options on how to display blanks as zeros for keyfigures.In the below screen shot highlighted in red there is no data for march 2015 so it needs to display as zero and the overall result should be Zero.
Issue : Overall Result for Cumulative Quantity FTE should pick up the last value which is Mar 2015 instead its displaying 2 as there is no data for Mar 2015.
Thanks,
Bharathi.

How to pass parameter values to Bex query through xcelsius (LO or QWAAS)

Hi,
I have prompt in Bex query and want to pass values to query prompt through xcelsius .
In xcelsius i have selection
e.g 1] Combo selection is for Vendor
2] Combo selection is for Fiscal Year
If i select value from Combo list and refresh the dashboard im getting below error
A database error occured. The database error text is: The MDX query SELECT { [Measures].[4IKKZVYWWD3XKQK7Z1BK34VTL], [Measures].[4IKKZVJJUFWIJHHBND6VJ0YE1], [Measures].[4IKKZV46SIP3I8EFBP26YX0YH], [Measures].[4IKKZUOTQLHOGZBJ00XIET3IX] } ON COLUMNS , NON EMPTY [0CREDITOR].[LEVEL01].MEMBERS ON ROWS FROM [0FIAP_O03/ZFIAP_O03_UNIVERSE] SAP VARIABLES [VN_VAR] INCLUDING A00140 [0S_FYEAR] INCLUDING V3/2010 : V3/2010 failed to execute with the error Unknown error. (WIS 10901)
I have tried using LO and QWAAS but not able to do so......
if any one knows plz help....

Hi,
most likely yo are passing the wrong value.
you need to send the key or the member unique name.
Ingo

RRI? How to call ITS URL and pass field value from Bex Query.

I am doing RRI from query to webaddress,
i have defined jump(report type: webaddress and reicver report as url) from shopping cart bex query(SRM ) to webaddres.
here url is SRM ITS base link for monitoring shoppingcart(http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN).
jump is working from portal(from bex query ivew).
but i want to pass value(shopping cart value) to above url and want to skip first screen.
i have maintained assignment detail by assigning field name against shopping cart infoobject with type url parameter, but its not directly call reciver url with given input field.
i tried the diffrent combination of url and field assignment as like below:
1: web address url:http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
assigned field: GS_HEADER-OBJECT_ID
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN?GS_HEADER-OBJECT_ID='selected number value'
2: web address url:http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc
assigned field: flNUQVRFPTgzMTcuMDAyLjAxLjAx
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc?flNUQVRFPTgzMTcuMDAyLjAxLjAx='selected number value'
I have seen the source code of that url(inital screen and after entring the value to that screen) too.
how to call webadress(SRM ITS base shopping cart URL) with passing the one of field value of that url screen?
Thanks and regards,
Dushyant.

Declare the gv_orderid in modulepool program.
And Declare the parameter as import parameter in smartform.
CALL FUNCTION lv_form
   EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
*   OUTPUT_OPTIONS             =
*   USER_SETTINGS              = 'X'
   i_input                    = gv_orderid
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5

Getting a percentage on cumulative values in Bex Query

We have a Bex Query where we have 4 columns. For the actual and projected attendence, I'm displaying cumulative values and a percentage. I want the percentage to be based on the cumulative values, but it's giving it to me based on the actual values (what's coming in, not what's being displayed). How do I get it to do the calculation on the displayed values?
This is the actual data coming through:
Month/yr____actl att___________ proj att
01/2005_____10________________10
02/2005_____10________________10
03/2005_____10 ________________20
What I'm getting now:
Month/yr_____cumulative actl att_____cumulative proj att_____percentage
01/2005_____10____________________20_________________50%
02/2005_____ 20 ___________________30________________100%
03/2005 _____30 ___________________50_________________50%
What I want is:
Month/yr_____cumulative actl att_____cumulative proj att_____percentage
01/2005_____ 10 _____________________20_______________50%
02/2005______20_____________________30_______________66.67%
03/2005______30_____________________50_______________60%

Julie,
The OLAp processor in BI cannot take cumulated values - that is - once you cumulate your values - the cumulated values cannot be used further in BeX formulae - even if you use them the actual values will be used.
Month/yr____actl att___________ proj att
01/2005_____10________________10
02/2005_____10________________10
03/2005_____10 ________________20
What I'm getting now:
Month/yr_____cumulative actl att_____cumulative proj att_____percentage
01/2005_____10____________________20_________________50%
02/2005_____ 20 ___________________30________________100%
03/2005 _____30 ___________________50_________________50%
What I want is:
Month/yr_____cumulative actl att_____cumulative proj att_____percentage
01/2005_____ 10 _____________________20_______________50%
02/2005______20_____________________30_______________66.67%
03/2005______30_____________________50_______________60%
This would mean you will not get the desired output - the only way to do that is to use local macros / formulae in the workbook.
Arun
Hope it helps...

I_selcrit_values has values even no query is selectd on the screen

Dear Experts,
Importing parameter i_selcrit_values of method IF_POWL_FEEDER~GET_OBJECTS of feeder class CL_HRHAP00_STARTPG_POWL
has values even if no data is passed on selection screen.Because of this data is getting filtered and user is not able to see whole data.
Also this is not happening for all users.
This issue we are facing in performance document in PMS.
Kindly help.
Thanks

We have run this report powl_d01 , and deleted the cache , still facing the same issue. Please suggest
Regards

Working in BEx Analyzer but giving error dump in Web Analyzer

Hello Experts,
I have a BEx Query, that has couple of customer exits for initial filter selection, and some base KFs and conditions as part of definition. When I run this query in RSRT or in Bex it was running fine, and results showing up in 3 to 5 seconds hardly 10 seconds.
but the same query throwing error in Portal / Web Analyzer.
error contains;
Error Summary : error processing the current request
root cause: The initial exception that caused the request to fail was:
java.lang.UnsupportedOperationException
Messages: warning there is a condition on Plant and Material to suppress results.
contest: under this heading many line of HTML code
when I debug the query in RSRT, I found any issue, all the exits, and the query is quite OK.
does anyone has any idea, whats going wrong?
we cannot suspect the portal / Java patches or anything, Because we have other queries running good.
could someone give me some idea..how to go through this portal/web related errors.?
Appreciate your time and help

Thanks for your help.
This issue was caused by "Bad programming in Customer Exit". Exit is trying to give too many Single values as selection to certain batch characteristics plus some are redundant. So code logic modified to fetch distinct values hence problem solved.
it worked in BEx analyzer but not in Web is just because of its limitations. As I said there is no syntax errors in the exit rather bad logic.
Thanks Again

Number of Page View is showing zero for Site web Analytics Reports

Hi,
We have enabled Site Web Analytics reports in our Site Collection but the Number of Page views is showing zero for all the dates. We have checked all the events to capture in Site Collection Audit settings, Reporting feature is also activated but still the
count shows 0 for all the dates.
There are other Site Collection that exists under that Web Application but they show the count for Number of Page views in Site.
Any help would be appreciated.
Regards,
Vijay

hi
1-first check "Usage and Health Data Collection Proxy" is started, if not started:
find usage proxy id with following command:
Get-SPServiceApplicationProxy
then start service with following command:
$UsageApp = Get-SPServiceApplicationProxy | Where {$_.ID -eq "[usage proxy ID]"}
$UsageApp.Provision()
2-check following link:
Popularity Trends populating 0 results
yaşamak bir eylemdir

Variable with proposed value in BEX Query View

Dear SAP-Gurus,
I have a Web Application with some views on one query. In the inital screen i show the popup for entering the global variable values. Now my question; is it possible to give a global variable used filled by exit and used in these queries a proposed value, receeived by user exit?
With normal query this works, but not with a query view.
any suggestions?
kind regards.
Jürgen

Hi,
if anyone has the same problem - you just have to set the parameter variables_clear=x in webtemplate.
same applies to bookmarks, if you want the variables to be filled by your exit.
regards
Jürgen

Values In BEx Query ...

Hi Experts,
This may be a simple question but I'm stumped at the moment. Does anyone know how to get the values to repeatedly display throughout the column? I've built a report on the standard payroll cube. I'd like for the values of 0employee, dates, subgroup, etc to display all the way down for each record. Example:
Employee PayDate Gender Language Wagetype Amount
1234          1/1/04      M         EN            1001         $1000.00
                                                            1002         $100.00
                                                            1003         $30.00
Instead I'd like:
Employee PayDate Gender Language Wagetype Amount
1234          1/1/04      M         EN            1001         $1000.00
1234          1/1/04      M         EN            1002         $100.00
1234          1/1/04      M         EN            1003         $30.00
Any help would be appreciated.
Thanks,
Meezy

Hi Meezy.
Just go to the query properties -> display -> uncheck hide repeated key values.
Hope it helps.
BR
Stefan

My boot disk has four folders totaling 34GB but shows 9GB free of 99GB. Reinstall of 10.9.1 did not help.

Since installing OS 10.9.1, my 100GB solid state ATA boot drive has almost no remaining space. The four folders total less than 34GB, but Finder reports only 9GB free out of 99.17. The folders are taking up three times the space that they should. How xan I free up this space??

Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Xml Rtf has value as Regular Text,but in Excel it is considering as Number

Hi All,
In XML Rtf ,for an Item,the value in Text form Field is set as 'Regular Text',and we are generating the output in excel.
In Excel this item value is considering as number.
For Eg : 0120190 is the actual Item,but in excel it is displaying as 120190,'0' is missing.
Needed the output to print as it is 0120190,Please let us know how to accomplish this.
Thanks
Sreekanth

plz see
Excel Output From BI Publisher or XML Publisher is Trimming Leading Zeros [ID 417811.1]

Keyfigure has value in BEx query, but shows zero/0 in Webi

Similar Messages

Maybe you are looking for