Keynote exported QT movie only 1 fps???

When I export a Quicktime from Keynote it produces a really nice looking ProRes (LT). Looks just fine. Bring it into FCP, and there is something drastically wrong. It seems to lock onto one of the slides, and then plays that slide to the end of the movie, even though the audio moves forward as it should.
I looked at the formatting and discovered that the Quicktimes coming out of Keynote all have a frame rate of 1 fps. Which is what must be causing the problem.
And which is also very weird, because it plays like a normal movie when I open it in Quicktime, but then has all sorts of problems in FCP.
Any suggestions?
Ben

As my brain is somewhat fried, can you suggest how to convert the video (settings), and what program to use.
If you already have QT Pro authorized or MPEG Streamclip installed, I would use either as the easiest method of conversion. If you have neither, then you can always use GarageBand -- just takes a bit longer to import/export your clip. A better question at this point might be the question of which format to convert to here. DV, of course will work with any version of iMovie. AIC, M-JPEG, MPEG-4, H.264, etc will all work iMovie '08. If file size and storage is not a problem, any of these will do and I would recommend not limiting the video data rate to retain as much quality as possible. If files size/storage is a problem, would probably go with H.264/AAC conversion and only limit the video data rate as much as is needed to "fit" the file in space you have available. DV will likely create the largest files for a given source file while data rate limited H.264/AAC will produce the smallest files with best quality for limited data rate allowances.

Similar Messages

With iMovie 9.0.4 can export to .mov only. Rest of formats: error -50. What can I do? Thx.

With iMovie 9.0.4 can export to .mov only. Rest of formats: error -50. What can I do? Thx.

Just as a preventative measure try running Disk Utility in the Utilities Folder inside the Applications Folder. Run Repair Disk Permissions on the whole hard drive.
According to this disuccsion group posting on MacRumours.com, Error -50 is a permissions error and repairing permissions may be enough to get you going again:
http://forums.macrumors.com/showthread.php?t=1151402

Export Quicktime Movie only exports fades and composites (FCP6)

I'm trying to add a couple of lower thirds and a fade in and out to a live capture of a lecture; but for some reason, it's only exporting the effects - the fades and lower thirds. Everything else is skipped in the final QT movie.
I right-click the sequence and say 'Export > QuickTime Movie', leaving the settings as they are. The exported movie is 1.45GB - around the same size as the imported movie - but it's only 29 seconds long. Can anyone enlighten me as to what's going on? I tried clicking 'recompress all frames' but I have two problems with this: (1) it's going to recompress unnecessarily, and (2) it's looking like that will take about two hours.
Any help would be appreciated.

FCP6. Right there in the question title. Version 6.0.6, if that's important.
It was actually recorded off WireCast, with one camera and desktop streaming. Sequence settings are 720p square pixels, H.264 video.
Export from the File Menu has the same effect.

10.0.1 imports of .mov fail , keynote export to movie

I have run into a problem importing a .mov file in imovie 10.0.1
The files are ok I started imovie 9 and the import fine, but no such luck with 10.0.1
I get the no importable files dialog.
The file is openable in quicktime and I have tried alsorts of conversions but imports still fail
quicktime movie inspector shows
Video H.264, 960 x 540
FPS 0,4
This is a slide show export from keynote and or powerpoint.
help
Just checked a .mov from a canon camera does import ok.

Yes .mov files can use a variety of codecs some of which are not importable into iMovie 10. You will need to convert them into something which is accepted. If you open them in Quicktime 10 you should be able to save them in another format or you can use a third party app like the free Media Converter (http://media-converter.sourceforge.net).
Geoff.

Movie within Keynote, export to quicktime transition delay

I have a very strange problem I can't seem to figure out. I create a Keynote presentation every week that is used to show our announcements at our church. I create the keynote with automatic advancement, then export it to a quicktime movie (which is then put on an iPod and used to project at church). It wall works very well and I have used this for several years. Here's my problem:
I inserted a movie into a slide in Keynote, the movie is about 30 seconds long and I am playing about 10 to 15 seconds of it. I then have the slide transition to another slide. When I play the keynote it all seems to work great - however, when I export the movie via quicktime, it plays through the movie then hangs for 10 seconds or so at the end of the movie before making the transition to the next slide. It is apparently "stuck" for that time. I have played around with every setting I could find to see if I could get it to work right but nothing changed this behavior. I tried shortening the movie length under the quicktime tab in the inspector, changing the delay in the slide tab in the inspector, nothing.
To make matters worse I apparently can't just cut out the 10 seconds of offending material via quicktime pro as it somehow only registers by the slide number and I cannot get the index arrow to pick a portion of the movie to splice.
Its all very frustrating - I've spent about 3 hours on this silly thing this evening telling myself "it can't be this hard." But either I am really missing the obvious, or there is a bug in Keynote, or this just can't be done.
BTW I am using Keynote 09.
Any help would be very appreciated. For tonight I've given up on the movie and just cut that part out.
thanks.

You've found one of my frustrations...here's the way it works:
In keynote, you MUST set the slide delay for a movie to stay on screen, and you can see that you're able to transition before the movie is done by cutting the delay shorter than the movie. The draw back is, if you want the whole movie to play, you MUST set the delay to at least the same length as the movie.
When exporting to QT, this doesn't work. The export forces the movie to play in its entirety. If you weren't trying to cut the movie short, you'd still have to remove your auto advance delay so that it transitions after the movie plays. This is why you're seeing that long hold, it's counting your movie length AND the delay time you added in Keynote.
The only thing I can suggest is removing that transition delay and living with the movie playing through to the end. You could always trim the movie in QT Pro and use that in Keynote I suppose.

I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

So, I downloaded a slideshow templates and I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

What settings are you using to export the video with? I think 29.97fps is the only one that works with LR 5:
http://lightroom-blog.com/2013/09/17/timelapse-again-in-lightroom-5-2/
http://lrbplugins.com/shop/presets/lrb-timelapse-presetstemplates/

Quicktime Export - Keynote, Streaming, and Movie Controller Settings

A few questions regarding qt export from keynote -
Is there a way to save quicktime export settings in keynote? Right now I'm exporting multiple files to custom sizes, and have to manually enter the size every time.
I'm exporting for streaming as well, and have to select it in the qt settings window every time.
also, is there a way to choose to show the movie controller when exporting a movie? Now I have to open the movie after export in qt pro and choose window>movie properties>presenation>movie controller type>movie controller (it defaults to none when exporting from keynote).
also, oddly enough, is seems that saving the movie after choosing to show the movie controller removes the streaming setting (movies wait to load completely before playing).
Thanks!

No answer to the main question...but the final question--
When you edit a QuickTime movie, even if the edit is merely to change the settings on the controller, it breaks fast-start. You should be able to fix it by doing a "Save As..." instead of saving the movie in place. But that doesn't seem to work in all versions of QuickTime; I have noticed that certain versions of QT-7 seem to break fast-start altogether.
There is an app out there called "Lillipot" that will fix this for you. Drag your movie to Lillipot, it does whatever magical conversion is necessary to make fast-start work again.

No more alpha in exported QuickTime movie from Keynote '09

Hello
In Keynote '08, I create a slide with no background (None).
I add some text with some fancy text IN and OUT features.
I export using the Animation codec and the transparency option.
When I reimport the movie in another Keynote '08 file, it inherits the transparency of the imported file and thus everything is perfectly blended.
In Keynote '09 it is not possible anymore.
Even if I import an exported QuickTime movie from Motion with a transparent background, it is not possible to have a perfect blend, all layers are opaque.
Last but not the least, adding transparent files on top of each other in QuickTime player does not preserve transparency despite the fact that the Animation + transparency features are added in the files.
Thank you in advance.

Hey Gary - first off, thanks for your reply! I am currently forcing spotlight to re-index to see if that might help me out. After that I will try your suggestion and run a system software check.
I need a ProRes export as this is going to be combined with IMAG footage from a live presentation as well as additional video from an Arri Alexa. I want to preserve as much quality as possible so that there isn't a discrepancy in the final edit. Originally, I was rendering a small test to the desktop to gauge output quality of animations etc. I did go ahead and re-export a second time to an external drive, but it doesn't seem to matter as Keynote appears to initially render everything to the startup drive no matter what. The second export still ate about 15 gigs from my startup disk and I am unable to find any sort of temp files anywhere!
I am showing all files in Finder and searching around the ~/private/tmp folders to no avail. In the image below there appears to be a discrepancy in the size being reported by finder and the size I'm seeing listed in terminal...

Quicktime movie only has the first song in the play list. after export

when I export an album to quicktime the quicktime movie only has the first song in the play list. The slide show works in i photo with all songs in the playlist but the quicktime only takes the first song and repeats it over and over

I used the garage band method to string the songs together. Then used the mega song to play with my album. and it even exported to the quicktime movie. Thanks for the post.

Exported movies only have first few frames of audio

Hello everyone,
I've encountered a strange new problem with Premiere Pro CC on the PC.
For some reason, every time I export a movie now, no matter the format, it only contains the first few frames of audio then drops out everything else immediately afterward. The video tends to play fine, but the audio is just completely missing after a few frames.
I feel as though it's some sort of muxing issue, but I do not understand why it is happening
1. I have not had any major software updates, and my hardware has been the same.
2. I have tried exporting with and without GPU acceleration.
3. Just three days ago, on April 4, everything was working fine.
4. When I open the project on my MacBook Pro, everything exports just fine.
5. The audio always plays just fine when playing it inside the project, both on my PC and my MacBook Pro.
6. A seemingly related issue is that some videos have been randomly failing exports in Media Encoder (this has never happened when exporting directly from PrPro, though). The error message I get is:
- Encoding Time: 00:04:18
04/07/2014 03:21:12 AM : Encoding Failed
A low-level exception occurred in: H.264 (Exporter)
Export Error
Error compiling movie.
Unknown error.
Does this have something to do with a recent PC Premiere Pro update that I was not aware of?
Here are my specs:
Windows 7 Ultimate
Intel Core2 Quad CPUQ 9550 2.83 ghz
8 gigs of ram
NVIDIA Geforce GTX 650
Audio is going through the motherboard, though I also have NVIDIA High Definition Audio and NVIDIA Virtual Audio Device (Wave Extensible) (WDM) installed.
I am also currently working off of external G-DRIVEs.
Anyone have any idea why this could be happening? This has been a very annoying problem.
I am going to try reinstalling PrPro to see if that will fix things.

I have viewed these files in Windows Media Player, VLC, Quicktime, and Media Player Classic. All have the exact same issue. They also have the exact same issue when played on a different computer (a MacBook Pro) with the same players. I have tried exporting in H.264 (.mp4 container) and MPEG2, same issue. They also have the same issue when I import the file I exported back into PrPro to play it back in there.
When I export on my MacBook Pro with Premiere Pro, everything works fine. This leads me to believe that it's either something wrong with the installation on my PC's version of PrPro or some hardware/software is interacting with my version of PrPro strangely, the latter of which I think is somewhat unlikely since it was working fine just three days before this issue came up.
When I re-installed PrPro, it gave me an error saying some optional components could not be installed. I looked into it, and it said that it could not install Visual Basic C++ 2008. which is fine since I already have it installed (both 2008 and 2010, and x86 and x64 versions of both).
I will try exporting one more time to see if the latest update today has somehow resolved the issue.

Keynote with embedded .mov exported to Quicktime and then WMV (Flip4Mac)

Hi,
I have a Keynote with an embedded .mov file (video and audio) half way through which exports to Quicktime fine ("Keynote .mov").
When I use Flip4Mac to convert the Keynote .mov to WMV the resulting WMV file works fine but stops when the audio of the Keynote .mov stops i.e. Flip4Mac doesn't render the last of the Keynote .mov
I have sought help over at Flip4Mac tech support forum but thought someone here might know the answer.
I have tried a variety of different .mov files in my Keynote but the same in all cases: export to QT is fine but Flip4Mac stops converting the Keynote .mov at the end of any audio.
I can extract the audio track and Flip4Mac will convert the Keynote .mov (video) all the way through.
Help?

what format are the movies you placed on your slides? This makes a big difference in if they get included in the exported QT movie.

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Trash the Preference file:
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
•I only use PAL (25fps)
Yours Bengt W

Keynote export to Quicktime with automaic slide settings doesnt work.

I made a Keynote presentation with automatic settings.
All the animation and slides are going automatically from the beginning to the end, I dont have to click.
But when I want to export it to Quicktme movie, it looses all the automatic settings and doesnt fit the background music .
Would be good to export the movie with the original settings, because it fits/syncronized to the music only with this settings.
How can I keep all the slide/animation settings during the export to QT movie?
Thanks

Thank you!
But I think its not an issue, and I found the solution!
You have to make a Slideshow Record first, with your automated settings/transitions, from the begining to the end: Menu-Play-Slideshow Record
After when you are ready, go to Export-QT Movie, and CHOOSE the SLIDESHOW RECORD, NOT the Self Playing option with the preset timings in the export dialogue box.
With this you can create a QT movie with your automatic settings/sliding/transitions.
For me its working.
=)
Hope I help to anybody!

IMovie Doesn't Export My Movie !!!

Hi, I've Been working on iMovie for a while, but today, I tried to export a 20 min. movie to a high quality with DV-PAL 25 FPS, it does export but it only play 9 second of the movie !!!
the file size is nearly 5 GB !!
I really need help !

it does export but it only play 9 second of the movie
What happens then? Program quits? It plays, but only black? You get a kernel panic?
Where do you play it? QT Player?
If you check the movie info in QT Pleayer, what does it say (regarding playing time for instance)?

Importing a Keynote export

I put a file from an keynote export 1024x768 into the timeline. FCP tells me to use clip settings, Along with this an audio file that in keynote repeated twice. The audio file I had to put in twice to equal length of visual clip. I say yes. The problem is when I export as a quicktime movie there is not picture and audio only runs for about 15secs. The movie should be 5min. What should I set movie for. I used default for quicktime using DVCpro NTSC. Should I change to H264?
I am trying to put this movie online as a streamed file video/audio together as one file.

1024x768 is not a standard production format used anywhere in the video industry.
NTSC is 720x486.
Redo your Keynote to reflect that or use one of the HD pixel dimensions such as 1280x720 or 1920x 1080. Yes, you will probably have to rebuild the Keynote slides. Dont forget to take safe area constraints into account if this is going to be shown on a TV or projection system.
Do not, under any circumstances use the H264 codec to edit with.

Keynote exported QT movie only 1 fps???

Similar Messages

Maybe you are looking for