Keynote freezes when right click on mouse. why?

When using keynote, numbers, etc. and I right click my mouse to get the secondary menu, the spinning beach ball appears and the app freezes and requires a Forced Shut Down.  How can this be fixed?
OX 10.8.3

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Similar Messages

  • When i go to google, then search my school, mozilla freezes when i click the link. why?

    I made a new user for my school work. I signed on. started mozilla firefox. went to google. searched for the itt tech student portal and when i clicked the link, it froze. the loading circle on the tab continued to spin but my mouse pointer stays the arrows to move the vertical border. <-> like that. why is it doing this?

    Hello,
    Have you tried [[Font size and zoom - increase the size of web pages|Firefox's zoom feature]]? This will help increase the size of web pages.
    * To make things bigger, press '''Ctrl''' and '''&#43''' at the same time.
    * To make things smaller, press '''Ctrl''' and '''-''' at the same time.
    * To reset the size back to normal, press '''Ctrl''' and '''0''' at the same time.
    You can also use the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. add-on to change the default zoom level for all websites at once. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
    '''Using NoSquint:'''
    #After installing NoSquint, make sure you have the Add-on Bar displayed:
    #*Right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
    #Click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
    #*You can experiment with sizes larger than 125%, but it's not recommended that you go higher than 150% unless you have a large high-resolution monitor.
    If there are particular sites that still present a problem, feel free to post their URLs.
    Please let us know if this helped you!
    Thank you.

  • Dock in 10.5.2 freezes when right-clicked

    Here's the problem... when I do a right-click (or a ctrl+click) on the Dock, it freezes until I click a status bar item (for example the Spotlight icon).
    Does someone have the same issue?
    Sorry for the bad english. Hope you understand.

    I just started having the same problem.
    When I right-click on a Dock icon, I get the context menu but am unable to left-click anything within it. Then I'll try clicking out of Dock by left-clicking in another application or even on the desktop itself, but my context menu remains- frozen for posterity.
    The only way I have found to make the context menu go away has been to activate Spotlight (either by left clicking the icon or keyboard shortcut) or right-click anywhere else within Finder (desktop, Finder window, disk drive icon).
    I miss my right clicking love. Anyone have an idea just what is going on? I first noticed this on Wednesday the 19th. Thanks.

  • Timeline Freezing when right Click

    Hi,
    I was working on a simple project on Premiere CS4 and it included 3 movie clips and audio. Everytime I right click a movie clip on the timeline attempting to copy and paste the whole program would freeze on me. Luckily I saved the project prior to doing so, but what could be causing this issue. I'm currently running it on Windows 7, 64bit, 6GB RAM. Please help.
    Thanks

    It could be one of several issues, or a combo of several. If you can give us much more info, someone might be able to spot an issue. This ARTICLE will give you tips on the types of info that will be so very useful, plus tell you how to gather some of it.
    Good luck,
    Hunt

  • When i use view as list in finder and open a folder with many files i cant right click with mouse without selecting or highlighting a file....i just want to right click to paste an item or create a new folder...what can i do?

    When i use view as list in finder and open a folder with many files i cant right click with mouse without selecting or highlighting a file....i just want to right click to paste an item or create a new folder...what can i do?

    Thx for that im gonna try it....but is there a way to do it without using toolbar or cmd-c...? i mean using only the mouse?why does it have to highlight the file even though i click a bit next to it....?using icon view i can right click next to the folder and i wont have a problem but with list view that i prefer using it will highlight the whole row.....and i dont find free space to right click cause i got many files

  • Now that I've upgraded to Lion, about 50% of the time when I click the mouse it acts as if I've right clicked.  How do I get back to the way it was?!

    I am working on two macbooks and an imac.  I upgraded all the software last weekend and am now running all three computers on Lion.  Over the last week, about 50% of the time when I click the mouse (whether it be the "pad" mouse on the macbooks or the standard mouse on my imac) it acts as thought I've right-clicked.  How do I stop this insanity?!  I want my old no-right-click mouses back!
    Thank you for any guidance!
    Jennifer

    Try this,
         Go to to the Trackpad System Preference and look at the Point and Click tab.  
         Uncheck the box that says "Tap to Click"
    I found my track pad to be way too sensitive and I was finding myself in web pages I did not choose to go to.  Unchecking that box will make it so you have to press the track pad to make it click something as opposed to just tapping it.  It is more effort but also less sensitive to random taps.
    Jay

  • Why does the Right-click - "t" delete a bookmark on the bookmark toolbar, when Right-click - "t" opens a new tab elsewhere. The bookmark toolbar use Right-click - "w" to open in a new tab. Please change this to "t" to...

    Why does the Right-click -> "t" delete a bookmark on the bookmark toolbar, when Right-click -> "t" opens a new tab elsewhere in Firefox. The bookmark toolbar use Right-click -> "w" to open in a new tab. Please change this to "t" to... I keep deleting all my bookmark because you don't make the commands consistent!

    If you have accidentally removed bookmarks then use "Organize > Undo" in the bookmarks manager (Bookmarks > Organize Bookmarks) to get them back.<br />
    The Organize button is the first of the three buttons on the toolbar in the Library (Bookmarks Manager).<br />
    That only works if you haven't closed Firefox.
    [https://bugzilla.mozilla.org/show_bug.cgi?id=301888 Bug 301888] – Bookmarks cut instead of opened in new tab from Bookmarks Toolbar Folder
    (please do not comment in bug reports; you can vote instead)

  • Why, when right click on some link the options "OpenLink in New Tab" and "Open Link in New Window" are exchanged?

    Why, when right click on some link the options "OpenLink in New Tab" and "Open Link in New Window" are exchanged?

    Dear friend, the problem is that there is exchange of something very useful from users an this break them habits! I'm not interested of forced using of tools! Of course it's good that there is a tool to solve my problem, but this action make me unhappy.
    last words - this is the way of losing users.

  • Why does "Link Media" behave differently when used as a keyboard shortcut vs when right clicked???

    Not sure whether anyone else is encountering this, but the "Link Media" command behaves differently when right clicked as opposed to when used as a keyboard shortcut.
    When you right click to select that option for an offline file, you get only the corresponding disconnected source media. But when you execute "Link Media" via a keyboard shortcut, PP brings up a huge list of all other offline media. Why does it only do that when you use the keyboard shortcut for "Link Media" but not when you right click "Link Media".
    I'd like to get the Link Media command to behave via the keyboard shortcut the same way it behaves when right clicked. I don't want to have to deal with relinking a hundred other files, but just the single offline file I'm working on.

    Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

  • Firefox 6. When right clicking a tab no drop-down menu appears. Why do I not have the option to pin, unpin, etc.

    I'm using Firefox 6 with all current updates. This is on a desktop pc running Windows XP (Service Pack 3).
    At some previous time I was able to pin tabs - I pinned three. Lately I do not have a drop-down menu when right clicking on a pinned or unpinned tab. The feature is just not there.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Can't Download Images with Right-Click on Mouse

    I can't download images by right-clicking my mouse, like I do on my PC. For example, check out http://en.wikipedia.org/wiki/North_Dakota and look at the images of the flag, state seal and map near the top right corner of the page...
    When I place my cursor over any of these images on either my PC or my MacBook Pro, my cursor changes to a hand, indicating that the images are hyperlinked. If I right-click on an image, I can choose a SAVE AS command on my PC, but nothing happens on my MacBook Pro.
    If I left-click on a linked image, it simply zooms in, rather than taking me to another page. I'm using a small Kensington mouse.
    This could be a Firefox problem. I think I recall downloading some sort of extension that allows you to zoom in on images, and I suspect it's more or less taken over. If so, I'll have to track down the name of the extension and try and zap it.
    But I thought I'd check here first, just to see if other people have this same problem - or if you can suggest alternate strategies for downloading images.
    Thanks.

    Well, I found a novel solution - it's called Safari.
    I'll post on the Firefox forum to figure out why I
    can't download images with it, but it seems to work
    just fine with Apple's native browser. Thanks for all
    the tips.
    I just tried it, but I am using firefox 2.0 beta and I had no problems. Not sure what's going on. Have you tried any other pages or pics besides this one, which I don't think it would matter just wondering.

  • Can no longer send links online by right clicking my mouse or by selecting

    Everyday I share with others images from Facebook (or elsewhere), by right clicking my mouse on the image and being given the option to "E-mail link." For webpages (from my Taskbar) I click on "File" and then "E-mail link." Trying either of these functions now produces nothing - absolutely nothing happens. Also, I just now clicked on "File" to "Print" a copy of this question, and nothing happens when I click on File - no options appear.

    Hello,
    Maybe the problem is a corrupted file in your profile, try create a new profile:
    *[https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles Create a new profile]
    Or try go to your profile and delete the localstore.rdf:
    *[https://support.mozilla.org/en-US/kb/profiles-where-firefox-stores-user-data Profiles]
    Also:
    *[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in safe mode]
    *[https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox]

  • Screen turns white and freezes when I click on a link

    also freezes when I click on the screen or try to use the right slide bar. Also getting firefox is not responding.

    First, make sure that Firefox is set as the default browser. Ref: [[How to make web links open in Firefox by default]] and [[Setting Firefox as the default browser does not work]]. If links in Outlook Express that should open Firefox freeze the entire computer, you could try temporarily setting Internet Explorer (or another browser) as the default (see http://kb.mozillazine.org/Default_browser#Using_Set_Program_Access_and_Defaults for one way to do that).
    If clicking links in Outlook Express still freezes the computer, you should seek help in a Windows XP forum or an Outlook Express forum ... for example, I found these with a google search:
    *http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/outlook-express-6-causing-computer-to-freeze/75fb3e15-0934-4fb9-888b-3d82d6c7ae10
    *http://www.windowsbbs.com/microsoft-mail-outlook-outlook-express-windows-mail/88467-can-not-open-links-e-mail.html

  • How to click, when "right-click dominant" is turned on?

    My sister is on a 17 hour train ride now with her new macbook with Leopard. She doesn't have a mouse/wacom tablet with her now. Without knowing the implications fully, she went into the mouse settings, and turned on "right-click dominant". Her computer only has one click button, which now brings up the mini-menu that comes up with a right-click. Control-click does the same thing. She is stuck. She can't get back into the preferences to unclick the setting, because she can't click.
    Is there a way?? How to click, when "right-click dominant" is turned on?

    I am not familiar with the term "right-click dominant". The mouse section of the System Preferences has a "primary mouse button left/right" setting, but that affects the mouse, not the track pad. I would try all the modifier keys (and combination of) I can think of to see if one switches the track pad click. If that fails, a restart (press the power button and return) might straighten it out.

  • Need when right click

    Hi friends,
    my requirement is like this.
       i have  notification number. when right click on that  i need to show select ,move ..
    any body have answer pls let me know
    it's urgent...
    ex :in edit right clik u will get select,move.
    same i need when i have notification number when right click  i have to show move and select

    Hi,
    Context Menus
    The user interface of a screen is defined by a GUI status, which you define in the Menu Painter and assign the type Dialog status. For each dialog status, the system
    automatically creates a standard context menu, which the user can display by clicking the righthand mouse button on the screen (or choosing Shift+F10). The standard context menu contains all of the function keys to which functions are assigned. It therefore makes it easy to access any function code that is available using the keyboard, since normally only the most important are assigned to the application toolbar.
    However, as well as the standard context menu, you can define context-specific menus for any of the following screen elements:
      Input/output fields
      Text fields
      Table controls
      Group boxes
      Subscreens
    When you select one of these elements using the right-hand mouse button, you can create a dynamic context menu in the ABAP program. This may contain any functions, and is not
    restricted to function keys. You cannot assign context menus to pushbuttons, checkboxes, or radio buttons. However, you can assign unique function codes to them instead.
    Example
    The following example shows some of the technical possibilities for creating context menus, but
    does not necessarily observe all of the style guidelines.
    REPORT demo_dynpro_context_menu.
    DATA: field1 TYPE i VALUE 10,
    field2 TYPE p DECIMALS 4.
    DATA: prog TYPE sy-repid,
    flag(1) TYPE c VALUE 'X'.
    DATA: ok_code TYPE sy-ucomm,
    save_ok TYPE sy-ucomm.
    prog = sy-repid.
    CALL SCREEN 100.
    MODULE status_0100 OUTPUT.
    SET TITLEBAR 'TIT100'.
    IF flag = 'X'.
    SET PF-STATUS 'SCREEN_100' EXCLUDING 'REVEAL'.
    ELSEIF flag = ' '.
    SET PF-STATUS 'SCREEN_100' EXCLUDING 'HIDE'.
    ENDIF.
    LOOP AT SCREEN.
    IF screen-group1 = 'MOD'.
    IF flag = 'X'.
    screen-active = '1'.
    ELSEIF flag = ' '.
    screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
    ELSEIF screen-name = 'TEXT_IN_FRAME'.
    IF flag = 'X'.
    screen-active = '0'.
    ELSEIF flag = ' '.
    screen-active = '1'.
    ENDIF.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ENDMODULE.
    MODULE cancel INPUT.
    LEAVE PROGRAM.
    ENDMODULE.
    MODULE user_command_0100.
    save_ok = ok_code.
    CLEAR ok_code.
    CASE save_ok.
    WHEN 'HIDE'.
    flag = ' '.
    WHEN 'REVEAL'.
    flag = 'X'.
    WHEN 'SQUARE'.
    field2 = field1 ** 2.
    WHEN 'CUBE'.
    field2 = field1 ** 3.
    WHEN 'SQUAREROOT'.
    field2 = field1 ** ( 1 / 2 ).
    WHEN 'CUBICROOT'.
    field2 = field1 ** ( 1 / 3 ).
    ENDCASE.
    ENDMODULE.
    Callback-Routines
    FORM on_ctmenu_text USING l_menu TYPE REF TO cl_ctmenu.
    CALL METHOD:l_menu->load_gui_status
    EXPORTING program = prog
    status = 'CONTEXT_MENU_1'
    menu = l_menu.
    ENDFORM.
    FORM on_ctmenu_frame USING l_menu TYPE REF TO cl_ctmenu.
    CALL METHOD:l_menu->load_gui_status
    EXPORTING program = prog
    status = 'CONTEXT_MENU_2'
    menu = l_menu,
    l_menu->load_gui_status
    EXPORTING program = prog
    status = 'CONTEXT_MENU_1'
    menu = l_menu,
    l_menu->set_default_function
    EXPORTING fcode = 'HIDE'.
    ENDFORM.
    FORM on_ctmenu_reveal USING l_menu TYPE REF TO cl_ctmenu.
    CALL METHOD:l_menu->load_gui_status
    EXPORTING program = prog
    status = 'CONTEXT_MENU_3'
    menu = l_menu,
    l_menu->load_gui_status
    EXPORTING program = prog
    status = 'CONTEXT_MENU_1'
    menu = l_menu,
    l_menu->set_default_function
    EXPORTING fcode = 'REVEAL'.
    ENDFORM.
    FORM on_ctmenu_input USING l_menu TYPE REF TO cl_ctmenu.
    DATA calculate_menu TYPE REF TO cl_ctmenu.
    CREATE OBJECT calculate_menu.
    CALL METHOD: calculate_menu->add_function
    EXPORTING fcode = 'SQUARE'
    text = text-001,
    calculate_menu->add_function
    EXPORTING fcode = 'CUBE'
    text = text-002,
    calculate_menu->add_function
    EXPORTING fcode = 'SQUAREROOT'
    text = text-003,
    calculate_menu->add_function
    EXPORTING fcode = 'CUBICROOT'
    text = text-004,
    l_menu->add_submenu
    EXPORTING menu = calculate_menu
    text = text-005.
    ENDFORM.
    Regards,
    Bhaskar

Maybe you are looking for

  • How to write a method without knowing how many parameters passed in?

    hi there, i m writing a method which is to find out the max value of a set of values, e.g.    int max(var1, var2, var3, var4) {       here is the code to find the max value, and return it; ......in these case, there are 4 parameters, but what i m try

  • How to edit VIP list in Mail

    Can I edit my list of VIP contacts?  I'd like to make the group smaller.

  • GIF comes out strangely pixelated with noise, never seen this before!

    Everytime I export my animated GIF in flash it comes out in this weird pixelated way. Instead of everything being normally pixelated where they are just not as sharp, they come out with what looks like noise speckles all over them. The kind of noise

  • Differnce between LP and SP

    This is a basic question, but what is the difference between LP shooting and SP. Thanks

  • EIGRP- Equal Cost Paths Selection

    Hello, This might be a simple question; using EIGRP and having 2 equal cost paths to the destination; how does the router/L3 switch route select the path from those two equal cost paths? Is there a way to force one path over anthoer? Thanks in advanc