Keynote is repeatedly asking me to resolve conflicts on the same device (iPad)

Switched on iCloud for keynote on my iPad yesterday. I've been working on a presentation and, possibly after making a change to the presentation on my iPhone, I'm all of a sudden getting a dialog asking me to resolve conflicts every 5 minutes or so. Usually in groups of three about a minute apart.
The message states that the conflicting documents are versions of the iPad presentation, usually a minute apart.

You might want to save the most current version to iTunes, delete the document from keynote, check it's been deleted on all devices and then add it back from your saved copy in iTunes.
I regularly use 'save to iTunes' as a back up while I'm working on documents in iCloud.

Similar Messages

HT5624 My wife and I share the same apple id, we just updated our iphones. When we were asked if we wanted to share the same apple id for icloud we said yes, now our phones can't face time, please help?

My wife and I share the same apple id, we just updated our iphones. When we were asked if we wanted to share the same apple id for icloud we said yes, now our phones can't face time, please help?

Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/

SQL error msg - The DELETE statement conflicted with the SAME TABLE REFERENCE constraint

Executed as user: ****. The DELETE statement
conflicted with the SAME TABLE REFERENCE constraint "FK_PARENT_TASK_REF".
The conflict occurred in database "****", table "****", column
'PARENT_TASK_ID'. [SQLSTATE 23000] (Error 547) The statement has been
terminated. [SQLSTATE 01000] (Error 3621). The step failed.
Does this error msg indicate the whole script failed to execute or was it just a single step/task that failed ?
What does error msg mean ?
Anyway to prevent this error msg and ensure script runs successfully

Hi mdavidh,
This error occurs because the record 'PARENT_TASK_ID' was referenced by 'FK_PARENT_TASK_REF'.
Please refer below codes:
CREATE TABLE MyTable (
ID INT, primary key(ID), -- primary key
ID_Parent INT foreign key(ID_Parent) references MyTable(ID), -- foreign key reference the same table
insert into MyTable(ID,ID_Parent)
values(0,0);
insert into MyTable(ID,ID_Parent)
values(1,0);
insert into MyTable(ID,ID_Parent)
values(2,0);
insert into MyTable(ID,ID_Parent)
values(3,1);
insert into MyTable(ID,ID_Parent)
values(4,3);
insert into MyTable(ID,ID_Parent)
values(5,4);
CREATE TRIGGER MyTrigger
on MyTable
instead of delete
as
set nocount on
update MyTable set ID_Parent = null where ID_Parent in (select ID from deleted)
delete from MyTable where ID in (select ID from deleted)
Now we could delete records.
delete from MyTable where ID_Parent=0
Thanks,
Candy Zhou

Resolving conflicts from the mobile client

Hi guys,
I would like to resolve the conflicts from the Mobile Client, during the sync and programmatically. Is it possible?
Typically, I would to ask the user which version of the data he want to keep.
How could I do that or something equivalent?
Thanks
Best regards

For this particular issue, it is better to avoid the ID duplication in the first place,dynamically changing the primary key value in this way may cause problems if the data is resent to the client as it will be seen as a new record, rather than an update.
There are a couple of 'standard' ways of dealing with the ID issue
1) create sequences within your application (see the docs). You define these as a 'template' with a start value, window (how many values to set aside for each user) and threshold (at which point a new range is sent). We use about 25 sequences, and our practice is to set the start and window to very high values to a) stop the possibility of them overlapping with the sequences in use on the server and b) to in practice never need to be reset
This works fine as each user gets a seperate sequence range when thier client is built, and therefore never overlap causing your problem. There are some issues with sequences, but if you ensure you reset the user before doing complere re-builds you should be ok
2) create the sequences via sql scripts in the application. This will create the sequence with the same values on all clients, so when using rather than
'select ID_SEQ.nextval from' you need to set up a composite id, something like
'select (<user_number>*1000)||ID_SEQ.nextval from'
where you have some unique number for each of the users (in some other table) and you are appending the sequence value to the end of this

The same repeating frame ,but do not display in the same page

i create a report,with the same repeating frame,some of its content show in one
page,others in another page,why??
how to solve this?

hi,
try this code.
ls_fieldcat-fieldname = 'LIFNR'.
ls_fieldcat-seltext_l = 'Vonder'.
ls_fieldcat-key = 'X'.
ls_fieldcat-fix_column = 'X'.
   ls_fieldcat-outputlen = 12.
append ls_fieldcat to l_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     IT_FIELDCAT                        = l_fieldcat. " Pass the fielc cat here
it must work.... and check out thels_fieldcat-fieldname again.. you have to give the correct fielname in uppercase inside ' '.
thankyou.

I have an error message when connecting my ipad to my laptop suggesting I need 64bit version of itunes. After repeatedly downloading and reinstalling Im still getting the same message. Any suggestions please?

When connecting my ipad mini to my lap top I keep getting an error message sugesting I need to install 64bit version of Itunes. I have done this repeatedly but the same message keeps recurring. Cananyone help? Thanks

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Aperture is asking if all new photographs are the same person

Whenever I go to Faces and I'm presented with the Unknown Faces panel it asks if all the faces are the same person, every one.
I have tons of photos identified with many different people, but when it comes to unidentified pictures it only suggests one person.
I'm running Verson 3.2.3
I'm hoping someone knows the solution because it's very annoying

I am having this problem as well. I have created an Aperture 3 Library that contains photos from three sources:
12000 photos imported from an iPhoto '09 library that had about 275 faces identified; files are now referenced files
6000 photos imported from an Aperture 2 library; most files stored as referenced files
800 photos imported directly into the Aperture 3 library for the first time
Aperture 3 successfully imported all the faces that I had identified in iPhoto, but now it refuses to recognize any more faces. It makes no suggestions at all. When I go into Faces mode and select a person, all the suggestions are random faces that are nothing alike, but the suggestions NEVER include the person whose face it actually is. If I go into a second face, then it will make lots of random suggestions that DO include face 1, but again NONE of the suggestions are the selected face. It seems like the suggestion engine is actively EXCLUDING the face in question.
Problem continues after upgrading to Aperture 3.01.
Anyone else seeing this problem?

I activated my cloud membership and it worked. I just downloaded Lightroom 5.6 upgrade and it asked for a serial number. The same activation number I used before will not work now.

I activated my cloud membership and downloaded Lightroom 5.5. Today, I downloaded Lightroom 5.6 and it asked for a serial number before it would open. Why did the same serial number that worked 2 weeks ago not work now?

I activated my cloud membership and downloaded Lightroom 5.5. Today, I downloaded Lightroom 5.6 and it asked for a serial number before it would open. Why did the same serial number that worked 2 weeks ago not work now?

Cannot use REPEAT 1 + scroll through music library at the same time.

I was able to do this in iTunes 10, but with the new version I CANNOT do this. Does anyone know how?

I had a somewhat similar experience. When I enabled paid iTunes Match on my iPhone 5, iOS7, all of my locally-stored songs on the iPhone disappeared and remained gone even after I disabled iTunes Match on the iPhone.
A chat session with Apple support revealed that iTunes Match will in fact supersede any synched content on the iPhone. The suggestion from Apple support was to download on the phone all the previously-synched content via iTunes Match wireless connection. Of course, that would take hours if not days. And that crazy workaround won't help you because you want songs other than what you have in the Cloud.
It appears that various members of this forum have not had this same experience. I'm not sure what's going on here. Usually with Apple's tight control of hardware and software these anomalies are avoided.
And I didn't really need iTunes Match except I wanted commercial-free iTunes Radio (which I think is great, by the way). At least for now, commercial-free radio (with a paid subscription) can be achieved only by enabling all of the iTunes Match features. I'm not sure why Apple requires this bundling unless its part of a general push to a streaming model for everything (more revenue opportunities) as opposed to supporting local storage.

When in the middle of doing work Firefox just crashes, A sorry window pups up asking if user wants to Reload the same session or start a new session. This never happen with previous versions.

Since I updated Firefox to the latest version it crashes a lot and although I can reload the session I was working with it is annoying and time consuming. I always keep my computer 100% updated and virus free as I always run Norton. I also have 4 G of RAM and 500 G disk drive so it is not lack of RAM and never keep more that 3 windows open at the same time.

(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

Conflict with the output device and the page format.

Hi Experts,
I have two output device, one as "deskjet_printer" and one as "EPSON". Page format is "ZJV". Now, when I am taking a print preview with "deskjet _printer" output device, it is working fine, but when I am taking it with "EPSON", it gives me an error message as "Table TEMPLATE1 does not fit into window". We need to take a printuot with EPSON output device. I think we need to attach sometthing with it and I am missing something somewhere.
How to achieve this issue. Please help me in this. Appreciate your inputs on this.
Thanks in advance.

Increase the size of window or reduce the width or height og Template1 in smartform.

My iPhoto unexpectedly quits- It will load then quits with a window that pops up and say iPhoto quit unexpectedly. Then it asks your to reopen it and the same things happens. I have tried restarting and my mac is updated. Any suggestions?

My iPhoto unexpectedly quits. It looks like it is loading then a window pops up and says iPhoto quit unexpectedly. It says to "reopen" and I try it and the same things happens. I restarted it and made sure my mac is updated. Please help! Any other suggestions?

Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window repair permissions and if necessary rebuild your database
LN

IPad mini apps such as pages,keynote and numbers the same for iPad air regarding upgrade

Are iPad mini io7 updated apps eg: garage band the same as iPad air ,I updated mini apps now I need to update iPad air whithout having to download again as I'm using expensive 3G .thanks

Yes they are the same, only if you sync to a computer.
So you could sync the iPad mini to a Mac, and back up the apps to the Mac.
Then plug the iPad Air into the Mac (after) and sync the apps from iTunes onto the iPad Air.
This will work.
I have even done this with universal apps from my iPad to iPhone and Viseversa.
You only ever need to download one version of the app.

HT201263 Ipad 2 initially would turn itself completely off and have to be restarted with both buttons. Got to point that sometimes didn't work without repeated efforts. Restore stops when in the "waiting for ipad" part. Tried recommended Apple restore

Unable to turn on or do a restore.
After installing IOS7 it would turn itself completely off sometime and have to be restarted with both buttons. If I turned it off normally it would restart okay within an hour or so but overnight it would always go to hard off.
Using both buttons would usually start it with the Apple logo on the screen until it came up. Worked normally then. Knowing something was afoot I did a restore.
Now it will not turn on at all and I tried to restore in itunes but it stops at the point of "waiting for info from the Ipad"
I tried the Apple forum "recovery-restore" process several times with holding down the home button and plugging in the USB but it did not respond.
When connected through itunes it is still recognized as needed to be restored but the process will not complete.
Standing by.
Bob

Bob ...
Might be something you have not tried here > iOS: Not responding or does not turn on

Conflict Resolver trying to resolve conflicts from 2004

It's irritating..... having used Entourage and iCal since 2004, now in trying to sync with 3g, I am getting this pop up that asks me to resolve conflicts dating back in 2004. Is there an option where I can ask it to ignore retroactive dates? My only option is 'resolve with < program here >'

After our power went off, I came home to find 64 "conflicts". Evidently an .mac folder was deleted, but I seem to have resolved that. However, no matter HOW many times i "resolve" the conflicts between the Mac and my Palm Treo 650, every few minutes Conflict Resolver pops up with the same 64 conflicts. Very frustrating. I wonder if there is a com.apple...... file out there somewhere to delete and start over.

Keynote is repeatedly asking me to resolve conflicts on the same device (iPad)

Similar Messages

Maybe you are looking for