Keynote 3 files revert to Helvetica when Keynote is closed

I have a strange issue regarding Keynote.
When I create a new file, using for example the theme White I get a theme with the default font Gill Sans.
I then make some slides and save the files and close Keynote.
When I reopen the files, the font of all Master related objects has reverted to Helvetica, altough Gill Sans is perfectly nicely installed on my system.
I have deleted the prefs for Keynote, both in the system library and the user library, I have tested other themes than White, including Black, Gradient and
Does anyone of you have a clue what could be going on and how this can be solved?

The last post was helpful.
The Icelandic Extras contains fonts that caused the problem.
The reason for Icelandic versions of the fonts is for Classic support. We have two super special charachters that cause us constant problems, not so much in Mac OS X, but they are a pain in the butt in OS 9 and the legacy Mac OS's.
I found a solution to this, with the help of the Apple Iceland specialist (actually the maker of the tiger extras package) and after investigating Font book, I noticed that I had 3 copies of Helvetica on the system. One on Classic, one in Library and the third and most recent one in System/Library.
Disabling the older versions of Helvetica solved the problem.
Thanks for the help!

Similar Messages

Files Don't Close when Project is Closed

Hi,
When I close an open project in the IDE, not all the files get closed. Some of them remain open in the JSC IDE, even though the project has been closed.
Would appreciate if the JSC team can acknowledge and fix the issue.
Regards
Haroon

Hi HaroonA,
In order to file a bug, I need a reproducible case. Is this consistently happening to you? How many projects are you working with when this happens? What files don't close (JSP/Java/Navigation.xml/etc.,)? If you can give me a scenario where this fails, I'll escalate the issue.
Thanks!
Sandeep
--Creator Team

Keynote files revert back to 3.0.2.

Every time I save my keynote files they revert back to iWork '06 version (3.0.2).
I've already read "Topic : Keynote 3.03 and 4.01" and it does nothing, I've tried on different files, everything.
When I try to associate the file with 4.0.2 it recognizes it. The only way it will keep it is if I manually change every file. And if I change or re-save it, I have to do it again. I don't want to do this with every file, every time.
When I tell it to open all files with 4.0.2 I get this message: "Are you sure you want to change all similar documents to open with the application 'Keynote'? This change will apply to all documents with extention '.key'" When I click contintue - the file reverts back to 3.0.2.
Now every keynote file I have to manually change, after every time I save it.. - Why is it my default? Where did it come from?
Tell me how to fix this, please. PLEASE HELP!!!

Have you tried deleting Keynote version 3 OR renaming version 3 from "Keynote" to "Keynote 3"?

How can I add an audio file to each slide when I export to HTML Keynote 6.2

How can I add an audio file to each slide when I export to HTML Keynote 6.2
I am trying to create an audio slide show instead of a movie

Drag and drop one music files onto each slide then export. (File > Export > HTML)

I am trying to change the font on my emails and I keep following the instructions exactly by going into preferences, fonts and colours and then choosing - then when I go out of that and back to the message it reverts to Helvetica - what step am I missing?

I am trying to change the font on my emails; I follow the instructions exactly going to Preferences, Fonts & Colours, then I set the preference - I then go back to my message and it reverts to Helvetica. What step am I missing?

There is a display bug, but it still works okay -
I prefer Arial to the default Helvetica, so that's what I set -
When I first open a new message window, it displays Helvetica as the font -
However, as soon as I type the first character, it switches to showing Arial as the font -
...and actually enters in Arial.

Some UTF8 files revert to western encoding when reopened.

I'm using Dreamweaver CS3, and when I built an application I forgot to ensure that the encoding was set to UTF8.
I went through all my files and changed the encoding from western european to UTF8. This was fine until I noticed that SOME files revert back to western european encoding when re-opened.
No matter how many times I change the encoding back ( using ctrl+j and choosing the dropdown in page properties ) and save the files, it STILL reverts back to western when opened.
This only seems to happen on certain files, and some are fine. I've tried creating a new file in UTF8 and copying the contents of the old one into it. The problem persists so I'm thinking that the file may contain odd characters that are causing Dreamweaver to 'intelligently' change the encoding.
Any ideas are welcomed. Many thanks.

I use lots of files that don't have headers, such as PHP includes which include snippets of HTML.
CS3 seems to look for special characters in the file and IF there are UTF-8 encoded chracters in the file AND it is saved as such, it'll remember that when reopening it. However, if there are NO UTF-8 characters in there and you save it as UTF-8, then CS3 will revert back to another encoding (western or some such...), regardless of the setting in preferences (for files without explicit headers).
This is a pain because some of my PHP includes may or may not contain Korean characters (multi-language site) and if I do add them, then I need to remember to switch the encoding to UTF-8 manually. It's just annoying that the global preferences, AREN'T!
I'll be upgrading to CS4 this week so I'll let you know if it's an issue there too.

Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?

Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
What can I do now that I installed the flames of **** onto my computer?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Files reverting back to random saves

I'm working in Indesign CC. I've worked on a layout over the last several days and have finished several pages on the same document. then suddenly after creating a low-res pdf in acrobat my documnet reverted back to the blank document that it was on March 11 at 10:58 am. I then went to my Time Machine's hourly backup and the documents in all of those backup folders have reverted to March 11 10:58 am as well. So the work is gone on my local disk as well as my backups. How could all the files revert to a past save both locally and on several backup folders all at the same time. and more importantly can it be recovered?

Are you sure you saved to the same folder?
If they're gone, they're probably gone for good. I make a habit of periodically saving a new version with a new name, usually each time I'm about to make a major change, or when I start a new editing session, so I have both an easy way to abandon a set of changes and a ready backup path in case of disaster.

Why does TextEdit revert to Helvetica 12 even after you set a new default font whenever you drop an image into an RTFD?

Anyone know a workaround for when TextEdit reverts to Helvetica 12 even after you set the new default to say Verdana 14 every time your drop an image into an RTFD? Kind of defeats the purpose! Is there a way around this? THANKS!

Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

HT1941 I have inadvertently changed a file permission setting. When opening Aperture I get the following; Aperture cannot access this library. To use this library make sure it's file permissions are set correctly. I am an old dude new to Mac OS. What up?

I have inadvertently changed a file permission setting. When opening Aperture I get the following; "Aperture cannot access this library. To use this library make sure it's file permissions are set correctly". I am an old dude new to Mac OS. Looked in settings but have no idea how to allow file sharing to myself. I have been using Aperture actively for 6 weeks. I'm the only one using this Mac. What up?

Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8,but not IE9...

My machine is Top of the range (my Company builds them so it had better be :) )
Amd 1100t , 8gb ram , Windows 7 64 bit etc, etc...
The is not a hardware problem , but a software problem with FF...Any help would be appreciated as I hate using IE 8 for anything at all :( but I have to keep it on my machines just to run my remote security cameras at my Computer shop ???
Original question...as question length is limited ...not very bright that limit by the way :(
"My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8 (unfortunately) but not IE9...
As I own a Computer company I am fairly computer literate but cannot find a plugin that allows this to work in Firefox.... but I would have expected it to work in the new Firefox :(
All the best, Brett :)

The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

Why am I getting File not Found alert when I type into my browser?

Why do I keep getting a File not Found alert when I type into my browser?
I have been using firefox for about 4 yrs now with very few problems. The problem I am having is that when ever I go to type in anything into my browser I keep receiving this message:
(Scroll down to see the rest)
File not found
Firefox can't find the file at jar:file:///C:/Program Files (x86)/Mozilla Firefox/omni.jar!/chrome/en-US/locale/browser-region/region.propertieschronic+fatigue+syndrome.
I recently installed Firefox 5.0 and this keeps happening. It happened with the 4.0 version a couple of days ago but mostly it is the 5.0 version that I am having problems with. When ever I want to do a search I have to manually type in google.com. Is there a solution to fix this?

The NuGet is a dll that was built with 4.0.0.0. The easiest thing to fix problem is target you VS project to use Net 4.0. You could get a new version of NuGet, but if you do make sure you rebuild your entire project. The dependencies in
the VS compiler doesn't always recognize updated libraries. So I normally rename the bin folder in the project and then delete the bin folder. VS will create a new bin folder and then rebuild all the source files. If your project contains
multiple projects then remember to delete the bin from all projects.
jdweng

When I download firefox, using recommended setting, or my own, all the sub files/folders like plugins, modules, updater end up on the desktop as well as in the file location. And when I try to put them into the file location, they don't. And when I delete

When I download firefox, using recommended setting, or my own, all the sub files/folders like plugins, modules, updater end up on the desktop as well as in the file location. And when I try to put them into the file location, they don't. And when I delete them, FireFox won't open. I tried deleting FireFox and reinstalling it multiple times, and a message pops up sometimes that says FireFox may not have installed correctly, so I follow the steps, but all the extra icons on my desktop don't go away. This has happened every time I have downloaded FireFox. The browser itself works, but I need to know how to get rid of these icons, but still be able to use FireFox. This is on a new computer, with Windows 7.
== I downloaded FireFox. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6

Managed to solve this myself. Just went to properties > hidden.

I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

The pdf is loading as html code. If you save it, it will download as :
605124.pdf.html
Change the extension to .pdf
And it opens and works perfectly, I just tested it:
Use this link to download it automatically:
http://saladeaula.estacio.br/arquivo.asp?dir=00/1020624/605124.pdf&num_seq=59828 4

I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way. I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

Newer Reader versions are more strict than older versions (and other PDF viewers). If certain minimum requirements are not met, Reader will tell you that the PDF is damaged. This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
You should contact the creator of these PDFs.

Keynote 3 files revert to Helvetica when Keynote is closed

Similar Messages

Maybe you are looking for