Keynote Intel-Mac Problem

I imported swj files into keynote and they have always worked before, but all of a sudden the event itself will play, yet the screen will have be black. On the left hand side where it shows the order of events, everything looks to be in order, yet the events cannot be seen.

If you haven't done so, then re-post this in the iWork forum. This forum is not really the best place for your topic.

Similar Messages

  • Intel Mac problem

    I have just installed the latest Adobe Flash player as a
    group of websites I use said I needed it.
    I am using an Intel Mac OS X 4.10. And have installed Flash
    9.1.45.0.
    Browsers Safari Beta 3, and Firefox 2.0.0.4. Both latest
    versions.
    Tried uninstalling Safari 3 but still the same problem with
    Safari 2.
    I have looked at the support pages here, and followed the
    instructions , I uninstalled Flash, reinstalled it and then
    verified my permissions and rebooted and still these 3 particular
    pages will still not open for me.
    The server for these 3 sites has had a recent upgrade which
    took 10 days and after it was working I used it and it was fine,
    But then yesterday I got this message.
    They are shopping sites. I am disabled so on line shop a lot.
    Do you think the fact they have upgraded their server may
    have something to do with this problem, and I ought to contact the
    sites and ask for Technical Support?
    One of their sites has a club offering magazines and
    discounts and of course I cannot even access that.
    So so frustrating.

    If you haven't done so, then re-post this in the iWork forum. This forum is not really the best place for your topic.

  • Installation problems on Intel Mac. claims PPC

    I'm trying to install the current Flash Player 10.2 on my Macbook 6,1 (Intel Core 2 Duo, 2.26GHz) with 4GB RAM, running OSX 10.6.6
    Browser is Firefox 3.6.13 {Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13}
    I got the installer from http://get.adobe.com/flashplayer/
    The installer puts up a message: "Devices with PowerPC processors are no longer supported"
    How can I convince the installer that this isn't a PPC machine ?  Why might the installer think so ?

    Hi, What browser are you using to try to Uninstall/Install FP vs 10.2? And when you Install 10.1, what browser are you using?
    There is no Flash Player support for a 64bit browser. I have been very busy on the Forum and have not had time to check on the 10.3 beta. Not sure what it refers to. Have you? Just asking as I've seen it mentioned on another thread, but it's from those complaining about 10.2 not working. Why anyone would want a beta Installed unless they are involved in the testing and are Developers I don't know.
    Any beta is a work in progress, so as long as a user is aware of that it's ok with me. Microsoft has their IE9 in beta too, but with an beta one can expect problems.
    Since the 10.2 is not Installing, then I don't think you'd receive any code, do you?
    I'm not as familiar with the Mac, but is it possible to upgrade the OS from a PPC to the edition you have now?
    I'm going to check a couple of things while you let me know on the above browser info. Also any comments would be welcome:-)
    Thanks,
    eidnolb

  • Text-wrap problem ID CS3 on Intel Mac

    I've recently been upgraded to an Intel Mac workstation running Leopard and for the most part, the transition has been smooth.  However, I just noticed today that I cannot get "detect edges" to work on a text wrap around an object with a transparent background in a placed Photoshop file.  The detect edges only works if I have a white background.  I've never had this problem before, so I wonder if it's a result of my new computer.  I use this function of text wrap constantly, and I'm hoping someone knows if this is a known bug and if there is a work around.

    You don´t have to use detect edges feature for extracted PSD-image.... just select a proper Contour Options Type, Alpha Channel for instance.

  • New Intel Mac Mini Start-up Problems

    I've recently purchased a new Intel Mac Mini (my first Mac after switching from a PC). Several times (probably once a day), the mac mini won't start-up.
    I've noticed it happens after I've used iPhoto or iDVD. The mini becomes busy and performance seems to slow. After the software has finished its task, I can exit the application fine and shut down the mini.
    When I then go to boot the mini, the little blue light comes up, but nothing else happens. It's almost as though it's in sleep mode (which it isn't). I've tried different ways to wake it using the keyboard, mouse and start button, but nothing.
    The Mac Mini will only start-up again if it is unplugged from the mains and left for several minutes.
    Has anyone else had this problem? Is there something I'm doing wrong that my lack of Mac knowledge may not be aware of?
    Any help would be appreciated.
    Thanks

    I have been frustrated by the same issue. My (admittedly non-professional) diagnosis is that the problem is related to heat build up. I am able to boot normally only after forcing a hard shut down and waiting for "a while" (5 minutes is not enough, 30 minutes does the trick). Thus my hypothesis that an appropriate cooling down period is needed.
    Any similar thoughts? I'm calling Apple today...

  • Fscommand problem on Intel Mac

    Hello!
    I am new to the forum and have a big problem.
    I am trying to execute an application with fscommand on a
    Intel Mac usin the latest standalone player (9.0.28)
    This is the code:
    fscommand("exec", "myapp.app");
    myapp.app resides in a subfolder called "fscommand"
    This does not work in the projector file created by the
    9.0.28 player. It works in the flash 8 player under rosetta, but
    then I lose to much performance. fscommand works fine on windows in
    all players.
    Can anyone help me with this? Is it a bug, or is it due to a
    undocumented change in the flash player?
    My swf source file is in flash 8 format actionscript 2.0.
    Best Regards
    Rune

    We found r28 was quite different under the hood from older 9
    players,
    but I'm not sure what the work around is using a standard
    projector.
    You can make this work with Mac version of mProjector it adds
    a
    executeApplication call.
    it is documented here
    http://www.screentime.com/software/mprojector/docs/index.html#mSystem
    to use it you just install the mProjector mxp file add the
    call, export
    your swf then convert it with the mProjector builder
    application
    Demo here
    http://www.screentime.com/software/mprojector/demo.html
    John Pattenden
    Screentime Media - Flash Tools since 1997
    http://www.screentime.com

  • Intel Mac Install Problems

    Is anyone else out there running a new Intel Mac with 10.4.8?
    The problem comes when I go to install CF MX 7.2. I tried all the
    configurations possible for developer (stand alone, with JRun, on
    top of J2EE) and it just won't install right. It gets to the part
    where it says 'it installed okay first part, but to finish the
    install check firewall ports, etc. and make sure CF is running.'
    Anyway, I can never get CF to run. It tries to, and can't. The
    annoying part is I have to manually uninstall the crap too each
    time, as the 'uninstaller' gets so far and asks me for my admin
    password (not the CF admin password, RDS password, but the actual
    admin pass for my account). I enter it and it keeps telling me it
    is wrong. So you can't unistall with the unistaller. Funny thing
    though is when I go to just trash the whole app manually the system
    asks for my admin pass and it takes it just fine.
    So, my main question is: Has anyone gotten CF MX 7.2 to
    successfully install and run on an Intel Mac? Or will it only work
    on an older PowerPC? (All my other Macromedia/Adobe stuff is
    running just fine since I upgraded from the PowerPC. It was a
    little slow at first, but I threw a bunch of ram at it. I cannot
    get CF to install at all though...)
    Anyone with advice or insight please respond...
    Thanks.

    http://webmages.com:80/cfmxIntelOSXguide.html
    "WantToProgFlex" <[email protected]> wrote
    in message
    news:eil6o3$d7k$[email protected]..
    > Is anyone else out there running a new Intel Mac with
    10.4.8? The problem
    > comes when I go to install CF MX 7.2. I tried all the
    configurations
    > possible
    > for developer (stand alone, with JRun, on top of J2EE)
    and it just won't
    > install right. It gets to the part where it says 'it
    installed okay first
    > part,
    > but to finish the install check firewall ports, etc. and
    make sure CF is
    > running.' Anyway, I can never get CF to run. It tries
    to, and can't. The
    > annoying part is I have to manually uninstall the crap
    too each time, as
    > the
    > 'uninstaller' gets so far and asks me for my admin
    password (not the CF
    > admin
    > password, RDS password, but the actual admin pass for my
    account). I enter
    > it
    > and it keeps telling me it is wrong. So you can't
    unistall with the
    > unistaller.
    > Funny thing though is when I go to just trash the whole
    app manually the
    > system
    > asks for my admin pass and it takes it just fine.
    >
    > So, my main question is: Has anyone gotten CF MX 7.2 to
    successfully
    > install
    > and run on an Intel Mac? Or will it only work on an
    older PowerPC? (All my
    > other Macromedia/Adobe stuff is running just fine since
    I upgraded from
    > the
    > PowerPC. It was a little slow at first, but I threw a
    bunch of ram at it.
    > I
    > cannot get CF to install at all though...)
    >
    > Anyone with advice or insight please respond...
    >
    > Thanks.
    >

  • Rsync: Problem on Intel Mac

    Hello together,
    I want to use rsync to backup files between my Intel Mac (iMac 20'') and my PPC Mac (G4 450 sawtooth).
    This works except that the ressource forks and other files starting with ._ can not be transfered.
    rsync -aE /sourcpath remotehost:/targetpath/
    I keep getting lots of errors like
    file has vanished: "/path/._filename"
    file has vanished: "/path/._filename"
    file has vanished: "/path/._filename"
    The files are transfered, but the ressourcforks are not.
    How can I solve this?
    Best regards
    Martin
    G4 Sawtooth, iBook G4 800   Mac OS X (10.4)  

    I don't know if this is what is causing your problem, but I have seen these types of errors using 'rsync' on 10.4 where the source and destination are on different volumes, and one volume has ACLs enabled, whereas the other doesn't. Once, while doing an incremental backup, 'rsync' actually went and stripped off every single resource fork in my backup - not just those of files that would have been modified since the previous backup. I didn't bother to keep ACLs enabled long enough to troubleshoot after that.
    Both ACL support, and support in various command line utilities for preserving resource forks or file attributes are features newly introduced in 10.4 - it looks like there still may be some kinks to work out with respect to how they interact...

  • Problems with Safari, Acrobat, Intel Macs, and Life Cycle Form Mgr.

    Here is my problem:
    A Mac user using 10.4.10, with Acrobat Standard Ed v.7.0.9 installed,
    is having to approve purchase forms through Adober Life Cycle Form Manager
    through Safari 2.0.4. When trying to approve the PDF forms, it tells her
    she needs to have Acrobat v.7 installed, and only shows a white page.
    Went back and launched Acrobat 7.0.9, and did the "Detect and Repair"
    setting to verify the Adobe PDFViewer plugin was installed.
    Said it was, checked the Library/Internet Plugins folder and it was.
    Launched Safari, Safari's list of plug-ins does not show it as being installed.
    Trashed the Safari .plist file, relaunched Safari, same thing.
    Read on the Apple site that people were experiencing similar issues,
    Read on Adobe's site that for Intel Macs, should be using v. 8.01.
    Downloaded the 8.01 Acrobat Reader and installed it.
    re-launched Safari, success, it says the plugin, v.8.01 is installed.
    Go back to Adobe Life Cycle Forms Manager, go to view a PDF,
    at 100% screen size, PDF shows correctly. Zoom in on details,
    PDF goes blank, will not show details. Zoom back out,
    PDF goes white page, no info displayed.
    My Questions:
    1. is it an issue with Adobe Life Cycle Forms Manager and Safari on Intel Macs?
    2. Is there a way to get a proper plug in for Safari, so that Acrobat will read the PDFs
    instead of the default Preview?
    thanks in Advance

    bump
    anybody running ALCFM and Acrobat 8 with an Intel Mac,
    are you running into issues with approval of PDF forms?

  • Intel Macs & G5s: Problems when moving projects between them

    An earlier post* suggesting complete compatibility between the latest FCP in a G5 and in an Intel Mac may be in error.
    We are experiencing continuing crashes using our Intel Mac when we work on projects that were originally either imported or partially rendered in the G5.
    It has gotten to the point where we feel we must keep projects completely isolated from each other: Either it is a "G5 project" or it is an "Intel Mac" project. Moving projects back and forth between the two leads to problems such as:
    The Intel Mac does not recognize any renders done in the G5...
    The Intel Mac crashes when rendering 'G5' projects...
    The Intel mac crashes when compressor goes to work to export sequences to mpeg...
    The G5 works fine with Intel Mac-originated material: It is only in the Intel Mac where we have these problems.
    Both systems are up-to-the minute on their OS, security updates, and FCP versions. We are using variously 720p/30 from the JVC GY-100UA and 1080i/30 from the Sony Z1U.
    Our questions are:
    Is anyone else experiencing similar problems moving projects between a G5 and an Intel Mac?
    Is anyone moving projects between the two platforms and experiencing NO problems at all? That information would be just as valuable, and very welcome.
    Apple FCP development team: Is our experience unique or have you had other reports like this? Any idea what could be causing our problems -- and what we can do to fix them?
    * http://discussions.apple.com/thread.jspa?messageID=3604812&#3604812
    Intel MacPro Tower, 3gHz, 8mb   Mac OS X (10.4.8)   Also a G5 Tower, 2x2.5ghz, single core

    Scott,
    Welcome to the discussions!
    I have had no problems moving my G5 projects over to my MP.
    You can not move render files between machines.
    When you changed systems, did you use Migration Assistant to transfer your files over to your new Mac Pro? You might need to install from the disks in order to achieve native Intel performance. See if you installed Final Cut 5.1 on your G5 then it installed the PPC code... if you put that drive into your Mac Pro or used Migration Assistant to move the app over it is still the PPC code... When you install from the installation disk, Installer determines what system you are installing on (PPC or Intel) and that's what it installs. This goes for all of your "Universal Binary" apps...
    In the System Profiler app. under Software/Applications
    Final Cut Pro "kind" should be Universal on your MP.
    The FCP development team do not read these posts, only users do.

  • Mac Mini Intel Keychain problems + Entourage

    This Mac mini is not even a week old and I had to twice reinstall Tiger to get this keychain problem gone and it just keeps comming back like a bad cold.
    Keychain keeps on getting messed up for no good reason and keeps losing my passwords.
    I have deleted the keychain files tryed to repair reinstalled tiger 2 times already and after 3 - 5 days it comes back.
    Is this a new virus or is my Mac mini being hacked or what ???
    Oh and what is up with Office for mac is there a patch to make it work with tiger as it keeps on crashing and several other problems ????

    Well, if your Keychain issues keep coming back, then reinstalling Tiger probably isn't a good idea anymore, as you now know it will not solve them.
    After the re-installs, did you download and install the latest updates (with Software Update) ?
    Also, it would help to know with which application(s) you entered the passwords that your Keychain loses.
    Even though there are a few viruses for Mac OS X, I doubt that you got one, as they aren't very widespread and, as far as I know, do not corrupt Keychains. It doesn't seem very likely that your being hacked either, unless you have specific reasons to consider yourself a target. However enabling Mac OS X's built-in firewall isn't a bad idea if you haven't installed any third-party solution. Just open System Preferences (which can be accessed through your Applications folder, or though the Apple Menu - the blue Apple icon in the Menu Bar, at the top of your screen - beneath "Software Update..." and "Mac OS X Software..."), and open the Sharing pane (Internet & Network section), where you will find a Firewall tab. Once you're there, simply click on "Start" to enable the firewall.
    There have been a few reports of Office:mac crashing on Intel Macs, but they don't seem to occur very often, and the only thing I can think of to fix this is to download the latest update from Microsoft's website ...

  • Mac Mini Intel Wireless Problem

    I just bought an Intel Mac Mini and experienced extremely poor wireless connection to my home network. The signal would start out strong and then fluctuate and become so weak as to not support a connection at all.
    I, of course, consulted the vast world of info (www) and found this is a common problem (particularly with this model). I tried some of the suggested fixes (reorientation, antenna disconnected, etc.), but no dice.
    However, while the case was open I powered-up the Mini and discovered that I had a much more stable connection. Seems maybe the case shielding (even though cutout for the antennai) might be blocking reception.
    Has anyone tried an external antenna (whip) with one of these things? If so, which one(s)?
    I also have a 12" Powerbook (1.33), iMac G5, Mac Mini G4 and various PeeCee laptops that connect to my wireless network anywhere in the house with a good consistent signal.
    Thanks
    12in iMacG5 Mini   Mac OS X (10.4.7)  
    12in iMacG5 Mini   Mac OS X (10.4.7)  

    Thanks for the suggestions DP.
    The settings are the same as for the dozens of other computers that have connected to our wireless, and the mini has been connected with no other computers on the wireless which made no difference (and rightfully shouldn't).
    I've actually solved that issue by removing the case - what I'm really asking about is external anntenas. Or case mods.
    Thanks
    12in iMacG5 Mini   Mac OS X (10.4.7)  

  • PROBLEM WITH FINAL CUT 4 ON INTEL MAC

    tried to install final cut version 4 on an intel macbook pro and it comes up with error message saying AGP card missing. How come my version 3 will run? Any ideas?

    Hi,
    you need to have crossgrade to FCS 5.1 to run it on Intel Mac, but I think is too late to do a crossgrade - the promotion was valid up to 17 or 19 of March.
    Now you can do a "standard" upgrade:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=6C0 4E07A&nplm=MA286Z%2FA
    or an upgrade for Final Cut Express HD:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=6C0 4E172&nplm=MA264Z%2FA
    Marek.

  • Template problem on Intel Mac

    Hi All, I just jumped ship,and have started developing on and working with Mac's, so go easy on me!
    I am trying to use the "Wedding Classic Cover" template (First of three) and when I drag an asset to the "Content Here 1" area on the menu, it will not display, but it will show up in Drop Zone panel. I can still set the start Frame and I can see a preview, but it will not show up in the menu, nor when I simulate. Also, the border (the nice frame "FrameGold2.pox" will not show up, but the preview of it will.
    Anyone have any ideas? Could this be bacause I am working on an Intel Mac and I have the standard DVDSP4 version?

    I am working on an Intel Mac and I have the standard DVDSP4 version?
    Could very well bbe, the non-Universal is not suppossed to be able to run on MacIntels (I am running the Universal Suite on a MacBook Pro with no issues so far, touch wood).

  • White 20 inch intel mac osx install problem

    I'm trying to reinstall OSX Lion onto an older, 2.16 GHZ, 20 inch intel Mac. I had to reinitialize the hard drive before the install. When I try to perform the install it tells me that "Mac OS X cannot be installed on this computer.  The disk was reinitialized using Mac OS Extended (Journaled). I have noticed, however, that when I select the hardrive (not the partition) in Disk Utility that the Volume Format is MS-DOS (FAT).
    Any suggestions or workarounds would be appreciated.
    Gary

    The partition should be GUID and the Hard Drive should be Mac OS Extended (Journaled).
    BTW it's an iMac.

Maybe you are looking for