Keynote 6 "fonts are missing"

I've installed a clean install of Mavericks and Keynote 6 (I had version 5).
Now I get the error "4 fonts are missing" when I open a old keynote presentation.
But how can I add the fonts when I don't see WHAT fonts are missing?
I can only click OK or cancel and when you click OK and select soms text and look in the TEXT panel the font says blank.
Is this just a big bug of can I see somewhere else what fonts are missing?
Thanks!

I get the same error. I figured out one of the fonts, which I hadn't installed yet on the box. Didn't help. Even though the new font shows up in the font chooser after opening the presentation, Keynote insists it's missing and uses a default choice while opening the font.
I'm not playing games here; this is a teaching presentation I've spent a few hundred hours on over the last 4 years. This bug effectively breaks dozens of slides because they have builds and highlighting that were to line up with the original text. In other words, I can't use Keynote 6 with this bug.

Similar Messages

  • Keynote fonts are missing !!

    This afternoon I downloaded the latest version of iOS5 and iTunes, but now my keynote presentations have lost fonts and all my text is disordered.
    I have not found how to restore this. Help!!

    I get the same error. I figured out one of the fonts, which I hadn't installed yet on the box. Didn't help. Even though the new font shows up in the font chooser after opening the presentation, Keynote insists it's missing and uses a default choice while opening the font.
    I'm not playing games here; this is a teaching presentation I've spent a few hundred hours on over the last 4 years. This bug effectively breaks dozens of slides because they have builds and highlighting that were to line up with the original text. In other words, I can't use Keynote 6 with this bug.

  • Fonts are missing in keynote since I use iOS5? help!

    in all my slides for an important presentation the text is disordered because fonts are missing since I downloaded iOS5.
    Can somebodiy help me?

    Judy McCrorey |
    Account Manager and Support
    Unit 1 14 Rothcote Court Burleigh Heads QLD 4220 | Telephone: +61 07 5507 5200
    PO BOX 450 Mudgeeraba QLD 4213 | Facsimile: +61 07 5522 0163
    Email: [email protected] | Web: www.copyline.com.au
    This message (including attachments) is intended for the addressee named above. If you are not the addressee named, you must not disseminate, copy, communicate or otherwise use or take any action in reliance on this message. If you have received this message in error please notify the sender and delete from any computer. Whilst all care has been taken, Copyline disclaims all liability for loss or damage to person or property arising from this message being infected by computer virus or other contamination. We thank you for your co-operation.
    HI SnakEyz02, a screenshot of my gobbledygookness below in dreamweaver. Your help greatly appreciated!

  • Open, save and then fonts are missing

    I am receiving InDesign 5.5 files from clients. I can open them, make changes, do a save-as and close. When I immediately re-open the file, I get an error that most of the fonts are missing. I am using Linotype Font Explorer X, v 1.2.3 and I understand it is the latest version. Can someone tell me why this is happening?

    Umm. I will have to check. I may be saving just outside of their job folder in the our enclosing job folder. We put client files/folders into a job folder with that job number on it. When doing the "save as", normal procedure is to save just outside the original file folder, leaving original client files untouched and our files separate from theirs. I may have tried saving into the client folder, but will go back and try that.

  • All fonts are missing in indesign

    I closed my file last night with master pages items and text layers locked in the layers pallette.
    The file is to the point that I have master pages set with columns, and guides, and pages, and footer with text.  It is all layed out with images, ready to start typography.  I used Myriad pro, and I think Bell ( this may have been brought in from dafont, not sure).
    When I opened the file this morning it said that the fonts were missing.  I tried to find the missing fonts, but ALL the fonts are missing in the font selection window.
    This was when I realized that the layers were locked.  I dont know if this had anything to do with it, but Ive never used layers before, so assume it is a connection.
    I tried opening a new document and there are no fonts available there either.  It says times, but you cant change it.  It is showing pink backgound like when fonts are missing, and just Os'.
    I opened illustrator to see if the fonts are available there, and they are, no problem.  It is just indesign that is affected. 
    Can anyone help?
    Mary

    Try these solutions
    http://forums.adobe.com/thread/526990
    http://forums.adobe.com/thread/526991

  • A terrible bug , some basic fonts are missing

    Hi:
        There's a huge bug when using acrobat 11 to creating PDF from Word,I find that some fonts are changed,even the system fonts.what's more,When editing the PDF,some system fonts are missing as well！ eg：system fonts:simkai、simfang...
        Hope that someone will help me,thank you！

    Thanks for help me so much，and for this problem:
    firstly ，I'm sure they are system fonts,you may check it in microsoft website or windows documentation.
    （仿宋-simfang 楷体-simkai）
    secondly ,about editting interface, in office when loading fonts I find it's right：
    in acrobat, they are partly missing, you can check and compare the two pictures:
    thirdly , creating PDF from Word，may cause this issue:
    this affect only Simplified Chinese text，and system's language is Simplified Chinese，too.
    I can't find a solution so far.
    Thank you very much！

  • Vista and Embedded Flash Fonts are missing?

    I Just upgraded to Vista with a new development machine. Have
    everything installed and good to go.
    I open a previous Director File that contains swf assets and
    static fonts. The fonts are simply missing. When I view the swf on
    it's own... no problem and text displays perfectly. swf in Director
    in Vista, no go. It worked perfectly in XP.
    The files that are published with XP, the fonts in Flash
    assets are all okay. Publish the exact same file in Vista, Fonts
    are missing.
    Any ideas?

    Fixed it by installing the latest Flash8 Xtra. Wish adobe had
    an installer that could just "update" the software rather than
    manually replacing files... Ah well, all good now.

  • Some text fonts are missing or not displayable???

    Can anyone help!?
    Sorry if this is the wrong forum.
    I opened a logic 7 song today and had this error message pop up 'some text fonts are missing or not displayable'. I then noticed whenever I tried to mute audio (using 'Apple M') logic would crash.
    Any clues what has happened or how I fix this?
    Thank you!
    G

    I have had this exact issue/warning when opening up older songs that I made in previous versions of Logic.
    To solve it, do this procedure even if you never use the Score Editor:
    1. Open the Score Editor
    2. Go to Text>Text Styles (in the toolbar: Layout,Edit,Functions,Attributes, Text, View, Options
    3. When you open Text Styles you will see the grid with different kinds of Fonts for the various Score Editor settings. In this grid, whatever fonts are not available on your computer will have some sort of asterisk bracket stuff instead of saying the name of the font that is already on your computer - Arial, Times, Helvetica etc.
    4. Change the fonts by clicking them and selecting ones that are on your computer. If you dont use the Score Editor, it doesnt matter what fonts you put there. Anything will do but you must get rid of the columns which have got a 'hole' with brackets.
    5. Save the document with the changes made - the problem should not re-occur.
    PS For some reason, when booting up, Logic experiences a 'crisis' when it doesnt have previous fonts available. As I said, do this even if you never use the Score Editor

  • Italic fonts are missing in Table in PDF files when we print it out

    We use Adobe reader10 to open one PDF files, fonts in Table are display correctly on screen, but italic fonts are missing in Table in PDF files when we print it out. Any ideas?
    The PDF display correctly when we use Adobe Reader 9 to open it or print it out.

    George_Guo wrote:
    Why it is OK for Adobe reader9, and not OK for Adobe reader10?
    You could try posting your question on this dedicated Acrobat Print forum: http://acrobatusers.com/forum/printing-prepress

  • Fonts are missing after reloading ID-CS3

    The nightmare continues. After having a major corruption of all Adobe software about a month ago, my IT person finally had to completely wipe my machine clean and reload everything. I am on Windows Vista and using Adobe CS3 Design Standard.
    Now, with everything reloaded, my Adobe InDesign fonts are missing. There is nothing in the InDesign fonts folder. What can I do to get all my InDesign fonts back?

    I found lists for ID CS, and Creative Suites 3 and 4. The list for CS2 appears to have been an attached PDF that is no longer attached.
    http://forums.adobe.com/post!reply.jspa?thread=449073
    http://blogs.adobe.com/typblography/2007/04/cs3_bundled_fon.html
    http://blogs.adobe.com/typblography/2008/09/cs4_fonts.html

  • How to tell what fonts are missing in a Photosohp CS5 document?

    Hello!  I have received some work from a graphic designer.  I need to modify some of the text in the document.  When I open the document I get an error message:
    Some text layers might need to be updated before they can be used for vector based output.  Do you want to update these layers now?  [Update] [No]
    If I click [Update] it replaces the font with Myriad Pro.  If I click [No] the text looks the way the designer intended, but I have the exclamation mark-triangle symbol over the layer with the text.  If I try to edit the text I get another warning:
    Editing or rendering the text layer "Text Layer" will cause its layout to change.  Continue?  [Cancel]  [OK]
    The same behavior described above occurs.  If I click [Cancel] I obviously can't edit the text.  If I click [OK] it changes the font to Myriad Pro.
    I would like to determine what font the layer is using.  I could swear that previous versions of Photoshop would tell me what fonts were missing when I opened a document.  I can't use the text tool to select the text without it changing the font.  Other posts have mentioned using the text tool to look at the text drop-down to find a greyed-out font which indicates the missing font.  I do not have that.  I only have perhaps 200 fonts installed.  Can anyone tell me how to determine what fonts a .PSD document is using?  I would prefer not to bug the graphic designer if possible.  Thanks much!
    ~ Dan

    Not sure why you are getting ""Font is present on the system but requires a layout change.", usually you do not get that instead the name of the font shows.
    We use extensis Universal Type Client, so the fonts load automatically upon opening files, and never really get missing fonts in Photoshop.
    Actually fontbook has auto font loading if you want to give that a try. Fontbook >> Preferences

  • Finding out what fonts are missing

    Hi,
    I have just installed Fireworks and opened a firework file sent from our designers, when I opened it I was told that there are some missing fonts that i do now have installed. So now all text defaults to arial.
    Is there a way that I can find out what these fonts are? Or am I going to have to contact the designers.
    Cheers
    Stephen

    Close the file and open it again. When you are prompted to Maintain Appearance or Replace fonts, cvhoose Replace fonts. FW will open a new dialog box containing a list of the missing fonts, plus those you might want to replace them with. You can exit this box without making any changes.

  • Fonts are missing, please help

    I just got a new laptop and when I installed Photoshop Elements onto it, all my favorite fonts were missing. I had PSE on my old laptop and it had almost twice as many fonts as this one does, but I never downloaded any extras. I don't know how to get them back. Can I download them? Please help!

    I am new to this forum and new to using Photoshop Elements 9 so I have a few questions of my own. I think I do know about fonts and where they are stored/located. Seems like you used the fonts that were installed on your computers under windows>fonts so they were available to all software on your computer. If you did not make a backup of those font's I'm afraid you will have to find them one by one again and install them on your new computer.
    You either buy them or download them from the internet (free fonts) and put them in the appropriate directory. Go to START > computer > C (if that is where windows is installed) > fonts.
    If there's fonts you install for use in Photoshop only, I have yet to learn about that.
    Hope this helps.

  • Embedded fonts are missing characters in display despite having all glyphs...

    Hi,
    As per the subject, I have a vast array of different fonts that I need to load on demand via CSS to SWF.
    For the most part, this works very well. I have around 600 fonts where everything is just fine.
    I also have some problem fonts like the below;
    That is _supposed_ to display;
    "ABCDEFGHIJKLMNOPQRSTUVWXYZ
    abcdefghijklmnopqrstuvwxyz"
    All the glyphs are there, and have been validated using font.hasGlyphs(string) method.
    The font works perfectly in numerous desktop applications
    The font works perfectly when converted to a web font
    Nonetheless, no matter what I try, or what SDK I use, the problem fonts always fail to display on the same characters.
    My guess is, because they are allowing spaces for the characters, that the glyphs and / or metrics are slightly out, but I have absolutely no idea where to begin debugging this and I would welcome any input from anybody who _has_ got an idea!
    Thanks,
    G

    Well, hasGlyphs just says there is data in the slot for that character, not whether the data is any good.
    Essentially,  all embedded fonts are transcoded into a Flash-compatible data format.  Then Flash uses that data format to draw the glyph.  There are 4 data formats that Flash uses, but they fall into two main categories: CFF, and non-CFF.  The transcoding is done via the compiler with help from some font manager libraries listed in the flex-config.xml.  Depending on whether you need CFF or non-CFF, I think different libraries are used.  I've heard you may get slightly different results by messing around with the list of font managers, but I haven't proven it.
    Anyway, first thing I would try is a simple, AS-only test with whatever configuration is failing (CFF or non-CFF).  Then I would try the opposite configuration.  Getting Flex and TLF out of the equation helps narrow down the possibilities.  But it is probably some issue with the transcoding.  Are there other commonalities with the non-working fonts?  Are they all OTF or CFF fonts?
    -Alex

  • Fonts are missing. How do I install them?

    I have Windows 7 and Office 2007.
    I installed the typewriter toolbar a few days ago, and that came with a choice of font, which was great.  Now, the list of fonts is gone.  How can I install the fonts?  I went to Acrobat help and they are talking about embedded fonts.  What does that mean exactly?  Is it simply the fonts that are available to write in Acrobat?

    Hi Twitty,
    hmm, I knew I was missing something fairly obvious. I went into AppStore and the apps were there with an "accept" option rather than a price. I've started the download.
    I've no idea if this means I'll be charged or not. I never got a screen with a price on it so hopefully not.
    thanks for your quick response,
    Sam.

Maybe you are looking for