Keynote 6.01 is installed but won't open. Asks for newer version.

So what's up with that?

You need to install the Quicktime 7.5.5 for Leopard, not the Tiger Version.
Go to this Download Page http://support.apple.com/kb/DL27
Good Luck
Léonie

Similar Messages

  • Keynote installed but won't open.

    Keynote installed but won't open.

    Looks like you installed SpellCatcher at one time. Uninstall. I'm not sure about the lastest SpellCatcher release today. Both older versions of SpellCatcher and Unsanity's Application Enhancher causes Keynote to fail to launch successfully.
    NSSpellChecker
    http://discussions.apple.com/search.jspa?search=Go&q=NSSpellChecker
    http://discussions.apple.com/thread.jspa?messageID=777687&#777687
    Dual 1.8GHz G5   Mac OS X (10.4.5)  

  • Installed but won't open new documents from iOS7

    Says installed but won't let me open any new documents, any thoughts?

    Looks like you installed SpellCatcher at one time. Uninstall. I'm not sure about the lastest SpellCatcher release today. Both older versions of SpellCatcher and Unsanity's Application Enhancher causes Keynote to fail to launch successfully.
    NSSpellChecker
    http://discussions.apple.com/search.jspa?search=Go&q=NSSpellChecker
    http://discussions.apple.com/thread.jspa?messageID=777687&#777687
    Dual 1.8GHz G5   Mac OS X (10.4.5)  

  • I purchased a new mac and i installed CS4 Design Standard, it installed but won't open

    I purchased a new mac and i installed CS4 Design Standard, it installed but won't open

    You're welcome! Glad it worked!
    Benjamin
    P.S. Be sure to mark the solving answer correct (Java update) to mark the issue resolved and help other user's find solutions to similar problems.

  • TS1398 Changed pw in my home network. Now when try to connect, I get message "unable to connect"' but It doesn't ask for new password. So ii'm dead in the water. How do I connect.?

    Changed PW in my home network. Now when I try to log on I get "unable to connect" , but it doesn't ask for he new (or any) password, so I'm dead in the water. Any suggestions?

    Use the Settings app to select your Wi-Fi network.
    Settings > Wi-Fi > Select the Wi-Fi Network that will not work > then select Forget this Network
    After to accept this choice your iPad should see your network again and allow you to enter the new password.

  • Firefox 3.6 just installed but won't open

    SUBJECT: FIREFOX WON'T OPEN. I have used Firefox for years, but upon reinstalling my Vista Home Premium OS, I also had to reinstall all my software. The only problem I had was with Firefox, which appeared to download and install successfully, but refuses to open. I uninstalled and reinstalled it twice from the Internet, but it still won't open from either the desktop icon or the program list under 'Start'. Something seems to be blocking it, but what, and how can I fix this?
    == This happened ==
    Every time Firefox opened
    == June 29, 2010 when my Vista OS was reinstalled ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

    Does it start in [[Safe Mode]]? If it does, close the Safe Mode Firefox and open it normally. If it doesn't open, try creating a new profile at [[Managing Profiles]]

  • PB Apps on BBW Downloading and installing But won't open.

    I've just bought a Playbook and installed the lates OS. When I went to Blackberry World to install some apps, they seem to download and install fine but then sit in limbo and won't open. This has happened to 3 free apps now.
    Solved!
    Go to Solution.

    The apps I installed are the Blackberry Tutorial, The Belgium Zip Code  Lookup and a Soltaire Game.
    The apps are visible on the App World screen as installed. But no icon appears anywhere else. Touching the app in the App World menu only provides a description. There is no loss of functionality with the rest of the Playbook. 

  • LR6 downloaded/installed but won't open.  Help screens didn't help.

    I am logged into my creative cloud account.  I downloaded and installed the new LR upgrade but it won't open using either of the methods in help.  I have tried a restart, no joy.  I still have LR5 installed but I don't want to try removing it unless I can get LR6 to open.  Hope you can help with this.  Respectfully, Duncan

    Me too. Tried to get Adobe to help. After 30 minutes someone answered the telephone. Support person implied he's never heard of such a thing. Posted problem on forum. Someone asked me about my computer specs. Tried the support chat feature. Waited forever. Nobody at Adobe responded to chat request. Eventually got a robot email form Adobe stating the problem is solved and issue officially closed. Before this afternoon I had a working LR. Now, I have one LR that is partially functional and one that doesn't open.

  • My EBAY app has disappeared, but when I go to App Store, it is already installed but won't open

    My EBAY app has dissappeared from my screen. It is already installed, but it won't open (in App Store).  How do I get it back?

    Sounds like the above solution worked for you I'm posting this for other readers:
    One reason this can occur is because of parental settings. eBay has a rating of 12+; if this is not allowed in
    Settings > General > Restrictions > Apps
    ...then the app will not show up.

  • Tried to load application bible. Says its installed but won't open

    Tried to load application bible. Says its installed but it won't open. Can anyone help?

    Well, to what location did you actually download it? Waht operating system? You need to eitehr mount the image or run teh installer *.exe.
    Mylenium

  • Air installed but won't open programs such as Elements Inspirational Browser

    When I try to open a program that needs Air, the license screen pops up, I check agree and then nothing happens, cannot open program

    Thanks for the reply. Well I have made some sort of progress, It was not playing ball so I went into start>control panel>uninstall a program and tried to uninstall it but it said that only installed programs could be installed? So I managed to uninstall it by deleted all the files in the c>programfiles>adobe>elements8 etc. I then put the disk in and the serial number was already in there rather than me enter it? It went through the install process only then to say 'rolling back' and is then removed everything and said that the installation process had been interupted and for me to try again. So then I did a disk clean up and restarted the PC. Once restarted I then put the disk in the CD drive and away we go again. This time like the first time it asked me to enter the serial key into the box and it goes through the installation process. Success it then works BUT after coming out of it and going back into it literally 10 minutes later it says 'our records indicate that this serial key has been used already to set up Elementson two other machines which is the maximum allowed. I have 3 options 1) adobe can check the serial key again as I have deactivated from the other PC and Adobe will validate this 2) I have a different serial key or 3) 30 day trial.
    The person I bought it off said they had deactivated it from thier PC
    Would the earlier problems have caused the software to activate on my PC but then after I deleted it, it still thinks that its activated so its used up 1 licence or would the previous issues have no bearing and the seller has sold me a copy thats had both licences used ?

  • IWeb installed, but won't open to desktop

    I was working on my website, clicked on save, and all disappeared.
    iWeb remains in the Applications folder, but will not open from there
    or from the saved file on the desk top and one on the palm drive.
    I re-installed iWeb (iLife 9), but it still will not open.
    What to do now?
    Thanks.

    Welcome to the Apple Discussions. Try the following:
    1 - close iWeb.
    2 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
    3 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
    4 - launch iWeb and see if there's any improvement.
    OT

  • ITunes shows up as installed but won't open showing message Apple Push Service.dll not found

    iTunes shows "installed" yet will not open up when I click on icon, showing message Apple Push Service.dll not found

    If you definitely have a working QuickTime but iTunes thinks that you7 do not, then this points to a particular type of error.
    Do you have a computer that has been set up for a work network? You may find that iTunes works OK when the computer is connected to the network but doesn't at home when not connected.
    There are other possibilities, but this is a common one.
    If I have guessed right, the problem lies in the %path% environment variable. In order to look at its contents, could you do the following:
    Type:
    cmd
    into your search box and click cmd under Programs.
    The black cmd window will open.
    Next copy&paste the following into the cmd window and press return:
    echo %path% >documents\path.txt
    This will place the contents of the %path% variable in a text file called Path in (My) Documents.
    Could you copy&paste this text file into your next post so I can look at it.
    (Use ctrl V to paste into the editor, right click doesn't work.)

  • Classic is installed but won't open apps

    I've confirmed the Classic OS in System preferences. However, when I try to open an OS9 app, it will appear in the OSX Dock, but will not open. I think I may have to reinstall Classic. Any ideas?

    Hi, orangekay.
    After using Macs for 24 years and hanging around these forums quite regularly for about half that time (since several years before they were called Apple Discussions), I have no clue at all what "See the bless tool's man page" might mean, or how to go about doing so. I suspect that a good many other readers of your post, quite possibly including TokyoMonAmour, will be similarly mystified. Perhaps it would be more helpful just to tell how to re-bless the System Folder.
    If an OS 9 or earlier System Folder does not bear the Mac OS smiley-face logo, it is not "blessed". To re-bless the System Folder, open the folder, drag the System file out of it onto the desktop, close the folder, and drag and drop the System file back onto the closed folder. The Mac OS logo should now appear on it.
    TokyoMonAmour:
    I don't know that re-blessing the SF will be the solution to your problem. If it doesn't help (or if the SF is already blessed), please post back and let us know.

  • Can't re-install CS3, won't even ask for my serial number

    My computer repeatedly showed a message stating it needed to be reinstalled, so finally i tried to do so, only to not be able to install it at all.
    it only installed "shared components" not my software! I doesn't even ask for my serial number. I took my software and computer to best buy, they couldn't install it,told me it was my hard drive. so i managed to free more than 100gb and it still won't install. Please SOMEONE TELL ME HOW TO FIX THIS!
    I'M A FREELANCE ILLUSTRATOR NOW WITH NO SOFTWARE TO WORK WITH AND NOT ENOUGH MONEY TO BUY ALL NEW SOFTWARE!!!
    I NEED HELP FAST!!!

    I've encountered almost the exact same issue. Sadly, this is the state of Adobe technical support these days. I spent countless hours chattting with support staff who are mostly ineffective, and then they condemned me to the forums. I've been using Adobe products since the mid to late 80s (pretty much since they've been in business) and it's a disappointment to see that we're left to own devices to troubleshoot these problems. If you have any insight on how to remedy the installation problem since you originally posted, please let me know.

Maybe you are looking for

  • Error while creating the "Year Transfer"

    the following error occurs which doing the Year transfer in SAP business one. Please suggest the reason and its solution. Error [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot change owner of object 'WTR9' or one of its child objects because th

  • Error while creating asset through AS91

    Hi All, When i am trying to create asset through AS91 for a new company i am getting error AY 252 " Current fiscal year 2007 has to be after transfer daet 31.12.2007. In this company the Asset accounting has been recently customised but when i am try

  • Can't import Quick time  into FCE

    I converted some images from I photo into a QT movie but I'm unable to import into FCE. I'm using a G5 with OS 10.4.8, FCE 3.5.1, QT 7.1.3, and IPhoto 6.0.5. Everytime I attempt to import I get this message.... file error: 1file(s) recognized, 0 acce

  • ORA-19566: exceeded limit of 999 corrupt blocks for file

    Hi All, I am new to Oracle RMAN & RAC Administration. Looking for your support to solve the below issue. We have 2 disk groups - +ETDATA & +ETFLASH in our 3 node RAC environments in which RMAN is configured in node-2 to take backup. We do not have RM

  • TNS Listener wont start

    Hi, I have Oracle 11g installed on Win. Vista Home Premium edition. I have set the "Startup" Type for "OracleOraDb11g_home1TNSListener" service to "Manual" and when I try to start it, I get a pop-up saying: "The OracleOraDb11g_home1TNSListener servic