Keynote STILL doesn't export ONE slide

I've been waiting WEEKS for Apple to fix the problem of exporting a SINGLE slide in Keynote into an ENTIRE SLIDESHOW OF PICTURES...
I get the update today... NO DICE!!!!
Are you kidding??!!??!? People have been responding to my problem so I'm not alone.
Why is Apple having such a hard time getting Keynote to export ONE slide instead of the 212 slides that my file currently has??!?!
- Very frustrated!!!!!

One way of exporting one slide is the following:
- Make sure that you're in Navigator view (View -> Navigator)
- Select the slide that you want to export in the thumbnails left
- Cmd-C
- Open the application Preview
- Cmd-N (File -> New from clipboard)
- Save as...
Does that work for you?
Cheers

Similar Messages

How to export one slide to image

Hi everyone,
I use keynote 6 and I tried to export one of my slide to an image as a .jpg file.
But it export all of my slides no matter what start page number and end page number I set.
Is there a bug or may I use the wrong ways to do it?

I asked this question a few days ago and I haven't had any answers... 72 views though so I imagine we're certainly not alone.

Movie in Keynote doesn't export properly for QuickTime

Hello all. I really hope someone can help with this. I've used the discussions before with great success so THANK YOU all for sharing your expertise.
I've got a keynote presentation that for the most part exports perfectly on QuickTime. The only part that doesn't export right are the 2 videos I've got on the presentation. I set the timing with the inspectors for it to start automatically and even added a song to play along with the presentation. But when I export it, there is about an extra minute and 15 seconds added to the whole video and I've got the presentation timed perfectly with keynote and the song. I've got iWork '09 and QT 10.0. Not pro just player.
I've played with the custom settings to no avail. Any way to get the videos to export exactly to their lengths?
Cheers

I don't know if this is the answer you're looking for but I'll share my experience. Like you, I have three videos in my presentation. Once I exported it as a QT movie, the delays that I built in with the Inspector to allow the movie to play before the next slide transition, played AFTER the video ran. I went back and just put in a 1.5 second delay in and the videos run fine. I'm guessing that QT sees the video and allows it to play and THEN looks at the Delay setting.
Now if someone can just tell me how to get the audio soundtrack to shut down during my three videos but play during the rest of the presentation...

Keynote is only exporting the slides that have narration on them? help?

Hello, I am using keynote 08 ad I have 20 slides. I put narration on the first 3 slides. When I export them to Quicktime or Flash it only exports the 3 slides that have narration and it doesn't export the remaining 17.. Does anyone know what I need to do? any suggestions?
Thanks
Jon

When using Messages between iPhones with IOS 5 (provided you have in Settings > Messages > iMessage > ON and Receive At > your phone number), your text should appear in a blue bubble because it's delivered by Apple server whereas green is normal SMS delivered by your cell carrier.
If in Messages conversation list you only sees her number instead of her name then there something not configured correctly on her end.
Do you have her contact in your Contacts app? I supposed you do.

Keynote (iPad) - Slideshow of multiple images on one slide

is there something similar to the osx keynote-action where you select a bunch of images of different sizes, apply an action to them such that they are uniformly resized and cycled?
how can that be achieved on the ipad?
cheers, heinz.

dear bwfromspringhill,
i have several osx-keynote presentations which extensively use that 'slideshow on one slide' action which, as you mentioned, doesn't work on the ipad. when copying these presentations to the ipad, such slideshows are transformed into animations where each image gets a fade-in along with a fade-out property. (since i am using the german version, i don't really know the exact names for those properties, but i am sure you'll know what i mean.)
however, those transformed slideshows most of the time get messed up somehow, positions of images change and also masked images are displayed incorrectly.
it would help a lot to have an easy workflow for quickly producing such slideshows directly inside keynote for ipad. say, i have some imported images of varying size and define transitions between them. the problem: when resizing and masking them to a common size (hard enough on ipad), moving them one on top of the other will make it impossible to select one after the other in order to assign the fade-in and fade-out transitions. i would have to do that before the resizing, but for 10+ images that's real cumbersome....

When I launch I photo it wants me to choose a library but it doesn't find one which is impossible, because i still have no storage. before i can clean up i want to back up them. how can i find my library?

When I launch I photo it wants me to choose a library but it doesn't find one which is impossible, because i still have no storage. before i can clean up i want to back up them. how can i find my library?

You may very well have damaged your library - or even your system by not having adaquate storage available
And never select all of the pitcture and move them - that will destroy your library - the iPhotolibrary is a SQLite database and must always be kept intact as a single entity -
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

How to select more than one slide on Keynote?

Please, someone knows how to select more than one slide on keynote for IPad?

// Allow selection to span one contiguous set of rows, visible columns, or block of cells
table.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION);
// Allow multiple selections of rows, visible columns, or cell blocks
table.setSelectionMode(ListSelectionModel.MULTIPLE_INTERVAL_SELECTION);

How can I export a slide from Keynote to iMovie HD?

I've tried to export a slide with animation into iMovie HD. The settings I'm using are 320x200, frame rate: 30 fps, Progressive, 16x9, Data Rate: Automatic. When I export and import into iMovie Hd the resolution is blurry and grainy.
I initially tried to build a title sequence in Keynote. The title sequense transitioned into a quicktime movie clip, transitioned into a title sequence. The audio portion worked to time but the video output was increased by :30 seconds and was out of sequence. I played with the settings and deleted the preference plist for iWork, but the timing never worked in Keynote.
The timing works in iMovie Hd, but I the titles are grainey and poor resolution.
Any thoughts?
Thanks,
Jeff

The source is DV 16:9. I've adjusted the resolution to 360:202 and compressed with Sorenson to a QT 512 streaming clip. The resolution is very good and I don't have any issues with the video. I've imported the video clip into Keynote and assembled the title sequence. It looks good with no blurring or choppiness. The problem comes when I export. The timing goes off and the length of the entire video clip is increased. I've also had problems with Keynote when exporting. It seems to be inconsistent and will drop the last title, even though the preview worked fine. I've worked around the problem by importing the title slides with out the transitions and then going into Final Cut. I'd like to keep the title transitions that I had in Keynote . Any thoughts? Thanks, Jeff

Keynote 6.0 doesn't export individual images

Keynote 6.0 seems to disregard any parameters you set when exporting individual slides as images. It just exports the entire presentation. This feature always worked fine in Keynote 09. Any tips, anyone?

I have found out that you can drag and drop a slide with a different theme from a newly created presentation into your current presentation and Keynote'13 will allow both themes to coexist. Hardly something that I would like to do on a daily basis but a workaround nonetheless. Hopefully Apple will put somebody to work on this at some point.

My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls

My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls
i have tried manythings but it doesn't work
i put it in silent mode and i found my calls comes normaly and it works good but when i turn on ring mode it's back as it how can i fix that ?!

Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device. Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.

I lost an Iphone 5 and got a new one on the next day by mail but it still doesn't work, what I need to do to activate the phone?

I lost an Iphone 5 and got a new one on the next day by mail but it still doesn't work, what I need to do to activate the phone?

Let's ensure we get this new device up and running, 123Vika. I know the importance of having a functional device. I have some great news you can activate the device directly from My Verizon. Take a look; http://vz.to/1gdvahs
YosefT_VZW
Follow us on Twitter @VZWSupport

Can I export (burn) more than one slide show to the same DVD

Can I export (burn) more than one slide show I created in iPhoto to the same DVD, and if yes, how?

Yes. If you're using iDVD export the slideshow out of iPhoto at 480p size and drag it into an open iDVD menu window, being careful to avoid any drop zones. iDVD can handle up to 120 minutes of playing time (movies plus menus) on a single layer DVD disk.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

When I try to export PPt slides to iPhoto, it doesn't work. Why?

After downloading iosx, whenever I try to export PPt slides (2011) to iPhoto I get the message that I need a newer version of iPhoto (6 or newer).

Does your PP presentation have anhy animation or music with it? If so you'll need to export it as a QT movie file and add that file to iPhoto.
If there is no animation or music or you can do without them try this: Here's how to get the slides into iPhoto as a jpeg file:
1 - in Power Point go to the mode where all pages are thumbnails and select all of the pages.
2 - type Command+P to start the print process.
3 - click on the PDF button and select "Save PDF to iPhoto".
NOTE: If you don't have any of those options go to Toad's Cellarand download these two files:
Save PDF to iPhoto 200 DPI.workflow.zip
Save PDF to iPhoto 200 DPI.workflow.zip
Unzip the files and place in the HD/Library/PDF Services folder and reboot.
4 - select either of the files above (300 dip is used for photos to be included in a book that will be ordered).
5 - in the window that comes up enter an album name or select an existing album and hit the Continue button.
That will create a 200 or 300 dpi jpeg file of the item being printed and import it into iPhoto.
OT

Keynote doesn't export in Quicktime

Hello!
I have a problem with a Keynote file: I must show this presentation on PC and so, I want to export it in Quicktime (because there are many animations and hyperlinks).
But, if I export it, I get the error message, that the Keynote file cannot be exported in Quicktime, because the volume hasn't enough disk space or there is a problem with the file.
I have enough disk space (more than 75 GB) and all my files, which I imported to Keynote, are okay.
Can anyone help me? Because I can't find any solutions at the Apple homepage or other websites.
Thanks!
Message was edited by: LadySue

I've also had this problem in the past, but based on the suggestion of another member of this forum I tried exporting my presentations using the Custom settings menu and then selecting MPEG-4, 30 Frames per second, and Best quality. The presentations have exported perfectly.
Good luck.

Can I record everything in just one slide?

Hello,
I’m trying to create an 30-second flash animation of
our software, with some textual callouts. Since I’ve got the
Adobe Technical Communication Suite, I figured I’d use
Captivate for the job, but I’m new to it and can’t get
my head around some things. If someone has the time to point me in
the right direction, I’d appreciate it. I have tried checking
the help and rummaging through forums, but still can’t get it
to work the way I want.
I’m using the “Full Motion Recording” mode,
since our software is pretty interactive in real-time and I want to
show that. All I want is to do is record about 30 seconds of me
using our software, and afterwards add text callouts here and
there, before exporting to an .swf file.
Question 1: Captivate automatically chops up my recording
into several “slides”, is there a way to make it put
everything in just one slide? Or set the default time of a slide in
order to get my entire recording in one single slide? The problem
is, if I want to place a callout just between two slides…
well, I can’t do that right? I just want one and the same
timeline for my entire recording.
Question 2: After the recording is done, is there a way to
adjust the speed, or pause, certain segments of the recording? For
example, if I realize that the viewer of my flash video needs a
couple of seconds longer to read a certain callout, I want to
“pause” or “extend” that point in the
timeline for a bit. Can I do that, or do I need to record the
entire thing from the beginning and actually pause myself at the
appropriate time?
I’d be thankful for all advice and suggestions. I
realize I’m new to this, so any nudges in the right direction
would be appreciated!
/Tom

Hey there Tom
From my experience, the only time I need full motion is
during a drag & drop or scrolling type of action when the view
"moves" like a film.
My suggestion is that you plan what you want to do (click
here, then there, then select that button etc.)
Step 2 is to start a new project and select "Demonstration"
as the recording type, spec the size of the recording window if
needed and start recording (You might want to use auto capture
which would automatically record all interactions and key strokes,
but please remember to "manually" capture certain screens using
Print Screen e.g. after a drop down menu has opened.) (Hint 2 -
Rather record too many screens than miss one critical one out)
Step 3 would be to stop recording and edit the individual
slides with captions, animations etc. At this stage, you can
specify exactly how long each screen would display, when your
captions etc appear and for how long they show.
In summary, a decently built demo has a seperate slide for
each change in what the user would see on the screen, with FMR
being used to "tie together" 2 views where a movement action causes
the transition.
Hope this helps
Andrew

Keynote STILL doesn't export ONE slide

Similar Messages

Maybe you are looking for