Keynote doesn't export music when exproting into a video

when I do a video, the sound doesn't come through and endings end up going much longer then they are, making the video very patheticc and slow.
What am I doing wrong and how can I fix this?
If you need an example video, let me know and I will upload it.

I don't know if this is the answer you're looking for but I'll share my experience. Like you, I have three videos in my presentation. Once I exported it as a QT movie, the delays that I built in with the Inspector to allow the movie to play before the next slide transition, played AFTER the video ran. I went back and just put in a 1.5 second delay in and the videos run fine. I'm guessing that QT sees the video and allows it to play and THEN looks at the Delay setting.
Now if someone can just tell me how to get the audio soundtrack to shut down during my three videos but play during the rest of the presentation...

Similar Messages

  • Movie in Keynote doesn't export properly for QuickTime

    Hello all. I really hope someone can help with this. I've used the discussions before with great success so THANK YOU all for sharing your expertise.
    I've got a keynote presentation that for the most part exports perfectly on QuickTime. The only part that doesn't export right are the 2 videos I've got on the presentation. I set the timing with the inspectors for it to start automatically and even added a song to play along with the presentation. But when I export it, there is about an extra minute and 15 seconds added to the whole video and I've got the presentation timed perfectly with keynote and the song. I've got iWork '09 and QT 10.0. Not pro just player.
    I've played with the custom settings to no avail. Any way to get the videos to export exactly to their lengths?
    Cheers

    I don't know if this is the answer you're looking for but I'll share my experience. Like you, I have three videos in my presentation. Once I exported it as a QT movie, the delays that I built in with the Inspector to allow the movie to play before the next slide transition, played AFTER the video ran. I went back and just put in a 1.5 second delay in and the videos run fine. I'm guessing that QT sees the video and allows it to play and THEN looks at the Delay setting.
    Now if someone can just tell me how to get the audio soundtrack to shut down during my three videos but play during the rest of the presentation...

  • Doesn't play music when docked

    My iPhone 4 does not play music when docked on any type of docking station or when I plug it into my iTrip in my car. It still charges just fine, but immediately stops playing music when plugged in. When it is plugged into external speakers, it stops playing on its own speakers as well.
    I also have an unrelated problem that came up yesterday: my phone's power button is jammed up. I cannot even push it anymore. This is my 3rd iPhone in less than a year that has had this problem. I don't think I push the button very hard at all, not anymore than anyone else. What makes this happen, and can I get it fixed without paying out the *** and without taking it apart myself? I got my phone from Best Buy as I don't have an Apple store within 150 miles of me. I am currently using AssistiveTouch instead, which is just plain annoying. Please help with either problem if you can!

    Recently, I have the same problem but with my B&W Zeppelin, and it turned out it was the problem of B&W and has sent it for service.

  • Keynote problems OSStatus error -12945 when trying to play videos

    I am trying to run a Keynote version 5.1.1 (1034) presentation on my new machine which has Keynote 6.1. Everything works except the embedded videos which give me this error notice OSStatus error -12945.
    Does anyone have any advice? I've got to give this presentation in a few days. Yikes!

    Use Keynote version 5.1 and update to version 5.3
    Transfering version 5 files to Keynote version 6 will cause problems.

  • Keynote does not export music into a Quicktime Movie

    I created a 75 frame Keynote 08 presentation with looped music and exported it into a Quicktime movie, but the music does not play. The audio does appear in the Quicktime "Properties" but does not play. Help!

    My apologies! I went about a VERY lengthy search and just did not find anything to my satisfaction other than people stating that they had the same problem. Just search for phrases like 'Keynote music export QuickTime' and I guarantee you'll find a lot of results. My best bet was to export the movie (went fine) and then to import the movie into iMovie, add the soundtrack and re-export. My main problem was figuring out the best format from iMovie. Choosing the wrong one gives absolutely horrible movie quality compared to the Keynote export.
    The frustrating thing is that you can't tell the movie quality until a, oh, 15-30min rendering of your movie depending on the size and trying that with several setting arrangements adds up to too much time for me. For my situation, I was able to just play the movie and play a cd on a boombox in the background. It was not my desired choice but after hours and hours of trying I gave up...
    Sorry I'm not more helpful. It just looks like this is a bug Apple needs to fix.
    -John

  • My premier keeps canceling and shut down on me. When i export files it doesn't export music.

    da

    juvan
    What version of Premiere Elements and on what computer operating system is it running?
    Is this a "it worked before but not now" or a "it never worked before".
    You have not supplied enough information for us to help you. Please give us details to help us to help you.
    What are the properties of the files that you are importing into the project? Are you working with iTunes music?
    What is the project preset that you (manually) or the project (automatically) is setting to match the properties
    of the source files?
    Other questions include:
    1. Are you running the program from a User Account with Administrative Privileges?
    2. Do you have the latest version of QuickTime installed on your computer with Premiere Elements? Does the
    problem exist if the computer's antivirus and firewall(s) are disabled?
    3. What are the details of your export choice(s) for your Timeline content?
    4. Are there any error messages associated with any of these problems?
    5. Others, including details of computer resources and setup of Scratch Disks.
    Lots to be sorted out to get to the core of the problems.
    If any questions or need clarification on the above, please do not hesitate to ask.
    Thank you.
    ATR

  • How to ensure I don't lose songs on iPhone (Match music) when logging into another account

    Hi all,
    I hope I get some answers here, I'm struggling with an issue I've been having.
    I have my songs set up through iTunes match, which is fine.
    However the issue I have had is when I sign OUT of my account and into another (to update an app or such) I've had issues where the songs that were previously on my phone get deleted.
    While I sort of understand that, at the same time when I'm just signing out for a few minutes, to lose that and have to download multiple gigs of music AGAIN and AGAIN is beyond irritating. I know the easy answer Is to just not sign out, but I want to have that flexibility if I need to.
    Is there anything I can do here?  Any help would be greatly appreciated.
    Nick

    Oka, another question I have then, which is frustrating me beyond belief, is why, if is Tay logged into my match account, songs are oftentimes deleted from my phone?
    I have a playlist of "new" music that has about 600 songs in it. That playlist will randomly dump hundreds of songs, leaving them to show available for download from match, but they are removed without me having deleted them.
    Now, 2 things happen on my main PC where I set up match. The first is that randomly, with little fanfare, match will just shut itself off. No explanation, just stops.
    The next is that I have multiple iTunes accounts and in order to update the apps in those accounts, I have to sign into another account, update, and then sign back in. Each time I have to turn match back on, which I do. It takes all of 2 minutes and according to a less than scientific test I just did, it doesn't seem to cause song deletion from my phone by doing this.
    I'm getting very frustrated that a service I pay for, while being somewhat convenient from time to time, is causing nothing but problem upon problem. I can't be the only person juggling multiple iTunes accounts on each device, can I? =\

  • Disable iPhone from playing music when plugged into USB in vehicle?

    Drives me crazy because when I plug iPhone into my USB on GMC Terrain it goes to iPhone music.  How can I stop this? 

    I agree with this persons comments.  Toyota insists that this issue is caused by the Apple iphone.  The car is only receiving the signal.
    I have attempted to remove all music files from the iphone,  but the iphone will not allow me to do this.  It automatically saves one music file in memory and then plays that song EVERY time I plug the phone into my car. 
    It might be time to try a Samsung phone...

  • How do I get my iPhone 5 to stop automatically launching Music when plugged into my car USB port?

    For quite some time, my iPhone has been set to automatically launch Music -- on the first song listed alphabetically -- as soon as I plug it into my car's USB port, which I use both for connectivity and for charging. It's enough to have made me hate a song I used to love: if I hear the opening riff of "The A Team" one more time I think I'll throw the phone out the window!! LOL Seriously: I've seen fixes for this in other posts, which apparently referred to older versions of iTunes, and required the "Stop AutoPlay" function to be initiated OUTSIDE the device, in iTunes on the synchronizing computer. That makes no sense to me. I've searched but cannot find a current fix. Am I eternally doomed to suffer this annoyance? Thanks!

    Disable any security software on the computer and try again.

  • My 1st gen ipod touch suddenly doesn't play music when i restore it to its default setting because it was sync in my old computer

    how can i fix my 1st gen ipod touch it was originally sync to my other computer, but my old already died on me so i have to sync it again to my new computer. Problem is after i update my 1st gen touch and erase my old files suddenly my newly sync music is not playing how can i fix this please help

    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable           
    - Also, confirm your security software and settings are allowing communication between your device and update servers.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     
    If  you  have iOS 4.2.1 or later on the iPod and there was version compatible with that version, then you should be able to get a compatible version by:
    App Store: Downloading Older Versions of Apps on iOS - Apple Club           
    App Store: Install the latest compatible version of an app

  • Exporting Music from Itunes into Premiere Elements

    How can I import an audio clip into a project using Premiere Elements 10?
    All the formats listed from itunes are not accepted.

    Using iTunes you can convert the audio to MP3, which will work in Premiere Elements.
    Unless it's copy protected, as many iTunes songs are. (Which is why I buy my music from Amazon.)
    To get around copy protection you need to burn your iTunes songs as a CD and then use Windows Media Player to rip the music back to your hard drive as an MP3.
    For best results, in fact, download the free program Audacity and use it to convert the MP3s to WAV files, the ideal audio format for Premiere Elements.
    iTunes has been relaxing things a bit lately -- but it used to take a remarkably convoluted system to make their music usable in a video project!

  • Keynote doesn't export in Quicktime

    Hello!
    I have a problem with a Keynote file: I must show this presentation on PC and so, I want to export it in Quicktime (because there are many animations and hyperlinks).
    But, if I export it, I get the error message, that the Keynote file cannot be exported in Quicktime, because the volume hasn't enough disk space or there is a problem with the file.
    I have enough disk space (more than 75 GB) and all my files, which I imported to Keynote, are okay.
    Can anyone help me? Because I can't find any solutions at the Apple homepage or other websites.
    Thanks!
    Message was edited by: LadySue

    I've also had this problem in the past, but based on the suggestion of another member of this forum I tried exporting my presentations using the Custom settings menu and then selecting MPEG-4, 30 Frames per second, and Best quality. The presentations have exported perfectly.
    Good luck.

  • Keynote 08 - problem exporting to Quicktime (no sound or video clip)

    Hi
    Having just spent a long time making and narrating a training slideshow intended for a screencast using Keynote 08 (4.0.3) I choose to export the show as a quicktime movie with the recording timings and recording narrative soundtrack. A screenshot of my settings is below.
    The problems I have are:
    1. The recorded narration is not present in the QT Mov file
    2. A video animation of an embedded movie (screen capture) displays the first frame but does not play automatically
    The show works fine if I play it in Keynote, but this is no good as I want to put it on the web!
    Uploaded with plasq's Skitch!
    If anyone has any ideas or similar experiences, please let me know
    Thanks
    Nick

    Just thought I would add my voice to the chorus... I am having the same problem.
    Also note that this error will prevent you from being able to "Send To">"YouTube" as well.
    I am seeing the exact same issues reported here by everyone else. Not sure what update screwed this up, but it was working fine less than a month ago (I do a series of 5 keynote presentations each month and it worked for the first one I did on June 7 but has not worked for the last two I tried).
    I am also in need of a fast solution for this. I am pretty much dead in the water till I get a solution going.
    My flash export also results in out of sync audio. Do I have to dig up powerpoint?
    Also, it looks as if Quicktime is having a hard time with the file. Quicktime suddenly becomes very sluggish (IE: tons of delay when you click on menus or on pause when the keynote export is playing). Quicktime is NOT having these problems with video files from other sources.
    R
    Message was edited by: Robert Whitelaw

  • How come my Ipod Touch will only charge when plugged into a computer and not a docking station or wall socket?

    My IPhone works with both the charging USB cable as well as the wall socket and docking station.  Additionally, my IPod used to charge using both the wall socket plug in and the docking station.  My IPod will stay play music when plugged into the docking station, but won't charge.  Further, when I plug my IPod into my computer all it will do is charge and is not recognized by ITunes.  I have done both a soft and hard reset.

    If the iPhone has no problem with the same cable then
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • My iphone will not get off the apple logo screen. it also will not let me reset it and won't restore when plugged into my mac. what should i do?

    my iphone 4 will not get off the apple logo screen.
    I've been trying to rest it for several hours with no luck.
    It also doesn't do anything when plugged into my mac,
    itunes will not recognize it at all.
    what should i do?
    thank you !

    Try DFU Mode Restore. Open iTunes on computer, connect iPhone to computer, hold both Home and Power buttons for exactly 10 seconds, then release the Power button, keep holding the Home button, for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Then click the Restore button of iTunes.

Maybe you are looking for

  • Creation of new product hierarchy and products in SAP CRM.

    Dear all, please help with resolving of following issue: In CRM system base hierarchies were replicated from R/3 system with materials. Current requirement is to create new materials in CRM directly (as standalone scenario). As far as I understand, I

  • LDAP: error code 53 - Function Not Implemented

    Hi All, While doing search on Oracle internet directory server(oracle ldap server), we are getting following exception. Exception in thread "main" javax.naming.OperationNotSupportedException: [LDAP: error code 53 - Function Not Implemented]; remainin

  • What is the maximum resolution of the display port on the X200s dock?

    I would like to purchase a new ultraportable and monitor for my home office. A 30 inch screen is in my price range, but not all devices support such a high resolution. What is the maximum resolution that the dock which connects to the X200s can outpu

  • Exclusion indicator

    what is the use of exclusion indicator in access sequence ?

  • Air 3.6 and the fl package

    I just switched over to air 3.6 in Flash Professional. I'm compiling with air 3.6.0.5990 which I believe is the latest version. When I start a new Actionscript 3 file, and include a TLFTextField, and then compile for Air for IOS the app won't run. Th