Keynote audio for Windows

I'm trying to prepare a slide presentation in Keynote, that I'll export into Windows.  I can also prepare the presentation in the Mac Version of PowerPoint in Office.
My problem is in embedding an audio file.  I know AIFF will not work on a Windows machine.  I've embedded a .wma file, and it doesn't seem to play, either.
What audio file format do I need to embedd into the program so that it will play on a Windows machine.  Obviously, almost any type of file will play on a Mac, but some of the viewers of the presentation are not yet enlightened.
Many thanks,
Czet

These files are Windows Media Audio and are specifically designed to play on Windows. You should test  the wma file on a Windows machine, if at all possible using Windows Media Player, to test the file will play at all.
The issue with exporting Keynote to PowerPoint is the link to the sound file is lost during export.
The sound file is exported to a separate folder called Keynote.ppt_media, this must be copied over to the windows machine with the PowerPoint file or there will be no sound file to use.
The work around is to open  the exported PowerPoint  file in   Windows or Mac version of Powerpoint, delete the sound file and then replace it using;    Insert > movies and sounds.

Similar Messages

  • Keynote viewer for Windows

    Although I am an Mac user I defend that Apple should think in build a Windows version of iWorks. But if this is not possible a Keynote viewer for windows is an urgent must.
    Thank you
    Orlando Figueiredo

    Ask the same thing recently to Apple feedback, Keynote is fantastic but it is a nightmare when making a presentation for PC, either Keynote for windows or right at least a reader, otherwise Keynote will loose interest except for my own stuff

  • OT: looking for Logic Audio for Windows XP

    Apologies for the crass request, but I'm looking a cheap copy of Logic Audio that will run on Windows XP. I just found some old Logic Audio recordings I did years ago, but I've lost my LAGW 4 CD, and in any case, I'm not sure if LAGW 4 even worked on Windows XP .... I've come to love Macs at work, but I haven't saved enough to make the move at home.
    Thanks,
    Kevin Murphy

    I assume the key you refer to is analogous to the dongle I have for LAGW, and it sounds as if you are not willing to part with yours . I don't care much about stability, since my main interest at the moment is to do an audio track dump (with edits) and MIDI export so I can continue working in Cubase in the near term. Contact me at [email protected] if you are willing to help me out. Otherwise, I'll keep looking. It's frustrating ... there must be many thousands of people out there with unused copies of Logic Audio for Windows, especially since it was never very stable, even on Windows 95 .

  • I have several Files created in Logic Audio for windows bfreo v 5 wich  can't open in Logic Pro X. Any ideas for a solution to his problem,

    I have several Files created in Logic Audio for windows before v5.5.1 which  can't open in Logic Pro X. Any ideas for a solution to this problem, The Windows files that were created in v5.5.1 open OK.  I lost my XS key during a recent house move so can't update to windows files before trying to open in Logic Pro X
    Swingtones

    If you can open the windows files  in windows you can bounce the tracks out as audio. Then load them in X

  • No Audio for Windows 7 bootcamp, Tried to fix multiple times, STILL FAULTY!

    I have a macbook pro 17" OS X 10.6.4, I'm running windows 7 on bootcamp, and everything is up to date except my bootcamp which is at version 3.0.2.
    I have no audio and there is that red light inside my headphone jack, I can hear sounds when my headphones are plugged in but they are ridiculously quiet. I have read up on this problem just about everywhere I could find and have tried anything from installing the most up to date Realtec audio driver, to reinstalling the OS X CD drivers, to even the "poke around until you hit a switch inside the jack" trick.
    While poking around inside the red lit jack I've had it go off, only to turn back on as soon as I try to watch a video or anything with audio. So that doesn't work for me apparently.
    I'm out of ideas and I dunno what else to do. Somebody please help!

    I have the same problem, with vista, on an intel iMac.
    I tried uninstalling the driver, restarting, and then bootcamp automatically reinstalls the driver, but that didn't fix it. The driver is there and everything appears to be as it should but just no sound comes out unless I set headphones to the default, in which case the audio is way too quiet.
    I'm trying to repair my bootcamp install from my leopard disk but I got an error code 2727 and couldn't even attempt to try fixing the issue that way.
    It's so annoying, because I'm trying to play starcraft ii, which is impossible macside because mac os insists upon having ridiculous mouse acceleration. I managed campaign macside but now it's time for some serious competitive play and I just need to do this on windows, but no sound.

  • Compatibility with Logic Audio FOR WINDOWS

    Hi
    I'm considering buying a MAC to do sound recording on. I used to do sound recording on a PC using emagic Logic audio gold 4, running Windows 98. I still have all the old .lso files. Any hope in heaven of asking a mac running Logic Pro 7 to recognise these? If Apple's as clever as it seems to be, this should be doable shouldn't it?
    Thanks
    Electric Ray
    Dell   Windows 98  

    You should probalby post your question in the Logic discussions:
    http://discussions.apple.com/category.jspa?categoryID=156

  • No Audio For Windows XP HP Nc6320 Compaq

    Hello! I finally found this thread and hoping that you can help me solve my problems.
    I am trying to install the UAA Audio Bus Driver and ADI SoundMax to my laptop because this is what I think the reason why it has no sound at all. It still shows in my device manager that it has yellow question mark on the logo and I know that it needs updates. The name appearing in the device manager is not UAA driver but "Multimedia Audio Device" and the name that must be SoundMax is "Unknown".  I tried to install and update the device but updating is my problem.
    Please help me.

    Hey Brian,
    I had the same problem as you. After scouring the internet I found the solution and collected all the directions and necessary files for future use. You can download everything you need from my .mac public download page under the folder name "XP Sound Fix". Hope it works for you!
    http://homepage.mac.com/WebObjects/FileSharing.woa/wa/default?user=nitejrny&temp latefn=FileSharing41.html&xmlfn=TKDocument.41.xml&sitefn=RootSite.xml&aff=consum er&cty=US&lang=en

  • Presentation made for windows

    Im trying to make a presentation in keynote but then be able to play it with all effects etc in a windows pc. How will i do this?

    The short answer is you can't, at least not easily and without possible glitches. Keynote uses effects that simply aren't available in PowerPoint, and the technology differences between OS X and Windows means there is not a "Keynote Player" for Windows. The best results you'll get are to export your presentation as an interactive QuickTime movie -- this will support the "click for next slide" functionality of the presentation, and capture all the transitions and animations in video. The downside is that the Windows machine will have to have QuickTime installed (and likely the latest version at that).
    If you don't need the interactivity, you can export the presentation as a QuickTime movie, then convert it to a more Windows-friendly format like AVI or MPEG using a standard video app. You may lose some video quality in the conversion, however.

  • No Audio on either end Cisco Jabber for Windows over Cisco AnyConnect

    Our telephony staff is replacing our aging/unsupported VoIP system with a Cisco system and as the network tech, I'm trying to get Jabber for Windows to work over our AnyConnect VPN client.  Jabber to Cisco phone and Jabber to Jabber calls work fine within our LAN.  
    However, when I take a laptop to a separate internet connection and connect to the network via the VPN, I can't get any audio to pass across the system, in either direction.  If I call a phone on our LAN using the Jabber client (via AnyConnect), the phone rings and when I answer it, it's just dead air on both ends.  If I reverse the process, calling from the phone to the Jabber client, the same thing, Jabber client rings, but dead air both ways once I answer.  
    Things I can do from the laptop over the VPN connection:
    I'm able to get to the phone's web interface using that same laptop.
    I can ping the phone as well.  In fact, the VPN profile I'm using has full access to the entire VoIP Vlan including all IP traffic (all ~65,000 ports).
    Searching the address book also works fine.  I can search for staff and it's pulling directly from our Active Directory environment.
    Is there any special settings on the firewall that I need to setup to allow the voice traffic (which I assume is RTP traffic)?  I tried to add a service policy for RTP traffic, but that didn't seem to work...unless I built it wrong.
    Jabber for Windows - 10.6.0
    Cisco Anyconnect - 3.1.06079
    Cisco 5515-x ASA - 9.2

    I was able to resolve this on my own.  I thought that SIP traffic needed to be inspected via the global inspection policy in order for it to pass through the firewall. I ran into the same issue with ICMP traffic from an Anyconnect client to LAN devices. I had to enable ICMP in that policy for us to be able to ping LAN devices over the VPN tunnel. So when I saw that SIP was already being inspected by this policy, I moved on looking for other solutions. Then I stumbled deep within a Google search (almost hit the end of the Internet doing so) where someone mentioned that SIP shouldn’t be inspected by that policy. So I unchecked it and bam! Voice is now working over the anyconnect client to phones on the LAN. 

  • Unable to select 'Use Phone for audio calls' on Cisco Jabber Client 9.6 for Windows

    Hi,
    I have recently deployed Cisco Presence Server and integrated with Call Manager 9.1.2. I have successfully deplyed 6700 users on IM & Presence. Some of the users requested for Cisco Jabber with phone control.
    I have added CFS client on the Call Manager and associated it with the same extension numbers from their desk phones. I am currently able to make audio and video calls for these specific users. I am currently using Cisco Jabber Client 9.6 for windows. I have users both daisy chained to their desk phones and who are not. Can you please confirm if it does make any difference.
    Problem Faced -
    I am not able to use to option use phone for audio calls. The phone comes down with a cross sign on it. At the same time Cisco Jabber by default uses the client and it works as expected.
    Can you please let me know if any of you guys have faced a similar issue.
    Please let me know if you need any information regading the configuration used.
    Looking forward for your valuable comments.
    Thank you.
    Regards,
    Joseph Chirayath.

    Hi Will,
    I am attaching the screen shot for the END USER on CUCM 9.X that has been configured on Cisco Jabber.
    Please do let me know if you need any further information.
    Thank you.

  • I have iTunes version 10.7.0.21 for Windows 7.  It was working fine untill recently.  Now when I play a T.V. show the audio cuts in and out, the video pauses intermittenly and also intermittenly fast forwards.  What is causing this and how do I fix it?

    I'm having problems with video play back in itunes 10.7.0.21 for windows 7.  Video was playing fine, but now I'm having audio issues.  Audio cuts in and out.  Also video pauses and fast forwards.  Does anyone know what would cause this all the suddenly?  More importantly does anyone know how to fix this?

    All sorted now. Thread can be closed!

  • Audio and video out of synchronization in iTune for Windows 8.1

    When playing back a downloaded iTunes file, the audio and video are out of synchronization a lot of the time.  The audio can be several seconds behind the video.
    How can this be corrected/fixed?
    I am running the latest iTunes software on a 3.8Ghz AMD-processor machine running Windows 8.1.

    Hi John,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it provides a lot of great troubleshooting tips that you can try, which will resolve most video playback issues in iTunes.
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    I hope this helps.
    -Jason

  • How do I get Quicktime Pro for Windows to save audio files?

    No matter what I do QTP for Windows only saves .mov files. I am trying to create a new audio recording but the only file type I can save is movies. I bought this product specifically to try and migrate old cassette music to itunes. Any clues as to how I should go about it?

    Have you tried Audio Capture software? This is dead easy on a Mac, plug it in and use something like SoundFlower (free) or Audio Hijack Pro to grab the sound.
    If you have registered QT Pro you should get:
    Menu > File > Export (Options): a wide range of formats
    May I ask why you are doing this? Unless the tape version is unique, you should avoid recording from old tape as it is the worst of all worlds. The quality is bad and changing it to digital is not going to make it better even with a lot of editing.
    Just bite the bullet and get CDs (which you can easily save to digital from iTunes) or buy the digital version directly. That way is much less painful and you have something you may actually want to listen to.
    Peter

  • Hp pavillion a6550d desktop audio drivers for windows 7

    asking for hp pavillion a6550d desktop audio driver for windows 7 operating system. tnx.. ^_^

    Hi:
    Accept the agreement.  Download and install the first or second driver on the list as applicable.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...

  • Output Module - Video for Windows - trouble selecting Audio Format

    Good day, people.
    Need help setting up AE to output .AVI with customized audio format, in my case it should be .mp3, but I would accept anything but the default uncompressed audio. (audio Output Format button is disabled when Video for Windows is selected)
    Of course I can output as-is and use external tools to repack audio data, but it seems awkward. If AE can output MP3-only audio, why wouldn't it output AVI with MP3. Probably I just don't know the right set of options, but I googled to find the answer for over a month with no success.
    Any hints would be greatly appreciated. Thanks.

    noonesshadow wrote:
    If AE can output MP3-only audio, why wouldn't it output AVI with MP3.
    Because it's a hack?! Even Microsoft does not officially support or endorse such combinations, it just has become common place when DivX and others introduced it, which is a whole different matter. If you get my meaning: On one end there are specs and standards, on the other end programmers that tend to get creative in the wrong ways. Anyway, the behavior you are seeing is correct. AE only supports uncompressed audio for AVI.
    Mylenium

Maybe you are looking for