Keynote 6.5 color palette problem

How do I get this "background pic" removed? I don't even know how it got there!
Quitting the app or computer doesn't work.
The pic itself is from a previous project.

You didn't understand my question!
This is the problem - the picture inside color palette.:
I can't get rid of it!!!

Similar Messages

Color Palette Problem

I'm somewhat new to Fireworks... I've been using it now for a
few months, but here recently I've run into something I just can't
figure out. It seems as though when I'm working with colors, I'm
working with a smaller color palette than what I worked with after
I first installed Fireworks.
If I pick a hexadecimal color value and try to use it in
Fireworks, it winds up picking the closest match to that color. For
instance, if I choose #FFFFE6 (very light yellow) as the starting
color for a gradient and choose #FFFFCC for the ending color,
#FFFFE6 will show up as #FFFFFF... almost white. This same problem
occurs using fills as well. I've also noticed that when using the
color picker, dragging it across a gradient may only show 3 or 4
colors, although I can visually see the differences in colors per
pixel at an enlarged resolution. Before a few weeks ago it would
show seemingly infinite numbers of hex values when doing the same
thing.
This problem didn't start until a few weeks ago... and I'm
pulling my hair out trying to figure out how to fix it. Any help
will be greatly appreciated.
Thanks!

Make sure you don't have 'Snap to WebSafe' enabled in the
flyout of the
color picker (upper right arrow)
alex
fannyarbucklewith135 wrote:
> I'm somewhat new to Fireworks... I've been using it now
for a few months, but
> here recently I've run into something I just can't
figure out. It seems as
> though when I'm working with colors, I'm working with a
smaller color palette
> than what I worked with after I first installed
Fireworks.
>
> If I pick a hexadecimal color value and try to use it in
Fireworks, it winds
> up picking the closest match to that color. For
instance, if I choose #FFFFE6
> (very light yellow) as the starting color for a gradient
and choose #FFFFCC for
> the ending color, #FFFFE6 will show up as #FFFFFF...
almost white. This same
> problem occurs using fills as well. I've also noticed
that when using the
> color picker, dragging it across a gradient may only
show 3 or 4 colors,
> although I can visually see the differences in colors
per pixel at an enlarged
> resolution. Before a few weeks ago it would show
seemingly infinite numbers of
> hex values when doing the same thing.
>
> This problem didn't start until a few weeks ago... and
I'm pulling my hair out
> trying to figure out how to fix it. Any help will be
greatly appreciated.
>
> Thanks!
>

Color Palette Problems on Kuler

So for some reason the color palettes won't download on kuler for me, every time i try and get a color scheme a shockwave flash somehow crashed. How do i fix this problem?

Hi perki13km,
Sorry to hear about your difficulties. What version of Kuler are you using? (there are a couple different ones, for example, the webpage, the Android app, or the panel in a suite product). Based on your reference to shockwave flash, if its the webpage version, I would try either updating or testing in an alternate browser. I know some older versions of Firefox for example don't work well with the webpage version.
Hope that helps
-Dave

Color palette problems using Toolbar and ImageList ActiveX Controls

I'm using Toolbar and ImageList ActiveX controls to implement toolbar functionality in a top-level VI.
I designed the icons used in the toolbar with a 256 color palette. When I initially added the icon images to the ImageList control and ran the VI, the icons were properly displayed in the toolbar, as expected. After saving VI, exiting LabVIEW, and reloading, it appears that a different palette has been applied to the images in the ImageList control. I'm attaching a screenshot of the problem as well.
Has anyone encountered this type of problem before? Any suggestions you provide will be greatly appreciated.
Thanks,
Zach
Software Engineer
OnWafer Technologies, Inc.
www.onwafer.com
Attachments:
icon.zip ‏3 KB

I'm using Toolbar and ImageList ActiveX controls to implement toolbar functionality in a top-level VI.
I designed the icons used in the toolbar with a 256 color palette. When I initially added the icon images to the ImageList control and ran the VI, the icons were properly displayed in the toolbar, as expected. After saving VI, exiting LabVIEW, and reloading, it appears that a different palette has been applied to the images in the ImageList control. I'm attaching a screenshot of the problem as well.
Has anyone encountered this type of problem before? Any suggestions you provide will be greatly appreciated.
Thanks,
Zach
Software Engineer
OnWafer Technologies, Inc.
www.onwafer.com
Attachments:
icon.zip ‏3 KB

Identifying colors in Color palette in Keynote

Hi! I'm new to Keynote and trying to figure out how to identify the color number/values (RGB, CMYK, hex number, ANYTHING!) of a color in the Colors palette. I'm also wondering whether there's a way to type in the color values of the specific color I want vs. just using the slider to approximate it.
Is this possible?
Thanks very much for your help!
Margaret

Thanks so much! I have no idea why I'm not seeing those things, but I'll try to figure out what's wrong with my system.
Much appreciated!
Margaret
Margaret, if you select the colour sliders, the
palette should show you the numeric values that the
sliders have, and let you directly change those
values. Furthermore, you can select what colour
model the sliders use (gray scale, RGB, CMYK, HSB).
If you aren't seeing the values in the sliders
palette, then something is likely wrong with your
system.
(By the way, here's a colour palette tip that many
folks might not know -- you can add any colour on
your screen to your palette by using the small
magnifying glass in the colour palette -- click on it
once, and it will change your cursor into a
magnifying glass; click again, and the colour in its
crosshair becomes the palette's selected colour.
If you like this, but want more control, or hex
values for RGB, the DigitalColor Meter application,
in the Utilities folder in Applications, will allow
you to determine the average colour of a spot of a
specified size.)
PowerMac G5 Mac OS X (10.4.4)

Keynote Bug: Object colors changing when opened on different machines

I'm collaborating on a series of presentations with two other people all using Keynote 3.0.1 and we have discovered that the colors of imported graphics are changing (slightly) when we send files to each other. The same files remain normal on the machine that created them, but once that file is sent to another machine (via ichat, either archived or not), small color shifts appear within imported graphics.
This makes matching an imported graphic to a background color a real pain as you can imagine. The shift is measurable with the color palette and is repeatable and consistent.
Has anyone witnessed this?
-joey wilson
Powermac G5 Quad Mac OS X (10.4.7)

I used to. Are you using CMYK graphics? I think the problem's with the color space. Try using RGB graphics and see if that helps any.

Animated gif changes color palette while playing

Hi everyone,
I've been creating animted gifs using Matlab and the ImageMagick suite (convert). If I open the gifs in Preview, the color comes out fine in each frame; however i I use Quicktime (which is necessary, that's what we use for presentations) the color palette will change as the frames play.
I just got the newest version of Quicktime, hoping that it would solve the problem, but it didn't. Any ideas?

I'm not familiar to the software but I can guess what is happening.
Too many colors. A GIF is 8 bit (256 colors) but some of them are not used by all software. Windows and Mac's are different.
Does the software offer a way to reduce the number of colors used? Can you get it down to 8 bit? Can you discard unused colors with some other software?
Have you considered building an image sequence movie? These allow many different images formats and support up to 32 bit formats (millions of colors).
QuickTime Pro ($30) can import a series of images as a movie. The file size is much smaller than any video format used today (just the total of the images file size).

Reports (10.1.2.0.2) developer crashes when I try to import a color palette

I had enough with this Reports Developer tool. Did not have this problem with 6i version (have been using for years) and do not have problem with changing the color palette with Forms in the 10.1.2.0.2 version. But the :(!@#$%! reports keeps crashing when I try to change (import) a color palette. The only option available is the Export color palette, the Import is always greyed out. This report that I am trying to change the color palette was originally designed with 6i reports tool and I am porting it to iAS format. It is running on Linux. If I start a new report (from scratch) in iDS (reports tool), then I have the paper layouts uses the new canvas of the iDS. But if you try to open up an old report, it shows the old color palette and does not allow importing the proper new color palette. I had no problem with changing the color palette when porting 6i forms to 10gR2 forms. Whe the hell the reports is not working? It supposed to be the same process to import a color palette. I need to port this old reports into new iAS format and this stupid color palette stuff is holding us back.
Any step by step instructions to import a color palette in Reports, is appreciated. Write it for dummies please - I am tired and need step by step instructions please. I never liked the Reports tool (contrary to Forms) and I hate it now.
Message was edited by:
zaferaktan
Message was edited by:
zaferaktan

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Custom Color Palette - Chart Designer

Hi all, I need to change the colors that my pie chart uses. You can do this in chart designer under the global settings section. The property, color pallete has 4 selectable entries, Frog, Streamline, Tradeshow, and Custom. By selecting "Custom", this means that I can choose the exact colors that I want to use, right? If so, where and how do I specify the colors for my custom color palette. Any reply would be appreciated. Thanks.
Regards,
Rich Heilman

Hi Rich,
Did you go through my post here https://www.sdn.sap.com/irj/sdn/profile?userid=397656 ? I`m not 100% sure that you are able to do this using only Chart Designer. The problem is that you need association between series data id in cutomization XML and data XML. If you know such id on design time, you can re-design my example by moving generated piece of XML from WD to static customizing XML.
Best regards, Maksim Rashchynski.

Custom color palette in WAD charts

Hi BI Experts,
we are trying to create a custom color palette, which we want to apply to all your WAD charts.
Can anyone tell us how to do this?
Of course we can customize the colors in each chart, but that's a hell of a lot of work. Moreover, there doesn't seem to be any way to save the custom colors, but we have to recreate the colors with the color picker for every single chart.
The WAD chart wizard allows to choose between color palettes "Enjoy", "Streamline", "Tradeshow" and "User specific".
If it is not possible to create a custom color palette, can we modify one of these SAP color palettes? What does "User specific" mean?
Any help will be much appreciated (and of course rewarded with points).

Moin, bei dem Problem kann ich leider überhaupt nicht helfen. Solltest Du allerdings, wie ich annehme, in Göttingen studiert haben und dann ein paar Jahre in den USA gewesen sein, dann melde Dich doch einfach mal, so Du Lust hast.
Besten Gruß,
Andi

What is the top right button in the color palette used for

I've seen several tutorials on different mac apps and when they refer to the color palette I see a oval shape button in the top right corner. Maybe that was in 10.5 or latter but I'm using Lion and there is no oval button in my color palette. I see this in Pages, Pixelmator and Keynote but no oval button showing.
Thanks in advace

I've found over the past day that its presence comes and goes, presumably based on background apps.
As I'm unable to predict when I'll catch it next time, it's best I close this question and I'll reopen a new question when I can provide a screenshot.
Many thanks for your response, and I'll watch for its reappearance.
John

Keynote - Export with colour palette

I am using Keynote 6.2.
I create a Presentation in Keynote named Preso 1. I create a colour Palette to use within the Preso. I save the document.
A work colleague needs to work on Keynote Document Preso 1.
I save on the server, my colleague opens it up to make changes.
The colour palette that I created within the Preso 1 document has vanished.
How do I save the Colour Palette within the doc so others can open and use it?
Thanks
Marcus

System Color Palettes are located in
~/Library/Colors
However, you're going to have to create a new palette by clicking "New" here:
A new palette "Unnamed" will be created. You can rename that palette by clicking the cog again and choosing "Rename..." Then, you'll need to click on the objects you want to capture the color of, and drag the color of those objects into the color chip area:
Once you've captured the color, you can even rename it something that indicates where it's normally used, providing more information to the recipient than just the color.
Once you've captured all the colors you need, go to ~/Library/Colors and you'll see a .clr file as you named it. Place that file in your server location and direct the recipient to go into their Color Picker, choose "Open..." and select that file. It'll be automatically transferred to the system color picker and that set of colors will be available for any application on your system.
If you ever make any updates to your palette that you want to share, you can send a new .clr file, but if it has the same name as the old one and will be imported as "name 2". So, either rename it before you send (perhaps with a date so everyone knows this is the latest version) or tell them to click the cog to "Remove" the old one before Opening the new one. Probably cleaner doing it the old way so you don't have a lot of palettes lying around.

Appleworks Drawing & Painting: Color palettes *still* getting scrambled

I have a problem when using Appleworks drawing files with painting frames.
An Appleworks painting frame normally has two color palettes. One comes from the Drawing document, and this determines the background color of the painting frame. Anywhere that has no other color has this color. The other comes from the painting frame itself.
When clicking into the painting frame, both of these can get scrambled, with unpredictable results. In some cases, although both the drawing document and the painting frame used the same [presentation] palette, and the background color and another color were supposed to be the same, one could switch to another color. I started resetting the background color of each painting frame to white [in the drawing document], and filling it with whatever color I needed [in the painting frame] which solved one of the problems.
However, I'm still facing the annoying problem that the color palette gets scrambled. When I click into the Painting Frame, the color palette scrambles. If I start painting, it gets screwed up. If I switch the palette from presentation, to something else, back to presentation, that fixes it for the moment. If I click out of the painting frame, and then back into it, or click from one painting frame into another painting frame, the color palette scrambles again. I have to switch the palette twice each time I enter the frame.
Is there any way to correct this problem?

The earliest version of AppleWorks stable in OS X is 6.2.4. That you're using 6.2.2 could be a big part of the problem. Since AppleWorks was designated "end-of-life" it is difficult to find the updaters (especially the US/North American) on Apple's site. Here is the page with the links I have for the 6.2.9 updater. The page has a link to the North American updater in the upper right (the blue 15.8 MB) & links to other languages further down.
AppleWorks 6.2.9 for Mac
Whenever you do an update, it's a good idea to do two maintenance tasks, one for the system (Repair Permissions) and one for AppleWorks (delete preferences). (Thanks to Barry for this way to format this very common answer.)
To Repair permissions, launch Disk Utility, found in the Utilities folder in your Applications folder, click on First Aid, then on Repair Permissions.
To delete AppleWorks’ preference files, go to HD > Users > (your account) > Library > Preferences. Find and delete the file com.apple.appleworks.plist. Find and open the folder AppleWorks in this Preferences folder, then delete all of the enclosed files (with the exception of the Button Bar Preferences if you have customized the Button Bars). AppleWorks will recreate the preference files as it needs them.

CDE 1.2 Style Manager - Color Palette File Location

Trying to find out where the Color (palette, modify, custom) files are located so that I may edit or disable some of the colors that won't work well on certain brands of our flat monitors. Our applications are picking up this information and color styling as well, which is making the problem worse - particular with light text colors like white on light backgrounds like aqua, etc (the users are not intelligent enough to just change the palette to something more readable). Thanks for any help you can lend.

Sorry to cause confusion, I am pretty good at that :)
Log into Shared Services, Expand Foundation, you will see Calculation Manager, select and expand planning, then you should see the apps and under each application all the Calculation Manager artifacts for that planning application.
You will need to export the Calc Manager artifacts as well as Planning application ones, they are separate products, it can be done in one go by using tabs and then clicking export.
If you have a read of http://docs.oracle.com/cd/E17236_01/epm.1112/epm_migrate_planning_app.pdf it should give you a good idea.
Cheers
John
http://john-goodwin.blogspot.com/

Color Palette Extension

My stylesheets tend to get long at times and I find I am
constantly fishing around looking for colors to use. So I asked a
friend at work about it and he created a dremweaver extension that
will pull all of your colors from your css ot html fil and display
them all in one place.
Another cool feature is the ability to import the colors from
the web.
I thought it was a cool extension to share, completely free
just install it and let us know what you think!
[img]http://bnewtz.cannet.com/images/colorPalette.jpg[/img]
[url]http://bnewtz.cannet.com/wp/[/url]

That *is* interesting. Thanks for explaining what you meant by "color migration".
According to this Adobe resource, an earlier version of the Color Palette panel (v.1.2) shipped with CS3—which might explain why it reappears after reinstalling the application. (The one you downloaded from fwkit.com was presumably v.1.25.)
http://www.adobe.com/devnet/fireworks/articles/color_palette_panel.edu.html
A while back, I sought out an earlier version of this panel for use with FW8, but I was disappointed with the functionality and haven't used it much. It's just conjecture on my part, but I don't think the panel would be causing the "color migration" problem, particularly if it's not active in your workspace. I wonder if it's a color management issue. I'm thinking that Fireworks doesn't deal with color profiles, whereas Illustrator does. If an Illustrator file is saved with an ICC profile and then imported into FW, some translation might occur. Try saving the file without an ICC profile before importing to Fireworks, and see if the results are better. Also, have you experimented with sharing color palettes between the two apps? At the very least, this might be a way to fix those "color migration" problems with a minimum of time loss.
Also, don't forget FW's Find panel (accessible through Edit>Find...), which allows you to search and replace colors.

Keynote 6.5 color palette problem

Similar Messages

Maybe you are looking for