Keynote 1 and 3 compatability?

If I prepare a Keynote slideshow using iWork 2006 (Keynote 3) on my computer and transfer the slideshow file over to an iBook (which has Keynote 1.1.1 installed on the hard drive), will the slideshow still play? Are there any issues I should be aware of?

Nope, not at all. If you're doing it with Keynote 3, you can only save backwards to Keynote 2 format (iWork '05).

Similar Messages

  • Pages v5 and v4 compatibility

    I just installed Pages 5.5.2 after working in Pages 4.3 for the last three years... no wonder everyone is giving 5.5 such a bad rap (refer to the number of 1-star-I-hate-it votes on the App Store).
    My problem is Pages v4.X and Pages v5.X compatibility - I opened an existing file created in v5.2.X and exported the document so it can be opened in an earlier version of Pages (File > Export to > Pages '09)  it did not work, when I tried to open the exported file in Pages4.3 I get the error "This document couldn't be opened" (great error message Apple, no really, it's packed with lots of information to assist me to overcome my problem!) On the other hand, I created a Pages5.5.2 document and repeated the process (File > Export to > Pages '09), and hey presto I can open the file in Pages4.3. Also, I open a file created in 4.3 in Pages5.5.2 and the formatting goes awry - facing pages defaults to single, alignments skewed, floating elements misaligned. Every page and floating element needs to be checked (some are missing).
    My colleagues and I are struggling to open Pages documents created in one version and exported to be opened in another version (I refer to the error above). I'd like to hear if others are having the same problem and what they have done to rectify the issue. My preference would be to downgrade everyones version of Pages to 4.3. Is this possible? (We have OS versions which vary across the gamut 10.10 down to 10.6)
    Thanks in advance

    Hi stutteringfish,
    Wayne Contello has written a User Tip for working with the old and new versions of iWork.
    Need newer version of Numbers to open file
    That applies to Pages as well as to Numbers
    The trick is to drag icons for both versions to your Dock. Right click or control click on each and Options > Keep in Dock. That puts you in charge of which version you launch.
    Here is a screen shot of both Pages icons on my Dock.
    Pages 4.3 (Pages '09) on the left (ink bottle).
    Pages 5.2.2 on the right (orange header).
    Both versions will run happily together. Just be sure which version is opening your document.
    Instead of double clicking the document, run whichever version of Numbers/Pages/Keynote suits and use File > Open.
    Regards,
    Ian.

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

  • How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

    We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
    I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
    "The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
    I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
    Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
    Thanks!!

    I was able to get it to work using your instructions off of here and your other thread
    Thank you!
    Chris
    http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

  • Is there any way to view a keynote presentation and the presenter notes on the iPad at the same time?

    Is there any way to view a keynote presentation and the presenter notes on the iPad at the same time? My professors at school have keynote presentations and i take notes during class with the presenter notes feature. I was wondering if there was any way i can view both of them on the same screen on my iPad while studying? This way I could see their slides along with the notes i take during class.

    None that I know of. Suggest to Apple.
    Send feedback to Apple.
    http://www.apple.com/feedback/ipad.html
     Cheers, Tom

  • HT4623 I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doen's offer me another update!

    I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doent's offer me another update! How can I update it? Or I can't?

    ayrosa wrote:
    I still have an iPad 1, and need to update to iOS 7 
    Sorry... This is not possible. The iPad 1 can Only go as far as iOS 5.1.1

  • Where did my bullets go in Keynote? And why am I missing files?

    I've been working on a Keynote presentation that will be exported as a PDF eBook. I opened it up today and I get error messages saying that I have missing files and my square "checkmark-less" bullets have disappeared. (See image below)
    I'm using the Black Checkmark Bullets. The checkmark bullets are ok. Its checkmarkless cousin isn't listed in the inspector window when I try to update it manually. I'm also getting a lot of error messages.
    This is the first time I've expereinced this problem. Running 10.7.3 on a MBPro (2.66 i7 w/4GB RAM), Keynote 5.1.1).
    Ideas to correct this issue? Thanks in advance!

    SOLVED -
    Used AppCleaner to unstaill Keynote, Pages and Numbers. Reinstalled iWork from disk and ran updates. Issue resolved itself after this.

  • HT1338 I purchased keynote, numbers, and pages when i bought my macbook air. However, the December update will not update because it says I do not own the software, but I do. What can I do to get the software to load? This is my first Mac so I am still le

    I purchased keynote, numbers, and pages when i bought my macbook air in late september. the december update will not load because it says i do not own the software and returns an error messgae 100. i have read manuals and looked over the web but i cannot figure out how to get this software update to identify that i do own these three pieces of software. they are installed and usable. any ideas would be appreciated before i call apple support.
    This is my first mac so i am still learning...
    thanks

    First, make sure you are logged into the App Store with the same AppleID that you used to purchase the apps.
    If that is not it, look in the App Store under Purchases. Are they there?
    If not, go into your account in App Store and click the link to show hidden purchases.
    If they are still not there, use the support link in the App Store.
    If they do show up, copy all the apps to an external drive, then remove them from your Mac. Go to the App Store, Purchases, and install from there.

  • App Store not responding after upgrade to OS X Mavericks and installing free Keynote, Pages and Numbers app

    My App Store is not responding after upgrading to Mavericks and installing free Keynote, Pages and Numbers Apps.
    Also I tried to reboot and restart and nothing happens still unresponsive.
    Tried to click as many times as I can the App Store and it won't open.
    Please Help.

    Dongski
    I had the same problem and solved it myself.
    Please see discussion  https://discussions.apple.com/message/23556072#23556072
    Hope it helps

  • I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty  box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable?

    I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty  box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable? Any ideas

    Try dragging the image to the desktop, then drag the image to the slide you want it on

  • Why do I have to update Keynote,Numbers,and Pages on a daily basis?

    For the past week I've had to update Keynote, Numbers, and Pages on a daily basis?If I update the apps today, tomorrow I will be asked to update them again.Something is wrong with picture.
    Is anyone else having this issue?

    Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.

  • How do I copy a Keynote slide and paste it into a new project?

    Running MacBook Pro OSX 10.9.5
    Keynote v. 6.2.2
    How do I copy a Keynote slide and paste it into a new project?
    jazzpsy

    open the first Keynote
    in the navigator panel, click on the slide to be copied to select
    command C to copy
    open the second Keynote
    in the navigator panel, click the slide before where you want the slide to paste, command V to paste

  • Is there a way to allow someone to play a keynote briefing and prevent them from copying, rewriting, or printing it?

    Is there a way to allow someone to play a keynote briefing and prevent the user from copying, modifying, or printing it?  The reason I ask this
    is because I have created a lengthy keynote briefing book that has motion in it, and I don't want it copied, modified, or printed.

    To lock a presentation : 1 Open the presentation you want to lock , and hold your pointer over the name of the presentation at the top of the Keynote application window. A triangle appears. 2 Click the triangle and choose Lock. To unlock a presentation for editing: Hold your pointer over the name of the presentation at the top of the application m window until the triangle appears, click the triangle, and then choose Unlock
    Good luck

  • Keynote, Numbers and Pages are displayed as Top Free, but charges fee.

    Hi All,
    In the first page of Appstore Keynote, Numbers and Pages are displayed as Top Free. But when I try to get them from AppStore it charges fee. How can I get them free?
    Thanks in advance.

    Asked and answered at least a dozen times in this forum in the last week. Please always do a search before posting.
    The iWork apps are currently free to some folks who qualify.
    If someone bought a new Mac since ! OCT 2013, iWork is free.
    If someone owned the previous version of iWork and upgraded to OS X Mavericks 10.9, the newest version of iWorks for Mavericks is free.
    Otherwise, these are usually paid apps.

  • Keynote export and issues with iMovie import

    I told my PC workers I could do a movie for my job in 1 day. They said no way. And I could easily have done that BUT my MAC is FUBAR on file import from keynote to imovie...
    I have Keynote 08, imovie 08 and QT 7.6.4 and did a simple slide show in Keynote. I tried to export to mp4, H264, and jpeg into imovie and strangely enough....it occasionally works. Many times I cannot select the files to import because they are grayed out. I have tried many things and again it sometimes lets me import. However, after import I get the clips in the event, and they seem fine. But when I drag them into the project they do not play..they just show a frame or they default to the last clip of video and then skip (in the proper time) to the next video. It is like they are there but the video cannot be resolved. The keynote is just text with build in and out effects and simple transitions.
    If I go to Jpeg 2000 or DV (notDVCPAL) they imported OK but were very jagged and severe loss of font quality.
    I do not expect this in MAC products. I cannot understand why keynote has a menu setup to export to everything but iMovie....
    HELP!

    To be clear, the imported video seems to run in the event area. I drag it into the project and it LOOKS like it is OK. And if I drag the cursor over the play area it all appears OK. However, if I hit "play" by itself, as the movie plays it goes fine until it hits the imported keynote section, and here you see the very first frame..and that frame only or nothing....until the next raw video clip (which plays fine).

Maybe you are looking for