Keynote on iPad to won't go into presenter mode

I have an iPad 2 (latest iOS 6) and an Apple 30pin VGA adapter that connects to an external projecter that I have very sucessfuly used in the past to present slides with presenter notes. I updated the Keynote app to 1.7.2 (latest version) last week.
This morning, using equipment that I have always used I could not for the life of me get Keynote into presenter display, all it would do is mirror, which is useless to me. I need my notes.
Does anyone have any idea why this is occuring? From what I understand, even if I only connect my adapter when play is tapped, the slide show should automattically go into display mode. Please help, this is driving me nuts.
Thanks in advance,
Nick

this is a software glitch, i suggest holding the home button and power button together untill you see the apple then let go, do not slide to power off, if all else fails you might have to restore the device to factory settings, still doesnt do that then its a hardware issue, and its probably going to be 250$ or more to replace

Similar Messages

  • My iPad 2 won't go into sleep mode or let me shut it off, any help?

    My iPad 2 won't go into sleep mode or let me shut it off, any help?

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • IPad 2 won't go into sleep mode while charging

    In the past couple of days my iPad 2 will not go into sleep mode while it is charging. The screen will go dim, but never go black. Any suggestions? I know I can just push the button on the top to force it into sleep mode and it will, but I've never had to do that before. I've had this iPad for over a year.

    this is a software glitch, i suggest holding the home button and power button together untill you see the apple then let go, do not slide to power off, if all else fails you might have to restore the device to factory settings, still doesnt do that then its a hardware issue, and its probably going to be 250$ or more to replace

  • HT1430 ipad won't go into sleep mode

    ipad won't go into sleep mode, stays lite all night, litening to radio on it, but the screen used to go dark.

    Check Settings>General>Auto Lock and see what you have it set for.

  • Upgraded to the latest Keynote (5.3 1170) and now videos won't play in presentation mode, only audio

    Upgraded Keynote on my home and work computers to the latest version in the AppStore and now videos won't play in presentation mode.  In edit mode you can double click and it will play in the editor.  This happens on both computers running the latest version of ML (10.8.4).
    Any help here?  Alread tried a reinstall of ML on one machine with no luck.
    Was previously running Keynote 08 (non AppStore version).  Tried creating brand new presentations in 09, no luck.
    -steve

    I had the same problem today in front of an audience with 300 people (MacbookPro OSX 10.10, Thunderbolt-VGA adapter, PPT 14.4.6).
    Here what I figured out so far:
    1. It happens when you have PPT open and connect to beamer afterwards
    2. You can resolve it (in my case) by quitting PPT and launching it WHEN connected to beamer
    3. Yet, make sure Mac does not go into sleep mode or you get a lock-screen in the waiting time. if you do so, you get back to square 1. quit PPT again 2. restart it.
    4. Also.... in one case I had to hit the volume control once to get the sound back even though movie was playing
    So in short: Connect to beamer first, then launch PPT
    I know it is only a symptom fix but it worked for me

  • Help! my ipod wont do anything. It wont charge, turn on, the apple icon wont appear, it won't go into reset mode or dfu mode. Itunes wont recognize it, no buttons work. It did this suddenly with no warning. What do i do? :(

    My ipod won't do anything. it wont charge, turn on, the apple icon wont appear, it won't go into reset mode or dfu mode. Itunes wont recognize it, and no buttons work. The screen is black, and nothing i try will turn it on or give any sort of hope. It did this suddenly without any warning... what do i do? is there a way for me to fix it or is it beyond help?

    Hello, pravin729.  
    Thank you for visiting Apple Support Communities.  
    I understand that your iPod touch will not turn on.  I would start with going through the troubleshooting steps in the article below.    
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
    http://support.apple.com/en-us/HT201412
    Cheers,
    Jason H.

  • My ipod won't go into disk mode

    i've tried and tried and it won't go into disk mode. it shows an apple then a folder with the ! and when plugged into the computer sometimes it'll say don't disconnnect for about 10 seconds and then it'll go back to the apple.
    also it sounds as though the drive is stuck in a loop; a weird repetitive whirring sound when i hold it up to my ear.

    If you can't get it into disk mode and restore the iPod it most likely needs service, especially with that noise it's making.
    Service request.

  • HT201263 What if my ipod touch won't go into recovery mode because it is pw locked?

    What if my ipod touch won't go into recovery mode because it is pw locked?

    Go into Recovery Mode per the instructions here.

  • My iPod classic won't go into disk mode

    I have an iPod Classic (120GB) here. When I turn it on, it gives me a screen with the Apple logo first and after a few seconds a screen with a red circle, a cross in the circle and the text: www.apple.com/support/ipod . I followed all the steps on that page, however my iPod won't go into disk mode. The iPod is not seen by my iMac and iTunes. What to do?

    See Here
    iPod doesn't appear in iTunes
    From Troubleshooting Here
    http://www.apple.com/support/ipodclassic/
    iPod issues? Try these five steps first: Reset, Retry, Restart, Reinstall, Restore.

  • Laserjet m276nw won't go into eco mode

    Hi all,
    For some reason my new printer won't go into eco mode. I've doubled checked the settings and even though it's idle for days the touch console is always on and it never enters sleep mode.
    Any idea how to fix this? I've checked the settings via the Web interface and the touch console and they both have this mode enabled. I'm afraid if this keeps up it'll burn in the console UI and use a lot of electricity.
    Thanks.

    Hi @Mkakers,
    I understand that you are having issues with the printer not going into sleep mode. I would like to help you resolve this issue.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    I have provided the menus for the sleep modes, just to double check the settings again. This information was provided by the manual on page 139. LASERJET PRO 200 COLOR MFP.
    Set the sleep delay:
    1. From the Home screen, touch the Setup button.
    2. Open the following menus:
    ● System Setup
    ● Energy Settings
    ● Sleep Delay
    3. Select the time for the sleep delay.
    NOTE: The default value is 15 minutes.
    Set the Auto Power Down delay:
    1. From the Home screen, touch the Setup button.
    2. Open the following menus:
    ● System Setup
    ● Energy Settings
    ● Auto Power Down
    ● Power Down Delay
    Update the printer's firmware if the issue continues. HP LaserJet Pro 200 color MFP M276nw Drivers.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    How is the printer connected? (USB/Ethernet/Wireless)
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Yosemite install won't boot into any mode

    Really sorry if this has been covered before but I spent a good time searching and couldn't find any existing posts with symptoms to the same extent.
    I've got a 2008 iMac 27" and have the latest version of Yosemite installed (10.10.1 I guess). I upgraded to Yosemite probably 2-3 weeks ago and everything has been fine. Then yesterday when I woke it up from sleep it effectively froze - no mouse or keyboard input. So I did a reset by holding down the power button, and when I turned it back on it went to the apple logo boot screen with a progress bar that gets to just below 50% and stuck there. I've restarted quite a few times and left it running up to six hours and still it doesn't boot.
    Now this is similar to the issue here - OSX Yosemite won't boot after install on mid 2010 iMac - except I am unable to boot into any mode, and the only startup keys accepted are the P-RAM reset. It won't boot into recovery mode (command+R), safe mode (Shift), startup drive select mode (Option), diagnostics mode (D)... nothing
    I've booked into a Genius Bar appointment when the Apple stores reopen after Christmas, but I'm hoping that is a last resort and to be honest I'm unsure what they can do for me except to say it's a lost cause.
    Are there any suggestions on what could be happening and why it's ignoring the startup modes? I would have suggested the keyboard not being recognised except the P-RAM command works perfectly, so it's obviously seeing it. I'm a little scared that because it won't let me into a boot device menu (which must operate independent of any HDD) then there's an issue ahead of that in the boot sequence, so possibly the motherboard is shot...
    Sorry if I seem a little desperate. I had a HDD crash two years ago to the day (great Christmas present Apple) and it kind of puts a dampener on things.
    Happy holidays and I'm grateful for any help that anyone can offer

    Hello there, semerton.
    Great job on troubleshooting the issue on your own so far. The following Knowledge Base aritcle offers some additional steps to try for resolving your issue:
    Mac OS X: Gray screen appears during startup - Apple Support
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • OS X Lion 10.8.2 won't boot into recovery mode

    Help! OS X Lion 10.8.2 won't boot into recovery mode, I get a grey screen, the apple icon and the spinning symbol...Does anyone have any suggestions?
    Have a MacBook Pro (2009) and had no problems until upgrading to LIon from Snow Leopard... thanks!

    Hi there - thanks very much for your suggestion, it did reboot eventually but took a long time to get there.
    I've have run Disk Utility. After Verifying the disk it said it needed Repairing - so tried doing that and got the message " Error: Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files" I have got Time Machine but haven't backed-up since Dec 12...Can I use "Restore" to copy the MBP HD to an external HD and then re-install Lion?

  • TS3048 bluetooth keyboard won't go into discovery mode

    Is my keyboard bad?  It just stopped working.  Fresh batteries.  Won't go into discovery mode to pair with mac mini

    Does the light on the KB light/blink?

  • Won't go into sleep mode

    won't go into sleep mode; other functions work. Eventually - maybe 10 mn - it will get to screensaver.
    Ideas?
    thanks

    won't go into sleep mode; other functions work. Eventually - maybe 10 mn - it will get to screensaver.
    Ideas?
    thanks

  • IPad Mini 1st Gen Springboad Won't Go Into Landscape Mode

    After updating to iOS 8.0.2, I noticed that my iPad Mini 1st Gen will not go into landscape mode anymore when in the Springboard. When I'm in an app it works, but as soon as I press home it goes straight back into portrait. I checked all the settings and everything seems to be ok including the options for the rotation lock/mute button. Even the rotation option in the control centre is off. I have no clue what's going on. Can someone shed some light?

    Have you tried a soft-reset to see if that fixes it : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Or there is an iOS update, version 8.1, which has just been released - one of the fixes listed for it, from http://support.apple.com/kb/DL1758, is
    Fixes bugs that could cause screen rotation to stop working

Maybe you are looking for