Keyframes appear almos ramdomly and change place

Can anyone help me with these problems concerning audio editing?  I’m working with Premiere Pro CS6:
keyframes appear whenever I click on the volume level rubber band either with the pen tool or the selection tool, holding or not the command key. It takes a while to undo them and they keep on “growing” like mushrooms.
keyframes tend to change place and move next to the time indicator when I stop it.

Check to see if the Write Keyframes button is depressed on the Audio Clip Mixer for at least one channel. If so, and if you don't want adjustments to audio effects to be keyframed, then deselecting the Write Keyframe option for all channels will do the trick.
This behavior is entirely by design with "intrinsic effects" that are native to all clips, like volume and pan/balance. Whether the ACM's Write Keyframes setting should also affect audio effects that you apply to a clip, like Multiband Compressor, was a topic of much debate internally. To put it another way, the current behavior is by design, but with dissenting opinions.
If you would prefer to have applied (non-intrinsic) effects operate independently of the Write Keyframes settings, please make your voice heard: https://www.adobe.com/go/wish/https://www.adobe.com/go/wish/
[For the record, I was not involved in the debate and honestly do not have a firm opinion about the ideal behavior.]

Similar Messages

  • Firefox 4 RC2 seems to have a problem correctly displaying. Small to large black boxes appear all over it, and change places when I move my mouse. Sometimes the whole screen goes black. Never had that problem before.

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/794271''
    Here is my computer information.
    Operating System
    MS Windows 7 Home Premium 64-bit SP1
    CPU
    Intel Core i7 720QM @ 1.60GHz 43 °C
    Clarksfield 45nm Technology
    RAM
    4.0GB Dual-Channel DDR3 @ 532MHz (7-7-7-20)
    Motherboard
    Alienware (CPU 1)
    Graphics
    Generic PnP Monitor (1440x900@60Hz)
    ATI Mobility Radeon HD 5870
    Hard Drives
    244GB Seagate ST9250410AS (SATA) 34 °C
    Optical Drives
    HL-DT-ST DVD+-RW GA31N
    Audio
    ATI High Definition Audio Device
    I have never had this problem with the current version of Firefox. I uninstalled the RC2, because I couldn't see what was going on half the time.

    It does work, and fixes other weirdness like issues on facebook. '''However '''you need to restart Firefox for it to take effect as simply reloading a page after changing the setting made no effect.

  • Monitoring and changing place....

    Hi, I want to do an application that will monitor a directory for new files, read the file and then change the file to an other directory.
    I need this so I can make a log file, but I don't know how to monitor a directory to see if there's new files. Can anybody help me?
    Thanks

    hi,
    there is no mechanism in Java to monitor a directory such as event listeners do it with objects. What you can do is the following:
    Create a new thread that continually checks the files in the specified directory (using File.listFiles()) and determines new files. It should run periodically with sleeping intervals (Thread.sleep(int)) so that the operating system isn't blocked so much by the file operations.
    best regards, Michael

  • How I can change ipad mini mobile number I initially requested and to place the wrong number

    how I can change ipad mini mobile number I initially requested and to place the wrong number

    If you're refering to your uphone number thats set up to be used with imessage on your ipad, then that is associated with your apple id and has to be changed there first.
    My Apple ID
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Then on your ipad, sign out of messages. Go to settings/messages/tap on send and receive/tap on apple id/sign out
    Then sign out of messages on phone and then back in.
    Then sign into messages on ipad again, number should appear
    http://support.apple.com/kb/HT5538

  • HT203421 I have recently purchased some apps from the app store and after downloading them, the icon that appears in the dock changes to a different icon. It is now the same icon appearing on all newly downloaded apps.  Does anyone know what is happening

    I have recently purchased some apps from the app store and after downloading them, the icon that appears in the dock changes to a different icon. It is now the same icon appearing on all newly downloaded apps.  Does anyone know what is happening here? Even updating an older game app resulted in the original game icon changing to the new identical icon that all new apps are appearing with.  This new icon is like a page with a ruler, pencil and paintbrush. Any tips on how to stop this or how to revert to the icon as it appears on the app store would be appreciated.

    https://discussions.apple.com/thread/6132949?tstart=0

  • I once created an account and changed meanwhile my Apple ID. Now, when trying to log in to iCloud, I get the message: "You are already logged in". I cannot get access to the account in the way, that, for example, the options appear on the right hand side.

    I once created an account and changed meanwhile my Apple ID. Now, when trying to log in to iCloud, I get the message: "You are already logged in". I cannot get access to the account in the way, that, for example, the options appear on the right hand side.
    What can I do?

    Thank you, pvonk, but:
    To be more precise: I am talking about the logging-in within the System Preferences on my iMac.
    When trying to log in with the old ID, I get no access, i.e. it says "Try again"...-Trying the same with the new one gives me the result I mentioned in my first question...
    Now I found out how to do it: I had to erase all accounts-then I could sign in with my Apple-ID. Thanks again.

  • Problem accessing child object and changing its appearance (color)

    For a program, I need to be able to access a child object (in this case a box) after adding it to a transform group and change its appearance, for example the color of its top face. I have included a small code example to show my problem. The box is the only child I have added to the TransformGroup, but when I call getChild(), it returns a node, and thus I can't then call getShape() to get the top face and change its appearance. What am I doing wrong?
    public BranchGroup createSceneGraph() {
         BranchGroup objRoot = new BranchGroup();
         Transform3D rotate = new Transform3D();
         Transform3D tempRotate = new Transform3D();
    rotate.rotX(Math.PI/4.0d);
         tempRotate.rotY(Math.PI/4.0d);
    rotate.mul(tempRotate);
         TransformGroup objRotate = new TransformGroup(rotate);
         objRoot.addChild(objRotate);
         Appearance ap = new Appearance();
         Appearance app = new Appearance();
         Appearance apr = new Appearance();
         ColoringAttributes colr = new ColoringAttributes();
         ColoringAttributes colg = new ColoringAttributes();
         colr.setColor((float)1, (float)0, (float)0);
         ap.setColoringAttributes(colr);
    colg.setColor((float)0,(float)1, 0);
         apr.setColoringAttributes(colg);
         Box box = new Box((float)0.4, (float)0.4, (float)0.4, app);
         box.getShape(4).setAppearance(ap);
         objRotate.addChild(box);
         objRotate.getChild(0).getShape(4).setAppearance(ap);
    objRoot.compile();
         return objRoot;
    }

    It would help if you gave us the following System information:
    Operating System/version
    Photoshop version number
    Amount of RAM installed
    Hard drive(s) capacity
    Make and model number of video card
    Also try resetting your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
    A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

  • I changed my appleID but iCloud is still using the old one and no place to change it.  How do I get iCloud to update to the new ID?

    I changed my appleID but iCloud is still using the old one and no place to change it.  How do I get iCloud to update to the new ID?

    You have to sign out completely and then sign back in.
    On a Mac, System Preferences>iCloud and click 'Sign out'.
    On an iOS device, Settings>iCloud and click 'Delete account' (this will not delete the account from the server).
    Your synced data will disappear from your devices when you sign out, but reappear when you sign back in (give it time).

  • Why did in the right-click menu the "open in a new tab" and the "open in a new window" -buttons change places? And can you change it back?

    With the Firefox 4 RC, the "open in a new tab" and the "open in a new window" -buttons have changed places. It's quite annoying because I normally do it without even looking at it, but now it always opens in a new window instead of a new tab. Is it possible to change it back? Maybe in your own settings?

    You can use the menu editor extension to rearrange menu items - https://addons.mozilla.org/firefox/addon/menu-editor

  • Hi. My id country was Saudi Arabia and I bought lots of apps from it. Now I moved to USA and changed my id counrty. the problem now is that every app that I buy in the USA store and I had already bought in the Saudi store won't appear on my purchased list

    Hi. My id country was Saudi Arabia and I bought lots of apps from it. Now I moved to USA and changed my id counrty. the problem now is that every app that I buy in the USA store and I had already bought in the Saudi store won't appear on my purchased list

    Tell me exactly how much you have in your store credit and I"ll let you know the best solution.
    Also, I'm not 100% sure, but when you switch back to S.A., Apple MAY track your IP and still give you probs if they figure you're trying to get around this problem without moving out of America. But we won't know for 100% until we try it.
    If your store change is less than the price of a single song, then you can ask the iTS support to just cash-out that balance. They'll probably send you a response to reverify this first though.
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html
    Once you change back to S.A. please let us know if you can still see the purchases in the Cloud or not from your US I.P. address as I'm curious if they've fixed this exploit fully or not.

  • Today I can't switch on my Magic Trackpad. (no greeen light appears). Yesterday I changed batteries and the Magic Pad worked propperly till I ended using my Mac. Today there's no connection possible.

    Today I can't switch on my Magic Trackpad. (no greeen light appears). Yesterday I changed batteries and the Magic Pad worked propperly till I ended using my Mac. Today there's no connection possible.
    Any ideas?
    Thank's for writing back.
    Wolfram

    Make sure you used good batteries, put the + side into the tube first and tap the power button once.  If you don't get a green light then it must be bad.

  • When i switch on my macbook its icon first appears smallers then gets bigger and the place where we enter the password.......that page looks like over zoomed. Please help tell what to do????

    when i switch on my macbook its icon first appears smallers then gets bigger and the place where we enter the password.......that page looks like over zoomed. Please help tell what to do????

      Reset PRAM.   http://support.apple.com/kb/PH18761

  • With Firefox as my default browser for a desktop iMac, a note appears "An attempt to change your home page and default search has been blocked" It won't go away

    With Firefox as my default browser for a desktop iMac, a note appears "An attempt to change your home page and default search has been blocked" It won't go away. It tells me to click on the checkmark to change settings but that doesn't work and the red x in the upper right hand corner doesn't remove the note which is in the upper left corner of my iMac ??? The only thing that removes the note is quitting Firefox but it reappear as soon as I start Firefox back up ???

    If that does not work,
    Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift><br> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there?
    Start your '''Computer''' in safe mode with networking. Then start Firefox. Try '''Safe''' web sites.
    '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''

  • HFM QTD and HYTD have changed place

    QTD and HYTD have changed place - how to fix?

    Hi,
    Could you please be more specific.
    Thanks
    Amith

  • Camera problem: photo bar changed place and automatically rotates horizontal

    Hi everybody,
    I've searched the forum but I didn't find a similiar topic that describes my problem...
    After the update for Xperia 2.3.3 I'm having troubles with my camera.
    I CAN take photo's and video's but as soon as I've made a photo the miniature of it moves into the photo bar that was normally at the BOTTOM of my screen but is now automatically moved to the LEFT of my screen everytime I open the camera app.
    When I tap one of the miniatures to view my photo's, the photo is really small. Before the update I pressed the photo and was able to view it 'full screen' as the real image size.
    It's like the screen turnes automatically to vertical and so are the settings and share options etc. Turning the phone vertical doesn't switch it back either.
    I've tried to change the settings of the photo's from 'standing' to 'portrait' and changing the scenes and even turned off the 'turn the screen automatically' setting but it doesn't help.
    Does anyone experience this bug too and is there a fix? I really like making pictures with my Xperia but this is really frustrating.
    Thanks in advance!
    Greets from the Netherlands,
    Xanne

    Hello gwhisperererz,
    Thanks for looking at my problem. I have tried to reset the settings but it didn't change.
    I have made two photo's of what my camera menu looks like. Maybe this will explain the problem better, or is this just what the camera menu should look like after the new update? Before the update I could view my photo's at the BOTTOM of the screen instead of at the LEFT of the screen. And when I pressed a photo to view it, it would come up standing instead of vertical like in the picture.
    Thanks for your help!
    Xanne

Maybe you are looking for

  • Can't access BIOS through Assist button

    Hi all, I have a VPCF11M1E and I am not able to access its BIOS. Pressing F2 doesnt show me any BIOS options and when I press the Assist button it automatically starts the computer. I really do need help ASAP if possible. Thanks in advance!

  • Outbound delivery document flow is not updated after LT0G

    Hello Gurus, after executing LT0G Returd to stock from delivery, a document flow of outbound delivery is not updated. Still an OvrllPickStatus remains = C Fully picked and OverallWMStatus = C WM trsf ord confirmd. This though the goods result to be r

  • List Item Question

              I'm trying to have my list items as capital letters, I know where to find the command to do so. However, when I change my ordered list from numeric value to alphabetical the letters go off tilt. Any suggestions?

  • Currency rate in purchase order

    Hi, I have a case. In standard system foreign currency rate in PO is calculated based on purchase order date. System takes last actual currency rate to calculation. I need to customize it in this way that system will take to calculation currency rate

  • How to see my Printer?

    I've hooked up a NAS drive, accessible by all three of my Macs, one running Leopard, the other 2 running Tiger. There is a USB port on the external drive into which I've plugged my USB printer. Supposedly, I'm supposed to now be able to see my printe