Keynote hyperlink issue

Having issues when using hyperlink function to link to another keynote file. When hyperlink is clicked, the linked file shows up for less than a second, then black screen is seen for approx 6 seconds. After that both files are open on the screen and keynote is no longer in play mode. Have never had this issue prior to updating to OSX.Kind of a bummer when giving a long presentation having to go mess with keynote 30 times instead of just clicking on the hyperllink....

Hi,
I've the same problem since 5.1 keynote. I needed to downgrade iWork to get back the full functionality.
Apple, is there any bugfix? We wait for it!
Andreas

Similar Messages

Keynote hyperlinks don't work after exporting to html

I'm working with Keynote in iWorks '08 on an iMac running OS 10.5.2. My hyperlinks (graphic and text) work perfectly running Keynote as a slide presentation, but not when I export it to an html format. What am I doing wrong here?
Thanks for any help you can provide.
Jeff
PS: The hyperlinks do work after exporting in flash or pdf format, but our webmaster says I can't use those formats due to compliance issues.

I noticed this as well. What I realized is that Keynote seems to just export the slide as a .jpg with a an .html file referencing the .jpg image. So in essence it is not creating an .html file of the slides contents but rather a reference to a picture of the slide. I haven't tried but maybe "send to" iweb and then "publishing to folder" will give you what you need. Not sure.

Can keynote hyperlink to another program

I'd like to use keynote to hyperlink to another program. According to the inspector I can only link to a quicktime movie, webpage, or another keynote file!
Any ideas?

Dear Tulse,
Thanks for your reply. I don't think it's a matter of security, this isn't anything that involves networking or sensitive data- all I wanted Keynote to do is to open up, say, a Word or an AppleWorks/Inspiration file which could then be used to brainstorm > save > then back to the presentation.
regards,
There are probably good security-related reasons why
Keynote doesn't do this. I'm also not clear what you
would want Keynote to do with the launched
application, since it can't actually communicate with
it in any fashion, nor would it be easy for the
launched app to return to the presentation when it
was finished with whatever it was doing.
With all this said, I think it would be hugely
beneficial if Keynote could run AppleScripts when an
object was clicked -- then it would much like
HyperCard, and one could launch apps and communicate
with them very easily. The security issues would
still apply (for that matter, there'd be more of a
risk), but I'm sure there would be a way around this
issue.
PowerMac G5
Mac OS X (10.4.4)

Hyperlink issue in Smartform PDF

Hi All,
I am facing below issue with Smartform after it converted to PDF. The PDF file has below link
(http://www.vocakiri.co.uk/_assets/media/StandardTC3_(including_REG_31_Requirements).pdf) in footer window.
But when i am selecting the hyperlink it is getting truncated as "http://www.vocakiri.co.uk/_assets/media/StandardTC3_" .it opens window with truncated
web address which leads to error.
could you please let me know what is the problem or is there any note need to be applied.
Thanks and Regards,
Prasanna B

Hi Prasanna B,
See thread http://scn.sap.com/thread/1819587.
You can try using the callback method described in the following Notes:
622718 - SF Web Forms: Callback for the URL format
707931 - Web Forms: Incorrect URL address with the HTML output
You can get a different title of the link by using a kind of user exit for the URL processing, which is described in Note 622718.
You must create your own function module with the following interface:
*" CHANGING
*" REFERENCE(DATA) TYPE TTXCTOKEN
Data: i_data type STXCTOKEN,
(see note 622718; TTXCTOKEN is an internal table of type STXCTOKEN)
Now when you call the function module of the Smart Form, you should fill the parameter OUTPUT_OPTIONS-URLCALL with the name of the new function module. As a result your function module is called, when the URL is processed by the Smart Forms composer.
This method allows you to use a shorter alias for a longer URL link.
Regards,
Aidan

Image hyperlink issues in PDF creation using Acrobat 9.0

Hi All,
I am using Acrobat 9.0 Professional for creating a PDF of a web site hosted on my local IIS server. All the web pages contain:
           1. A single large image and some description text.
           2. Few hyperlinks mapped to the various areas/locations of the image. The hyperlink is visible when user moves the mouse cursor to that specific area/location on the image.
These hyperlinks work correctly when the web page is viewed in any browser but when the web site is converted to PDF, we observed the following problems with the image hyperlinks:
     1. The hyperlink area (rectangular) on the image is shifted from its original position.
     2. The hyperlink area (rectangular) on the image grows bigger than its original size.
(The original position and size here means the position and size of the hyperlink as on the web page respectively).
Surprisingly these issues do not occur if a PDF is generated of the same web site using Acrobat 8.1.0 Professional.
I searched the Adobe website for any service pack/updates that could resolve this issue in Acrobat 9.0 Professional but could not find any.
I will be really thankful for any help provided.
Regards,
Santosh.

In my case it's with .puz files, which are crossword puzzle files used by sites like the New York Times and read by the application AcrossLite. I went into preferences and tried to change the action for the file type from "Save File" to AcrossLite but it would not take. Set it instead to "Always Ask" and then in the dialogue box selected AcrossLite and "always do this" and it gave an unknown error.
This is FF 4 on a Mac.

Hyperlink issue in PDF

Hi Folks,
I am crashing my head under this issue but no luck.
I had some hyperlinks in my indesign CS5 document which have a shared folder destination for hyperlinks in page items. Now if I tried to jump to destination from Indesign document it directs me at correct folder so far so good but as I export this document to PDF and in PDF if I try to click on the link it directs me at browser and obviously alerted that URL not found.
Is there is some work around to fix this discrepancy or this a bug of Indesign CS5.
Thanks
Mac

Thanks for quick reply,
I've patched my Indesign to latest patch. Hyperlinks destination is in folder itself not prompting to open any file (e.g. \\\\tewaveserver\\source).
while opening in Acrobat, It addes the path PDF file is saved (e.g. /C/productpdf\\tewaveserver\source) where "/C/productpdf" is the path where PDF is saved.
I saw one relative thread to forum and unchecked the option in PDF preferences->internet->Display PDF in browser. though it stoped now browsing link in internet but still not opening respective folder also.
Mac

Hyperlink issues in Converted Project

I've just recently upgraded to RoboHELP Version 8 to get a better results on the the full text search in WebHelp (the output of our choice). The conversion appeared to go great and I've been happily working away on new content.
As our developer is still changing screen names etc in the development cycle of a new product, I have been using variables for all screen names so that I only need to change the value in one place when they come up with yet another U-beaut name for the screen. Quite often I would also insert a hyperlink over the variable to another topic.
Unfortunately, when I had to revisit one of my existing topics I've found that any hyperlink that has been inserted on top of a variable in a table or drop-down seems to have been lost. This means that nearly 75% of my hyperlinking has gone west!
Has anyone else experienced problems in this area? I did try searching to problems with Version 8 which brought to light a couple of other little issues that I'll keep an eye on but couldn't see any queries about variables and hyperlinks.
Regards from sunny Brisbane (Queensland, Australia).

Hi Kathy
Indeed sometimes working with variables can seem pesky!
My initial thought pattern upon reading your issue was that RoboHelp 8 supports formatted variables. This means that your variable may contain a hyperlink. w00t!! Then I had a big ole Homer Simpson style D'OH! moment and smacked myself on the forehead as it occurred to me that if you did that, it would certainly work and preserve the hyperlink but ALL instances of the variable would share the same link destination. And that's likely not the case, eh?
I just tested this action with my version 8 and found that RoboHelp HTML seemed to work fine to place a hyperlink over a variable. I closed the topic and reopened and it left things intact. I closed the project and reopened and it left things intact.
Naturally this causes questions to be begged:
How exactly are you creating the links?
How exactly are you testing to see that the links are failing?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Keynote, hyperlink to hidden slide problem

I'm currently making a keynote that on one picture has a hyperlink to a slide. When the keynote is finished I don't want the presentation to show the slides that my hyperlinks are referring to. But if I try to hide the slide the hyperlink is linked to, the hyperlink is disabled. Suggestions?!
Oliver

Hi,
You could try putting a couple of blank slides or a 'the end' slide immediately after your presentation and stopping the slideshow manually.
Alastair.

Keynote Hyperlinks on Website

When I add hyperlinks to other Keynote pages they work fine in Keynote and on the exported Quicktime movie. However, when I then embed the Quicktime into a web page and upload it, the links are dead on the webpage. Any suggestions?

I believe this is due to a security fix in QuickTime. Some scammers would make a QuickTime movie LOOK like a normal image but, as it "played", it would start opening up browser windows at certain points in the movie. All they'd have to do is create a few malicious sites, have that movie open those sites, and your Windows machine is infected before you even realize it!
So, as a compromise, those links still work in QuickTime player, BUT they don't work when played in the browser anymore.

Hyperlink issue CS6

Hi all,
i need help! hoping someone out there can assist. I am working in CS6 on a PC. I've been creating files with active hyperlinks in Indesign, and then making pdfs from these. Up until yesterday, these were all working fine. Here's what happened yesterday... my company replaced my hard drive completely. Last friday I was having general issues, so they formatted a whole new drive for me and swapped it out yesterday, rebuilding my profiles etc. Now for some reason, none of the links work in ANY of the files I created previously (and there are a LOT)... and when I go into the Indesign files the hyperlinks are showing broken and have basically disappeared in the links panel... I'm not quite sure what has happened, but I know it's something with my machine or settings, because when I copy the items with the links out of another file that someone else created (that works fine) and place them in MY indesign document and then try to create a pdf again, the links mysteriously don't work again. Has anyone seen this happen or have any ideas??? I've tried looking into my preferences but they seem fine. Our IT Dept. does not know anything about the software itself. I would greatly appreciate any assistance. Thank you in advance.

I don't want to sound diplomatic but honestly I have no idea when the fix will be rolled out for this bug.
I know that engineering team is working on it and the bug is under review.
The workaround for now suggested by them over the bug is :-
""The current workaround for the same could be to use the Panel to enter the URL and not the Hyperlink Dialog.That is if we write the URL in the URL field available in the Panel and hit return to apply the URL this problem does not occur.This problem only occurs if we Open the Hyperlink Dialog to apply the URL ""
Would appreciate if you bear a bit longer.

Hyperlink issue in FCKEditor

Hi all,
I have this requirement of creating a framework for an application without the actual contents in the pages. I am using FCKEditor in all regions so that at a later point, we could enter the contents. I do this by creating a Text Area item & displaying it a HTML Standard Editor. The issue now is that hyperlink functionality doesnot work. I believe there is an issue with uploading images. Please let me know if there is a workaround to resolve this at the earliest.
Thanks in advance

Hi Mohammad,
There should be navigation defined for this. Check the get_p method of the attribute where you have hyper link. At the same method you will see the event name for fp_onclick property.
In the event which you got from get_p method there has to be navigation logic written to navigate to other view. See whats happening there which may help you to move forward.
Regards,
Jotsaroop Singh

Keynote hyperlink

I am working on iphone presentation. Some of hyperlinks are broken or not working after export as PDF. why? and how do I fix it?

Thanks Gary
The goal is to create PDF with all working hyperlinks for mobile prototype presentation. Right now, hyperlinks are not working. Can it be fixed with Adobe Acrobat? If so, how?
As an another option, if I purchase the mobile version of keynote, can I open the file from desktop keynote and play presentation in keynote app? Then, would all the hyperlinks work?
Soo

Keynote hyperlink failure in iweb

I have created a flash file in keynote, then exported it to iweb .... all works fine; except for any hyperlinks that were created with the file. These seem to disappear when it gets exported into iweb. The only solution that I've found is to create an invisible box shape over the subject once it's been exported, and then enable that as a hyperlink. However this doesn't cause the arrow to change to a hand, which is what I want.
Any help out there?
Macbook using keynote08 and iweb08.

Duncan, the reason for the Hyperlink not appearing as such is beyond me, but the solution would be easy.
Just make a "click me to continue" notice somewhere on the page.
Many Flash intro's have these so why not yours?
Harry

Export to .PDF, hyperlinks issue

Hello,
I've been working with Crystal Reports 2008, and so far it all seems to be going well. There is only one issue that I've come across, and I was hoping for some direction.
For some reason, when I export my form to .PDF, all hyperlinks are removed... I've found that I can export to RTF, then to .PDF, but this sometimes causes some formatting issues.
Is there any way for crystal reports to keep their hyperlinks when exporting to .PDF?
- Scott

Hi, thanks for your reply,
You know, I've never tried it just out of Crystal Reports 2008 until now. I ran the report, then in the preview tab, I clicked on the field that had the hyperlink formula in it...
Clicking it just selected the textbox. I tried the same thing in CR2008 Viewer, with no success. The odd thing is that, if I export the report to rtf, excel, word, html, etc. the hyperlinks are there. It's just not there in the viewer, or in the exported .PDF.
I'll explain how I did the hyperlink, and hopefully you can tell me whether I'm doing something wrong.
I have a field in our database with the full path to the document that I want to link to. The path is similar to
xx.x.xx.xx\subfolder\subfolder\filename.PDF. This path will work so long as the report is being viewed on a PC connected to our local network (which it is).
Then, in my query, I select the path as one of the database fields. If I just put the field into a text-box, the value is printed correctly, so my query is grabbing the correct path.
Then, on the text-field that I want, I right click, select 'Format Text...' and select the 'Hyperlink' tab. Then I set the hyperlink type to 'A file', and under hyperlink information, I select the formula button. I then bind the formula to the field with the path in it, save changes and retrun to my form.
Within CR2008, it doesn't look like there are any hyperlinks, and clicking the field just selects the text. If I export it to .rtf, excel, word, html, etc. the link is there, and it works fine. As I've said, it's just the CR2008 viewer and exported .PDF files where the hyperlink doesn't appear.
Now, on a whim, I decided to just type the path into the 'file path:' field in the hyperlink tab. Doing this manually allows the link to be clicked in CR2008, but I still can't get the exported .PDF file to recognize the hyperlink. Even if setting the static path allowed my links to be maintained in an exported .PDF, I need the Path to be set based upon the field in our database.
So, that's where I am now. If you can see something I've done wrong, or something that I haven't tried, please let me know. This is the only thing that I've come across that is causing me any trouble so far. I would appreciate any help that anyone could offer, Thanks.
-Scott

Hyperlink issues when merging RPTs into 1 RPT

Hi All,
Requirement:
We have a requirement such that we will have to combine 2 or more RPTs into 1 RPT such that the output of the combined RPT looks like output of the first individual RPT and then the output of second individual RPT.
Our ActionPlan:
We are planning to have the individual RPTs as subreports in the Detail section of the main RPT. There is a query in the main RPT which will return us rows equal to the number of reports to be merged in the main report. The main query returns a unique ExecutionId for each individual report and we are using a GroupExpert on this ExecutionId so that the multiple subreports, present in different DetailSection of the main RPT gets executed and we get the desired result.
We have different PageHeaders corresponding to individual RPTs. Also these PageHeaders have text controls which require a hyperlink to be done to the subreports.
Issues Faced:
1) Since the Group is on ExecutionId ,when we make a hyperlink(To another report object) from the PageHeader to the Details section subreport then it opens a new tab which is actually containing the entire data for that particular ExecutionId. Can I avoid the opening of the Hyperlink in the new tab?
2) The subreport can be clicked and viewed as a new tab in the Preview.This is a default behaviour of Crystal Reports. Can the opening of subreports in a new tab be avoided and they should not prompt for any Hand or something so that the user never clicks it?
Thanking you all in anticipation....
Regards.
Ajit.

Hi All,
Thanks Stratos for the reply and my apologies for replying late to the thread (I went on a vacation and sorry for that).
My question was 'Can i disable the click of subreports when the report is previewed?'; Ur soution was that 'I should try to overlay the subreport with a transparent rectangle'. But the solution suggested does not serve the purpose. I have a subreport in the Detail section and then I inserted a Box in the Detail section such that the Box spreads over the subreport and also checked the property of Extend to Bottom of Section when printing. The Box now comes on top of the subreport in both Design and Preview. But the subreport is still clickable and no success there.
I am using Crystal reports 2008 version.
My first question relating to Hyperlink is still unanswered. I will explain it further to give you my exact requirement from the Designer perspective which would help us in clear understanding of the requirement.
The design of the report looks like
RH             Index Page of the Merged report
PHa           Report Title and the parameters of the report1
PHb           Report Title and the parameters of the report2
GH1          Group1 on the ExecutionIDs (Always suppressed)
Details a           SubReport containing the transactional data of Report1
Details b           SubReport containing the transactional data of Report2
GF1a         Subreport of AccountNames of Report1
GF1c         Subreport of AccountNames of Report2
My 2 issues are :
1) I have to hyperlink a text object in PHa to the subreport present in GF1a. Since I cannot hyperlink a subreport directly, i tried using a dummy text object on top of subreport and then tried to hyperlink it to PHa, it opens as a new tab whereas I want it to navigate and hyperlink in the same report in the same tab like any other hyperlink to another report object.
2) Disable the click of subreport.
Incase i have written something incorrect then please do correct me and help me out.
Thanking all in anticipation.
Regards.
Ajit.

Keynote hyperlink issue

Similar Messages

Maybe you are looking for