Keynote: Some images are missing

Ever since I upgraded to Keynote 6.2 and Mac OS 10.9.3 my images are deleted somewhere between me saving the file, and retrieving the file again later.
Last night I was working on a brand new presenation I created (not upgraded or imported). Everything looked great. I saved the file on my computer. The next day I opened up the presentation to work on it, and I received that warning dialog and about half of my images were gone. I cannot tell if there is any common trait between the ones that were gone, or not.
This is causing me to lose hours and hours of work. I'm either going to switch to Powerpoint, or downgrade my Keynote. Not sure which.
I see lots of people with this same issue, but under different circumstances than mine.
Has anybody successfully resolved this issue?

Ah! That is perhaps the missing piece of the puzzle.
I use Google Drive to synchronize the folder on my computer with my Google Drive in the cloud. Thinking back on it, I probably created the presentation on my home computer, then tried to open the presentation on my work computer. Bam. Missing images.
I will have to run a test to confirm, but I feel very certain that this is most likely the culprit.
The new Keynote file format seems to contain multiple files, and that probably was the catalyst.
Unfortunately, that means that your zip file workaround will not work for me.

Similar Messages

'Some images are missing because they were deleted from the document'

Hi,
I created a document in Pages v5.2 last week and have just opened it and received the following message:
'Some images are missing because they were deleted from the document'
When I try and replace the missing images I get the following message:
'The image "filename" couldn't be inserted.'
When I try and reimport the original image I get the following message:
'The image "filename" couldn't be inserted. This image is of an unsupported type.'
If I try and insert an image that was not in the document before, in the same file format, it goes in fine.
If I insert the original image into a blank Pages document it goes in no problem.
I would also like to point out that the data folder still contains lots of versions of images in the document, but does not seem to have any of the ones I am actually using, which I guess is where the problem is. However I have no idea how or why these specific images have been deleted.
Any light on how this problem has come about, and the best possible way to fix it would be greatly appreciated.
Alex

I have Pages v5.2.2 on OS X 10.9.4. I can not reproduce your stated issues with images in this version of Pages. I don't have a solution for you. See my test in the third paragraph. If I were experiencing this behavior, I would perform a Safe Boot to clear out System caches, and try again, before kicking Pages v5+ to the curb.
The Safe Boot would be pressing and holding the shift key at boot chime, and until a horizontal progress bar shows on the screen. At the eventual login screen, after you type your password — press and hold the shift key — press the right arrow to login, and release the shift key after the Finder menu bar appears. Then reboot normally.
I have created a new document. Dragged and dropped an image into it and saved. Exited Pages. Reopening worked fine. Deleted the image, and proceeded through the following steps, punctuated by save, exit, reopen, and deliberate image removal. Different .jpg image each time. About mid-way through the following item list, I rebooted the MBA just to throw some "spin" into the process. I did not perform a Safe Boot prior to this series of tests.
Toolbar > Media insert
Insert > Choose jpg into document
Text Box image fill
Shape image fill

I have updated my website, and uploaded via FTP, but some images are missing. I have deleted them in i

I have published a website with iWeb on MobileMe quite successfully. I purchased a second domain name, and republished the same site on GoDaddy before trying to point my MobileMe website name to the GoDaddy server. I was unable to upload several pictures to the second site, and posted my dilemma here. It was suggested that I try using Cyberduck to publish via FTP, which I did. I was still missing the same images. The error message says that there was a communications error with the FTP server and to try again later. I have been able to upload several more new images to the second domain name just by using iWeb's publish feature.
I want to point my MobileMe website name, www.melissaveres.com to GoDaddy, which is now hosting www.mveres-engraver.com but it will only show the site as it is currently published, with several missing pictures. I have tried to delete the photos in iWeb, bring them back in, and republish but with the same results. I have contacted GoDaddy support, who can only tell me there is no file information for those open (missing) pictures, they have heard of this happening before, but had no information on how or if it was resolved. Anyone know how to get these pictures up before I move from MobileMe?
Melissa

Bring up the Activity window (Command+Option+A) for you site and check to see what files are missing and where they belong. The URL for the missing files will tell you what folder they should be in.
Then publish you website to a folder on your hard drive and open it locally with your browser. Check to verify all images and present and the site works as you want. Then you can upload the missing files or folder containing the missing files or the eintire site folder to your GoDaddy account with Cyberduck.
OT

Images are missing in Project Manager

I’m replacing old images with new ones in RoboHelp HTML 10.
I’ve deleted the old pictures in Design view and pasted the new pictures in. (I know this is not the recommended way but with lake of time I found it to be the fastest way and we don’t feel the need to give the files described names at the moment.)
It has worked fine until now when I noticed that some images are not showing in Project Manager. I see the “folder” Images and I see a lot off images there but some are missing. The “missing” images are shown in Design view and in the browser after publishing. But in the report Unused files the “missing” images are listed as unused.
I have tried to
close and reopen the project,
generate and publish the project,
delete an “missing” image from Design view and insert it by using Insert / Image. After saving this image, and some other “missing” images, are shown in Project Manager. But not all “missing” images.
Does anyone know why this is, or more important how to get Project Manager to show all images that are used in the project (without having to go through all 154 images trying to figure out which are used but “missing”)?
Some more facts:
They are all gif-images.
They are all stored at the top-level in the project folder. (Are there a limit how many images there can be in the top-level folder? Should I create a separate folder and move the pictures there?)
HTML-code for one “missing” image:
<img src="image7.gif" alt="" style="border: none;"
border="0" />
Grateful for any input!

I would have said "Try renaming the folder containing the images in Rh's Project Manager. That sometimes fixes the problem. You can revert to the old name afterwards."
Keeping all the images, and / or topics, in the root is never a good idea. It can slow things down and it's messy.
You can move the images you can see but obviously you cannot move the others. Try moving a topic that has one of the images to a different folder and see if that refreshes. Also try deleting the CPD file and reopening Rh.
Backup first.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Some images are not loading...including yahoo logo on search pages. Firefox 8.0

most images are not showing up in browser....including yahoo logo on search result pages and icon images in gmail. I have uninstalled and reinstalled firefox.

If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images permissions.default.images
*http://kb.mozillazine.org/Images_or_animations_do_not_load
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*http://kb.mozillazine.org/Website_colors_are_wrong
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Firefox is failing to display many (but not all) images on websites that I visit, some images are shown and some are not even if they are in the same format.

I recently changed my ISP because I was having connectivity issues. In particular my router would shut down sporadically. As part of my attempt to clear issues I ran some spyware software which I've been told I could trust. Since then I have a problem viewing many websites as many (but not all) of the images are missing, even on websites that I know very well, including my own. What is very strange is that on one site every page has a jpg image under the navigation bar and all of these jpg's appear except one which doesn't appear even when I reload images. This problem also makes security sensitive sites like my bank site look very amateur which frightens me. The problem does not occur on other web browsers.

Which ''spyware software'' software did you run?
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load

In the last 36 hours my photos have jumbled within various albums. Random photos have attached at the end of an unrelated album, old photos have appeared again on Recently Added, some photos are missing but still on "collections". No date order

Within the last 36 hours my photo albums have turned into a real jumbled mess. Random photos have appeared at the bottom of my Recently Added album. In most cases it's a copy of a photo that was taken months or years ago so now it appears twice.. 200 random photos have appeared in an unrelated album. Some photos are missing completely. The date order is correct in some places and then it goes back and forth over the months and years. The "collections" appears to be okay. This morning when I went into the photo app About 50 photos that were permanently deleted 3 months ago reappeared on the Recently Added Album which I deleted again. if I delete these irreplaceable photos from the unwanted album it will delete the photo completely. Help please - this is so annoying and frustrating. I hate to think when I turn the iPad on tmoor row what else will have changed .

Quick Update:
I usually have my Mac laptop up with Messages running on it. As you know, it will receive the same messages you send/receive on your iPhone. I thought all my old photos would be there too, but they have all disappeared as well except for the last few.
Messages is supposed to archive all old photos to a directory called ~/Library/Messages/Attachments. On my mac, this was a 0 byte file that was created back in Jan 2014. As a result, none of the old photos got saved on my Messages app either. I looked at a Time Machine Backup and it has been the case since September (no earlier backups available). So, it's unclear how long this issue has been going on for my Messages app and how related it is to my iPhone problem.
In any case, if any of you use Messages, you may be able to recover your photos in that directory provided it didn't get trashed like mine did. I moved the file and created a new Attachments directory. Upon relaunch, Messages started properly storing new photos in there again.
Either there was a really terrible bug in the Apple software or something malicious has happened.
P.S. I'm running OS 10.9.5 Mavericks. There is a thread of people with this problem on Yosemite here:
No pictures are shown in Message om Mac
This seems like a pretty seriously terrible bug. I will be talking again to AppleCare on Wednesday and I hope they can escalate this.

Crystal Report: ERROR - Some parameters are missing values

          mine report it possesses a single parameter ....
          this is the example of like tries of to change the value set up in the report...
          ERROR: Some parameters are missing values
          thanks help...
          EXAMPLE:
          <%@ page import="com.crystaldecisions.report.web.viewer.*"%>
          <%@ page import="com.crystaldecisions.report.htmlrender.*"%>
          <%@ page import="com.crystaldecisions.reports.reportengineinterface.*"%>
          <%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.*"%>
          <%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
          <%@ page import="com.crystaldecisions.common.keycode.*"%>
          <%@ page import="java.util.*"%>
          <%
          try {
          IReportSourceFactory2 rptSrcFactory = new JPEReportSourceFactory();
          String report = "report/ReportParametro1.rpt";
          IReportSource reportSource = (IReportSource) rptSrcFactory.createReportSource(report,
          request.getLocale());
          Fields fields = new Fields();
          ParameterField pfield1 = new ParameterField();
          Values vals1 = new Values();
          ParameterFieldDiscreteValue pfieldDV1 = new ParameterFieldDiscreteValue();
          pfield1.setName("CICCIA");
          pfieldDV1.setValue("SELECT descrizione, validoDa, validoA FROM tariffari");
          pfieldDV1.setDescription("Query Dinamica....");
          vals1.add(pfieldDV1);
          pfield1.setCurrentValues(vals1);
          fields.add(pfield1);
          CrystalReportViewer viewer = new CrystalReportViewer();
          viewer.setReportSource(reportSource);
          // layout
          viewer.setOwnPage(true);
          viewer.setBestFitPage(true);
          viewer.setHasLogo(false);
          viewer.setHasRefreshButton(true);
          // group navigation
          viewer.setHasToggleGroupTreeButton(false);
          viewer.setDisplayGroupTree(false);
          // page navigation:
          viewer.setHasGotoPageButton(false);
          // print/export
          viewer.setHasExportButton(true);
          //viewer.setPrintMode(CrPrintMode.PDF);
          viewer.setPrintMode(CrPrintMode.ACTIVEX);
          viewer.setIgnoreViewStateOnLoad(true);
          viewer.setParameterFields(fields);
          viewer.setEnableParameterPrompt(false);
          viewer.refresh();
          viewer.processHttpRequest(request, response, getServletConfig().getServletContext(),
          out);
          viewer.dispose();
          }catch(Exception e){
          out.println("Errore " + e.getMessage());
          %>


I am facing the same problem. After selecting an export option (PDF/RTF), the same error message is coming up.
          Also, what needs to be done for displaying export option of EXCEL?
          Thanks,
          Farzal

My photos are in the wrong albums and some photos are missing all together. How can I make them go back to their correct albums?

iTunes is placing my photos in the wrong albums and some photos are missing all together. How can I make them go to their correct albums?

Nevermind. I just renamed the folder on my mac and synced it again and everything is now in its proper place.

Just bought a nano and want to download some of my iTunes library. The "Music" button shows almost all my selections but some albums are missing, yet thos albums appear on the nano icon on my desktop but none of the others. What's happening?

Just bought a nano and want to download some of my iTunes library. The "Music" button shows almost all my selections but some albums are missing, yet ONLY those albums appear on the nano icon on my desktop after being dragged there but none of the others. What's happening?
I've read some of the post here that I thought might help but they refer to titles (Music) and triangles in the "Devices" window which are nowhere to be seen when I open the "Devices" window.
I have iTunes 11.0.3 and Mac OS 10.6.8. Does this make a difference?

I should mention that, for the first problem, I do make sure that my new tracks are stored in the folder where I told iTunes that my music is in. Also, when I say the cataloging of my library stops short of cataloging all my songs, I have tried leaving the computer unattended for days (my computer's sleep mode is disabled). It always stops before cataloging all of my music regardless of whether I am doing something else while iTunes is cataloging, or if I just let iTunes be the only program that's open during the cataloging process.

CR Viewer tool bar images are missing; Export and Print are not working

Hi There
I used Crystal report 10.5(VS 2008 base crytal report -- CRRedist2008_x86.msi), i developed ASP.net application using VB.net program(i used .net 3.5). One of the pages in the application is having crystal report viewer, which is calling a crystal report to populate the result. The report is working as expected on development machine (Win Vista). Hence, I moved the application onto Server (Windows Server Web; 32Bit OS and IIS). I installed the CRRedist2008_x86.msi, which added the "aspnet_client" under default website. As my site is a made as an application under default webiste. I tried...
a) By copying the aspnet_client folder into the website folder
b) By adding a virtual directory called "aspnet_client" under my website pointing it into the folder under "default website"
None of the trials are working for me.
When I click on Print or Export buttons (although their images are missing), I get the error sigh on bottom left (status bar) of the browser and the popping up the same giving me below error details
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; HPNTDF; InfoPath.3; MS-RTC LM 8; .NET4.0C)
Timestamp: Tue, 2 Nov 2010 15:11:12 UTC
Message: Object doesn't support this action
Line: 41
Char: 1
Code: 0
URI: http://65.123.xxx.x:37188/xyzweb/(S(uhgxkx45iwlrbancwzfunp55))/reportpage.aspx
Any help in resolving this issue would be greatly appreciated.
Thank You,
Edited by: skbo007 on Nov 2, 2010 4:11 PM

Hello All.
I am excited to let you know that the issue is being resolved.
Here is steps that lead me to resolution and solution..
I installed Fiddler2 and looked into every the debugging details of the transaction while running the report.
Learned that the crystal report is using the aspnet_client foler under "Default website" NOT under the crrent website.
Hence I tried to access the image via http path from local machine
http://myserver/aspnet_client/system_web/2_0_50727/CrystalReportWebFormViewer4/images/toolbar/export.gif.
(Notice, "mysite" folder is been removed)
I was expecting to see the gif on my browsers' body. It gave me an error.
Investigated further more on the error and found that the "Managed Pipe Line" of the respective application pool is to be changed to "Classic" instead of "Integrated"
changed it .. Boom...
Tool bar is showing up with proper images and as well the "Export" and "Print" functions are working as expected..
Hope this helps to those in the same situation.
Again.. this is one of many many solutions on this issues.
Thank You
Edited by: skbo007 on Nov 3, 2010 9:42 PM

Some fields are missing in Current Task - Designer Workflow Approval Task Process

Hi All,
I am using approval task process activity in designer workflow. When i go to the single task behaviour page, some fields are missing under Current Task Source.
Some missing fields are :
1. Assigned To
2.External participants
3. Form Urn
I am trying to get the above fields but not available. What could be the issue?
Puli Bala

Hi Puli,
I think your task list is corrupted, could you please try to associate your workflow to another task list in SharePoint Designer > Click Workflows on left navigation > Click to open your workflow > Under Settings section, select another task
list and test.
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support

Hello there! i am using Adobe acrobat pro DC and using windows 8.1. Recently I was trying to convert a web page (includes greek letters) into pdf. I noticed that the conversion is not accurate, some words are missing, some are misplaced. Especially greek

hello there! i am using Adobe acrobat pro DC and using windows 8.1. Recently I was trying to convert a web page (includes Greek letters) into PDF. I noticed that the conversion is not accurate, some words are missing, some are misplaced. Especially Greek words are not accurately converted or even not converted. Please give me some suggestions to improve this issue. Regards

Hey quantum info,
Thank you for posting at Adobe forums. We would love to help you out.
Could you please let me know if you have tried converting other web pages to PDF and checked if the same issue persists.
How have you been trying to convert the web page to PDF?
Are you trying to convert to PDF directly via browsers or using "File > Create > PDF from Web Page" option in Acrobat.
Let me know more so that I can analyze where actually the issue persists.
Hope to hear from you.
Regards,
Anubha

My itunes has stoped working it says some files are missing

My Itunes has resently stopped working it says that some fiiles are missing i cannot access it and i do not know what to do

What's the precise text of the message about the files, please? (There's a few different ones I can think of that you might be getting.)

I can't install itunes 11.0.4.4 and so I can't sync with IOS7 can't uninstall old Itunes error message saying some files are missing. What to do?

I am trying to install the latest version of Itunes so I can Sync with IOS7 but I keep getting an error message saying it can't dis-install the old version Missing itunes64 files.
I tried to just un-install the old version but my computer tell me it can't because some files are missing. I don't know how to find them or how to fixx my problem. Can anyone help?
Thanks

I keep getting an error message saying it can't dis-install the old version Missing itunes64 files.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Keynote: Some images are missing

Similar Messages

Maybe you are looking for