Keynote 6.0 Video not playing (export to Quicktime)

I have a presentation with a few embeded videos. No matter what I do, they videos will not play when exporting the presentation to Quicktime. The same presentation in Keynote '09, export to Quicktime works without issue. Has anyone had similar issues?

Here's what I found ... I had to install Quicktime 7 and use iwork 09' (using them in mavericks) ... Using those two and opening projects in those two, works the way it should be.
There's an issue with the NEW Quicktime ... Even if you open and older .mov, it still won't let you control your keynote prsentation.
If you want to control your keynote presentation ( like the way it was), then search Quicktime 7 and use iwork 09'.
Here's what I don't understand ... Being able to convert any keynote presentation to a .mov is a major deal for videos. When they release the new stuff, doesn't anybody actually look at it first? ... Ya' know, to see if it actually works before releasing it? I get that a few things can slip by, but c'mon, major funtions ???
ALSO ........ When exporting the new keynote ( version 6). You can't export to a .mov ... It says quicktime, but it saves to a mv4.
I can see adding value, but stop taking away value !!!!!!!!!

Similar Messages

When using ipad4, why do videos not play on Google? Audio works fine

WWhen using ipad,why do videos not play on Google? Audio still plays. I have reset the Google app and it will be ok for short time but then reverts back to not playing videos.

Hi Vernon70,
Welcome to the Apple Support Communities!
I understand that an application you downloaded from the App Store, Google, is not functioning as you would expect. In this situation, I would recommend following the troubleshooting steps outlined in the attached article.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Best regards,
Joe

Embedded MP4 videos not playing in iOS Safari

Hi everyone,
I'm having a problem with embedded MP4 videos (e.g. YouTube videos) not playing correctly in Safari. When I try to play one, I get one of two problems:
1. On my (first gen) iPad, Safari usually crashes.
2. On my iPhone 4, videos will load but only play audio, not video, though when I tap on the screen the "play" and "pause" symbols appear.
Has anyone else run into this problem? Or know how to fix it?
Thanks,
Mike

Ok, I fixed it. Go to some embedded Flash video, click to run and then right click to get Global Settings for Flash. Go into Storage and make sure you aren't blocking any data from being stored on your computer. At the very least choose the "ask me" setting. (For good measure I also went into Advanced and clicked to Delete All Data associated with Flash. But when I restored Block for data storage the videos stopped working, so that seems to be the answer.) I'd be interested to hear if this works for others.

Why are my videos not playing the right way up

Why are my videos not playing the right way up

I took four video clips while on a trip this week. Two are oriented the right way (playing wide on the device and imported correctly). The other two are Tall and not oriented right. Orientation is 90 degrees to the right. I don't know why this is happening on occasions. Even some pictures I took did the same **** thing. It's weird. And I can't figure it out. The camera is held the way I want the pictures and videos to be recorded and played but something internal is turning these videos and pictures 90 degrees clockwise.

Video portion of Nightwish DVD not playing correctly on Quicktime. It is not a smooth playback. Can I correct this?

Video portion of Nightwish DVD not playing correctly on Quicktime. It is not a smooth playback. A little jerky. Is there an easy slution to the problem?

I worded my question incorrectly. It isn't a DVD I'm having the problem with, it' s a Nightwish concert download form iTunes I am having the video portion of the video that plays not smoothy. Like it is moothing it short little segments, not a steady flow!

Video not play on phone

Mp3 play but video not play my phone
my Email add. [email protected]
Moderator's note: E-mail address was removed. Please don't publish your personal contact information on a public forum.

sharankumar1, which phone model do you use? Nokia phones are a bit picky about the file content, the codec. If you tell me your model, I tell you the available codecs. In the meantime, you have to convert your videos …

When I open Power Point files in Keynote the music does not play. How can I solve this?

When I open Power Point files in Keynote the music does not play. How can I rectify this?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

U310 Touch - Videos not playing after 8.1 Update

Hello,
I have updated from Windows 8 to 8.1 and updated all my drivers on my U310 Touch.
However, I seem to have a problem with web based videos not playing videos on the internet.
This seems to happen on every kind of web browser, including IE, Firefox, Chrome, and even Steam.
If anybody knows how to fix this problem, that'll be great.
Thanks in advance.

Since the upgrade to 8.1.1 my iPhone 6 stopped recognising the fingers I had stored. I've deleted and addrd them again (which went as norma) and it still has problems recognising them. Seems very intermittent now, whereas before this upgrade was very reliable.
I've reverted to a pin code :-(

Yahoo video and other video not playing

Yahoo and other video not playing in firefox 37.0.2
They played automatically 5 days ago....since then video screen is blank...no 'play' button
I have updated Flash several times
Tried to play these videos on IE....don't play there either.
Thanks for your help!

Note that your System Details List shows multiple Flash plugins.
# Shockwave Flash 15.0 r0
#Shockwave Flash 17.0 r0
You can find the installation path of all plugins on the <b>about:plugins</b> page.
*http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\
You can find the latest Flash player versions for Firefox on this page:
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html

You tube videos not playing

You tube videos not playing on safari, my flash player is up to date, i tried to refresh, quit safari, again tried to play, but every time it shows "an error has occurred, please try again later". I did almost everything to make it work but its not working... help needed

Try deleting the cache and cookies for YouTube.

Keynote 08 will not finish export to quicktime, or share with any apps

I have a presentation that I am using a smartbuild (160 photos) that will not finish exporting to quicktime, or share with youtube or iweb/idvd, etc. It saved once out of twenty attempts. It freezes up around the last photo in the smartbuild then quits unexpectedly. Any tips?

The other work around that I've found is to tell it "send to iDVD" but then quit iDVD when it pops that up. You'll end up with just the quicktime file it created.
What I noticed is that when a "quicktime export" plays in QT, it has a fps rate of like 7 or 8 or even 13 but the dynamic "playing fps" goes up to 30 during transitions and back to 0 when there isn't a transition. At least with the iDVD cheat you end up with 24 fps. That may work for some people, that is film rate, but I'm in need of NTSC DV 29.97. So I import it into Final Cut Express, and do an export conversion.
I don't use audio, so I don't know how that would work in this cheat, but since your voiceover (I'm guessing based on trying to put music to my slides) is one entire track, you can add that in FCE before that export and line it up there.
If anyone else has suggestions to get a 29.97 export correct with the "export to quicktime", I'd love to hear it. This cheat takes too long for my work.

DVDSP Help - Video not playing in Viewer during some assets, only audio...

Video not playing in Viewer during some assets, only audio until paused. once you hit the space bar or pause, the video shows up in viewer? same results when burnd to disc.
when dragging cursor through out timeline (track 1) video shows up in viewer fine too.
any advice on what could be wrong?
at first i was thinking this was a memory problem, i added another Gig of ram and the problem still exhists.
thanks!

Hi Crazy Dan:
It's a kind of bug in DVDSP Simulator. If you build your project in your hard drive and test it with DVD Player all video will play fine.
I would like to tell you where exactly the problem is located, but it's just a Simulator problem.
Try building your project.
Hope that helps !
Alberto

I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

. I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

That may be a problem with the VLC plugin. VLC has never worked for me properly on the occasions that I've tried it on Windows and Linux, so I have stop using it. There are usually other plugins or media players available that work better.
What kind of media files are that?
For WMP files you can install the new Windows Media Player plugin you can also try RealPlayer and QuickTime if it is about media that those programs can handle to see if that works better.
* https://support.mozilla.com/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
* http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download

Facebook videos not playing on iPad Air(safari browser)

Why do my Facebook videos not play in iPad Air(safari browser) but same video play nicely on iPhone 4(safari browser). It asks me to download flash player to play on iPad but plays fine on iPhone without giving any prompt to download flash player.

You should not have trouble playing using the FaceBook app.

Video not played using JMF while tramitting stream over RTP

video not played using JMF while tramitting stream over RTP
I am using code to tranmit video using RTP using JMF and i am able to successfully get the video on client side
Code to send the video over rtp
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVTransmit2.java
code to recieve video over rtp
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVReceive.html#source
My problem is i am not able to play video in AVTransmit2.java.
If i create a player using datasouce, eigther i get player already occupied or a black screen.
please help me running the video on Transmit side as well.
NOTE: i am using web cam for video source
Edited by: qasitouch on Dec 23, 2009 5:55 AM

I am not getting any error on consol, rather video is not displayed on media screen but black rectangle.
On Transmitter
     // Try to create a processor to handle the input media locator
     processor = Manager.createProcessor(ds);
createPlayer(Manager.createCloneableDataSource(ds)); // here i am craeting a player to show the video on transmitter end aswell.
Player code:
     private void createPlayer(DataSource ds) {
          try {
               Player player;
               if(processor!=null)
                    System.out.println("processor: " + processor);
                    player = processor;
               }else{
                    System.out.println("null is processor");
               player = Manager.createRealizedPlayer(ds);
               Component video = player.getVisualComponent();
               JFrame mediaFrame = new JFrame("Camera Screen");
               mediaFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
               mediaFrame.add(video);
               mediaFrame.setSize(300, 300);
               mediaFrame.setVisible(true);
               player.realize();
               player.start();
               player.prefetch();
          } catch (NoPlayerException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (CannotRealizeException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (NotRealizedError e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (Exception e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
I am not getting any error and not running on the same side. My problem is showing video on Tranmitter end.
Using above code i can create player and a black screen is showing, i am ubable to find, why video is not played in screen.

Keynote 6.0 Video not playing (export to Quicktime)

Similar Messages

Maybe you are looking for