Keynote movie help

i was wondering if u could insert a .mov file on a slide in keynote play the movie and keep it playing while you play through the slides?

Not sure if this would work, but a suggestion.
Instead of running the "base audio" from inside Keynote, start your audio (timed appropriately) from iTunes. Run the Keynote with the individual audio tracks as needed.
The tricky part here would be the ducking. Maybe (a long shot here) you could install Audio Hijack which allows you to add effects to different audio streams in realtime (among other features) and using the free VST plugin Sidechain/Ducking (http://freemusicsoftware.org/category/free-vst-effects-2/sidechains) you could the base audio duck using this method. Never tried this but could be something for you to look into.

Similar Messages

Poor resolution for Keynote .mov file

Hello,
Just getting started with Keynote. I'm putting together courseware and will be using Keynote to support the presentation. I have several .mov clips I need to integrate into the presentation. I embedded a .mov file into a Keynote slide and then saved and exported the Keynote file by SHARE > EXPORT > Formats: Web Movie, Small.
While I'm getting the media to work, the resolution of the Keynote .mov file is very grainy.
Are there some settings to be aware of to get a clear resolution with a Keynote .mov file?
Thanks for sharing your insights.
Ramone

You've probably picked the lowest settings and therefor the lowest resolution!
If you go to the export menu and chose a higher setting or even tinker the custom settings to get the balance of file size / quality you want.
It may also be worth making the slide size smaller (in the inspector)so when you export it's not being downsized in the same way if you need a smaller video (height, width, not file size)

My rental stopped mid-movie, help. this has happened multiple times to me before too.

My rental stopped mid-movie, Help. This has happened multiple times to me before too. I demand I get a refund.

Hey preachit,
It sounds like we are running into issues with the iTunes software connecting to your device. If possible, lets try plugging your iPhone 5 in with a different cable. Also, try plugging it in to a different USB port on your computer:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
We may need to isolate the issue down to the iPhone or the current installation of iTunes. If the above steps have not resolved your issue, remove and reinstall iTunes:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
Thanks,
Matt M.

Next Slide/Slide Transition in Full Screen on my Keynote Movie

Hello everyone,
I hope you can help? I have been using Keynote to prepare some slides for a talk I am delivering and to ensure I have no 'technical mishaps' I need to have a copy of the Keynote in a .mov format so that it can be played in Quicktime on a Mac or a PC.
I have exported the Keynote to Quicktime which works brilliantly on my Mac and on the PC when you view it in the Normal View. You can use the left/right arrows on the keyboard to move forward and backwards through your slides and use the mouse to access the hyperlinks. The problem occurs when I enter Full Screen View (which will be necessary when I deliver this talk!) - although a mouse click moves the slides on I cannot find any way of moving back a slide, or of accessing my hyperlinks.
Please help?!
Thanks, Chrissi

Do you have the PDF version to fill the full screen and not leave borders? If you print to PDF (not create PDF), then a margin is added by default (as when you print to paper). The border can be reduced to 0, but that is an extra step with the print. As I recall, the PDF Maker (create PDF) does not include the margins. Thus the whole margin bit may be the issue.

Keynote movies stutter badly once exported to QuickTime

My Keynote presentation features a 2 minute movie. When I export the presentation to QuickTime, although the slides work fine, the movie stutters badly. To be specific, the movie audio is fine, but the visuals stutter badly.
Any workaround for this? Thanks!

I've been having problems in iMovie and Quicktime both. Whenever I used a song from iTunes in an iMovie, I would get stuttered playback. Many others experienced problems with stuttering video when they had extracted audio. Your particular problem could be many things. It could be your graphics card is too small to handle this. If you are running OS X tiger and have virex installed, then virex is using most of your CPU processing power (Do a search on Tiger and Virex to get the uninstaller). Finally you could be having problems with quicktime 7.0.3. If that is the case, then you can just reinstall 7.0.1 and everything should work fine. Or it could be something else. Hope some of this helps.
Thanks,
Clint
Link for virex uninstaller: http://docs.info.apple.com/article.html?artnum=301525
Link for quicktime reinstaller: http://www.apple.com/support/downloads/quicktime701reinstallerforquicktime702.ht ml

Keynote + movies - burn to dvd

Hi all,
I have a Keynote presentation that includes QT movies on some of the slides.
My first problem was to launch a transition only after the movie was played, which I solved by timing the video and asking keynote to do the transition after that time (I found that solution a little weird.. I wished I could just say "do transition after movie is played, but welll...)
Anyhow, I wish to transfer the presentation onto dvd. When I export to iDVD or QT, the options presented only allow me to set the same time between transition for ALL the slides, which bothers me a lot, for obvious reasons.
Any bright ideas to help me solve that problem ?
I'm starting to wonder whether I have to move to DVD SP and redo my whole thing with scripts and slides and movies (imagine my excitement)....
Help would be greatly appreciated since I need this project ot be done by next Wednesday...

You can playback on the computer, an iPod or Apple TV or back up to a hard drive, CD etc.
But making a DVD (like you think of renting from Blockbuster) against the rules (though a bit unclear since you can back up your purchases)
Terms of Service

Itunes wont download my movie HELP!!!!!!! err - 3150

I am trying to download a movie adn ieverytime i try to download it it comes up with a message that says that itunes could not connnect threw network, and yes my computer is on a network andyes it is connected to the internet, becuase if it wasn't i wouldn't be sending this to you know. HELP I need this and i wont let me download it. the error code i keep getting is "err - 3150". HELP!!!!!!!!!!!!!!
please reply

I'm having this same awful problem.... I tried to download highlights of Steelers vs. Chiefs and everytime I try to re-download... ERROR 3150!!!!

Keynote Movie Export with Manual Advance doesn't work posted on MobileMe

Hi,
After exporting a Keynote Presentation to Quicktime with Manual Advance function checked the Manual Advance function is working perfectly.
However, after I post the same Quicktime movie on my Mobile Me gallery (or a webpage via iWeb) the Manual Advance only works on slide 1 taking it to slide 2.
When I click to advance at slide 2 it returns to slide 1 instead of going to slide 3...
Any suggestions appreciated.
Thanks in advance,
Clayton

This could be the old bug that causes this if the movie wasn't fully loaded. Try waiting till the movie fully loads (if it's not showing a progress bar, just wait a few min as it will probably load fully in that time). Then try it again. In my tests with older versions (haven't tested 09) this was the case...clicking on anything before the movie fully loaded sent you back to slide 1.

No Sound On Exported Keynote Movies

When I export recorded presentations as movies they come through with no sound. The presentation plays normally with the correct recorded timing but there is no narration. I know the narration got recorded because I can play it back in Keynote and hear it. Just not when I export it.
I have spent a lot of time on the phone with AppleCare and gone through all the trouble shooting they advised and still no sound. Does anyone have any suggestions? This is a very important feature for me to be able to use. Any alternatives to Keynote's built in export function for producing movies from the recorded presentations?

Thereby keeping us on the full price upgrade treadmill (O) At least you can sat it represents feature improvements for the money – unlike so many other software non-free upgrades to get major bug fixes like the dreadful Bento.
I think a major feature request, Precision placement of end positioning for builds is kind of included by way of Magic Moves or whatever they are calling it but it's only between slides. Still implies numeric control of position which could be a BIG improvement on zooming in, fudging around by hand only to lose control of the object as it disappears behind its start image. It's kind of like a feature I requested, duplicate slide with objects in end positions (as a easy fix) but better in that the end position can be modified and Keynote calculates the adjustment to move, rotate etc.

QT Movie help to post to .mac account or own web site

Hello. I used iPhoto 6.0.6 to make a slideshow. Then I exported it into a large quality QT movie and it's 460MB.
I want to post it to my .mac account and my own web site (I use Fetch to upload folders--that's the extent of my posting knowledge) and found a help topic mentioning using the "share" button on QuickTime Pro 7.2.0. My share button is grayed out and I've registered my version.
I also tried dragging the movie to my Public Folder on my iDisk, but it stalls out on the "closing" step and requires the computer to be restarted.
Help with this would be greatly appreciated.

Compressing QuickTime files is nearly an art form and every file may need different settings based on the content in them. Lots of action requires a faster frame rate. Image only files can reduce that to microscopic frame rates and save both bandwidth and load times.
I've been making QuickTime files since version 3 and there are many ways to get both small file sizes and a sense of "drama" when using just still image files. Some of mine to give you some ideas can be found at this link:
http://homepage.mac.com/kkirkster/03war/
I think my biggest file is still under 6 MB's.

Movie Help!

Well, So I just downloaded a movie from my computer. I decided to put into my iPad when so I can watch it anywhere I go. So this is the problem, whenever I watch it, it all goes fine until a certain time the screen would turn black and I would only hear the audio. I have done as many things as I can, re downloading, restarting my iPad etc, etc. I seriously need help with this. Please do help me if you know any solution. :S

yeah, it has the video option when I turn it on, on the main menu that is. It has everything under it as well. My dad sells the things and cant even figure out how to make it work.....

DVD movie help please

Hi
I hope someone can spare some time to help me resolve a problem I have.
My wife has made a file in imove consisting of pictures, video and music. We then burned a DVD in toast 7 ( DVD video setting). It plays fine on PC but wont in front row ( the first page is there but it wont play any further). Has anyone any idea what we have done wrong.
Cheers
Pete

Why don't try burning the movie using iDVD. Just go to iMovie menu and choose share -> iDVD. Burn it right from iDVD and try. I am not sure about Toast.

Keynote movie html

I've embedded a video into keynote and everything works fine until I export as html. When I few in a browser my movie now appears off the page.

Hi Roddy,
Unfortunately the movie has to appear at the side of the slide.
It looks like this in Keynote
and this in the browser

Keynote movie exposure

Can I modify the exposure of movies in keynote 6.1?
As I see, the exposure can be adjusted in case of images, but if a movie is too dark, can it be corrected somehow? The imovie-adjust-export routine is a no go, cause i have a square format movies, and imovie cannot export square movies (I end up with correct exposure level, but with 2 black bars on the side of the movie).

You can change brightness contrast and colour.
Download and install MPEG Streamclip
open and drag the video file into the main window
File > export to Quicktime
compression: H264
adjustments: change brightness, contrast, saturation, click OK then Preview
change the settings if required

Was looking at app and its stuck on the page wont move help

can someone please help im desperate was looking at a game on the apps download and its stuck on the page cannot get it to move even tried downloading it and still wont go away

iOS Reset -
Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

Keynote movie help

Similar Messages

Maybe you are looking for