Keynote Exporting Issues

To start... I have searched and found some answers to these questions that don't seem to work well.
I have created a Keynote Presentation with 4 slides, two with animated backgrounds, one sound effect on each one, animated Move-In, Out, & Actions, a background track, and a voice over. I'm having a few problems with all of that when I export.
1. The animated backgrounds stop moving during the "Preview" in KN and on the export, but in different places. I have selected "Loop" and it won't. The desired effect is to have it keep looping through the Slide Transition.
2. I want the background track AND voice over. When I try to adjust the volume of either for balance, the exported version (regardless of misaligned transitions) has both audio's at full volume. This feels like something I should be able to lock into place before the export.
3. Timing of animations and slide transitions is very different in the exported version. I've seen discussions on here to put the "Delay" to "0.0", but won't that effect my desired effect on the animations? or, is this something you do after "Recording" the voice over and it somehow remembers the delays? I'm a bit confused on this one.
I have always had the feeling of, when I say to myself, "there should be an easier way to do this," when it comes to apple stuff, there usually is. Thanks for any help you can give.

You might find the whole process a lot easier if you combine the background and voice over on one audio track.
If you don't have an audio editor, the freeware Audacity will do it all for you...
http://www.iwebformusicians.com/AudioFiles/Audacity.html

Similar Messages

Keynote export woes

Hi,
I'm putting together a small (2min) presentation/promo which uses Keynote transitions and animations synced to music. When I playback from Keynote, the timings for all the elements are fine. However, when I export as a quicktime, all of the transitions/animations speed up and are then obviously out-of-sync with the music... Has anyone else had this problem and if so, have a work-around/fix? D

Okay, so my work around endedup hinging on this:
Do not rely on autoplay timing (meaning assigning intro & exits times to your actions/builds within each slide).
If I export as an .mov without doing "recorded timing" I got the problem with the video playing slightly faster than the audio (hugely frustrating).
If I recorded the presentation by just letting it play through my preset builds & transitions, then exported an .mov based on "recorded timing" it was interesting. The total run time was now correct, the slide transitions occurred at the correct time but each slide's individual events/builds played slightly sped up and then there were pauses where the the movie essentially let the audio catch up before the next slide. So overall the audio being out of sync wasn't as bad. It was obviously more noticeable the longer the slide was. Still not a usable end-product.
Finally, I went through and changed my assigned build/action times to on-click events rather than assigned delays. Then I "recorded" the presentation and manually queued each event in sync with the audio. Then I exported a .mov (again based on "recorded timing"). This exported the proper movie, with the entire run-time length, and individual events were kept in sync with the audio.
sigh... this whole export issue created a lot more work that it was supposed to be. hopefully this saves someone else some time!

Bizzare export issue

Here is a very weird export issue. Windows XP.
Project is set at h264 1920x1080 mono audio 29.97 fps
I have 30 shots that make up the sequence. Each shot is exactly 90 frames. I exported each sequence at h264 1920x1080 with one channel of audio. The first shot exports just fine and is 5 MB. The second shot exports at 10 MB. The third is 15 MB, the tenth shot is 50MB. But the picture is still 90 frames for each shot. BUT, when I export without audio each exported file is just 5 MB. If I look at the properties of each clip the duration of the video and audio is just 90 frames. If I open one of these clips in QuickTime Pro and re-export it as source then the files size goes back to 5 MB; same video, same audio yet with the correct file size.
Anyone seen this before?
Is there a setting that could be incorrect?
-cablet

Weird, man. Not sure what might cause that.

Crystal JRC PDF Export Issue

We are experiencing a PDF export issue with Crystal JRC version 12.2.202. The PDF report shows 1 of 3 pages but ONLY the first page is generated. When this occurs, ALL other users that are exporting to PDF experience the same issue with any multiple page report. I can't find any errors in the log that would indicate what the problem is. To resolve the issue, I have to recycle the WebLogic application server that hosts the JRC, which would indicate something gets "locked" in memory and gets cleared when the app server is bounced.
Any ideas on how to resolve this ?

Hi Ted,
Thanks for the response!
Though, the mentioned Sun JVM Bug explains the root-cause, the Bug status also state that it is not fixed yet.
Also, we are reluctant to change the JVM Option to -Xint due to unknown impacts on JVM optimizations.
Is there a patch released for CrystalReports to deal with this behavior? We are using CRJ runtime 11.5.7.620 and seeking for a patch on this version.
Thanks.

PP CS5.5 FLV To MP4 Export Issues / Problems

I just upgraded from Production Premium CS5 to CS5.5. I do a fair amount of converting/exporting of imported FLV files (downloaded from internet news sites) to H.264/AAC w/ MP4 wrappers using Premiere Pro (PP) and Adobe Media Encoder (AME). My equipment is a 1+ yr. old HP Win 7 Pro w/ an Intel i970 Quadcore, 12 Gb RAM and MSI nVidia GTX 470 GPU. I have never experienced any queue or export issues w/ CS5 (at least that I noticed), but I am experiencing noticeably degraded queue export and direct export problems with these files in CS5.5.
Description: (1) The queue export times for the exact same imported FLV clip(s) using the exact same sequence settings and H.264/MP4 export settings are noticeably slower in CS5.5 (sometimes 2x, depending on the export settings, e.g. using maximum render quality) than in CS5; (2) My MSI Afterburner GPU monitoring software indicates 5-10% GPU usage during queue/export in CS5, while indicating 0% GPU usage (flatline) in CS5.5; and (3) When I attempt to direct export these files using CS5.5 I get the following error message: "The source and output audio channels are not compatible or a conversion does not exist."
I suspect that it may have something to do with "conforming" anomalies when the FLV file is imported into PP, but I would put that squarely in the category of rank speculation on my part.
Has anyone experienced the same or similar problems or have any insight into what may be the problem(s)? Of course, thanks for any help/insight you can provide.
Jim

What do you mean by a better routine?
A better compression routine than H.264.
Is the quality better than H.264?
Yes.
Does this use an MOV wrapper?
Yes.
Also, would it import correctly into PPro?
Yes.
we would import files into PPro exported out of FCP and would get a red pixelated glitch during preview and export. Does this codec solve this problem as well if it is an MOV wrapper?
I don't know anything about FCP.
Sorry for all the questions, just want to get things right before diving into a new codec.
It's harmless, and free.
Download it and run some tests.

Simple flash export issue

hello
I'm trying to export a flash video using Adobe media encoder from Premier Pro, but when I do I get this error " there are no clips to build".
I have another file that I am able to export and it does not have this problem.
They are Windows Media files and play in Premier fine. I am using Premier Pro CS3.
Lastly, I'm not a video expert but I really need to get these up on the web for work, there is a lot of pressure and I need to get it done.
Regards,
Tom

fixed the exporting issue.

Exporting ISSUES! Help

I am a relatively new user to lightroom. I haven't had any exporting issues until today. I am attempting to export a photo/photos to a specific folder with a custom name. When I do this it exports the WHOLE library and NOT the edited photo. What am I doing wrong??

Lightroom usually exports all images that are highlighted. If you only want to export one image then make sure it is the only image that is highlighted.

Keynote export options using Quicktime and iDVD

I am not happy with the output of HD Keynotes exported to iDVD...they work well with triggering the events with a click but the fonts look blocky. There is no way to upgrade the export settings to improve the quality.
I'm trying to squeeze as much out of Keynote as possible... and it seems I'm hitting a few problems.
Exporting the same Keynote to QT gets the clarity I want...because I can select the higher settings...and I can even "click" to trigger the events in QT Pro on my MBP... but as soon as I burn it in iDVD the clicks fail.
I am hoping to combine the clickability of the export to iDVD movie with the quality of the export to QT movie.
And I am soooo close.... I have discovered that the "clickability" seems to be controlled by a layer in the file called a Presentation Pause Track (found when I look at the movie properties).
Have you come across this before?
My plan was to extract the track and then add it to the hi res QT movie!!! I burnt the resulting QT to iDVD and the clicks were there!!! But the were all out of sync!
I discovered the Presentation Pause Track is a different length than the QT export... and even when I've subsequently added the PPtrack using "add to selection and scale" it is still out of whack!
Your help, guidance, commiserations would be appreciated...
Surely there is a way to have my HD Quicktime cake and eat it too!

Cheers Brian
I'm green with envy re the 8 core Mac Pro!
To add to the info: I'm trying to find out how you can export to QT and iDVD and get a 2 movies of the same length... which should allow me to copy the pause track over and not lose sync with the clicks.
My latest test involves a 2 page Keynote (HD res) and the resulting QT export gave me a movie of 43 seconds while the iDVD export came out 57 seconds...
That's with the default settings for slide and build duration of 5 and 2 sec. (could that represent 2 pages of 5 + 2 sec?)
iDVD lets you alter these settings but to a minimum of 1 sec for each... QT export doesn't let you change these except for a self playing movie... so I'm now testing a self paced QT set at 1 and 1 sec and an iDVD set to 1 and 1 and see what happens...
Do you think I'm on the right track or am I wasting my time?
At least 8 cores might help reach theat conclusion a little faster!!

Importing a Keynote export

I put a file from an keynote export 1024x768 into the timeline. FCP tells me to use clip settings, Along with this an audio file that in keynote repeated twice. The audio file I had to put in twice to equal length of visual clip. I say yes. The problem is when I export as a quicktime movie there is not picture and audio only runs for about 15secs. The movie should be 5min. What should I set movie for. I used default for quicktime using DVCpro NTSC. Should I change to H264?
I am trying to put this movie online as a streamed file video/audio together as one file.

1024x768 is not a standard production format used anywhere in the video industry.
NTSC is 720x486.
Redo your Keynote to reflect that or use one of the HD pixel dimensions such as 1280x720 or 1920x 1080. Yes, you will probably have to rebuild the Keynote slides. Dont forget to take safe area constraints into account if this is going to be shown on a TV or projection system.
Do not, under any circumstances use the H264 codec to edit with.

Exporting issues after 4.2 upgrade

Has anyone else experienced exporting issues after installing the 4.2 upgrade? It used to be a breeze but now I keep getting the message that a destination folder has not been specified even though I've done that. Any feedback would be greatly appreciated! Thank you.

Are you using an Export preset, or setting the Export up manually each time?

Reporting Export Issue from Taleo

Can anyone help? We have a work around for the Exporting Issues into Excel 2010 regarding figures and dates only reading as text, however, a new issue has arisen. In one field we have Aggregated Agencies assigned to any particular Job Code. In the legacy reports, every agency name exported into one cell in Excel, now they export into individual rows, this causes a report to be too long and there is no way to amalgamate them into one cell. Has anyone found a workaround for this?

is there someway that it was reformatted by the Iomega drive being daisy chained to it?
No. That is not possible -anyway, reformatting erases everything on a drive.
You would have noticed that first.
You can download the [NTFS-3G driver|http://macntfs-3g.blogspot.com> which will let you read, write and even reformat the clients drive as NTFS on the Mac. All reasonably modern Windows PCs work with this disc format and you won't run into the file size limitations associated with FAT formatted drives.

Using 128bit key Blowfish and any export issues

Hi,
I want to use blowfish (symmetric key algorithm) in my product and which will be shipped outside US. Reading Sun's documentation I am bit confused and I am not sure if the jce package is going to be available outside the US.
Has anyone used the default available symmetric key algorithms in the JCE package (javax.crypto.*) and faced any export control issues ?
Please let me know.
Thanks
RT
Here is a sample code
String ks = "123456789123456";
kb = ks.getBytes();
SecretKeySpec key = new SecretKeySpec(kb,"blowfish");
Cipher cipher = Cipher.getInstance("blowfish");
// Initialisation of cipher object for Encryption.
cipher.init(Cipher.ENCRYPT_MODE, key);

1. the issue is rather an import issue for some countries, than an export issue for US as far as you use jre>=1.4 .
you can read the
'Downloading the "Unlimited Strength" Jurisdiction Policy Files'
section of
http://java.sun.com/products/jce/javase.html
2. The restricted (defualt) shipped version already covers Blowfish if you mind that.
3. I use Blowfish with restricted (default) version of JCE in applications deployed in europe and have not heard of customer complaining sofar: they are supposed to use webstart or jre1.5.

Keynote 6.0.1 pdf export issues

When I "export to PDF", it seems that any style change (font family, weight, style etc) within a paragraph in a text box causes all the text after the style change to disappear in the pdf export.
Example:
[begin text box]
Lorem ipsum dolor sit amet, consectetur adipisicing elit.
Sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
[end text box]
In the export, it would say:
[begin text box]
Lorem ipsum
Sed do eiusmod tempor
[end text box]
Any idea why this is happening and how to fix it?

I have the exactly the same issue on a brand new MacBook Pro running 10.9.1 (2.6 GHz / i5) and Keynote 6.0.1 (1486). It's beyond irritating.
Have you found a work around?

Keynote export and issues with iMovie import

I told my PC workers I could do a movie for my job in 1 day. They said no way. And I could easily have done that BUT my MAC is FUBAR on file import from keynote to imovie...
I have Keynote 08, imovie 08 and QT 7.6.4 and did a simple slide show in Keynote. I tried to export to mp4, H264, and jpeg into imovie and strangely enough....it occasionally works. Many times I cannot select the files to import because they are grayed out. I have tried many things and again it sometimes lets me import. However, after import I get the clips in the event, and they seem fine. But when I drag them into the project they do not play..they just show a frame or they default to the last clip of video and then skip (in the proper time) to the next video. It is like they are there but the video cannot be resolved. The keynote is just text with build in and out effects and simple transitions.
If I go to Jpeg 2000 or DV (notDVCPAL) they imported OK but were very jagged and severe loss of font quality.
I do not expect this in MAC products. I cannot understand why keynote has a menu setup to export to everything but iMovie....
HELP!

To be clear, the imported video seems to run in the event area. I drag it into the project and it LOOKS like it is OK. And if I drag the cursor over the play area it all appears OK. However, if I hit "play" by itself, as the movie plays it goes fine until it hits the imported keynote section, and here you see the very first frame..and that frame only or nothing....until the next raw video clip (which plays fine).

Keynote exported to Powerpoint issues

I downloaded a Powerpoint template for a Jeopardy game into Keynote and entered my info for the game. Translated back to powerpoint and sent to a couple friends as a test. It opens but has a malicious file warning. What's going on here?

theres one here for Keynote 08:
http://www.keynoteuser.com/freebies/

Keynote Exporting Issues

Similar Messages

Maybe you are looking for