Keyframes not moving with clips

I have a large number of audio clips with lots of keyframes - the video edit (which was locked) now needs some minor tweaking. But when I go to move my audio clips forward to sync with the now shortened video, the keyframes don't move with the clips. I'm sure I must be missing something very simple but I can't seem to figure this out. how do I lock the keyframes to move with the clips?
Thanks!
FCS 1 - 10.4

Thanks for your reply, unfortunately I don't have those 2 buttons on the end. Is that screen shot from Soundtrack Version 1? I looked at the "customize" buttons and they're not there either.

Similar Messages

  • Why are my fields not moving with my Dynamic stamp ? Only the artwork appears

    Why are my fields not moving with my Dynamic stamp ? Only the artwork appears

    Sounds like you're a candidate for Lightroom...based on the time you don't
    want to spend in Photoshop.
    Photoshop install media is likely created in large batches, perhaps in a
    foreign country, so it's understandable that you get Photoshop 11.0.0 is on
    the media.
    I don't know as I would use ProPhotoRGB as my working space in Photoshop.  I
    was merely suggesting that you look at your color settings to make sure
    things were the same on both machines.
    How do you know your actions are the same?  Did you copy the action
    recording from one computer to the other, or did you merely record the same
    steps on each one?  Have you compared the details of each action step in the
    Actions Palette to make sure they are the same?  The symptoms still sound
    like something different than sRGB being the output color-space, or the fact
    it isn't embedded on one or the other of the computers.
    How are you viewing the JPG when it looks the same or different than the
    RAW?  Are you looking at the side-by-side in Photoshop, or side-by-side in
    Bridge, or are you using a mixture of viewers, one Adobe, and one not?  And
    are you using the Canon Codec on Vista or not?  The Canon Codec would be
    showing the camera-preview in the RAW not the RAW adjustments that Adobe has
    done.
    While the OS shouldn't be causing a difference in how the action is run, a
    difference between OSes may make a difference in the processing to show up.
    The camera profile associated with a RAW file is visible in the
    third-from-right tab in ACR over at the right.  The one with the little
    DSLR-camera icon on the tab.
    Can you attach the two JPGs on a reply, here, or if not, upload a ZIP of the
    two JPGs and the RAW to a file-sharing site like http://www.rapidshare.com/
    and post the download link(s)?

  • Audio Keyframes not following extract clip Premiere CS6

    Greetings,
    I am currently immersed in a wedding project that has taken me quite a while to complete. After watching the assembled master edit  sequence last night, I decided I would like to shorten(extract) a section of the walk in at the beginning. I have tried to use extract function  from the program monitor making sure all of the tracks were targeted and the only problem I am having is that the audio tracks have automation that is not following the extract. I have also tried doing a manual razor cut and removing the unwanted section, then have tried with both the track tool and the move tool. Each time the track volume automation does not follow the cuts. I wonder if I am missing something really obvious here. So to summarize: clips are moving but the tracks( there are several audio tracks with volume automation) are not moving in time to match.
    Thanks

    Hi Jim,
    Thanks for the quick response. You are correct as I have been researching this all morning.I really wish I had discovered this earlier as I have a 2 hour timeline with multiple audio adjustments to several tracks. Some were music replacement from a not so good audio feed, but there is a lot of hand drawn key-framing across a few tracks.
    I gotta say that I am surprised that there is not a feature that allows Premiere to have audio track edits to follow edits or a way to tie them to the clips or copy them to the clips. It looks like I either have to live with it or render out another master copy and cut out the unwanted footage.
    While I'm here and asking, any suggestions for rendering out a master file from 1080p avchd for archival and re-editing purposes. I am always afraid when I use match sequence settings that I am doing another level of compression..
    Your suggestions are very helpful here as always.
    Thanks

  • Photoshop CC transform boundaries are not moving with the object...HELP

    All of a sudden when rotating an object the white boundary boxes are not staying with the object which is causing me tons of problems!!  How do I fix this?

    There are many way to make templated to populate one like you have a background layer with placement layers above you need to add images and clip them to the placement layers.
    I create mine with differently to allow automated population.
    Photo Collage Toolkit
    Photoshop scripting is powerful and I believe this package demonstrates this A video showing a 5 image collage PSD template  being populates with images:
    The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
    Size the photo collage templates for the print size you want - width, height and print DPI resolution.
    Photo collage templates must have a Photoshop background layer. The contents of this layer can be anything.
    Photo collage templates must have alpha channels named "Image 1", "Image 2", ... "Image n".
    Photo collage templates layers above the background layers must provide transparent areas to let the images that will be placed below them show through.
    There are twelve scripts in this package they provide the following functions:
    TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
    CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
    LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
    InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
    ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
    ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
    PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
    BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
    BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
    BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
    PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
    PCTpreferences.jsx - Edit This File to Customize Collage Populating scripts default setting and add your own Layer styles.
    Documentation and Examples

  • Mask is not moving with the set key frames

    Hi Everyone,
    Though I have been using this forum a couple of years now, I never felt the need to ask a question, up until now that is. First of all, I would like to take the opportunity to thank so many of you for giving me the answers hence solving my problem before I had to ask. In particular people like Bill Hunt and Harm come to mind. Thanks!
    Now on to my question. In my project a have a track matte key on top of a video with a mask on top of it. A bit like that "24-Kiefer Sutherland-type" editing. This has worked great for me in other projects. However, in this particular one I have set motion key frames on the mask but it only starts moving way later than the key frames are set. Pushing the keyframes forward as a workaround does not give a nice result. Any idea what could be the problem here? I'm editting a 1920x1080 project and the mask has the same dimensions. The update for Premiere only mentions something about Facebook which I don't care about so I don't think a bug will be removed with that upgrade and I'm affraid updates will slow down my workflow (as was the case with the latest Lightroom update for me....)
    I hope this makes sense to any of you.
    Thanks in advance for your help.
    Kind regards,
    Sebastiën
    ps. If someone wants a screenshot, please explain to me how to do that as I cannot cut & paste here it seems and I don't know how to safe a screenshot to my harddisk (without using Powerpoint....embarrassing....)

    Hi Ann, sorry for the late reply. I got the (hidden) message to update anyway, didn't know there was a "learn more" link which actually stated "general bug fixing" or something so I thought I'd give it a try. Updated PPro, restarted my computer but the problem with the mask remains. Here are some screenshots:
    You can see my mask and in the effect controls panel you can see that the CTI is way past my keyframe but the picture is still way outside the "wanted" image, a bit later it all of a sudden slips quickly in place but of course it doesn't look nice at all (mind the CTI):
    By the way, the image of the guy himself is getting smaller as well at the same time via a simple scale key framing. Here's a close-up of what I'm trying to do:
    Your help is much appreciated (and thanks for teaching me the "wonderful" program of Paint.....I knew it had to exist for some reason!),
    Sebas

  • Screen not moving with play

    This has happened a couple times, but this time the issue isn't resolving itself. The screen is just staying put during play. I can move it with the cursor but it won't do it automatically. Any way to fix this?
    Thanks

    Nevermind, just figured it out. Thanks anyway.
    If you are actually looking for an answer to this question, there is a tiny button at the bottom right-hand corner (stress corner, not just to the left of the corner) of your 'viewscreen.' Click so the arrows are lined up on top of each other and your screen will start moving again.

  • My trackpad mouse is not moving with my touch. The cursor seems to have a mind of it's own. I've updated my software and it's still happening. What do I do?

    The mouse on my trackpad is not responding to my touch. The cursor is very jumpy and sometimes doesn't allow move it at all. It seems as if my cursor has a mind of it's own...what should I do?

    Sometimes this is caused by  a swollen battery.
    Genius reservation http://www.apple.com/retail/geniusbar/
    Portables and Magic Trackpad: Jumpy or erratic trackpad operation
    http://support.apple.com/kb/TS1449

  • Content not moving with artboard

    Kind of a newbie question, but for whatever reason when I try to rearrange artboards most of the content doesn't move with it.
    How do I change the content to be associated with a specific artboard?

    Oh, layers shouldn't matter, unless they are locked perhaps.
    Just ensure the "Move art with artboard" option is clicked when the Artboard Tool is selected.

  • Losing the audio track when moving a clip from the browser to the timeline

    Today we were trying to add two clips from the browser in Final Cut Express HD to the timeline that was created yesterday. The problem is, the clips we were adding today are not moving with the audio tracks. All other clips from when we created the movie are fine but the two we added today have no sound. The audio works when viewing the clip in "viewer" but not once it is moved to the timeline. Any thoughts?

    Hi(Bonjour)!
    Look at the left side of the time line, there is a device (the patch panel) to set the current video and audio target tracks. (little V1 and a1 a2 icons). Swith them to desired tracks to select the target audio tracks (that's where the video and audio-or just one of them-will be inserted in timeline upon editing). There is also a contextual menu (control click) with reset panel command.
    Michel Boissonneault

  • Component on page not moving as vertical scroll bar is moved

    All -
    I have a mxml page that is a mx:Application.  This page basically consists of a VBox
    and a number of components included within that VBox.  All but 1 of the components
    within this VBox are built-in flex components.  The one component that is not a built-in
    flex component is the one that is causing me issues.  The issue is happening when I run
    the application, once running the vertical scroll bar appears on the right-hand side of the
    page (as expected because I have quite a few items in my VBox).  The problem is that as
    I drag the vertical scroll bar from the top of the page to the bottom of the page, the custom
    component within my VBox that I built is staying put (it's not moving with respect of the
    movement of the vertical scroll bar).  All of the built-in flex components that are within my
    VBox are moving with respect of the movemnet of the vertical scroll bar as expected.
    I appreciate any information that you can provide that will lead me in the right direction,
    Thank you,
    Wes

    // THIS IS THE CUSTOM COMPONENT

  • Clip name does not import with video file

    I have a raw AVCHD file shot on a Sony FS-700. I imported all ~180 clips and moved them from the FCP X folder into a folder on my raid drive for use in multiple projects. The clip names at import are Clip #1, Clip #1, etc. etc. I then rename them in my finder window in their new location. The clips look great and playback great through Quick View and Quicktime. However, I run into a problem when I import them from their new location into a new event. The clip which is named 'FCP X Import' will import and be labeled 'Clip #89'.
    I would like to remain naming them in Finder if at all possible. This might be a Yosemite error or just my workflow. Workflow is: I edit directly after the event with imported media from the raw file and use the 'Clip #89' first then move, then rename to 'FCP X Import', then reuse for other features (which is where the problem occurs).
    Note: Clips do bring in Finder tags. For example, if I label it red the clip will retain that tag in FCP X
    Thanks.

    It would be quite helpful to know what format the footage is, what camera it came from.
    First thing to try is this, assuming AVCHD or similar footage type from SD card -
    Copy ENTIRE card contents to hard drive, not just video clips. In Premiere, Import using the "Media Browser". See if that helps
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Clips not moving in timeline

    I noticed this recently with CS5.5 as well but now in CS6 and i can't figure out what is going on.
    I have a timeline with clips.  I created the timeline form scratch and added a few clips.  Nothing earth shattering.  I moved them all around and then left for a while.  When i came back, the clips in the timeline were locked in position.  I can't move them.  The tracks are not locked, the clips are enabled, when i try and drag them, they just flash but do nothing.
    Now in CS5.5 if i waited long enough, then would eventually free back up.  I haven't waited that long in CS6.  Does anyone have any idea what would cause this?
    I have closed Premiere and reopened and that didn't help
    I tried creating a new sequence and can't drag anything into it.  Its as if all dragging was diabled.  I am however able to move them with the keyboard.    I am also able to add to the timeline using the , and . keys.  Just no dragging.
    I can select them and lasso them but can't move them.  it is the strangest thing

    I've never seen this behavior before.
    If I had to guess, I'd say something was wrong with your graphics driver.

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • Not happy with moving around keys on the timeline

    I just changed from Final Cut to Premiere CS5.0 and I really like it. Working on a Macbook Pro i5 2.3GHZ, Mac OSX 10.7 But I am not happy with moving around on the timeline. I was used to using the up and down arrows to move to next video edit point, marker point or audio edit point. I tried everything to change it, highlighted the track etc. It only works together with the FN key, which is a bit uncomfortable. And then it definetely is not going to any audio edit points (very annoying!!!) and marker points (have to use Q and W keys). It makes me doubting if continuing with Premiere or not. Its such an esencial and easy to use tool while editing in a normal fast editing rythm. When I change it in the customize keyboard menu, into a Custom keyboard or FCP keyboard, it would ignore my changes on the arrowkeys, although it recognizes any other changes I do. Is it so complicate to change this issue in Premiere to how it is set in FCP? Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!

    Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!
    You dont have to live with that at all if you are fixed only to what you have previously done.
    It makes me doubting if continuing with Premiere or not.
    There ya go!

  • I moved by iTunes files to an external drive because I was changing computers. I then moved the files to the new computer. My iPod is not linking with the files on the computer.  What can I do?

    I moved my iTunes files from my old computer to an external hard drive.  I then moved those files to the new computer. My computer and iPad are not linking up (recognizing each other?).  I installed the latest version of iTunes onto the new computer to see if that would help.  It did not--I got the message that an iPad can only be linked up with one computer and the new download would not work with this iPod.  So the iTunes' library and my iPod are not connecting, and I have no way of installing or removing new songs onto my iPad.  What should I do to correct this?

    Sorry, I had a typo.  The last sentence should have read "iPod" (iPad):  So the iTunes' library and my iPod are not connecting, and I have no way of installing or removing new songs onto my iPod.  What should I do to correct this?

Maybe you are looking for