Keynote video - no sound

I'm teaching students to use Keynote on the ipad.  We created a presentation with imbedded videos they took using Camera. When playing imbed video in slide, sound is barely audible. Audio is fine in Camera app.  I don't have this issue on my ipad. Is there a setting I'm missing? Thanks,  TC in Ohio

This has not solved my problem and is a snide comment.  When you have a large number of Keynote presentations used in legal cases it is very inconvient to have change all computing immediately to Mavericks.  By Laptop which I use when travelling is now on Mavericks and the issues to do with GMAIL are horendous. There is no ALL MAIL in Gmail in Mail Application.  In fact the access to all mail is only on iDevices (iPad and iPhone) not on the computer.. rediculous....
On the Laptop using Mavericks - The preferences keep reverting to "store drafts on Server" despite over 3 times unchecking this option - I only want SENT mail to go to the server.  The reason for unchecking is that if on line - every small change to an email using gmail creates "temporary" files on the Mac and literally runs hard drive space down at a rate of knots.  Previously the happened and I had to turn off internet wifi after buying software called MAIL REMEDY from the App Store to clear out the problem. 
With these issues clearly a MAIL problem - I am very reluctant to update my iMac to Mavericks until it is solved and I can see it working properly on my MacBook.  With the iMac 27in on Lion - there is no option of updating my iWork Family Pack Keynote - I have to BUY the Keynote for $20.99 even though I have already purchased the family pack in iWork 09 and it is free on my Laptop - seems a bit shonky that Apple DAMAGES the Keynote Process and then makes you pay again for something which is free to everyone who uses the FREE update to Mavericks..... They should be supplied free to lower systems and acknowledge some people do not update until initial issues are ironed out.

Similar Messages

  • The video on keynote has no sound

    After updating iPad 4th gen. to IOS7.0.3 the videos on the keynote lost the sound although the sound still present on my iPhone 4  with the same IOS  Itried several videos extension of including .mov, .mp4 the problem persist

    This has not solved my problem and is a snide comment.  When you have a large number of Keynote presentations used in legal cases it is very inconvient to have change all computing immediately to Mavericks.  By Laptop which I use when travelling is now on Mavericks and the issues to do with GMAIL are horendous. There is no ALL MAIL in Gmail in Mail Application.  In fact the access to all mail is only on iDevices (iPad and iPhone) not on the computer.. rediculous....
    On the Laptop using Mavericks - The preferences keep reverting to "store drafts on Server" despite over 3 times unchecking this option - I only want SENT mail to go to the server.  The reason for unchecking is that if on line - every small change to an email using gmail creates "temporary" files on the Mac and literally runs hard drive space down at a rate of knots.  Previously the happened and I had to turn off internet wifi after buying software called MAIL REMEDY from the App Store to clear out the problem. 
    With these issues clearly a MAIL problem - I am very reluctant to update my iMac to Mavericks until it is solved and I can see it working properly on my MacBook.  With the iMac 27in on Lion - there is no option of updating my iWork Family Pack Keynote - I have to BUY the Keynote for $20.99 even though I have already purchased the family pack in iWork 09 and it is free on my Laptop - seems a bit shonky that Apple DAMAGES the Keynote Process and then makes you pay again for something which is free to everyone who uses the FREE update to Mavericks..... They should be supplied free to lower systems and acknowledge some people do not update until initial issues are ironed out.

  • The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The batterys the ipods come with are very sensetive somtimes they dont react right to the first couple of charges. Try fully charging it and then leaving it on until its completely drained a few times. If that doesnt work it might be a lemon.

  • How do I import video and sound files from a hard drive into Final Cut Pro X?

    I just installed the lastest upgrade to Final Cut Pro X.  I have an external hard drive connected to my computer and I want to import video and sound files into Final Cut Pro X- how do I make the transfer? 

    File>Import Files (Shift-Cmd-I). Select the files, fill out the dialog box that appears as you need.

  • No video or sound from iSight

    I have a frustrating problem ! My external iSight camera has stopped working, ever since I moved from a PPC G5 to an Intel Mac Mini. I did actually have it working for a while, but I must have changed something and now nothing I do will get it to work again.
    I have tried isolating the problem by removing other Firewire devices - the camera is always correctly recognised no matter where I plug it in; System Profiler shows it as present, and it is shown as available as a video or sound source. The problem is that when I actually try to use it, I just get blank (black) and no sound input.
    If I plug the camera into another machine, it is recognised and works OK !
    I'm sure this must be a software conflict, but I don't know what with. Console logs just show similar messages from any application that tries to use the camera, saying that it's unable to open the source for input. I'm suspecting that some 3rd party plugin or driver is being loaded and crashing out - perhaps because I migrated over from a non-Intel machine (I did a clean install, and ran the migration assistant).
    Any suggestions how to find the culprit ?
    Powermac G5 Dual 1.8   Mac OS X (10.4.2)  

    Phew - got it working, but don't ask me how !!
    I did a fresh install onto the internal HD (I already boot from an external one, see below). No dice. So I unplugged everything, and plugged in just the iSight.
    I have a LaCie external HD which also works as a Firewire and USB hub. With this unplugged, the camera worked on the fresh install. I then re-plugged in the firewire leads for the hub, and connected the camera to the hub. Rebooted (****, OS X boots fast on a fresh install on the Intel machines !). Still working. Then I plugged in the USB leads for the hub, still working. Which is strange, because that's exactly the configuration in which is WASN'T working a few moments before ! I then rebooted into my original system (on the external FW disk), and it's STILL working.
    Now this is really strange, because this is the config in which it really wasn't working before. All I can figure is that somehow connecting via Firewire first, rebooting, and then USB somehow tells the hub to work correctly as a FW hub. But this doesn't make too much sense, because other external HDs I have still worked fine before - it was only the iSight that wasn't working.
    The only other thing I can think of is that in the process of doing this, I moved a small plastic photo frame that I have that was sat ontop of the mini. The thing with this frame is that it's 2 bits of perspex held together by magnets. They are only small, but I wonder if there was some interference caused by the tiny magnets that somehow effected the Firewire connection (but only for the iSight ?). Anyway, that's staying off the top of the mini for now !
    I'm not sure if this explanation will ever help anyone else, but it does give you an idea how to isolate a problem. What I did was isolate the OS (by doing a fresh install), isolate the hardware (by unplugging it all, and selectively re-plugging it), and isolate apparently unrelated external influences (by removing the picture frame). If you're having strange problems with your computer, be methodical, and you will probably isolate the cause and fix it !
    Mac Mini   Mac OS X (10.4.8)  

  • Keynote presentation with sound

    I made a keynote presentation with sound - uploaded it to icloud and tried to play it thru my ipad mini - the sound will not work = how do I fix this?

    Does this happen to some of your other apps on iPad? Might want to try the side switch
    The switch next to your volume.... Flip it so you do not see the red.
    My guess is that your general settings ... Side switch is set on mute... And so the switch above the volume is showing red which means your sounds are muted for certain applications.

  • How can I import video and sound from my sony camcorder?

    I have just bought the mac.  I'm struggling to import video AND sound from my Sony DCR-SR87 hard disk handycam camcorder.  From what I've read already, I ended up purchasing and downloading Quicktime MPEG2, and used the Utility MPEG Component Lion from downloaded MPEG Streaming 1.9.3b6 to enable video and sound to play on the computer directly from the camcorder.  The problem is that when I import these clips using iphoto (it pops up when I connect the camcorder), the sound does not accompany the video onto the computer.  I've hit something of a brick wall and would really appreciate any help.

    OK, according to
    http://support.apple.com/kb/ht3290
    your camera is supported by iMovie 9.  Perhaps the question is better asked in the iMovie forum.  Would you like me to ask a moderator to move the thread?

  • My video recording sounds not working but other sounds are working fine, I've tried clearing the little mic thing near my earphone hole and had no success can someone please help me out?

    hhi guys
    my video recording sounds not working at all but it's working for other things such as music. I've tried to clear my sound thing near the earphone hole but had no success can someone please help me out?

    Had an Iphone 4 for about 3 months now. This happened to the first one I had and they ended up having to replace it at the apple store just a couple weeks ago 6/2. It happened again last night to my new one. This time i was able to correct it by going to itunes, backing up the phone to icloud, and then restoring the software. Mine did not work with voice memo, but did work with headphones plugged in, and would also work on speaker. I could hear callers but they couldn't hear me. I had purchased a new case (lifeproof case at $79.99) because it comes with plugs that cover the headphone jack, and the charging port, and is also waterproof. I heard that the root cause is due to lint, dirt, etc getting inside the headphone jack. Well, must be something else. It's a 10 days old phone, and has been in this overpriced case the whole time, and I have not used the headphones. I hope this doesn't keep happening.

  • Video clip sound after burning

    I use Adobe Premiere Elements 10, and I recently made a music video. I put a soundtrack to it. I turned the video clip sound all the way off and just let the soundtrack play over it, like a music video. I then burned it to a disk and played it on my DVD player. When it was playing, I noticed that the video clip sound and the soundtrack were both playingand over lapping each other. I burned several disks after turning every other sound off but the soundtrack, and still the video clip was playing over it. Please give me advice on how to fix it, as it would be appreciated.

    Welcome to the forum.
    First, I would play the Timeline with the Audio Mixer Panel open, and watch for the Levels of the other Video Tracks. You can also use that to Mute other Audio Tracks.
    One can also Alt-click on the Audio portion of the Clip, and just Delete that.
    Now, did you place your music onto the Fixed Soundtrack Audio Track? Some users have experienced problems with the two Fixed Tracks, Soundtrack and Narration, and the normal "fix" is to just drag the music (or narration) to an empty, "regular" Audio Track.
    Good luck,
    Hunt

  • Converted videos without sound

    i have added and converted 5 videos to ipod format, and added to my ipod.
    even though the videos had sound before they are not playing with sound on my ipod or on my itunes
    how can i make it play with sound

    The discussion of converting/ripping DVDs to iPod format is forbidden on these boards - [Terms of Use|http://discussions.apple.com/help.jspa]. I would suggest searching the internet or going to the [iPod Lounge|http://www.ipodlounge.com] to find what you're looking for, because I'm sure you're talking about converting your home movie DVDs to iPod format and not breaking the Copywrite protection of Commercial DVDs and U.S. Federal Law in the process.
    P.S. Breaking Copywrite Protection is also against the law in most other countries as well.

  • Videos without sound

    I have the latest itunes on my pc and videos in an endless list of formats avi mpeg flv wma
    I've imported the files into the itunes library and through the advanced option I click the 'convert to ipod/iphone version'
    it takes AGES for the conversion only to find out the video lacks sound. There is no audio signal at all.
    Any suggestions?

    Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
    (36772)

  • Trimmed Video has sound but no picture

    I need to split a large video file in two. When I use the trim function and select the first half of the video, it works great. I get a file with just the first half of the video - great sound and picture. However, when I try and create a file containing just the second half of the video, I get sound put a scrambled picture. I've tried trimming as well as deleting the first half of the video and the end result is the same.
    Any ideas of how to fix this?

    i have the opposite problem as you, video but no sound...

  • Rt cnbc has no sound, while other videos have sound. Suggestions?

    Rt cnbc has no sound, while other videos have sound. Suggestions?

    Are the videos that still have sound those in the Videos app, or a different app ? If Videos app then have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • Recording streaming videos with sound

    Can I use quicktime for recording streaming videos with sound? If not which Apple software can do it?
    Bye Christof

    You can use Quicktime to record streaming video +with it's audio+ by using a very simple trick. Using the same cable you connect your iPod/iPhone to your car's stereo system, connect your Mac's Audio OUT to its MIKE IN jack. I used FILE / OPEN URL to select the video stream source, then selected FILE / NEW SCREEN RECORDING. In the resulting 'Screen Recording' dialog box, I set the AUDIO slider all the way to the right, and under the arrow to the right, selected "Built-in Input Line In" for the microphone. I then used the appropriate controls to play the stream and record it. The resultant file was very acceptable. Good luck.

  • Missing video just sound with a black screen

    Missing video just sound with a black screen it cant be the avi. files because ive made many videos with avi. files

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Maybe you are looking for

  • Folder Structures For Music

    Greetings Everyone, I have an iPod Classic (160gb) connecting to a Windows XP PRO machine. I understand how to sync music to the player. I understand how to create playlists in with iTunes. I understand how to create folders in iTunes to organize the

  • SRM program running too long BBP_GET_STATUS_2 and is locking carts

    Program BBP_GET_STATUS_2 appears to be running for more than 7-8 minutes at a time, and apparently is locking carts (especially those that buyers are in the process of approving)/ The variant we are using is wide open (i.e. there are not selections)

  • TS1717 What do I have to do to keep the iTUNES program on my computer BUT NOT RUNNING on Start UP? It requires too much CPU usage on my old computer.

    What do I have to do to keep the iTUNES loaded as a program on my computer BUT NOT RUNNING on Start UP? Just opening when I want to use it. It requires too much CPU usage on my old computer.

  • Question about Migration Assistant

    So I just bought the iMac i5 and I have a second generation MacBook Air that I would like to transfer all of the data from to my new iMac. I was wondering if FireWire method was the fastest way to do it because I just tried over Wi-Fi and I walked aw

  • GX 720 Vista x64 Problem

    1st I would like to thank you for all the help you provided. I have another question:Did someone install Vista x64 on the laptop gx720 . I get the same problem as 2 more guys on the forum. It freeze on the Log screen. Xp x32 and x64 is working OK Did