Keynote Remote - Stops working

Hi,
My remote seems to work fine at first, but if I don't switch the slide for say 5 minutes, it seems to stop working. I see the current slide but if I try to switch, it won't let me. No error message or anything. Anyone having a similar problem or know of a way to turn on some debugging?
Thanks,
-chris

I dont have iOS devices but could this Apple knowledge base item help?
Using Keynote Remote

Similar Messages

Remote stops working when I insert DVD

Since I got my computer two years ago, every once in a while the remote stops working. I go in to System Preferences and disable the infrared receiver, and it works again. In the last week, the remote has stopped working every time I insert a DVD. Pairing or unpairing the remote makes no difference.

Hello ash_Q,
Thanks for using Apple Support Communities.
To troubleshoot issues with the Apple Remote please follow the troubleshooting steps in the article below.
Troubleshooting the Apple Remote
http://support.apple.com/kb/HT1722
Take care,
Alex H.

Why do Apple TV remotes stop working?

Why did my Apple TV remote stop working?

Mine isn't working either. Just changed the battery a couple weeks ago. It was working fine yesterday, now it won't work at all. I also tried resetting the Apple TV and pairing the remote (holding down menu and rewind for 6 seconds close to the device). Anyone?

Toshiba All-in-One DX1210 - remote stopped working

Hi,
I have a DX1210 (PQQ09A-02900G), and I have an issue where the remote works fine when I start the machine for about 15-20 mins, then it just stops working.
There are no errors and can't find anything in the event logs.
Only way to get it to work again is reboot or put it to sleep and wake it up again.
Still only lasts another 15 mins or so again.
Anyone come across this before? Running Win7 64bit.
Cheers,
Nathan

Hi
Did you check if driver reinstallation/update would fix this issue?
I think you should check this
There is an driver called Winbond CIR Driver
http://www.mytoshiba.com.au/support/computers/all-in-one/dx1210/pqq09a-02900g/download?os=25
You should uninstall this firstly and after new reboot, install this package again.

IMON Remote stopped working after update?

Hi,
I have an IMON_PAD remote which simply worked out of the box since the chassis got setup; it's an Origenae S21T - LCD (Monitor) Touch Screen chassis.
As my device is the newer model things should just have worked with the kernel driver and no need for Lirc however, after the update to kernel version 3.17.1-1 x64 and reboot things stopped functioning and I can't work out why.
The output of lsusb is:
Bus 001 Device 006: ID 15c2:0036 SoundGraph Inc. LC16M VFD Display/IR Receiver
checking proc the device is mentioned as:
I: Bus=0003 Vendor=15c2 Product=0036 Version=0003
N: Name="iMON Panel, Knob and Mouse(15c2:0036)"
P: Phys=usb-0000:00:14.0-13.3/input1
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.3/1-13.3:1.0/input/input13
U: Uniq=
H: Handlers=kbd event13 mouse0
B: PROP=0
B: EV=100007
B: KEY=10800320 200000200000000 30000 400110000 411000000801 e168000000000 10000002
B: REL=103
I: Bus=0003 Vendor=15c2 Product=0036 Version=0003
N: Name="iMON Remote (15c2:0036)"
P: Phys=usb-0000:00:14.0-13.3/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.3/1-13.3:1.0/rc/rc0/input14
U: Uniq=
H: Handlers=kbd event14
B: PROP=0
B: EV=100013
B: KEY=fff 0 4400000108c0320 2d5008000000000 30000 400119000 418614000801 809e168000000000 200000010004002
B: MSC=10
Running lsmod the module is loaded:
rc_imon_pad 12397 0
imon 29693 0
rc_core 22437 3 imon,rc_imon_pad
usbcore 199381 10 uas,imon,pvrusb2,btusb,usbtouchscreen,usb_storage,ehci_hcd,ehci_pci,usbhid,xhci_hcd
The issue starts when trying to run "ir-keytable -t".... the basic output shown is this:
Found /sys/class/rc/rc0/ (/dev/input/event14) with:
Driver imon, table rc-imon-pad
Supported protocols: RC-6 other
Enabled protocols: other
Name: iMON Remote (15c2:0036)
bus: 3, vendor/product: 15c2:0036, version: 0x0003
Repeat delay = 500 ms, repeat period = 125 ms
Running in Verbose mode:
Found device /sys/class/rc/rc0/
Input sysfs node is /sys/class/rc/rc0/input14/
Event sysfs node is /sys/class/rc/rc0/input14/event14/
Parsing uevent /sys/class/rc/rc0/input14/event14/uevent
/sys/class/rc/rc0/input14/event14/uevent uevent MAJOR=13
/sys/class/rc/rc0/input14/event14/uevent uevent MINOR=78
/sys/class/rc/rc0/input14/event14/uevent uevent DEVNAME=input/event14
Parsing uevent /sys/class/rc/rc0/uevent
/sys/class/rc/rc0/uevent uevent NAME=rc-imon-pad
/sys/class/rc/rc0/uevent uevent DRV_NAME=imon
input device is /dev/input/event14
/sys/class/rc/rc0/protocols protocol other (enabled)
/sys/class/rc/rc0/protocols protocol rc-6 (disabled)
Found /sys/class/rc/rc0/ (/dev/input/event14) with:
Driver imon, table rc-imon-pad
Supported protocols: RC-6 other
Enabled protocols: other
Name: iMON Remote (15c2:0036)
bus: 3, vendor/product: 15c2:0036, version: 0x0003
Repeat delay = 500 ms, repeat period = 125 ms
and finally the output from logs:
Oct 29 20:08:04 HTPC1 kernel: Registered IR keymap rc-imon-pad
Oct 29 20:08:04 HTPC1 kernel: imon 3-13.3:1.0: iMON device (15c2:0036, intf0) on usb<3:6> initialized
Oct 29 20:08:04 HTPC1 kernel: imon 3-13.3:1.1: iMON device (15c2:0036, intf1) on usb<3:6> initialized
Oct 29 20:08:04 HTPC1 kernel: usbcore: registered new interface driver imon
Oct 29 20:08:04 HTPC1 kernel: imon 3-13.3:1.0: Looks like you're trying to use an IR protocol this device does not support
Oct 29 20:08:04 HTPC1 kernel: imon 3-13.3:1.0: Unsupported IR protocol specified, overriding to iMON IR protocol
I'm not sure if something is conflicting or if the kernel is thinking that this is the older remote that needs to be used with Lirc but I'm really stuck on how to fix this. I can tell the receiver and remote are working as both sides blink when sending a signal, also I can power up the box using the remote "ON" button.
Would somebody be able to suggest something or help out in some way? This really should be plug and play as the driver is already in the kernel but obviously it seems to still have issues.....
Many thanks.

I know I'm in an ArchLinux-Board ...
... but I have on my XUbuntu with Kernel 3.13.0-40 the same problem with my IMON PAD.
Could this patch help me, too? And - if yes - how can I apply it?
Quite desperate since about >2 weeks, wife and children already haul me over the coals :-O
TIA!
HG

Wired Remote stopped working.. PLEASE HEL

I got the zen a few months ago, with little problems thus far. Last month, my headphones decided to stop working. No big deal, I am very acti've so I figured I was just too rough with them. I bought some new phones, Sony in ear types. Recently, my Wired Remote has stopped working. It will work some days, and then stop working just like that.
I am just wondering if this has happened to anyone else out there.. and if so, how they solved their problem.
Please help, and thanks.

The wired remotes are notoriously badly made - you'll probably need to contact Creative support to get it replaced.

Mountain Lion - iTunes WiFi Sync and Remote Stopped Working

OS X Mountain Lion 10.8
iTunes stops connecting wirelessly to both my iPad and iPhone with no settings changed on any of the three devices. Only change made in the last 2 hours was enabling of Photo Stream on the iPhone and iPad. Other than this, I have fiddled with no settings on my computer or on the iPad or iPhone.
- Home Sharing is ON and active. WiFi is working on all three devices and all are able to access the internet.
- All devices on the same network.
- WiFi sync is enabled on both devices in the iTunes settings, but both disappear upon being unplugged
- Remote is unable to find to my iTunes library on either device, and I am unable to access Home Sharing from the Music app on either device.
- No firewall settings have been modified at any given time.
Why is this happening? I have turned Photo Stream off on both devices since this stopped working, but it's made no difference. What has caused it to stop? This is so annoying...

I saw a tip elsewhere to go into Keychain Access and clean out any saved passwords that relate, even preipherally, to the Exchange account in question. I did that, and now it seems to sync all calendar events. This may be a coincidence, or it may not. You decide

Earphone and remote stopped working.

I have the earphones that come with the iphone 5s. I've had the phone for a little over a year and I opened the earphones a couple of months ago. They suddenly stopped working. This has happened with every pair of Apple earphones, I've purchased. I have the box. Would I be able to get new ones? The right ear doesn't work and the remote doesn't work either. Please help.

Hi misty_saha,
Included Apple accessories carry the same coverage as the device they're included with, so if your iPhone is still covered under its Warranty or AppleCare plan, your headphones would be as well. For more information on coverage and service options if your earphones appear to be faulty, you may find the following page helpful:
Apple - Support - Service Answer Center
Regards,
- Brenden

I-Trigue 3800 Remote stopped working..

The remote in my i-trigue 3800 stopped working all of a sudden. I replaced the battery, and the volume worked for about 5 clicks, and again, it stopped working. Is there a replacement remote for these speakers or something else I should be aware of?
thanks.

I have the same problem. One day I turned my computer on and the subwoofer failed to work, but my satellites are OK. A real pitty, because just a couple weeks out of warranty. Good speakers when they work, otherwise an awkward load for the trashman. I opened the thing up, thinking the warranty sucked anyway... and saw nothing apparent, everthing seemed connection alright and no burn marks or bad smells. It may be something more involved, so I am going to let this 40 Euro speak set go. *boohoo* and buy myself a boston acoustics set, which are better. I had a set that last 8 years and would have lasted more if I had taken them myself on a plane when I emigrated.
I suppose these days in electronics, it not worth sending it in for repair, chances you can buy a better system with the shipping, repair and tax you would pay to repair it, but if it lies in your heart, then thats your business. Otherwise these depreciative things, are not worth the time and sweat.
Here's to a speaker system that lasted only a year. *cheers*

Apple Remote stopped working with Lion on iMac

My white Apple Remote does not work with Lion on my iMac 2.4ghz Core 2 Duo anymore.
I'm sure it was working recently as I was able to control the volume on my RadioShark application. Now that doesn't work anymore and I can't seem to get the remote to work with anything.
I've tried restarting my iMac, swapping the remote's battery, and using another remote but still no success. The only response I get is from the remote's 'Menu' button which, when pressed, toggles between two graphics on screen - one a four-way arrow indicator with a centre button, and the other what appears to be a Forward/Back, Centre button with corner indications for Expand/Shrink.
I've tried the 'Pair' option but pressing 'Menu' and 'Fast Forward' does nothing on screen - no sign of the chain-link 'Paired' symbol. Neither of the white remotes I tried is 'Paired' with the iMac.
It seems I must have done something to cause this but can't think of any change I made that could be responsible. I know Front Row is no longer accessible in Lion, but is there any other app I could test my remote on? Any kind of hardware reset needed? (unlikely, I know, with two separate remotes showing the problem).
Anyone have any ideas?
Thanks.

I'm replying to my own question because my remotes are working again.
I'm not sure what I did to fix the issue, but I tried shutting down all open applications (I remembered that by default Lion re-opens with everything as it was). And shortly afterwards I got full functionality back for my Apple Remote.
I'm not sure what caused the issue. I did install Easy Timeline, which I'd downloaded today from the Mac App Store. It has Apple Remote functionality, so I'm not sure if it was in some way implicated. It's working now with my remote, as is iTunes, and RadioShark.
Weird!

Keynote files stopped working and TOC has disappeared?

I have a few Keynote files that I brought into iBooks Author. They originally played fine. But now, when I preview on iPad, they simply won't play. Plus, my Table of Contents has disappeared when I go to preview. I can't figure out why. Any thoughts? Thanks for any help.

Thanks for your help. I tried your suggestion, but the .ibooks file had the same issues. Then I tried creating a new file and bringing a Keynote file in...still the same problem. Then I reinstalled iBooks Author...same problem. Then I got to thinking maybe its got more to do with my iPad. So I was just getting ready to reinstall iBooks. Anyway, I disconnected my iPad from my iMac, and for some reason, everything started working. Bizarre. Anyway, thanks again for your help! :-)

Remote stops working after a few days

I've recently run into a problem at one of my sites. Nothing has been
changed on the Netware server, and nothing was changed in ZenWorks,
but I
get a message stating, "The Remote management agent was unable to
locate the
workstation in NDS"
The server is running eDir 85.27c, NW5.1 SP5, with Zenworks 3.2 sp1.
I
checked for NDS synchronization issues, and there are none. The
server has
a replica of the partition, and DSRepair comes up clean.
If I delete the workstation and unregister it, then allow Zen to
re-register
and import the workstation, it will work again, for a few days.
Any help would be greatly appreciated.
Frank

Daddyo,
It appears that in the past few days you have not received a response
to your posting. That concerns us, and has triggered this automated
reply.
Has your problem been resolved? If not, you might try one of the
following options:
- Check the knowledgebase at http://support.novell.com
- Check all of the other support tools and options available at
http://support.novell.com
- You could also try posting your message again. Make sure it is
posted in the correct news group. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept
our apologies and rest assured we will issue a stern reprimand to our
posting bot.
Your Novell Support Connection Forums Team
http://support.novell.com/forums/

Re: XR2 remote stops working with X1 Box - getting beyond "reset the box" a

Having the same issue. Doesn't appear that there has been a fix. I tried to pair it with my box, per the instructions on the back of the remote, and nothing happened on the screen. After a hard reboot of the box, the remote works fine once again.

cdtravers wrote:
Having the same issue. Doesn't appear that there has been a fix. I tried to pair it with my box, per the instructions on the back of the remote, and nothing happened on the screen. After a hard reboot of the box, the remote works fine once again.Is the remote paired? http://customer.comcast.com/help-and-support/cable-tv/remote-program-the-xr2-or-xr5-to-aim-anywhere/

IMac remote stops working

Hi guy,
I have not used my imac remote for a while, probably 2 months, so i have no idea to trace the root of the problem but it is dead atm. Nothing happens when i click Menu,Forward,Backward,Up/Down Volumn key, Stop/Play.
I wonder is it a hardware or software issue ?
Im using Mac OS X 10.4.9 on iMac 20'.
Thanks for reading.
iMac 20' inch Mac OS X (10.4.8)

Have you tried replacing the battery?
Good luck.
PM G5, PB G4 17", iMac G5 20", iPod 5G 30GB, iPod Nano 1G, iPod Shuffle 2G Mac OS X (10.4.9) AirPort Extreme (new) WDS with AirPort Express

My Apple Remote stopped working. I tried to use the serialnumber to submit it to repair but the serialnumber isnt working neither and no luck on finding the warranty paper. What now?

When I fill in the serialnumber it keeps saying wrong serialnumber..

Call Apple tech support:
http://support.apple.com/kb/HE57
or make an appointment at an Apple Store, if there are any in your area.
Regards.

Keynote Remote - Stops working

Similar Messages

Maybe you are looking for