Keyfigures not visible in explorer

Hi ,
I am trying to build an explorer report on top of Bi query . I have created universe for this and I have created the information space using this universe  in explorer where I was able to select the measures and facets & when i click on validate it does not show up any errors .When i try to index also it doesn't show any errors but when I run the report it doesn't show up the keyfigures that I have selected  in measures , it just shows the Count.
Can any body help me what could be the reason for this.
Regards
Sirisha

Hi Sirisha,
I am facing the same issue in my Information Space.
If you have found any solution for this issue please let me know the process.
Any help is appreciated.
Thank You
Veera Jangam

Similar Messages

  • Drives are not visible in explorer

    Hi all
    Recently i bought  G470.
    recently i downloaded windows 8 developer view and try to install ofcourse i cant install it ( system hardware not support)
    after that i had used windows 7 DVD to repair (boot manager problem)
    Presently my problem was after login i cant find the drives in explorer
    and i had gone to disk management i found that missing drive are shown in unpartioned free space.
    i am afraid i have lot of data in that can you somebody help me in this problem
    and my micro SD card slot is also not detecting. do i need any special software for this  ???

    I supose you need to restore the OEM version of win7 ... can you detail the issue about win8 ?
    About sdcard I just figured out how to use sdcard on g470 linux if this help ...
    http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
    Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
    Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
    OS:GNU/Linux/Debian

  • ISCSI NAS Drive visible in Disk Management w correct props; not visible in Explorer

    I have a NAS drive setup as a RAID 6. I have it on a network and until a few days ago, all was fine, i.e. I could access it and the files that reside on it. NOW, I cannot access any of the files on the drive. In Windows Explorer, the drive is identified
    but when I click on Properties, it has no characteristics. In Windows Disk Management, the drive shows and when I click on Properties, the correct characteristics are displayed, including the fact that a portion of the drive is used. However, when I try to
    open the drive, it cannot be opened. I have checked the network settings and everything seems to be correct. Also, Microsoft iSCSI is running. I am running Windows 7.
    I have disconnected and reconnected the drive. Shutdown the NAS drive and rebooted the computer. None of these steps changed anything. Also, I have not loaded or updated any software.
    What should/can I do?? Thanks in advance for any help.

    Hi,
    Thank you for the update and sharing.
    Any more question, please feel free to ask.
    Best regards
    Michael Shao
    TechNet Community Support

  • In Explorer drop dowl list is not visible for Entities, Hierarchies, Collection

    I am using SQL Server 2012 MDS on Windows 8.1 Pro. The drop down list of entities, Hierarchies, and collections is not visible on explorer screen. When I hover over the Entity menu the drop down seems to appear but hiding behind the rest of the screen.
    Same issue with Hierarchy and Collections menu. To get to entities list I have to click on explorer menu and then the drop downs start showing up.

    Hi Bhagunde,
    Does the entities, Hierarchies and collections show correctly by using other browsers? Such as FireFox, Chorme and etc.
    Elvis Long
    TechNet Community Support

  • New folder is not visible inside my project but shows in Windows Explorer.

    I created a new folder under another folder.  The new folder is not visible inside my project but shows in Windows Explorer.  Also, if I try to add another folder of that same name, it denies the action since the folder (although invisible) already exists.  My co-worker can access the same file (on a share drive) and see the new folder just fine.  This error occurs whether I was the one creating the new folder or she is the one creating the new folder.  I am new to RoboHelp and she has used it for years.  I suspect something is not yet set up right on my side.  Ideas? (I thought I posted this yesterday but I can't find it anywhere)

    Hi there
    What version of RoboHelp are you using?
    Did you create the folder from inside RoboHelp or did you create it using Windows Explorer?
    Cheers... Rick

  • SQL Expression Fields button not visible in Field Explorer

    Hi,
    On my Crystal Reports installation I can see the button SQL Expression Fields in Field Explorer but it is not visible on client's installation.
    How do I make it visible? I need to create a new report with SQL query for client.
    Thanks,
    Ajay Audich

    Commands are intended to replace the standard linked tables that must users are accustomed to.
    I suppose Commands would be considered an "advanced" feature, considering that they require the developer to be able to hand write SQL (our at least copy it from another SQL editor).
    If you are comfortable writing reading, writing & editing SQL, Commands will open a the door to a whole new level of control when it comes to creating your data sets.
    The biggest problem w Commands is also it's greatest strength... If you're using a Command, CR will assume that you know what you're doing and will not try to rewrite or optimize your SQL in the background. You write it, CR sends it. That means if you write crappy SQL, CR will send your crappy SQL to the db server...
    It also means that you can use join types that aren't available in CR and use sub-queries in in your SQL... Basically anything you can do in the db's native editor.
    HTH,
    Jason

  • Tab Not Visible in Internet Explorer 10

    Hi,
    We have developed application using oracle apex 4 and oracle 11g xe as database. Application runs perfect in Internet Explorer 8 and 9, Recently we upgraded browser to IE10 problem we are facing is there are more than 10 tabs in the application all the tabs are not visible in the application. Please suggest me how to fix this issue.
    Thanks
    Sudhir

    Sudhir,
    The fix you want is for the 10 tabs to work again in IE. Oh, boy! I hope someone can help with that.
    But stepping back for a moment, 10 is a lot of tabs. Is 10 tabs all there will ever be? What if you need an 11th tab? I'm pointing out that it might be time to consider changing the way navigation is done. Now no one likes to comtemplate all the work and user disrutpion of changing the navigation method. But there's only so much room for displaying tabs.
    But please see {thread:id=2519792} for some ideas.
    Good luck,
    Howard

  • NAS not visible in Windows Explorer!

    I seem to be the most stupid person here but why is my newly installed NAS (Buffalo LS220D) not visible from the Windows Explorer?

    Hi,
    First, please make sure that you have setup the NAS corretly, you can refer to the user manual I found on the
    Buffalo offical website
    http://www.buffalotech.com/products/network-storage/home-and-small-office/linkstation-220
    Meanwhile, please mak sure to turn on network discovery under Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings
    Make sure that"client for microsoft network" is installed under the network connection\properties
    If issue persists, please temporarily turn off firewall and anti-virus porgram since incorrect setting can block the connection.
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Yolanda Zhu
    TechNet Community Support

  • Phone not visible in Windows Explorer - post 10.3 upgrade

    I installed 10.3 on my Q10 no problem, saw the Blend icon and decided to install (having used it on the work Passports) so a couple of things....
    1. Blend now downloaded - but wants to install on an F:drive - which would be the Q10.
    2. When connected via USB (or wifi) the Q10 is not visible in Windows Explorer (it was fine in 10.2)
    3. Can see the drivers begin to install, but then it rolls back and a 'Install failed, cannot find F:drive' appears.
    4. Is Blend intended for use on the Q10.
    Anyone got any ideas I can try?
    Solved!
    Go to Solution.

    Found it, you have to go into Settings > Networks and Connections > Connection Services > USB and slide the USB Mass Storage Mode to the on position. It will then show as an ext. hdd in Windows Explorer.

  • Oracle Explorer not Visible in VS 2005

    Hi,
    Uses: VS 2005 Pro; Oracle 9i Remote Database(Live); Oracle 10g Express Edition(Production); Windows Xp sp3+;
    I have my computer which is installed with Oracle 10g Express Edition and I 'm able to connect to the local Oracle XE as well as to the Remote Server which has Oracle 9i. Further I could work with Oracle.DataAccess.client as with my .NET applications. However some tools as Oracle Explorer is not visible in the View menu of my VS 2005.
    While reading some articles I came to know that this tools comes with Oracle's Developer Tools for Visual Studio.
    My question here is since I have already installed Oracle XE and it has installed Oracle client itself, will there be a conflict while installing Oracle Developer Tools in the same machine?
    If I'm mistaken here, pls tell me how can I be able to create TableAdapters using Oracle.DataAccess.client instead of System.Data.Oracle?
    Thanks & Regards,
    Hifni

    FYI - Oracle Explorer is no longer provided with newer releases. You use Server Explorer instead.
    You can install ODAC version 11 so that you get the latest Visual Studio features. No, there wont be a conflict.
    Just allow it to install it in a new Oracle Home (new directory) and you should be fine.
    Christian

  • Folder created in Windows Explorer not visible in Command Line as SYSTEM user

    Hello everyone,
    We have an odd behavior with an application installation, which I cannot make much sense of.
    We are trying to deploy an application on Windows 8.1 Enterprise x64 which tries to access
    C:\windows\system32\config\systemprofile\Desktop during installation.
    This folder does not exist by default in a Windows 8.1 installation. Hence we am creating this folder using a VBS script manually. The VBS script also launches the application EXE. The setup itself runs under the SYSTEM account (in order to be deployed using
    SCCM).
    When the install script is launched, we can see in the Windows Explorer that the "Desktop" folder is created in the systemprofile directory. However, to the setup running under the system account, this folder is not visible.
    I have verified this by running a command line prompt under the SYSTEM user and navigating to
    C:\windows\system32\config\systemprofile\. Using the "dir" command does not show you a "Desktop" folder under the EXACT same path.
    When we create the Desktop folder from this command prompt, the application installs just fine.
    What are we missing? Any inputs are highly appreciated.

    Hi,
    Might this need to quit the command prompt after the folder creation, then reload it to continue the installation of the software?
    Best regards
    Michael Shao
    TechNet Community Support

  • Internet Explorer on imac M5521 some pages not visible

    Help ... I just bought a used imac M5521 ... it works perfect except when I try to go some pages on the internet they are huge! but other pages are just fine .. i don't know how to fix this and i'm not sure about using IE on a mac anyway ... how can change my browser to safari or firefox? the apple page is not visible on my imac ... any suggestions????

    There is no Safari or Firefox for Mac OS 9.
    This (below) is the best you can do for web browsing under Mac OS 9. It's a special build of Mozilla 1.3.1.
    http://www.wamcom.org/
    Still not up-to-date by any means, but a lot better than IE5.

  • I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

    I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

    The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
    For your SysFader issue, this "may" be the problem:
    1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
    2 Click on the "Advanced" tab. This will load a new page of options.
    3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
    4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

  • F1 documentation is not visible

    Experts,
    Still last week it was internet explorer 6. My F1 documentation of ABAP key words in SE38 used to work properly.
    Now I am using Internet explorer 7 on my laptop. When I press F1, only the keywords on the ABAP keyword documentation are visible. The documentation is not visible on the right. It is blank.
    Pls. tell me how to solve this.
    Thanks in advance for your input.

    [Hope this would be helpfull|https://fortress.wa.gov/dop/hrms/downloads/SAP%20GUI%20710%20New%20Installation%20Instructions.pdf]
    else. Google for it.. or get it from service market place.

  • Html view is not visible

    Hi Guys
    i am calling a webtemplate from vc by using html view
    but the contents of html view is not visible in the application but html view window is opening but blank screen when i am trying this link direct in internet explorer its opening even www.google.com is not working from the application.
    after changing my compiler to flex2 compiler i am getting this problem
    Regards
    Amiya

    Hi Govindu
    Thanks
    actualy i am using some guard condition in my html view if i am removing it then its displaying
    in flex2 compiler and some custom drop down events also working strangely in flex2 which is working properly in flash  its realy strange
    can u please explain what are all fixes we can do in order to solve this issue we have also raised oss message regarding this
    Regards
    Amiya

Maybe you are looking for