Keynote with 3 screens

How do I make the presenter screen go on screen 2 and the display onto screen #3... So that my iMac is NOT being used, just the other two screens. This is necessary for me because the two external monitors are sent to a stage monitor and the projector... Currently we are mirroring the iMac's screen to screen 2... but it makes everything flash during the transition.
Basically, can I specify which screen the presenter and presentation images are displayed to? (When using a 3 monitor setup)
Thanks

So, does anyone have a solution to this?

Similar Messages

Keynote with a Projector...

I'm giving presentations to a group using Keynote and a projector. Is there a way to show the presentations without the audience seeing the Keynote files screen? The easy fix would be to put them all into a single presentation but I need the flexibility to change up the order if needed, so I need them in separate files. It's not very professional for the audience to see what's going on in the background.
I am open to the idea of using a different app. I'm new to the Apple environment and don't know what solutions might be available.
Any advice would be welcome.

Most projectors display a logo when there are in a sleep mode, some let you substitute your own logo.
There is no way to do what you want with the iPad.

Keynote with Iphone.

Can you use bluetooth to control iPad (Keynote) with your iPhone? It works perfect on wifi but I do not always have that. If so, how? Is there a remote that would work?
Thanks

I would expect that this is possible, given that it may be connected to a LCD display, and this was done at Apple's SDK Roadmap presentation recently.
Settings>IPod>TV out may be a way to do this, but I'm not sure. perhaps other posters have tried it and can advise more.
This from Microsoft in November:
+“Getting presentations from PowerPoint 2008 for Mac to your iPod or iPhone is easy. PowerPoint exports your presentation as a series of pictures directly to iPhoto, or saves those same slide images as pictures to your Pictures folder. From there, sync pictures to your iPod or iPhone through iTunes as usual, then use the built-in Photos or slide show program on your iPod or iPhone to show your presentation. No sweat!+
+“Presentations look great on the big wide screens of iPhone and iPod Touch, but they look even better on a big screen TV or projected. Plug your iPod into a television or projector using the Apple Component AV or Composite AV cable and leave your laptop in the case.”+
Message was edited by: jia10

Possible solution for white C2D iMacs with screen artifacts or lines

I have a white 20" Core 2 Duo iMac with the famous screen artifacts issues. Screen tearing, horizontal lines, goofy pixels, you name it. From my research it seems there are countless others with these problems.
I tried running the SMC fan control app to boost fan speeds. This helped a little, but did not completely solve the issue. A lot of people think these issues are related to heat, and I agree, but only partially. When a graphics chip overheats it is eventually damaged. I have damaged my share of graphics chips while overclocking them in my PCs. In the case of my iMac and maybe plenty of others, I still have issues if the GPU is hot or cold.
I installed WinXP using bootcamp. I finally found an application which will change the clock speed of the GPU on the fly. The X1600 GPU in my iMac has a 475Mhz core speed and 500Mhz memory speed. I cut these down to 400Mhz on the core and 400Mhz on the memory. At these lower speeds I no longer have any issues with screen tearing, horizontal lines, or random crashing. I do still have a few wierd pixels here and there, but they are not all that noticeable and I can live with them.
Now for the fun part. I wanted to permanently fix these speeds into my GPU so when I boot back to Mac OS X, I don't have any issues, and I no longer have to boost fan speeds or run any additional apps. I spent most of today taking apart my iMac, putting DOS on a spare SATA hard drive, and running an external monitor while booting my iMac with the spare drive hanging out the side. All this so I can run ATIflash, and use it to dump an image of the GPU BIOS ROM file.
Well, I ended up finding out the ATI GPU has no ROM to flash. My best guess is open firmware or something like that passes this data on to the GPU when the system boots.
So, in my case slowing the GPU down significantly reduced my problems while running within windows. I am 100% confident slowing the GPU down will also improve issues within Mac OS X, but I have no way to pull this off.
If Apple reads this, or if anyone has any connections at Apple, can we please get an optional firmware update to reduce the speeds of the X1600 GPU? It won't fix all the iMacs with these issues, but it will fix quite a few, and for those out there who don't have any issues at all with their white C2D iMacs, lowering the GPU speeds will most likely prevent damage from inevitably occurring, keeping them a happy customer.
Now, some of you may not like the idea of a slower GPU, but if I have to pick between a slower GPU and an $800 logic board, I will take the slower GPU any day.

There is a little easier Way to Navigate in Doing an F.D.R. than that Method: I listed it here if you prefer going this Route..
2. Re: FACTORY RESET FOR RAZR AN RAZR MAXX

Program with screens in background

Hello everyone.
I've created a program in abap with screens (no report).
Is it possible to run this in background.
I would like to have a checkbox that say 'background process'.
If it's checked and the uses clicks the process button, the program must run as background job.
Is there anyway to accomplish this ?
Thanks in advance !
Merijn.

HI Merijn.
There are three ways that you can schedule the program in background. Condtion is you have to create another program for it
1. Go for the Report where you use the JOB_OPEN , Submit your report and Job_close. Then program would run in background.
Here you can give our parameters on the screen.
2. Create a report program. Use the submit statement in it with all selection screen parameters.
Then schedule the Background job in the SM36 and process it in SM37.
3. You can record the BDC and schedule the background job.
For all these it require new executable program to be created. I Guess are the only possible ways.

Webdynpro ABAP & JAVA step by step example with screen shots

hi experts,
i am new in webdynpro. i want to learn webdynpro so any one plz help me how to create,how to install,connect,and how to execute plz send any documents for webdynpro ABAP & JAVA step by step examples with screen shots.it's really helpful for my carrier.
thanks and regards,
sapbbm.

hi bala,
check out this URL you have 41 sample codes and PDF of Webdynpro for JAVA.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
Thanks
Gopi

HT1212 I have no idea why suddenly my iPhone5 will not move past the Password screen; also, a voice describes each button I touch, and ends with "screen locked" (not "phone locked").

I have no idea why my iPhone5 suddenly will not move past the PW screen; a "voice" identifies each button touched (the Slide button, for example) or the PW buttons, and then ends with "screen locked" (not phone locked).

I believe you have Voice Over on:
You have to tap, then double-tap to select the numbers to enter your passcode.
Then:
Press Home.
Tap Settings. Then double-tap Settings.
Tap General. Then double-tap General.
Use three fingers on the screen to scroll to Accessibility.
Tap Accessibility. Then double-tap Accessibility.
Tap VoiceOver. Then double-tap VoiceOver.
Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.

How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?

Dear all
How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
Thanks
Regards
karan

Hello
These are the following errors
1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
3.
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
tThere are repeating errors also.
TThanks
Regards
kkaran

SAP AUTO ID with screen shots.

Is there any step by step scenario,where we can understand about SAP AUTO ID with screen shots.

Hello PSRK,
Please note the Outbound Delivery scenario to be used here is the Slap & Ship Outbound Scenario
which only uses SAP AII.
Steps in the same will be:
1) Maintain ID settings - Defauly ID version - spro - aotu id - basic settings - id settings - default id version
2) Maintain Products - spro -auto id - master data + sap easy access -- auto id -- master data
3) Maintain Devices - spro - -auto id master data + sap easy access -- auto id -- master data
4) Maintain number ranges - spro --auto id master data + sap easy acccess - auto id -- master data
5) Maintain Rules - spro - auto id - Rules
6) Maintain activities - spro - auto id - Activities
7) Maintain Locations - easy access - master data
8) Maintain Conditions spro - auto id - conditions
9) RFC for simulating device controllers - sm59
10 ) then use auto id test tool - easy access - auto id - tools -auto id
Thnks

Step by Step documents for Process Chain Error Handling with Screen Shots

Hi
Is anybody having Step By Step Documents for Process Chain Error Handling with Screen Shots ?. Please forward it to me to my e-mail [email protected] . I will reward points to u immediately.
bye
Aamira Khan

Hi,
You can find lots of topic related to process chain issues in SDN.Please make a search in SDN.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=process+chain&adv=true&sdn_author_name=&sdn_updated_on_comparator=ge&sdn_updated_on=&sortby=cm_rnd_rankvalue
Regards.

How to increase formUID to a form created with screen painter

Hi,
I've got a problem with my form. I created a form with screen painter but i can't succeed to increase my UID form.
For example, when i open my first form, the UID is always at FP_0.
My script:
private string FormUID = null;
public FP_Form(int NumInstance_)
 this.NumInstance = NumInstance_;
this.FormUID = "FP" + NumInstance.ToString();
 load();
 oDBDataSource = oForm.DataSources.DBDataSources.Add(DBDataSourceTable);
 SBO_Application.ItemEvent += new SAPbouiCOM._IApplicationEvents_ItemEventEventHandler(SBO_Application_ItemEvent);
private void SBO_Application_ItemEvent(string _FormUID, ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
 BubbleEvent = true;
 try
if (_FormUID == this.FormUID) //here "_FormUID" is increased but "this.FormUID" is still = FP_0
 switch (pVal.EventType)// selon le type d'action executée
 case SAPbouiCOM.BoEventTypes.et_FORM_LOAD:
 if (pVal.BeforeAction == true)
 SAPbouiCOM.ComboBox List_reseau = (SAPbouiCOM.ComboBox)oForm.Items.Item("5").Specific;
 List_reseau.ValidValues.Add("1", "test");
 break;
 case ...
 break;
Please help.
Regards,
Zakia.

Hi J.
The answer is yes You just have to give your form a unique id.
1) Give your form in screen painter a name like BTWO_DYNAMIC_UID (just plain text).
2) Make sure your FormType and appformnumber have a unique number (i.e. 2000060001). You can do this in the xml source.
3) By loading your document replace the BTWO_DYNAMIC_UID with an unique id. I have a counter that's a member of my class and increase that number to get a unique id (BTWO_F_1, BTWO_F_2 etc)
I have added a code sample, SBOApplication is my SAP application object and mFormNumber is a member (integer) of my class.
Succes d'r mee, en als 't nie lukt hoor ik het wel... ;)
Code (C#):
// New xml document
XmlDocument oXmlDoc = new XmlDocument();
private Form LoadUniqueForm(string AMyFile)
// Define your path to
sPath = @"Forms" + AMyFile;
// Load the form
oXmlDoc.Load(sPath);
// Replace the string with an unique id
mFormNumber++;
string sXML = oXmlDoc.InnerXml.Replace("BTWO_DYNAMIC_UID", "BTWO_F_" + mFormNumber.ToString());
// load the XML file in SAP
SBOApplication.LoadBatchActions(ref sXML);
// Return the form
return SBOApplication.Forms.Item("BTWO_F_" + mFormNumber.ToString());

How to create a transaction code for a function group with screen 100 as st

Hello ,
I have requirement where I need to create a function group and create screen 100, 200, 300 and include the function in the screens.
Customer asked me to create a transaction with the screen 100 as the starting screen.
Can you please let me know how to create a transaction code for a function group with screen 100 as starting screen.
[ It is not a module pool program ].
Thanks
Prashanth.
Moderator message - Please ask a specific question and do not ask the forum to do your work for you - post locked
Edited by: Rob Burbank on Jun 2, 2009 11:49 AM

Go to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
Name of screen field:                               Value
D_SREPOVARI-REPORTTYPE                RW
D_SREPOVARI-REPORT                        ZPCA
Save and transport accordingly.

My iphone 5 have problem with screen

Dear Sir/Madam
My iphone 5 have problem with screen, i could not control sometime because it frozen and appear white cross line. I have restore my phone, but issue still there
I have same issue with this user on youtube http://www.youtube.com/watch?v=xpB7mqcWM1A
Please help to advices how can i do now
My Phone Information
Serial Number F17JRZ55DTTP
IOS 7.1.1(11D201)
Thank and Regards
Thanh

Hi, I use my phone carefully, did not drop it before. I restored it cause i think problem come from jealbreak or software. It still happen.
Currently, it is ok after i turned off the phone through night . Thank for your help

Problems with screen sharing

Upgraded three systems to Mountain Lion yesterday (Early 2011 MBP, Mid 2010 Mini and Mid 2011 Mini).
I rely on Screen Sharing to maintain the two Minis using the MBP. Now, while the Mid 2010 Mini can be accessed just fine, the same is not true for the Mid 2011 Mini. After a long delay, a window will pop up but is black. If I toggle between scaled and full screen a couple of times, the screen will be displayed but will accept no input. Odd.

I was able to resolve the problem with screen sharing from my MBP to my problematic Mini.
My home network uses a Belkin N600 dual band router with both the MBP and Mini using the faster N band. After switching the Mini to the slower band, screen sharing began working again. My other Mini that worked all along was hardwired to the router so was not an issue.
Oddly, with Lion, screen sharing worked having the MPB and Mini on the same N band.

How to configure Time-sheet in Project server 2013 please share the doc with screen shot

How to configure Time-sheet in Project server 2013 please share the doc with screen shot
Thanks and Regards, Rangnath Mali

Hi,
Please refer to the following Youtube video and article.
https://www.youtube.com/watch?v=lZWvg4q17JE
https://support.office.com/en-sg/article/Set-up-timesheets-and-task-status-672fa06f-8c4b-4e43-bfbc-4c355d681605
Please don't forget to mark it answered, if your problem resolved or helpful.

Is mac mini compatible with screens which are not Mac?

Is Mac mini compatible with screens from other brands different to Mac?

Yes.
We have two minis with three screens betwen them, LaCie, Eizo and HP. All work fine.
Obviously you need to check limitations on screen size etc.

Keynote with 3 screens

Similar Messages

Maybe you are looking for