Keynote Update Error

Today I downloaded the iWork 9.0.4 update and tried installing it. However I get the following alert message, "An eligible Keynote application was not found in the location /Applications/iWork '09". I do have Keynote and it is in my applications. Any ideas on how I can get the update to run? Thanks!

Sorry, I should have explained more. If you have remove Keynote from the iWork '09 folder, that is the problem. Keynote, Pages and Numbers need to stay in that folder. If you had removed them before running the update, try creating a folder called iWork '09, putting the apps in it and running the updated again.

Similar Messages

Keynote update error iwork09

I recently updated manually the Keynote update. I have iwork 09 version 5.0.4 (633). So i wanted to get the recent version. There were couple of things that were not right;
1- I downloaded the update package (9.0.5) for iwork 09, it never showed as a part of "apple autoup dates
2- As i tried to install the pkg, it gave me an error
" An eligible Keynote application was not found in the location /Applications/iWork '09."
3- Was not able to update. My iwork is registered with appleand i have the box as well.
4- I do not have an apple care plan, so what should be done?
Thanks

You need to make sure that all iWorks applications +(Pages, Keynote and Numbers)+ are in the Applications folder in a folder titled iWork '09. If they are not then the Software Update won't find them in need of updating and your updater won't work. You need to create a folder titled iWork '09 +(make sure it is exact)+ and then try the update again.

How to find error occurring during Keynote updating

My Keynote update cannot be completed. This message was given: "An error has occurred". How can I find out what this error might be so it can be fixed?
I have an older version of Keynote installed, but when I get the update notification and agree to it, the update is stopped and the above message given.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Windows Vista update error code 80070490

Hi there,
Can anyone help me with this issue! I've tried everything under the sun to fix this problem so I'm hoping you's more in the know than myself can help!!??

Hi
This Vista update problem seems to be known to Microsoft:
+If you receive Windows Update error 80070490, it means that a file (CBS Manifest) that's needed to install updates is corrupt. To correct this problem, you'll need to repair Windows. Repairing Windows won't damage your personal files or the programs that are installed on your computer.+
Here more details how to fix this issue:
[Windows Update error 80070490|http://windows.microsoft.com/en-us/windows-vista/windows-update-error-80070490]

Windows Vista Update Error 80072EFD

got Vista Home Premium 32bit and updates were running smooth till January. In Feb- March updates just stopped to work due error code 80072EFD. Have tried with Fixit ( doesn't work as well ) got an error 8004FE2C, and Win Defender got the same error
as updates 80072EFD. My laptop is without viruses ( have ESET Smart Security ) and no maleware ( have Malewerebytes ). Already had checked all Win Update services were they running, then resetting them and added the links of microsoftupdates.com in ESET
and Explorer ( preventing form blocking the site) even closed all firewalls and security.....without any success. Still got the same error 80072EFD!!
Can u please help ! :(

Try to use the below to see if it helps http://windows.microsoft.com/en-sg/windows/windows-update-error-80072efd#1TC=windows-7 And try resetting the windows update components http://support.microsoft.com/kb/971058
Http://blog.theinfraguys.com | Please remember to click “Mark as Answer” on my answer if it helps. :)

Windows Vista- Update Error 80044016

Good afternoon!
Friend of mine is struggling with Windows Vista SP 2 - Windows Update.
So far I tried to:
-Disable AV, Disable Firewall
-Clean boot
-Automated solution - fix it
-Sfc
-checksur
-re-register responsible dll's
regsvr32 wuapi.dll
regsvr32 wuaueng.dll
regsvr32 atl.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wuweb.dll
regsvr32 wups2.dll
regsvr32 msxml.dll
regsvr32 msxml3.dll
regsvr32 msxml2.dll
regsvr32 qmgr.dll
regsvr32 qmgrprxy.dll
-currently running Malicous software removal from safe mode in case of possible hijack.
-PC is not under domain influence or behind proxy.
Fact is this occured after clean install. He tried to reinstal it again and issue persists.
Could you please check windowsupdate.log bellow and try to tell me what should be my next step?
Due to the fact that my account is not verified yet, I can't post log here therefore I've chosen pastebin as the best location.
pastebin.com//WJDzA6eq
Thank you very much!

Also I wanted to tell that Update error code is : 80044016
Regards,
Chrobak77

Media Encoder CC (2014) Update Error (U44M1P34)

Just did a batch of CC updates and Media Encoder CC (2014) failed with error U44M1P34. Any suggestions on how to fix this?

U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Windows 7 PRO GP update error

Windows 7 PRO GP update error
We have a very peculiar problem
We have a Primary DC & Secondary DC installed in all our office ( Windows 2008R2). The Domain name is abc.com for all the Offices and the replication between the DC's happen in between the office happen without a problem.
The clients in each of the offices gets authenticated from the DC in the respective office.
But for a group policy update it gives an error as below
"Computer policy could not be updated successfully. The following errors were encountered: The processing of Group Policy failed. Windows attempted to read the file
\\<FQDN>\sysvol\<FQDN>\Policies\{BD732AAF-016F-11D2-945F-00C04Fb984F9}\gpt.inifrom a domain controller and was not successful. Group Policy settings may not be applied until this event is
resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
The error happens only on some clients.
We are able to Ping, connect to the local DC and the client gets the IP from the local DC and also gets authenticated by the local DC for log on.
On the PC which gives an error if we try to ping domain name - abc.com it returns the ip of the DC in a another office and not the local DC.
Request to suggest a solution / tips to identify the problem

Thanks for your reply
Please find the IPConfig Details as requested
Windows IP Configuration of CLIENT with Problem
   Host Name . . . . . . . . . . . . : NP
   Primary Dns Suffix . . . . . . . : ALT.COM
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : ALT.COM
Ethernet adapter Local Area Connection 2:
   Connection-specific DNS Suffix . : ALT.COM
   Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
   Physical Address. . . . . . . . . : 00-19-99-F2-5B-BC
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::bc5c:5976:37b2:d42a%14(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.102.22.72(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Tuesday, July 08, 2014 8:02:23 AM
   Lease Expires . . . . . . . . . . : Wednesday, July 09, 2014 8:02:23 AM
   Default Gateway . . . . . . . . . : 10.102.22.1
   DHCP Server . . . . . . . . . . . : 10.102.10.10
   DHCPv6 IAID . . . . . . . . . . . : 318773657
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-FE-B8-99-00-19-99-F2-5B-BC
   DNS Servers . . . . . . . . . . . : 10.102.10.10 10.102.10.11
   Primary WINS Server . . . . . . . : 10.102.10.10
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.ALT.COM:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : ALT.COM
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
===========================================
Windows IP Configuration on DC
   Host Name . . . . . . . . . . . . : ALTHODC03
   Primary Dns Suffix . . . . . . . : ALT.COM
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : ALT.COM
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Intel(R) 82575EB Gigabit Network C
on
   Physical Address. . . . . . . . . : 00-19-99-7E-7F-62
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.102.10.10(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.224
   Default Gateway . . . . . . . . . : 10.102.10.1
   DNS Servers . . . . . . . . . . . : 10.100.10.10
                                       10.102.10.11
                                       127.0.0.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{4353BDBD-759C-45E1-A523-621CC16121AA}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
=======================================================
We do not use Sysprep and also we normally do not use imaging
Domain Time is in Sync with DC & Client

Open Delivery value update error in credit management

Hi
We have credit management active at delivery level. The value of open deliveries is not getting updated correctly for items with material substitution (material determination). For all other items, its getting updated correctly.
E.g Let say the credit limit set in FD32 is 10000 and the credit limit used % is 98 and the credit exposure value is 9800.
Now when I create an order with qty 10 for mat A, it creates a sub item B due to material determination and the value of the item is Rs.1200. In our system, the sub item with TAPS item category is relevant for pricing.
Then I create a delivery in VL01N and save it.
Now if i check in FD33, the credit limit used should be 101% and the credit exposure value should be 11000, but its not updating the open delivery value correctly. Its not considering the value of the new delivery.
However, If I add a normal item (TAN) in the same sales order and create a delivery for that item and save it, its updating the credit exposure based on the value of the normal item in the delivery correctly.
How to make the system update the open delivery values correctly by taking the items with material determination also into account.??
Please advise if any specific settings need to be done.
Regards
Madhu

Hi,
the system updates open values for credit management. These are:
Open sales order credit value (S066-OEIKW)
Open delivery credit value (S067-OLIKW)
Open billing document credit value (S067-OFAKW)
The system updates the open values in standard SIS structures S066 and S067. Technically, the structures are transparent tables. You can display the contents using transaction SE16 or using table maintenance.
The S067-OLIKW will give the open delivery credit values credit.Check in you system whether this table is updated with the delivery values for the credit account(customer number)
RVKRED77 u2013 Reorganize SD credit data
When updating errors occur, it enables you to reorganize the open credit, delivery and billing document values.
If the table is not updated run this report in background.
Regards,
Saju.S

After last automatic update, error message XUL Runner error platform version '6.0.2' is not compatible with minVersion 6.0.1. maxVersion 6.0.1. I am unable to open Mozilla Firefox at all. Had to use Explorer to ask this question!

After last automatic update, error message XUL Runner error platform version 6.0.2. is not compatible with min Version 6.0.1 maxVersion 6.0.1 appeared every time I try to open/run Mozilla Firefox.

See:
*[[/questions/869812]]
*[[/questions/869951]]

Error while posting the Idoc 'Update error, transaction VA01'

Hi Gurus,
When an inbound Idoc for sales order is trying to post we are getting the error 'Update error, transaction VA01'.
Aslo following are the details of the error:
Update error, transaction VA01
Message no. 00377
Diagnosis
An error occurred in CALL TRANSACTION USING or CALL DIALOG USING
during a synchronous update.
The error was caused by the transaction VA01.
Update information
Return code: 009
Text : Error during insert table FPLTC (RC= 1, Key= )
Procedure
Pleas analyse your Batch-Input data.
You can also examine your posting data using the transaction SM13.
Can somebody let me know what would be the cause.
Also the we are trying to post the Idoc with a Id which is having maximum Authorization.

Hi,
Where you able to resolve your issue, I would appreciate if you can share the solution.
Thanks

I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ??

I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!

I am experiencing the exact same issue during the installtion process for iTunes 10.5.
I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP!

Update error while saving quotation

update error while saving quotation - express message
Error reads as "device type sapwin"
When the print option send immediately (option 4) in the printer configuration the error is coming and the document is not saving due to update error.
When the print option is send with own application (option 3) in the printer configuration the document is getting saved.
we want to run with option 4. could some one show some light on this problem.
regards
VS Arava

From the description the job is trying to print to a frontend printer. Try sending the job to another printer. Or print to LOCL. This will send the spool to your local default printer.
I suspect there is a network issue related to the printer set up.
when you use option 4 the error gets hit immediately. Option three is waiting to print later, the error does not likely show up until later when the job is actually printed.
Check the printer config..

Lion 10.7.1 update error = no sound , no mouse ...

I have Lion 10.7.1 and i got update notification so i start update my os when its come to installation i got message like "unknown error" and update of OS chrashed with some strange loud noise , then when it restarted i had no sound and my remote mouse don't work , it was all ok before update error.
In Preference - Sound there is no Output device ( i can plug in my suround my headspeakers and nothing happend). And my remote mouse not working. So i don't know is there enithing else not working but is seems all other ok.
I don't have backup and i have a lot of work on my mac Book Pro 13" 2011 , so i need to fix it without reinstalation cos i buy this because i was full of windows reinstalations ewery 3-4 months.
Sorry for my bad English it is not my native language i am from Croatia.

ok i solved this problem . First what was the problem ,it was permissions thet must be changed due to error upgrade of OSX.
solution:
1. restart PC , and when it start press option key (alt).
2. it brings boot options , i have OSX lion , Windows , and now i got Rescue , chose Rescue ( or repair or what ewer you have to reinstall osX).
3. you got some options to restore from backup , to reinstall, find help online , disk utility. Chose disk utility.
4. in Disk utility chose to repair permissions. when thet finish restart pc.
thet is what i did , and it fix me all. sound now work and USB 1 work too.
I hope this will help someone.

ITunes update error 7 (windows error 1114) on Windows Vista Home Premium SP2

I have been trying to update iTunes for the past month. I admit that I had not been keeping up with the updates for about a year but now that I want to update it, I am getting an error.
Computer: hp Pavilion dv6700 Notebook PC, Intel Core2 CPU T8100 at 2.10 GHz
OS: Windows Vista Home Premium, Service Pack 2
iTunes update error 7 (Windows error 1114)
error message from Windows:
Runtime Error!
Program: C:\Program Files\iTunes\iTunes.exe
R6034 Application has made an attempt to load the C Runtime Library incorrectly. Please contact applications support (that is Apples iTunes) team for information.
I am also getting C Runtime Library error message about once a day since I tried to update iTunes.
What do I do?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Keynote Update Error

Similar Messages

Maybe you are looking for