Keynote and Audio Idiosynchysies on iPad when using AirPlay

I have the latest version of Apple TV, iPad, and Keynote. We use it to project video via AirPlay on an Apple TV to projectors, and audio from the optical system of the apple TV to an external sound system.
My problem is that when I play video files through the included Photo app on the iPad, the volume is at one level. Perfectly set.
When I embed that same video in a Keynote presentation, it becomes super quiet (over half the volume). The QuickTime inscpector in keynote has it at volume level 10 (max), and I just can't figure out what is going on. Why the different levels?
The iPad volume level is not changed. The change occurs between the two ways of playing the video file.
Any ideas on what is going on and how I can fix this issue? I don't want to make two versions of the movie- one with normal sound, and one with super amplified sound just for keynote presentations.
Help.
Thanks in advance.
Z

You have posted in the wrong forum, this is the Keynote for Mac discussion, post your question in the iWork for iOS discussion.

Similar Messages

The problem is with the new operating system and sending photo via email when used in my iPad. From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Can I view, edit and save microsoft documents such as Word, Excel and Powerpoint using iWork applications such as Pages, Keynote and Numbers on my iPad Mini (16GB Wi-Fi)? If Yes, then can I directly load these files to my iPad mini using iTunes?

Can I view, edit and save microsoft documents such as Word, Excel and Powerpoint using iWork applications such as Pages, Keynote and Numbers on my iPad Mini (16GB Wi-Fi)? If Yes, then can I directly load these files to my iPad mini using iTunes? Also, once I finish working on these documents, can I download these back to my Computer.

Sorry, forgot to say:
Thank you so much to EVERYBODY/ANYBODY who may reply with helpful information,
Bob :) :) :)

I cannot open the pages document created on my ipad when using my Mac. I've tried downloading the update but it needs Maverick. I've tried downloading Maverick and it fails.

I cannot open the pages document created on my ipad when using my Mac. I've tried downloading the update but it needs Maverick. I've tried downloading Maverick and it fails.

What OS version are you running?
Try the upgrade button here:
http://www.apple.com/osx/how-to-upgrade/

I cannot open Keynote and Pages in iPhone/iPad iOS 7

After updating to iOS 7 and iWork for iOS, I'm no loger able to use iWork for iOS when iCloud is turned on.
I've two apple accounts, one for Mexico store and another one for US store. A couple of yeard ago I purchased Numbers for iphone/ipad using MX account, and Keynote and Pages for iphone/ipad using my US account.
Before updating to iOS 7, I was able to use iCloud for keynote, numbers and pages without any problem. All my documents were backed up on the MX account in iCloud. My iphone/ipad was logged into iCloud using my MX account all the time.
After updating to iOS 7, I keep using my MX account for iCloud, but I'm no longer to open Keynote and Pages (which were purchased with my US account) when iCloud is activated for them.
What's going wrong with apple?! I think iOS 7 is very buggy and it is the worst OS they have ever make available for users!!! Can't believe the amount of errors I keep finding in most of Apple apps!!!
Please advice! Regards,

This is the discussion for Keynote for Mac.
Post this in the iOS discussion here: Keynote for iOS

Apple TV loses wireless network connection when using AirPlay from iPad or iPhone 5

Our Apple TV loses connectivity to our wireless network while using Airplay from our iPad or iPhone 5. This started occurring after the latest iOS update. We are able to wirelessly stream movies from iTunes without any problem. This issue occurs only when using AirPlay. Does anyone have any suggestions?

I have a:
new MBPr 15" late 2013 with dedicated graphics card
new airport extreme base station
3rd generation apple tv
iPhone 5s
200mb download speed (not important, as streaming video on your local network has nothing todo with outside bandwidth)
All equipment is up to date software wise. Airplay mirroring from my laptop to my apple tv is ok. I get frequent lag, pixelation, audio skip (every 10 mins or so).
I'm using the 5ghz specturm to connect to the airport express so shouldn't have any inteference from my neibours (accordiing to iStumbler i'm the only person with a 5ghz setup using channel 30). I've tried connecting apple tv wirelessly and wired. No issues streaming from my iPhone or an iPad!
Surprisingly, using apps such as Beemer or Air Video Server on my MBP work better than native mirroring when it comes to video play back.
Strange when you think how Air Video works:
Video file lives on MBP
iPhone connects to laptop
Video plays on iPhone and is sent to Apple TV via Air Mirroring
Rather than:
Video played on laptop
Video sent to Apple TV
Seems bizzare that my iPhone can handle better streaming than my pro laptop.

Help please? I would not like the audio to mirror to my TV when using airplay from my MacBook.

I have a small music studio setup. I have an audio interface for the output of my macbook's audio. I like to use airplay with my macbook and apple TV. But when I use air play, my audio stop outputting from my macbooks audio output interface and mirrors through my TV speakers.
I'd like the audio to remain playing from my setup output but the screen I'd like mirrored through my apple TV and moutain lion.
Any suggestions?
Thank you in advance.
Nicky

There is no "corruption" involved - iTunes typically revises the format of its database with new versions, so these are not backward-compatible with prior releases. iTunes does, however, preserve the library file from the previous release when you upgrade. If you've already uninstalled iTunes 12 and installed an outdated version, you can skip steps 1 and 5 below.
Unistall iTunes 12
Delete or rename the iTunes Library.itl file (by default in C:\Users\username\Music\iTunes)
Locate the date-time stamped copy of the iTunes Library.itl file in the Previous iTunes Library folder (this should be the one created when you updated from 11 to 12)
Copy this file to the location identified in step 2, and rename it iTunes Library.itl
Install iTunes 11
Hold down Shift as you start iTunes, when you get this prompt:
click Choose Library..., navigate to and select the iTunes Library.itl file from step 4, and click OK.
"Opening past libraries" doesn't work if you're simply double-clicking on the old library database files in the Previous iTunes Library folder - this will just launch iTunes and load the current database file.

Video and audio formats for iPad

Hey, guys.. I've tried searching this up in the forum but didn't have any luck with that..
I can't seem to upload my movies and songs into iPad... I tried converting my movie into .mov and .mp4. They can both be imported into my iTunes library but when I drag it to the iPad tab it says it cannot be copied because it cannot be played on the iPad. And some of my albums just can't be imported.
May I know the preferred format for my movies and my songs? And what could be the problem with my importing..
Thanks heaps.

Here are the spec for video and audio for the iPad:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

ICloud keeps crashing my iPads when using photo stream

iCloud keeps crashing my iPad when using photo stream, photo stream has downloaded over 600 .png files to my photo stream which are mac icons - these are causing all 3 iPads on iCloud to crash and report .panic.plist error messages. Help? I have turned off iCloud for now which allows the iPad to work.these icons were on my iMac too on iphoto which I have deleted and on our iPhones again which I have deleted. Would like to use iCloud but not until I can fix this issue.

Hi elizabethfromfernhurst,
Welcome to the Apple Support Communities!
If you are getting the .panic.plist alerts on your iPad when using iCloud, I would suggest restoring the iPad back to its factory settings and using iCloud to sync your data back to the device.
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Have a great day,
Joe

Ipad when using public wifi

Is there any way to protect an ipad when using public wifi

Don't send any sensitive information over unsecured WiFi. This would include banking details, credit card numbers and the like.

IPod nano 6gen does not send audio to home stereo when using an older (iPod classic) dock.

iPod nano 6gen does not send audio to home stereo when using an older (iPod classic) dock. Is this a functional discount or something else? [This system has worked with iPod Classic and Nano 4 gen.]

Perform the instructions for your version of Mac OS X on this page.
(15457)

HT1583 When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls

Hi, please help me When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls help

Hi
My first two thoughts
• Shared to Media Browser - BUT as Large or HD - try Medium !
• audio from iTunes - use to go silent
- in iTunes
- Create a new PlayList with needed audio
- BURN this as a standard Audio-CD (.aiff) - NOT .mp3
- use the files on this CD in Your Movie project - I ALWAYS DO - and only use .aiff ever - never .mp3'
My notes on this:
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

I find it difficult to instal keynote and numbers for my iPad air

Hi
i find it difficult to instal keynote and numbers for my ipad air
<Subject Edited by Host>

Can you provide a little more detail, such as what happens when you try, or why specifically you "find it difficult"?

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

Keynote and Audio Idiosynchysies on iPad when using AirPlay

Similar Messages

Maybe you are looking for