Keynote storing obsolete format data, and possible connection to crashes

An “Ah ha!” moment with Keynote leading to a question about how it stores information regarding themes and fonts, and whether this is a bug in Keynote and/or if there is something that end users can do as a work-around. These points came to my attention today when I exported from Keynote to PowerPoint to share a (very inferior ) version of my presentation with a colleague. Note that the Keynote file I exported from has not exhibited any problems related to error messages or crashes.
(1) Prior to making the export, I changed all slides to Keynote’s standard out-of-the-box “Gradient” theme since I had used Keynote Theme Park animated “Global Cool” theme (www.keynotethemepark.com). However, even though no slide any longer contained the KTP theme, in doing the export Keynote created a media folder of movies that contained the animated KTP theme. So Keynote is apparently storing obsolete file data and not cleaning up its house after the file is changed.
(2) Prior to making the export, I changed all slides to use only fonts that I knew to be on my colleague’s PC. However, when I looked under the “Contents” tab of the resulting Powerpoint file’s “Properties” info, I discovered that Powerpoint was listing all the fonts that had been in the original Keynote file but that I had long since changed to Arial and Arial Narrow. Checking through the Powerpoint file slide by slide confirmed that the original fonts do not appear. Again, it appears that Keynote is storing obsolete information.
MY QUESTION: I am wondering if what I discovered today about Keynote’s “elephant memory” is indicating a bug of some sort, and if so, is there a reasonable work-around for end users that will enable us to avoid having files bloated with obsolete data.
Also, I am wondering if this storing of obsolete file data could be related to the ”missing file” error reports and Keynote crashes that others have noted in this forum and that I addressed in my previous post. The solution I had discovered was a file level work-around, but the question remained as to what had brought it on.
BTW, this is with Keynote 3.0.0 because I reinstalled Keynote recently thinking that this procedure might resolve the crashing problem described in my previous post to this forum; the reinstall didn’t, but the problem was solved at a file level in the manner described in my previous post. Now that I finally have time tonight to upgrade again to Keynote 3.02, when I run Software Update expecting to see the Keynote 3.02 upgrade listed, it’s not there. Hmmmmm.… I know I can get it from Apple’s download site but since the site lists two downloads (3.0.1v2 and 3.0.2), I thought it’d be better to let software update manage this process. Now I’m not so sure.

Thanks, dook and Kyn. Not only does that seem to resolve the issues, but deleting unused master slides dramatically drops the size of the exported presentation (e.g. to 20%).
I wish the Apple Keynote team would provide a way to more intelligently delete unused themes so as to make it easier to email presentations. It seems to me that theere should be a setting available in the export process where one could do this. The only way I could see to do it was one master slide at a time. Please tell me if I am missing something here.
I also wish we could export just a range of slides, e.g. from # to #, or slides selected in the Navigator/sorter/organizer.

Similar Messages

  • Form Letter Report - How To Format Date and Number Hidden Fields

    Hi
    Is it possible to format date and number fields in a form letter report. This case were Paper Design shows fields as $<hire_date>. The examples in reference book only print character values which do not require formatting. I cannot determine how to achieve this. Cannot select fields from Paper Design view as per other report styles where can apply formatting. Do I have to perform formatting in the query to return date as string in format I wish for? This is not case for other report styles.
    Thanks

    you could add a field, set the source of the field to hire_date (assuming hire_date is a column in the data model), and put a format mask of whatever format you want. then set visible to No.
    then instead of &<hire_date> you can instead type &<name of your new field>.

  • Do we need to format data and log files with 64k cluster size for sql server 2012?

    Do we need to format data and log files with 64k cluster size for sql server 2012?
    Does this best practice still applies to sql server 2012 & 2014?

    Yes.  The extent size of SQL Server data files, and the max log block size have not changed with the new versions, so the guidance should remain the same.
    Microsoft SQL Server Storage Engine PM

  • Convert XML string into an abap format date and time

    Hi,
    Does anyone know of a method or a function module in ABAP which converts XML string into an abap format date and time.
    Here is a part of the xml that I want to convert.
    <ns2:EventDateTime>2009-07-02T10:13:45+10:00</ns2:EventDateTime>
    <ns2:EventMessageTransmissionDateTime>2009-07-02T10:13:45.987+10:00</ns2:EventMessageTransmissionDateTime>
    Currently EventDateTime and EventMessageTransmissionDateTime are type XSDDATETIME_Z and these are converted to proper dates and times. We will be changing these fields to a STRING instead of XSDDATETIME_Z. The reason for this is to make the field more versatile. The customer would be receiving dates with Zulu (2009-09-23T12:00:00Z), with offsets (2009-09-23T12:00:00+10:00/-10:00) and just local timestamp (2009-09-23T12:00:00). With this, we need to make the date fields as string
    to be able to accept the various date formats (esp. the local timestamp).
    I am looking for a standard function module or method that will convert the xml string to a proper date and time abap format.
    Would appreciate anyone's help!
    Thanks.
    Edited by: eunice ocson on Jul 13, 2009 1:49 AM
    Edited by: eunice ocson on Jul 13, 2009 1:50 AM
    Edited by: eunice ocson on Jul 13, 2009 1:51 AM
    Edited by: eunice ocson on Jul 13, 2009 1:51 AM

    Hi Eunice
    Use the FM 'SMUM_XML_PARSE'
    for more info
    [Convert XML string to ABAP|XML String to ABAP or GUI]
    hope it helps you.
    Thanks!!

  • Date and time control panel crashing

    why is date and time control panel crashing?

    I haven't noticed that in iCal. I don't normally use a 24 hour clock.
    Glad to help on the other, though.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Save data and tcp connection

    Hi,
    I have a connection between a measurement roboter and LabVIEW. I transmit the data above an TCP connection (for example the coordinate plane of the sensor). I have different ports to transmit the data. Is it possible to save the transmitted data and the TCP number of the Port?
    Attachments:
    datasend.vi ‏20 KB

    Hi,
    Just use the:
    >
    Regards, Christian

  • How do i format date and time in SSRS 2008

    Okay, so i am working with SSRS 2008. I am formatting the date and time. Right now the current out put is 1/13/2014 8:02:11 AM. I want the output to
    be 1/13/14 8:02 AM. What is the expression for this? 
    Thanks in advance

    There are 2 functions that can be used, Format and FormatDateTime.
    http://www.jackdonnell.com/?p=122
    "You will find a fortune, though it will not be the one you seek." -
    Blind Seer, O Brother Where Art Thou
    Please Mark posts as answers or helpful so that others may find the fortune they seek.

  • Formatting Date and Time in Smartforms.

    Hello,
    I'm a newbie and I'm working with smartforms.
    My requirement is to get the following format of date and time in a text within a template.
    'MMM DD HH:MM'
    Like : Jan 01 12:45
    I have tried SAPScript Commands like 'SET DATE MASK' but that doesn't appear to work.
    Do I have to use a Function Module?
    Please help out. A sample code will be appreciated!
    Regards & Thanks,
    Arun G Nair

    Hi,
    please see this code
    DATA: V_DATE1 TYPE STRING
    SELECT SINGLE LTX FROM T247
       INTO MONTH_NAME
       WHERE SPRAS = SY-LANGU
       AND MNR = SY-DATUM+4(2).
    CONCATENATE MONTH_NAME  SY-DATUM+6(2)  DATE1(4)
        INTO V_DATE1 SEPARATED BY SPACE.

  • The packet data and wlan connection runs automatia...

    guys guys guys i'm having a wiered problem with this rubish E72
    well every time i check my log i find that my phone has used packet data connections and wlan connections for small time intervals and small periods while i haven't used the internet for a long time btw i always make sure to exit all app and also make sure to disconnect my email before exiting so packet data signals and wlan signal are not (on)
    so that means that the phone just uses internet by it's own self also notice that the time that the phone used the internet was during my sleep time
    but it's so weired it has used the packet data for 30 seconds and the wlan fo 1.5 mins by it self ..............is this a virus or that ugly firmware is just full of **bleep**
    please check your phones (log) and reply me back
    thank you
    Nokia E72-1 Black
    firmware : 053.001
    of 26 of nov 2010

    well for the  ovi sync i really use that app to sync my contacts and calender and it set to manual sync so i guess it wouldn't go by it self
    as for the wlan data and packet data , last night was ok withou any connection don't know how
    or what happened it seems the problem is solved but i will also make sure tonight of the problem still exist or not
    all i did last night i have installed 2 app (m.gaurd(netqin) and kaspersky antivirus) to scan my mobile and it did but it seems that its slowind down my already slow mobile
    and removed them today because they corrupted the interface of my snaptu application which i use for facebook (the highlight color disappeared but it was still working) so i had to uninstall it and reinstall back again
    Nokia E72-1 Black
    firmware : 053.001
    of 26 of nov 2010

  • How to format date and currency datafield in a Datagrid

    Hy folks
    I am getting my data from a web service (against a SQL server)
    After that convert the data in an ArrayCollection and
    Finally I use the ArrayCollection in a Datagrid ussing somethig like :
    <mx:collumns >
    <mx:DataGridcolumn datafield="EnvoiceDate" />
    <mx:DataGridcolumn datafield="EnvoiceValue" />
    How can I format a date tipe datafield in a Datagrid.
    I need to display da date in an format like  DD/MM/YYYY   ex     12/10/2009.
    I also need to display da number like 1345.87   as  1.345,87
    thanks in advance

    Binoy,
    create fields that refer to DATS and TIMS data types
    Thanks
    Bala Duvvuri
    Edited by: Bala Duvvuri on Aug 5, 2010 10:28 PM

  • How Text Messages Are Stored on Palm Centro and possible recovery

    I come from an extensive IT and programming background with emphasise on databases.  I need some high level understanding of the text messaging system on a Plam Centro system with ATT.
    Questions are related to Recoverying Deleted Text Messages
    1.  Do all incoming and outgoing messages get written to the messages_database.pdf on a Plam Centro (ATT)?
    2.  When a message is deleted, would it be correct to say that the message is not physically deleted but just that a record pointer in the database (messages_database.pdb) is reset so the messages appears to be deleted?
    Why I ask, is that I see a many many requests for people (myself included) of wanting to recover deleted text messages. (i.e. my 16 daughter will not email now becuase we check email but she does text unknown people constantly and it makes it very hard to keep her safe).  When she syncs her phone with her computer, the messages_database.pdb file is in the backup directory and if you open it with a text editor (notepad.exe) you can see only messages that have not beeen deleted.  She usually deletes all her text messages.  There is A LOT of extra data that appears to be encrypted and is not readable.
    Is it possible that the text messages are there but just that the database record pointers hve been reset OR are Plam text messages written to RAM some how; although that does seem to be the case, since when you sync, the messages_database.pdb files has any and all messages that have not deleted.
    It woul be VERY valuable (and I think profitable) if someone very high level knowledge of the messages_database.pdb file could write a PC application that would alloow you to undelete the text messages.  I know there are programs out there that can do this on SIM cards on systems that write the text messages to the sSIM card, but it is my understanding that messages are not stored on the SIM card but in RAM.
    Can any high level technical Palm programmer shed some light on this for me and let me know if there is a way to recovery deleted Text Messages on a Palm Centro?
    Much Apreciated,
    Greg
    Post relates to: Centro (AT&T)

     I    had the same problem.
    1.Search for a program call filez.prc (give your address I can send you) copy it to a memorycard. btw [email protected]
    2. Copy it to the palm device(it works on any)  activate the program on the palm chk rom at the top and chk all message database and smstxt and also some have 0000behind em.  note the sizes as the older ones are larger and copy them to the card.
    3. to view em use microsoft word and use recover txt from any file I think it is called. You will be able to see detail but be careful as it sometime displays truncated or mixed but you will be able to see most txt clearly. 

  • Storing Footage on Data DVD possible?

    Hi all,
    I have a ton of mini-dv tapes with footage. I plan to keep these, but i am wondering if it's possible to transfer them onto DATA DVD's for another, more easily accessible, storage alternative. My plan would be to sort them by year, event, etc. and then place the video files on data DVDs once they are all categorized. Then when i plan to edit a video of something, i can go to that DATA DVD and access the footage i need using something like Mac the Ripper... It would seem so much more organized than having to hook up my camara and search through tapes to find the footage i need.
    Is it possible to do this? I'd really appreciate any advice you have to offer.
    Thanks!!
    Karen

    I had a feeling this would be the answer I'd get. My brother called me this morning wanting to know if he could do it this way. In the past, i've always read that dv-tapes were best for storage while DVDs are best for pure viewing. This is why i have all my tapes labeled meticulously! That way i can find what i need when i want to edit something together.
    He didn't care about how many DVD's he would need to do it. He's loaded!What was most important was the organization part of it...being able to put videos into files and store them that way. Didn't sound like such a bad idea, so i thought i'd ask...
    He really wants to be able to put his tapes away somewhere and convert everything he needs into digital format. It would be nice if there was some way to do that without losing quality. I give it a few more years... they'll come up with something!
    Thanks!
    Karen

  • Formatting dates and return date type

    Hi,
    I am working with SQL Server 2012 with English(United States) language set, it's not posible change this parameter.
    If I execute this sentence
    declare @d
    date='06/22/2015'
    select @d
    Response:2015-06-22 (yyyy-MM-dd)
    I want to obtain 22-06-2015 (dd-MM-yyyy) with type date.
    I have tried with format(@d,'dd/MM/yyyy') and convert(varchar,@d,103) but these functions return varchar and after the order in Excel doesn't work about date.
    I have tried too
    declare @dvarchar(10)='22/06/2015
    select parse(@dasdateusing'es-ES')asResult
    The response is the same
    Response:2015-06-22 (yyyy-MM-dd)
    How can I obtain "22-06-2015" in data type?
    Thanks,

    I want to obtain 22-06-2015 (dd-MM-yyyy) with type date.
    A data of type "date" don't have any format as it, it's just a (internal numeric) value; it's always the frontend which format's this value.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Any Date and Time Connection Problems?

    My clock doesn't setup properly at startup, all the time. Do I just need a new PRAM battery? I believe it happened on my Quicksilver, too ... that's why I ask below about the Server. I did get my Quicksilver off eBay ... so it might need a battery, too.
    Or is Apple's Time Server having periodic problems? or do I have DSL timing issues?
    I am running OS X 10.3.9 on an XPostfacto PowerPC 9500. Shouldn't matter, software wise.
    Mac Plus, Performa 6116, PPC 8500, 9500, QS 2@1GHz   Mac OS X (10.3.9)  

    Mine are PPC 9500 G3/500, PPC 8500 G4/450, QS Dual 1GHz
    I still think there is a problem with Apple Americas ... I got the correct time and date with Apple Europe, and the same bad result from Apple America. My zone is set correctly.
    So, I've gone totally Euro.
    Thanks.
    Mac Plus, Performa 6116, PPC 8500, 9500, QS 2@1GHz Mac OS X (10.3.9)

  • Default format pattern for Date and Number

    Hi everybody,
    I'm finding it very hard: my java app runs on Tomcat 5.5, I'd like to format dates and numbers with a specific format. For example: with Locale it_it date format is "dd-mm-yyyy", my wish is to display "dd/mm/yyyy" without changing the Locale (it_it is correct). Is there an env variable to set?
    Thanks.

    gianoele wrote:
    How cai I set with a proprerty? Like -Ddate.format="dd/mm/yyyy" -Dnumber.format="###.00"?You could do that.
    Then fetch it from your app and feed it to SimpleDateFormat.

Maybe you are looking for