Keynote 6. Zooming out in Navigator View pointless because grey surround won't shrink?

Keynote Navigator View allows zooming out.
In Keynote 5 this was useful to make more space for Presenter Notes on screen. But zooming out is pointless in Keynote 6 because there is a grey surround which will not shrink. When the slide itself shrinks, more area of screen is given over to grey surround! This is quite simply bad design, unless I am missing some way to solve it. Any suggestions?
Richard Dawkins

Again, thank you, but again I'm afraid it doesn't do it. I had already discovered the little arrow thing you mention. The problem is that although it works fine twhen you pull it DOWN to INCREASE the grey area, when you pull it UP it won't DECREASE the grey area higher than a limited point. Try it after setting the zoom to, say 50%.The picture shows the highest point the little arrow thing is allowed to go. All that grey area below the picture is wasted.
Richard

Similar Messages

SharePoint 2010 Performance Zoom In Zoom Out Button Gantt View

Hello guys,
I'v got a question. I've implemented a Zoom In / Zoom Out Button with JavaScript above the Gantt View, but the performace is not that good. When I presse the Buttons in the ribbbon menu it reacts very fast, but the other Buttons react in contrast very slow.
Should I use another method of implementing?
Best regards
Matthias

Hi,
According to your post, my understanding is that you want to customize Zoom In/Zoom Out for the Gantt View.
Please check that whether there are setTimeout methods in your code.
Here are some JavaScript functions that you can use for Zoom In /Zoom Out feature.
function ZoomIn()
WebPartWPQ1_JSGridController.ZoomInGantt();
function ZoomOut()
WebPartWPQ1_JSGridController.ZoomOutGantt();
“WebPartWPQ1” is the ID of the Gantt View Web Part, you can find it by using F12 IE developer.
More information:
http://www.tekritisoftware.com/custom-sharepoint-2010-gantt-view-zoom-out-zoom-in
Best Regards
Dennis Guo
TechNet Community Support

N8 Anna update zoom out not working in mails

prior to the Anna update, i could zoom out the view for all the mails received in N8 (ive set up gmail account). I use this particularly to view in full page mode for big images in html mails.
But after the Anna update, i cannot zoom out the default view, i can just zoom in.
In short, for the big images in the mail body, i cannot see the full image at once, ive to scroll up down, left right to see the whole thing.
Can this be fixed (other than using Opera) ???

Well well I just went through my settings ones again, and Opera just doesn't work as primary browser.
- But I just tried Belle, and boys just wait, its a huge step forward, and its not taking us on the same level as the competitors, its beyond that.
Sometimes the grass just always seems greener on the other side of the fence, but believe me there are a lot of interesting options on the way.
I have had my N8 for 1 year, and after some huge search not found another device doing the same thing. But I´m involved in outdoor activities and some remote/hostile operating environment. Ok yes there is one phone that has better antenna/receiver coverage and that's N9. This is just my experience.

How to zoom out and view an entire track in the window

There's got to be a way to zoom out so an entire track can viewed at once so that segments of the track can be shifted around. I have a track that is about 50 minutes long with several segments in it. I want to shift the segments around. Right now I can only view about a minute of the track at a time and have to click on the segment then move the cursor either left or right and wait for Garageband to scroll to the time where I want to put it. Isn't there a way to just zoom out and view the entire track and then shift segments around without all the scrolling? Does that make sense?

Christoph Drösser wrote:
Hm ... mine zooms out to more than an hour?
interesting!
I opened GB4 and it maxed out at 4 minutes. then i opened GB6 and it maxed out at 15 minutes. then i opened another project in GB 6 and it maxed out at 35 minutes.
so there must be something else going on here, perhaps like how time sigs affected length in the older versions?

I was viewing a page online, and somehow it zoomed out so the page is tiny in the browser window. How do I zoom back in?

I was viewing a page online, and somehow it zoomed out so that the page is now tiny in the browser window. I've shut down all my windows and rebooted my computer, but every time I return to that page, it is still tiny. I've looked for a button to control the zoom, but cannot find anything. How do I zoom back out so the page is the correct size again?

See this: <br />
https://support.mozilla.com/en-US/kb/Page+Zoom

How to open,view pdf document in a form with zoom in and zoom out functionality Please urgent

Hi
Anybody can help me with a sample code in c# to open a pdf document using forms and to give the functionality zoom in and zoom out with verticall and horizontal scroll bar. Please help
Regards
Pol
polachan

Hello polachan,
you can find two sample projects with code at
[1] and
[2].
[1]
http://www.codeproject.com/Articles/579878/MoonPdfPanel-A-WPF-based-PDF-viewer-control
[2]
http://www.gnostice.com/nl_article.asp?id=159&t=How_To_Create_A_PDF_Viewer_in_PDFOne_NET_v2_x
Regards,
Bo Liu
Developer-Hotline for MSDN Online Germany
Disclaimer:
Please take into consideration, that further inquiries cannot or will be answered with delay.
For further information please contact us per telephone through the MSDN-Entwickler-Hotline:
http://www.msdn-online.de/Hotline
For this post by the MSDN-Entwickler-Hotline the following terms and conditions
apply: Trademarks,
Privacy
as well as the separate
terms of use for the MSDN-Entwickler-Hotline .

In webmail, my view keeps randomly changing to Zoom in or Zoom out...i have to go to View and recheck "Actual Size" but it still keeps doing it. Any ideas??

i will using webmail, and suddenly my screen will either zoom in or zoom out. i have to go into view and change it back to actual size. does anyone know what could be going on? thanks.

i will using webmail, and suddenly my screen will either zoom in or zoom out. i have to go into view and change it back to actual size. does anyone know what could be going on? thanks.

Is there a way to zoom out the viewing window of mac applications?

Is there a way to zoom out the viewing window of mac applications? I know for sure in safari I can zoom out, but it reverts to the original size as soon as I close out the window. I would really like to do this in safari and mail.
Thank you.

Try system Preferences/Accessibility/Zoom.

How do I scroll when zoomed out in Keynote?

I am trying to create an animated presentation in Keynote. I would like an image to appear from off-screen and move across the screen then off the other side. However, when I zoom out in Keynote the slide stays in the top left corner and I can't see any scroll bars, no matter how far I zoom out. So I can't re-position the slide so that it's in the centre of the screen with blank space around it - blank space that I will need to put my image in so that I can animate it.
I'd be really grateful for help as I've tried searching for the answer and I'm stumped.

Put the image in the centre of the slide and zoom to 25%. Select the image and go to the Build Inspector panel. Choose Action then Move. There will be red diamond shapes indicating where the movement will start and end. Drag one off the right hand side and the other off the left hand side. While you won't be able to see where the one at the left ends up, you can tell when it is far enough off.
Be aware that once the point is off screen on the left you can't change it (at least I can't see how to do it) so try to get it in the right position first time. If you need to try again you will have to delete the action and start again.
Hope that helps!

In Pages, on my iPad, how do I zoom out beyond the default view?

In MS Word, you can choose a full page view which displays the entire document as a full page (it's zoomed out to where you can see the entire document plus a couple of inches around the document). Is this possible in Pages on the iPad? If so... how is it done?
Thank You!

Unfortunately, it seems I am not going to be able to do what I want to do (as you mentioned, Demo) - like in Word, it's the "one page" view which allows you to, "zoom the document so that an entire page fits in the window" (see pictured).
I guess I'll just have to adjust
Thank you both!
Amber

Continuous forest line speeds and zooms out or view NOT, but should?

Here is my simple problem which I can not resolve.
I will try to make as a detailed description as possible as I can not figure out which step needs to be corrected.
I would like to create a landscape view as seen by someone on a sleigh ride down the hill.
It starts with a winter forest extreme close up then trees start to move to the left ever so slightly, then speed up down hill and then decelerate and zoom out into a thin line on the horizon while slowing down but still moving to the left of the screen.
The way I decided to create this scene:
I created a nice multi layered file in Illustrator with all the trees overlapping each other. The file is to the maximum artboard width allowed by Illustrator.
I imported this multi layered Illustrator file into After Effects as a Comp with separate layers.
I assigned slight movement in the layers from right to left at various speeds. It gives a dimension to the view as you see one line of trees passing behind another at slightly different speed. This step does not seem to create any problems.
I kept on building the continuous line of trees extending to the right by duplicating imported Illustrator layers until I reached the limit of After Effects Comp canvas size. I believe it was at either 30000 or 60000 pxls. The reason why I need trees so large is because at the beginning of the animation we see them at an extreme close up with all the leaves and branches visible. Then the forest line starts to move to the left and speeds up.
Eventually it speeds up and zooms out at the same time enough to reach its end on the right. By this time the trees are at 50% of the screen size. So I import my tree layers again and match them perfectly at the seam and assign speed and scale so it continues to move past the viewer to the left and zooms out into perspective.
And now everything goes wrong. I perfectly match the points of original tree line and the additional tree line. I see they nicely touch each other in the beginning of the movement and at the end.
However unexpectedly in the middle they start to overlap each other and move slightly faster. For example: Left end of second forest line touches the right end of first forest line at the beginning at 10 sec and touches it the same at the end at 20 sec. However at 15 sec it speeds up and jumps ahead the right end of the first forest line. I tried to fix it by making a key frame at 15 sec and aligning them again. It resulted it two smaller jumps at 12.5sec and 17.5sec. If I keep on keying between the frames the left end of the second forest line continues to make little jumps in between. If I try to adjust the zoom out part it again messes everything up. I did set up my anchor point to the left side of layer.
I thought the problem is with Scale, so I made layer 3D and started to reduce a Z dimension but got the same result. The layers jump on each other and it does not seem as one continuous movement.
POTENTIAL PROBLEM: I did assign Easy Ease, Ease In an Ease Out, so my acceleration and deceleration have nice and smooth motion. However I tried to match the speed and velocity in Key Frame options window (double click Alt on PC opens this dialog window) between the original and the additional forest lines.
I can not make this forest line long enough in a static window as I reached the width limitation of After Efffects canvas size. I need it very large as it starts at extreme close up and then zooms out to a and extreme horizon.
I can not make it a moving line and keep on patching it up as movement does not match and lines start to speed up between the key frames and overlap each other.
I though the problem was the combination of side ways right to left movement and zooming out motion (which I tried both ways: Scale in 2D layer and Z Dimension in 3D Layer) but I can not match even the linear speed of the forest lines from right to left. Perhaps there is a problem with how I am trying to match it.
I will even rebuild the entire project if someone can list steps how to make one continuous line of patched up elements in sync, so they seem as one continuous image line.

Hard to really grasp the situation without a few screen grabs, but some general thoughts:
If all your elements are vector art from Illustrator, scale shouldn't be a factor. Set your Illustrator layers to Continuously Rasterize, and you can move as close as you like to the layers with the camera and they will still be sharp. Thus, you can work at an overall smaller scale, and not go beyond AE's 30000 pixel limitation. Which also means you won't need to frame-match two environments.
It sounds to me like you are overcomplicating the job. Personally, I wouldn't combine camera movements and zooms - the potential that varied focal lengths will upset something is too great. I'd just do everything with camera movement, using the X axis for left-right movement, and the Z axis to move closer or further toward your subjects. After Effects cameras mimic the way real world cameras work, so it's best to approach the job like a real world situation. Build the world, then animate the camera moving within that world.
Remember that you can use Precomposed/Nested compositions to greatly streamline your work. Make a clump of 10 or so trees in one comp, then use that pre comp nested multiple times within your main comp. Don't forget to collapse transformations of the pre comps.

I have CS5 running on Windows but if I call an image into Photoshop it only displays on one view setting. Zoom in or out and I get a chequered grey background. Any suggestions how to rectify please?

I have CS5 running on Windows but if I call an image into Photoshop it only displays on one view setting. Zoom in or out and I get a chequered grey background. Any suggestions how to rectify please?

<moved from Downloading, Installing, Setting Up to Photoshop General Discussion>

Mapviewer view zoomed out within BI report

Hello,
I'm trying to troubleshoot an issue with a mapviewer map within a BI report showing the map zoomed way out. This map is a FL state map with the cities within the states marked. The geometry theme "FL_CITIES" preview fine on the MapBuilder.jar client application.
However, when rendering the map in OBI report, Mapview just shows a grey screen. When I click on the map, then a small map of FL displays, but it is zoomed out.
I tried to update the mapZoom to a different number on
mapview.setZoomLevel(mapZoom);
but there is no change in rendering of the map.
Has anyone else encountered this behavior? I'm on 10.1.3.3. I've cut and pasted the showMap() function:
function showMap()
baseURL = "http://"+document.location.host+"/mapviewer";
var mpoint = MVSdoGeometry.createPoint(-82.6, 28.2,8307);
mapview = new MVMapView(document.getElementById("map"), baseURL);
var mapZoom = 0;
mapview.addBaseMapLayer(new MVBaseMap("MVDEMO.DEMO_MAP"));
mapview.setZoomLevel(mapZoom);
mapview.addCopyRightNote(
"<font color=black>"+
"Oracle MapViewer"+
"</font>"+
"&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp");
mapview.addMapTileLayer(new MVBaseMap("elocation_mercator.world_map","http://elocation.oracle.com/mapviewer/mcserver" ));
var mapZoom=5;
mapview.addCopyRightNote("Oracle eLocation - ©2008 Oracle Corp. ©2008NAVTEQ™");
mapview.addNavigationPanel("WEST",false,false,null);
mapview.setCenter(mpoint);
mapview.setZoomLevel(mapZoom);
flFOI = new MVThemeBasedFOI('flFOI','mvdemo.fl');
mapview.addThemeBasedFOI(flFOI);
countiesFOI = new MVThemeBasedFOI('countiesFOI','mvdemo.fl_counties');
mapview.addThemeBasedFOI(countiesFOI);
regionsFOI = new MVThemeBasedFOI('regionsFOI','mvdemo.fl_cities');
regionsFOI.setRenderingStyle("V.UI_DATA_CITIES");
//setupNsdp(regionsFOI);
regionsFOI.setBoundingTheme(true);
// regionsFOI.enableLabels(true);
mapview.addThemeBasedFOI(regionsFOI);
mapview.display();

Thank u so much for ur reply,
According to the link provided, I hav created session variable, but I getting the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 23006] The session variable, NQ_SESSION.U_USER, has no value definition. (HY000)
how to set the value to the variable?

Web pages too big to view without zooming out each one.

I have to zoom out each new web page manually to see it all on the screen.

I lose the percentage +/- buttons at the bottom right that make it easier to zoom out. The oversized pages do not change. Thanks.

Viewer Window Doesn't Zoom Out

I want to crop down an iPhone footage, because it was shot vertical. Using the crop tool I've reframed shot, but once I hit the done button. It zooms in close to the shot. It's baffling why it would do that. I was unable to find a zoom out key...

"Double Tap Three fingers and Drag to Change Zoom"
Do this in conjunction to zoom back out.

Keynote 6. Zooming out in Navigator View pointless because grey surround won't shrink?

Similar Messages

Maybe you are looking for