Keynote to quicktime movie no sound?

I have a keynote presentation which consists of several embedded video clips. When playing this presentation live to my class there is no problem at all and everything functions perfectly. When exporting to QuickTime to put on my classroom website, the sound for the first clip will play, but subsequent clips have no sound. Ideas? Alternately i can make a screencast video of the presentation using ScreenFlow and the audio comes through fine, but it requires me to sit and click through the presentation then edit the darned thing. The QuickTime export is automatic, which is really handy. Each video is on its own slide, if that information helps.

I am not running this on an intranet, I am creating a video for my students and posting it to my Internet web page. So if I were to post the keynote file itself, 4/5 of my students would be unable to open it because they don't have Macs. Some do not even have desktop computers and view stuff on their smart phones. I solved the issue, at least partially, by saving the presentation as html and posting it to my site that way. It works but it is a bit buggy. Would still rather make it into a movie.

Similar Messages

Keynote to quicktime movie to iDVD, no sound on dvd

I know this has been asked a million times, however I (a relatively recent Mac convert) absolutely can't believe that Apple would not allow this to work.
I have a keynote slideshow with music. I "send to iDVD" as well as "export" into a quicktime movie. Resultant files are movie and soundtrack. I bring into iDVD. Sound plays in iDVD. Burn dvd from iDVD, no sound on dvd.
C'mon, the instructions are there, the menus are there. Apple can't expect us to "import into iMovie, match movie and soundtrack" or "burn using disk utility" or otherwise do anything other than take a keynote and make it in to a dvd.
Worst case, can I just burn a CD or DVD that automatically plays the keynote with sound and doesn't have the cool DVD Menu?
Again, sorry for the "same old question", however I have not found a fix that worked nor do I believe that Apple means for this to be so difficult.
For those experts out there that have seen this question before, I really have spent a significant amount of time researching the problem and haven't found a fix that worked or an official response from Apple.
Thanks again.

I am not running this on an intranet, I am creating a video for my students and posting it to my Internet web page. So if I were to post the keynote file itself, 4/5 of my students would be unable to open it because they don't have Macs. Some do not even have desktop computers and view stuff on their smart phones. I solved the issue, at least partially, by saving the presentation as html and posting it to my site that way. It works but it is a bit buggy. Would still rather make it into a movie.

Exporting Keynote to Quicktime movie with audio

I am struggling to get this to work although I have done so previously. I have a fully functioning keynote with an embedded quicktime movie and an audio file. The Keynote works fine.
When I try to export it I just get the audio file!! I am opting for 'manual' even thought the Keynote is a looped production without the need for any manual input.
Any ideas? thanks

Exporting to Quicktime with sound seems to have been restored ok in Keynote 09 as I have just tested it on the trial download copy. Up until then I have been importing into Garage Band without sound and adding it there which is successful but I think the quality of picture is better with only one step i.e within Keynote itself.

Keynote to quicktime movie has wrong aspect ratio

I have created some Keynote Quicktime movies. When I import them into iMovie, they become too tall and wide to see the pictures. How can I change the aspect ratio (I want to use 16:9) and/or the height and width of the slides to be seen properly?

Hi David, I know this was discussed in you posting already but I just wanted to make sure I had it clear. I have a 4:3 film and I've exported as a quicktime movie with current settings, which should be 4:3 and found that the image when played back in quicktime, looks horizontally stretched. Almost as if quicktime is trying to play it back as a 16:9 image. I think this is the same issue the other fellow was having but I just wanted to be clear. You're saying that the 4:3 image distortion is perfectly normal when played back in quicktime on a computer screen and that the export will look fine when put to DVD or sent to a monitor? I just wanted to make sure because this problem is freaking me out and I don't want to deliver a distorted image to my client. Could you also explain briefly why this happens with quicktime export and not quicktime conversion and what causes quicktime to distort the 4:3 image? Any advice or help would be greatly appreciated.
Cheers,
james.

Quicktime movies playing sound with no picture (only in firefox)

Hi There,
I'm having a weird issue with quicktime in firefox on apple macs. I'm not really familiar with macs and I was wondering if someone can offer a solution? When I visit the page in firefox on a mac the video plays sound but not the picture. This seems to happen to all firefox browsers that I have tested.
I have a test link here for people to look at. http://www.wellcom.net.au/quicktime.aspx

To Apple Discussions!
Thank you for providing the link for others to test for you. A got a flash video which I had no problem viewing with sound. The picture did take a few seconds to appear. However, the sound came in right away. Here is the direct video link: http://www.wellcom.net.au/images/movingimages/BookCity.mp4
Picture & sound was instant from the .mp4 link.
Make sure you have the latest versions of Adobe Flash Player Software, repair permissions & restart your computer.
If the above does not work, then please advise which version of FireFox you are using?

QT Plug-Ins (XviD Codec 1.0) Trying to play a quicktime movie with sound?

I have a movie I downloaded and cannot hear anything? I got a drop down pane telling me I needed a plug in so I downloaded "XviD" I read the read me file and placed the component in the proper place, I think Library/QuickTime and movie still does not play. I don't understand what I am doing wrong. please help and thanks in advance.

Firstly, ~/Library/quicktime may be case sensitive. (where ~ is your user's directory)
I downloaded XviD components from here http://n.ethz.ch/student/naegelic/download/ , along with the preferences app (same download).
The A52Codec can be found here http://trac.cod3r.com/a52codec .
Other codecs can be found on this list http://n.ethz.ch/student/naegelic/links/index.php .

Help playing my quicktime movie on keynote

I have a movie on quicktime. It plays perfectly fine when played through quicktime.
I am making a presentation using keynote. I want to make one of my slides that movie. So I do exactly as I have been reading. Ok, so the movie is now on the slide, but all I see are the little white squares around it, no actual movie. Those same white squares that you get when your trying to move or select an item for edit. Anyways, I say well maybe it will play when I play my slide show. Still no movie. Sometimes I get a blank page when I get to the slide with the movie. Other times I get the actual control panal to play the movie, but yet not movie is playing regardless of how many times I rewind, and play etc.
Can keynote play quicktime movies? If so what is the format they have to be in. The format of the movie in quick time is
Apple Animation, 983 x 552, Millions+
Please help, I really need this movie for my presentation.

In the Inspector section find the Transitions controls. For that slide, select the delay time for the same length of time of the clip.
Not sure if that will solve it but it's worth a try. That's how I got my QT clip to play.
Good luck.

Safari cant watch quicktime movie

I can t watch any quicktime movie only sound?? i try to change the settings and still not working, it only happens with Safari because i used Firefox and i can see the video... so its a Safari issue how can i solve this..
By the way I'm using Leopard with the new Safari

I had the same problem and tried all the suggestions and fixes. Non of them worked until I tried the below post. After I implemented it all the sites I previously had trouble with now worked fine and no more "Q?". Worked like a charm!
instructions, posted by Stormincher in this thread:
http://discussions.apple.com/thread.jspa?threadID=1247725&tstart=0
1) Open the folder Macintosh HD/Users/your_user/Library/Preferences
2) In this folder, search the file com.apple.quicktime.plugin.preferences.plist
3) Open it with Textedit
4) Search for this string (without the quotes) "<key>application/x-shockwave-flash</key>"
5) On this section, change the "<true/>" string to "<false/>" (without the quotes)
6) Save and quit Textedit
7) Relaunch Safari and ENJOY!!!!

Interactive Quicktime Movie Events (Keynote)

I'm developing an AIR app that lets the user play a quicktime .mov from their computer. This movie will most likely come from an exported Keynote presentation.
In case you're not familiar, Keynote lets you export a quicktime movie that is interactive... it will automatically pause after each transition and you can click anywhere on the movie to make it continue to the next slide.
In the flash VideoDisplay component it plays right through these "pause points" instead of stopping automatically.
Is there any way to have quicktime movies automatically pause at those points? Or is there a way to at least get a callback when they're supposed to happen so that I can pause it manually with actionscript?
I know it sounds far fetched, but this would basically let you play a keynote presentation inside flash.

Welcome to the discussions, Christopher.
Over in the Keynote discussions we've been going over this for quite awhile. Unfortunately, there's no easy solution to your problem. I've even gone as far as attempting to preload the chapter track thinking that might solve the problem, but it doesn't work.
One thing I don't think I've tried is setting up the first slide to advance "on-click" so that there's no animation before the first transition. The problem, of course, is that there's no "loading" animation to let it know when it's ready to go.
Another thing I haven't tried but that might work is to create the movie so that it doesn't autoplay, and then, using the embed commands, set autoplay to be the full length of the movie (so that it will automatically play, but only after it's completely downloaded). Look here for the autoplay embed commands.
http://developer.apple.com/documentation/QuickTime/Conceptual/QTScriptingHTML/QTScripting_HTML_Document/chapter_1000_section3.html

Exporting Keynote to Quicktime - complete loss of sound

Hey,
I’m facing problems when it comes to exporting Keynote to Quicktime.
For a tutorial, I recorded a Quicktime movie of my screen (including my voice as audio). This Quicktime movie is placed on a slide and runs during the whole presentation. I use animations for showing text blocks that give additional info while the movie is running.
In Keynote everything works just fine. But when I export it to Quicktime, *the sound stops as soon as the first animation is started with a click*. From then on I can see both the embedded Quicktime movie and the animations but without audio.
Sometimes it even happened that after doing the first click I could see the animations only, but no Quicktime video / sound.
I’ve spent the last nights with trying changing export settings and so on, searched this forum up and down, but couldn’t find a solution…
Any suggestions?
Thanks, Mike

I just posted this on another similar inquiry. THis may help. I posed a similar question so check the thread "Bottom line...etc." If you follow the guidelines below it should work. The final result is one QT movie with all slides and music. The product was so much nicer than the iPhoto slide shows (although they are OK too. (I don't know about the video in the Keynote might work as described in the initial post here.)
Here is what the final answer was, at least for my situation:
"YESSSS!!! Even after meeting with 4 Geniuses and 1 Creative the answer was still a definite bottom line, "Maybe." Until, I finally realized that the one setting that I was not using correctly was in the Export> QT> Playback. I had been using "Manual" and not using the "Fixed Timing" out of fear that it would change the custom settings that I had on each slide. However, that is not the case. The settings on each slide remain the same even though in this option there are settings for slide duration and build duration. I do not know what those options do but the bottom line is I now can Export to QT and then import to iDVD with both sound and video as one file and they work fine both as an isolated QT file as well as a QT/Slideshow in iDVD. Thanks for the help from all the contributors both recently and quite awhile ago when I first faced this challenge.
Peace,
Jim

How can I update a quicktime movie placed in Keynote, that has been modified outside of Keynote??

HI! I really like Keynote for quicktime playback during a tv/film shoot, and use it frequently on set.
Media assets change frequently though, and it would be nice if the movies I place would update along with the external source.
How can this happen in Keynote? Seems like even if you save the file without copying audio/video into document, it still somehow references the initial placed movie.
Thanks for your help solving this problem, would be great if this app worked like every other app that imports external media.

That's a shame. It takes some tweaking, but PowerPoint can do this. I know it's not something that is needed all the time, but it's something I've needed on a few occasions. I wonder how well the timing would work out if I broke the video up into sub clips and simply assigned a clip to each slide? It's a lot more work and I suspect I'll pick up some clips and pops during the slide changes.
Keynote is still far better at what it does than PowerPoint, but do I ever wish it could do this so I could really show it off to people.
Thanks for the reply!

Quicktime Export - Keynote, Streaming, and Movie Controller Settings

A few questions regarding qt export from keynote -
Is there a way to save quicktime export settings in keynote? Right now I'm exporting multiple files to custom sizes, and have to manually enter the size every time.
I'm exporting for streaming as well, and have to select it in the qt settings window every time.
also, is there a way to choose to show the movie controller when exporting a movie? Now I have to open the movie after export in qt pro and choose window>movie properties>presenation>movie controller type>movie controller (it defaults to none when exporting from keynote).
also, oddly enough, is seems that saving the movie after choosing to show the movie controller removes the streaming setting (movies wait to load completely before playing).
Thanks!

No answer to the main question...but the final question--
When you edit a QuickTime movie, even if the edit is merely to change the settings on the controller, it breaks fast-start. You should be able to fix it by doing a "Save As..." instead of saving the movie in place. But that doesn't seem to work in all versions of QuickTime; I have noticed that certain versions of QT-7 seem to break fast-start altogether.
There is an app out there called "Lillipot" that will fix this for you. Drag your movie to Lillipot, it does whatever magical conversion is necessary to make fast-start work again.

QuickTime movie in Keynote 3 want to export Keynote as QT

So I have a Keynote presentation. It is mostly images but 3 slides play small Quicktime movies. Interviews I did on DV, converted to 320x240 using Sorenson V3 and IMA 4:1 audio. In Keynote 3.0, they now have controls. They play great.
But I need to export the presentation so others can use it without keynote.
The only option seems to be exporting it as as a Quicktime movie.
Actually, with trial and error, the Quicktimes in the Quicktime play great. BUT are missing controls!
So anyone viewing the interactive Quicktime from a CD-R has no choice but to watch each clip. Longest is 17 minutes so a pause or stop is an option that is needed.
Does anyone know how to get those QT controls (or at least stop or pause) into the movie inside the exported interactive Quicktime from Keynote?
Is there a 3rd party solution? I'm desperate.
Alternatively, if anyone knows how to do same but as a Flash file, that would be fine too.
This was problem in Keynote 2.0 as well. My presentation size is big enough.
Considering the convergence of audio and video all over Apple product line, I just don't get why this was not considered for the 3.0 update. I want to export my lectures for students to self run. I'm probably not the only university professor who shows video and would like Apple to deal with this ASAP.
G4 duo mirror Mac OS X (10.3.9)

If you have Qt Pro, you can open the file and turn on a controller, then resave the file.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it. everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

Try Mixing Down the audio before export.
This info may help;
https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
Also serch this forum for Mix Down you should find lots of info.
Al

Putting a quicktime movie into keynote?

When I put a quicktime movie in to keynote it shows video controls in the raw set but when I export it to an interactive quicktime movie it does not show the video controls is there any way to show the videos controls?
G5 Mac OS X (10.4.2)

EDIT: The below answer is wrong. I just read again, No, you can't do this in Keynote. Sorry!
Ohh, I think I get it. When you export as a normal movie, the controller is turned on by default. When you export an interactive movie, the standard controller is turned off. To turn this on for interactive movies, you'd have to have QuickTime Pro, open the movie, do a command-J to open the properties, go into the Presentation tab and change "Movie Controller Type" from "None Movie Controller" to "Movie Controller".

Keynote to quicktime movie no sound?

Similar Messages

Maybe you are looking for