Keynote 08 will not finish export to quicktime, or share with any apps

I have a presentation that I am using a smartbuild (160 photos) that will not finish exporting to quicktime, or share with youtube or iweb/idvd, etc. It saved once out of twenty attempts. It freezes up around the last photo in the smartbuild then quits unexpectedly. Any tips?

The other work around that I've found is to tell it "send to iDVD" but then quit iDVD when it pops that up. You'll end up with just the quicktime file it created.
What I noticed is that when a "quicktime export" plays in QT, it has a fps rate of like 7 or 8 or even 13 but the dynamic "playing fps" goes up to 30 during transitions and back to 0 when there isn't a transition. At least with the iDVD cheat you end up with 24 fps. That may work for some people, that is film rate, but I'm in need of NTSC DV 29.97. So I import it into Final Cut Express, and do an export conversion.
I don't use audio, so I don't know how that would work in this cheat, but since your voiceover (I'm guessing based on trying to put music to my slides) is one entire track, you can add that in FCE before that export and line it up there.
If anyone else has suggestions to get a 29.97 export correct with the "export to quicktime", I'd love to hear it. This cheat takes too long for my work.

Similar Messages

  • Upon upgrading to Yosemite, the Pages and Numbers apps will not open (although they are the latest versions) and Keynote will not upgrade; how do I go about getting the apps to open?

    Upon upgrading to Yosemite, the Pages and Numbers apps will not open (although they are the latest versions) and Keynote will not upgrade; how do I go about getting the apps to open? Is this a common issue?

    Hi Madhattanite,
    Welcome to the Support Communities!  When did you purchase your Mac?  The first thing I would suggest is to review the information in the resource below for the Up-To-Date Program for Pages, Numbers, and Keynote.
    Once Yosemite is installed, you should have the option to Accept the Pages, Numbers and Keynote apps in the Mac App Store Purchases pane.
    Apple - Up-to-Date Program for Pages, Numbers, and Keynote
    I hope this helps ...
    - Judy

  • Photo Booth will not open.  My camera works well with other apps.

    Photo Booth will not open.  My camera works well with other apps. 

    try running it in either 32 or 64bit mode and see if this changes the experience. Locate the icon in Finder, right click "get-info" on it and see the checkmarks "run in 32bit mode" ..
    on Lion some users had trouble opeining pb when "iglasses" was installed, also a thing to check.
    Else repair permissions of the disk, using Apples disk utility app.

  • Imove will not finish exporting help...

    Imovie stops when exporting to HD in imovie. I have plenty hard drive space. Just in the last two minutes. Other projects work fine when exporting..

    my issue is a little different. I just got back from a big trip so I had a lot of HD footage. Had to stop importing due to not having enough space. I moved all other movies to an External hard drive but I still only have 2G left of space. It will not allow me to export all the already edited movie footage stating the same thing. Not enough space even on the external hard drive. If I get tetra external drive will this solve my problem or am I doing something wrong?
    I have IMovie 08, Macbook does not burn DVD's have to use external DVD burner and Toast Titanium. I currently can not even upgrade my computer with updates because there is no space. I do not want to lose what I already edited. What is the best solution for me?

  • Keynote does not support exporting with embedded Quicktime Movies

    I hope this helps a few of you out before you run into this problem.
    Keynote does not support export to Quicktime with any slides that contain a quicktime movie.
    Created a 27 page slide show with transitions, music, narrations and 6 Quicktime movies (Actually LiveType Text scrolls)
    When I attempted to export it never finishes the export cutting it short after about 20 pages.
    And the pages with the movies, don't start playing.
    It exports fine as a quicktime movie without the movies inserted though.
    Spoke with Apple Support and they confirmed that quicktime placed files within Keynote playback is only supported from the native Keynote Application.
    I read somewhere on this board that it was an issue with Quicktime version 7.5, not so as I tried the same test on a mac with Quicktime 7.42 and it had the same issue.
    So, beware.
    LJS

    Maybe I didn't understand well what you said but it is possible to export a Keynote file with embedded Quicktime movies to a quicktime movie. Actually, I'm doing it and I works. BUT, the issue I get is that I can't get my embedded videos to loop. Grrr...

  • Quicktime would fail to write/export to server windows share with "Error -43: file not found" errors

    Summary:
    With the combination of Windows 7 and Quicktime 7.x, Quicktime would fail to write/export to server windows share with "Couldn't create output movie storage" and "Error -43: file not found" errors
    Steps to Reproduce:
    Trying to render to Quicktime files using network shared folders as a destination:
    Unable to open file. (-1610153459)
    The funny thing: it only happens when there are at least two shared folders mapped on the workstation, and the destination folder used for the rendered movie is not the first one.
    If we have only two mapped drives, F: and G: for example, and we try to render something to F:, everything works fine and no error is showed. But, when the destination is the G: drive, rendering never works, the error is showed, but a zero-byte file is created in F: (!!). ODD! If we remap F: drive with a different letter, but a letter BEFORE G:, the problem always happens. If we remap drive F: to any letter AFTER G:, making G: the first available network drive, rendering works. Also, simply unmapping F: and leaving G: as the only connected network folder makes render to work.
    We do not have a D: drive in our Windows 7 workstations, they are all C: only.
    It is a 100% reproducible problem. We tried with three different Active Directory networks and workstations. It has all of the features of a software bug.
    Any help would be appreciated.
    Cheers!
    Expected Results:
    Error -43: file not found
    Actual Results:
    The workaround seems to be to use the full path to the servers instead of the mapped mount point (ie //server/z/... instead of Z:/...
    Regression:
    All versions of quicktime 7 in combination with windows 7 client and more than one smb share point mapped in a letter.
    Notes:
    All software that uses quicktime movie exports showed this error.

    Not sure what file your are referencing?  Thanks for your suggestion, however, it's not relavant.
    It renders fine if you render to either the UNC path or the first mapped drive.
    i.e. If you have two mapped drives G: and H:
    they both point to \\fileserver\share1\folder
    If you render to H: it will fail, if you render to G: it works!  Same path, same user, same permissions.
    The only difference is H comes after G, so it fails... BUG.  If it was to do with anything else, underscores, permissions etc, it would fail on both.

  • File exports stuck at 95% will not complete exporting process in Final Cut  X or Compressor.  Is there a fix?

    In Final Cut X and Compressor 4 when outputting files the processing stops at 95%, and will not complete the job.  This happens with all of various export options except export media to a QuickTime file.  Anyone have an idea what could be causing this problem?
    I have the most current iMac running the latest version of Lion.

    I have tried everything, including starting threads here on the Apple Discussion Boards and on Creative Cow, etc. The 95% STALL is a bug.  What I have done is to create a hard drive with LION on it, then, when I want to use Compressor I reboot from that hard drive in Lion and then Compressor works fine.  It is a Mountain Lion issue, that is when it all started for me.
    I thought the new update to Compressor, 4.0.5, would solve this and was really bummed when it didn't. 
    It would be great if someone (APPLE????) could figure this out......!!!!!

  • Will not finish install

    A bit frustrated. Logic x will not finish install. Interface appears to come up and ask for previous  session. After which the ubiquitous spinning wheel. Have read other posts advising to install in safe mode but did not resolve the problem. Wondering if any other suggestions concerning MIDI drivers or the like interfering with and sell? Have been using logic nine many years now. Have never run into such a problem. Thanks for any help.

    Another point...when I try to close the frozen install window "cancel" or the red close button usually doesn't work, thus I have to go into task manager and do it that way. When trying to install the program again, it always says "Quicktime could not install, iTunes needs quick time." Then goes on to give me another error message: "another program is installing, try again later." I then have to go into Task manager (processes) again and end "QuickSet, iTunes Setup (Elevated), and iTunes helper. I am not even sure what these are...

  • I am having trouble installing itunes. I get so far and it will not finish installing Quick time. Error %appdata%/ what does this mean? We had itunes before and it vanished? I have Windows 7 and explorer 9

    I having trouble reinstalling itunes. I have windows 7 and explorer 9. Keep getting as for as itunes installed and it will not finish installing Quick time.also, keep getting error message "could not find location %appdata%/. What does this mean?

    http://www.apple.com/support/itunes/contact/

  • Adobe Acrobat 11 will not finish installing on my iMac running 10.9.4. Any ideas?

    When trying to install Adobe Acrobat 11 Pro on my iMac running 10.9.4, the install will not finish and hangs when installer indicates "running package scripts". Any ideas on how to resolve?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
              /var/log ▹ install.log
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. The contents of the log will appear on the right. Each log message begins with a timestamp. Select the messages from the time of the last installation or update attempt. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again. Select the new messages that appear. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    ☞ If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    ☞ When posting a log extract, be selective. Don't post more than is requested.
    ☞ Please don't indiscriminately dump thousands of lines from the log into this discussion.
    ☞ Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting. You may need to use a text editor with search and replace, such as TextEdit.

  • TS1702 I have an app that appears to need to be updated. I clicked to update three days ago. It has started to update and will not finish. How can I delete the app while its in the middle of updating?

    IPhone 5
    I have an app that appeared to need to be updated. I clicked to update three days ago. It has started to update and will not finish. How can I delete the app while its in the middle of updating?

    Locked on an update can mean a couple of different things. So there are a number of things to try, but start with these.
    If you have a "waiting" icon, try tapping on the icon and see if you can pause the update/download. Of it pauses, tap on it again and see if it will resume.
    Try holding down on the icon until all of the icons on the screen wiggle. If the X to delete pops up on the waiting/stalled app -  tap the X to delete the app. Tao,the home button and the apps will stop wiggling.
    You can also try this and see if the downloads will resume. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • IPad syncing will not finish

    My iPad will not finish syncing.  It has been on step 7 of 7 for hours and still says "Waiting for items to copy".  This has been a consistent problem for about a month... sometimes the final step is syncing music and sometimes photos or movies, regardless it seems like it alwasy stalls out on the final step of the syncing process.  It's possible that It hasn't worked since moving to iOS 5 upgrade.  It appears that everything is correctly moving from laptop to iPad... but I have to eject iPad to make it stop syncing and some of my apps are crashing too.  Any ideas?

    If you are syncing over WiFi - rather than ejecting the iPad - just try quitting iTunes if the sync will not finish. Restart your computer, and restart the iPad and see if that helps.
    I had a similar problem and that is what worked for me.
    The other thing that I have noticed - and maybe this is the wrong way to do this - but with WiFi syncing on my iPad - if I eject the device after the sync - iTunes does not want to recognize the device again when I relaunch iTunes. If I just quit iTunes after I sync, I have no problems with my iPad being recognized in iTunes when I launch it again.

  • Adobe digital editions will not finish downloading ebook  even after double clicking on hard drive .

    ADE will not download and open the ebook automatially. After locating the .ascm (ebook) file on the hard drive and double clicking on that, it still will not open in ADE.

    I did all that and after I close the ADE and double click on the file, ADE opens right up and it looks like it is downloading (very fast), but nothing shows up in the ADE.
    How do I only get emails from you and not all the other people on the discussion?
    Date: Fri, 23 Dec 2011 15:48:24 -0700
    From: [email protected]
    To: [email protected]
    Subject: Adobe digital editions will not finish downloading ebook  even after double clicking on hard drive .
        Re: Adobe digital editions will not finish downloading ebook  even after double clicking on hard drive .
        created by Jeff A Wright in Adobe Digital Editions - View the full discussion
    Right click on the ACSM file or option click and go to Open With and select Other.  You can then navigate to your Adobe Digital Editions and set the file to open with that. I would then recommend closing Digital Editions, if you have it open, and try double clicking the file.  If Adobe Digital Editions opens then the file association is still correct.  If you continue to have difficulties then I would recommend contacting the vendor you obtained the e-book from.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4101791#4101791
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4101791#4101791. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Digital Editions by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Keynote will not open file I created in keynote

    Created the file in 6.5.2 yesterday.  Keynote will not open it from 6.5.2.  will not open from 5.1.1. On advise from this discussion list Zipped it, sent to myself.  Uncompress - will not open.  Sent to different email address - will not open.  Tried everything in this forum.  Went to app store, would not let me purchase because current version is latest.  Think I purchased some version for Iphone and Ipad in desperation - doesn't seem to have been downloaded but was charged for it.  Really really frustrated with the new Apple - where nothing works. Please help.

    Try resetting Keynote;   perform all the steps in the order listed:
    remove Keynote version 6.5, you must use an application removal tool for this procedure to work:
    Appcleaner is free, I use Appzapper
    empty the trash
    shut Down the Mac (Apple menu > Shut Down)
    wait 10 seconds, then press the power button
    Immediately after you hear the startup tone, hold down the Shift key,
    release the Shift key when you see the grey Apple screen
    start up will take a few minutes longer than usual as the Mac is performing a software repair
    restart the Mac normally, (don’t hold down any keys during startup)
    install Keynote from the Mac App Store

  • I have just purchased this os x mountain lion from my app store and it will not finish loading

    i have just purchased this os x mountain lion from my app store and it will not finish loading

    If you mean the DL appears to be stalled give it about half an hour, if there's no movement restart and the DL should pick up from where it left off.

Maybe you are looking for