Keynote with movie

OK, I'm officially stumped. I've made a 32 slide show, with two slides as QT video. One video is 5 mins, the other is just over one minute.
I can play the slide show, and all works fine, but when I export to quicktime video, it all goes nuts. Either the video hangs up, or does not play correctly. I think I've tried everything, and this is day 4, and still I can't get it right. Can anyone please help

i do this often with few problems.
some suggestions:
restart mac. make sure no other programs open. turn off airport, bluetooth, expose. unplug all peripherals.
try reducing the quality of compression in export settings.
use expert/custom settings in the Save/Export dialog box. choose a smaller codec, like PhotoJpeg at 50%.
good luck.

Similar Messages

  • Keynote with embedded .mov exported to Quicktime and then WMV (Flip4Mac)

    Hi,
    I have a Keynote with an embedded .mov file (video and audio) half way through which exports to Quicktime fine ("Keynote .mov").
    When I use Flip4Mac to convert the Keynote .mov to WMV the resulting WMV file works fine but stops when the audio of the Keynote .mov stops i.e. Flip4Mac doesn't render the last of the Keynote .mov
    I have sought help over at Flip4Mac tech support forum but thought someone here might know the answer.
    I have tried a variety of different .mov files in my Keynote but the same in all cases: export to QT is fine but Flip4Mac stops converting the Keynote .mov at the end of any audio.
    I can extract the audio track and Flip4Mac will convert the Keynote .mov (video) all the way through.
    Help?

    what format are the movies you placed on your slides? This makes a big difference in if they get included in the exported QT movie.

  • Keynote '08 with movies to Flash

    Is there any way to export a Keynote '08 file with movies to Flash? I get the following error:
    "Couldn't export a media file on slide..."
    Thanks fro replying.

    Welcome to the discussions, Shell Beach Ash.
    No, there's not a way to do this because Keynote doesn't currently export video to Flash files.

  • Macbook pro fails to read sd card with movies recorded on it, any ideas? I can view them in the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it.

    My macbook pro is failing to read a new sd card with movies recorded on it. Any ideas please? A previously used SD card has downloaded without problems. I have tried using a card reader as well as downloading from the video camera itself, neither works.
    I can view the latest recordings on the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it but didn't think of that at the time. Obviously don't want to do this now as it will wipe the movies.

    Hi and Welcome to the Forums!
    From everything you've described, you've done everything possible. Hence, I recommend you seek out your warranty support.
    Good luck and let us know.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Find Material Document with Movement type 103 for material document 105

    Hi experts,
    In PO History, I have three line items with movement type 103 (Blocked Stock) and one with movement type 105 (From blocked stock to unrestricted stock). I would like to know the material document with movement type 105 document that has the movement type 103.
    Regards,
    Abdullah

    Hi,
      you can get the material documents (mblnr) for the movement type(bwart) in table AUFK.
    But i think you need to pass some other data along with bwart like matnr or aufnr for getting the correct mblnr.
    Regards,
    Chaitanya

  • Big Blunder with movies in iPhoto '08 and web galleries

    I've just upgraded to iLife '08 and found a REALLY BIG BLUNDER in the use of movies with iPhoto and the web gallery. As it is, the new 10GB limit won't be enough for diddly squat of movie hosting.
    I've got a Canon A640 that saves to .JPG and .AVI formats. iPhoto opens a gallery with them just fine.
    But .AVI movies take up ~50MB per minute of video. A 2 minute movie I made is about 100 MB, while a 9 minute movie is 550MB in size. So while it's fine to view them on your desktop, you do NOT want to upload them!
    However, iPhoto has no ability to convert .AVIs to any other formats.
    I went into iMovie and manually selected each .AVI clip and Exported it as "medium" to my local drive. Ok, this gets you a .m4v file that's much more workable.
    Going back to iPhoto ... uh, gee, "iPhoto cannot recognize that file format".
    The new iMovie can export exactly ONE format -- .m4v -- and iPhoto thinks it's an iTunes file and won't work with it. Thanks a lot guys. What movie format IS iPhoto expecting to use, exactly?
    I went over to the Apple store and presented my dilemma to one of the geniuses there, and the ONLY solution he could recommend was to get a license for Quicktime Pro and use it to do the conversion to .MP4. But, even then, iPhoto won't recognize .MP4 files in your folder. You have to explicitly import them. Again, iPhoto seems to like movies, but ... in what formats?
    As an aside, MP4 files are smaller than M4V files, but the additional compression takes quite a toll on the image quality.
    I filled up two 4GB SD chips with a couple dozen photos and several movies. The way iPhoto works right now, the only way to get these movies onto a .Mac gallery is to upload them directly, which is NOT a good idea! They take up an ENORMOUS amount of disk space, take FOREVER to upload, and I doubt users will find it very fun waiting for a 500MB download to view them (which download will take longer than the length of the video being viewed).
    iPhoto needs a way to recognize .AVI files and STRONGLY discourage you from uploading them -- offering instead to convert them to something more useful, like .M4V format, WITHOUT having to swith over to iMovie or use Quicktime or some other program to do the conversion.
    It also needs a way to tell it to handle other movie file format besides .AVI files.
    Thanks
    -David

    Errrr.... you guys are totally missing the point.
    Apple sells little Canon cameras, and they have them sitting right next to just about every Mac in the store. Ever noticed them? Maybe you own one? (I suspect not because you probably would have noticed this already if you did.)
    These Canon cameras take two types of images: stills are .JPGs and movies are .AVIs. Got that?
    JPGs are compressed and "ready to use".
    AVIs are UN-compressed and NOT "ready to use". You can play them locally and they look fine. But there's not much to tell you they're HUGE FILES. When I say "huge", I'm taling 50 MEGA-BYTES PER MINUTE huge. That means a measley 2 minute clip is 100 MEGA-BYTES in size. OK? Now, what's the download rate on your iPhone? How long will it take you to view a 2-minute AVI file? But, surely, nobody is dumb enough to load them onto their Web Gallery, right? Keep on reading.
    See, when you connect the camera to the computer, most people have their system set to open something like iPhoto or Aperture when the camera is connected. Agreed? (Maybe YOU don't, but LOTS of people DO.)
    Notice that you can choose to have iMovie or Final Cut Pro or something else launch when you plug the camera in as well. It's up to you. Most people launch iPhoto - or Aperture if they've got it.
    It so happens that iPhoto '08 loads in in BOTH sets of files. Why in the world iPhoto is happy reading in AVI files is beyond me, considering it won't recognize M4V files and has to be slapped to get it to take MP4 files. But it happily reads AVI files with no problem.
    Now, if you've got your iPhoto set to AUTOMATICALLY SYNCHRONIZE with your WEB GALLERY, what happens?
    Well, if you're like me and you filled two 4-GIGA-BYTE Flash cards with movies, and iPhoto launches (like when you plug the camera or flash memory into the computer) and starts to SYNCHRONIZE with your WEB GALLERY, what's gonna happen?
    Did you actually TELL it to upload those files? NOPE! But it DID!
    Several HOURS LATER your computer will finish UPLOADING 8 GIGA-BYTES of MOVIES to your WEB GALLERY! And if you interrupt it, well, it'll happily start over when you turn the computer back on again.
    That's really nice since .Mac now has a 10 GByte limit. Two and a half 4-GB flash cards will fill up your .Mac account if you shoot movies with your Canon camera, have iPhoto set to launch when you attach your camera, and/or have it set to automatically synchronize with your web gallery.
    All I'm saying is that if iPhoto is going to work with movie files, it should NOT blindly upload AVI files, NO WAY. I'd much prefer it if it would let you apply some kind of compression to them, eg., turn them into MP2 files. (MOV files are even bigger than AVI files, from what I can tell.)
    We're not talking about what you THINK about doing. We're talking about the DEFAULT BEHAVIOR of the program for a VERY COMMON SCENARIO -- that you don't HAVE to think about.
    So it's very possible that while you're happily editing your AVI movies in iMovie or Final Cut, iPhoto is happily sitting in the background uploading the same files to your Web Gallery. And you are clueless.
    Is that making sense now?

  • Not able to create a material document with movement type 103

    I am not able to create a material document with movement type 103,
    The system is populating the value as 101 .
    How do I create a matdoc with movement type 103?

    What is the error you receive? Please specify with message number.
    On MIGO, you need to change the default value mvmt type value to 103 before you enter the PO number to be able to do 103.
    Once this defualt value is set, you can enter the PO and item number in the document number fields and proceed with 103.
    But you cannot change the mvmt type for already entered items from 101-103 or vice versa.
    I think the 101-103 and 103-101 mvmt type conversion message is standard error message

  • Material to Material transfer with movement type 321

    Dear Experts,
    Material to material transfer with movement type 309, the system create a price difference account if price control "S"
    but we transfer material to material with movement 321 (quality ), no price didderence account is generated, system showing different document
    Exp--- Material "A" with STD price 150
    Material "B" with STD price 100
    document is created
    Material A A/c. Credit 100
    Material B A/c. Dr. 150
    My question is, the price difference where is adjusting, is finance and costing books of account will effect.
    Kindly help to solve the issue
    Thanks & Regards,

    Dear Wasim,
    321 movement is to transfer the stock of a material lying in quality to unrestricted stock.
    It's not used for material to material transfer.
    Check and revert back.
    Regards
    Mangalraj.S

  • Goods Receipt through internal order with movement type 262

    Dear Friends,
    some of our users  making entries like the following
    1. created Internal Order 
    2. Creating Reservation with movement type 262 ( which not issued material through movemnt type 261)
    3. Stock  updated
    i just want to confirm, we not issued like X  material,  even stock not available,  we can make entries like the above, To receive X material from Internal order/ subcontractor using movement type 262.
    kindly advice please  if it is wrong then tell me the process.
    Regards,
    Rajesh G

    HI,
    if we receive material from subcontractor what process we can do...
    can you explain your issue exactly what problem you have at your end .
    I think you want to take subcontracting material inside which is not in sap system now,it may finished material or it may component.If you don't want to show this material as at vendor now
    then you can try movement type 501  or through physical inventory  t-code MI10
    Regards
    Kailas Ugale

  • Transfer posting with Mov Type 311E in MIGO with reference to SC-PO

    Hi,
    I am working with MTO scenario.
    I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific.
    However, system does not allow me to do the same. whenever transfer posting, PO & movement type is selected in transaction MIGO, item details entry tabs are displayed blank.
    Below steps are being follow:
    Scenario is MTO ( special stock subcontracting)
    1. Subcontracting PO no. 4500000147 against Sale Order no 61 created.
    2. RM code - 61, available stock 100 TO & batch no.0000000127
    3. Transfer material to vendor for processing through MIGO ( since it is a special sales order stock, transferring happens from SL 0001- Main Stores to SL VLSC -Virtual storage location) using movement type 311 E
    5. Item Data details tabs are blank.---This is the issue / error.
    Note: I am restricted to post transfer posting through MIGO-Transfer Posting (will not use MB1B) due to some enhancement of MIGO and interfaces with legacy system.
    Please have a look on attachment for SAP screen issue.
    Regards
    Mohit Jaiswal

    Hi Mohit ,
    please check below link , you need to perform steps as given
    http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
    also see the sales order subcontracting using the business addon
    http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm

  • Error in  BAPI_GOODSMVT_CREATE with movement type *261'  after posting

    Hi All,
    After sucessfull posting of  BAPI_GOODSMVT_CREATE  with movement type *261' .
    After posting ,while checking In mb51 document exists for it but checking in mmbe stock not reduced from resisticted stock.
    Can you kindly tell the import parameter to be filled to over come this error.
    Thank you.
    Thanks,
    AMS

    Hi Himanshu/ Tejaswini Khante / Madhu,
    Thank you all for your kind reply.
    @Himanshu....I have tried with LWA_ITEM-STCK_TYPE = BLANK, Still it didnt work.
    @Tejaswini Khante ...I checked the MMBE tcode, all the stocks are in 'Unrestricted use' only. The quality inspection, reserved fields are all blank. The materials are not Batch managed.
    @Madhu...Yes, i discussed with the Functional, yet to find a possible solution.
    Thanks & Regards
    Rajesh

  • No authorization for this transaction with movement type 601

    Dear All,
    This is chandra i am getting this error in delivery level " No authorization for this transaction with movement type 601. If give the authorization for SAP ALL its working fine. If give the authorization for SAP SD T.Codes i am getting this error. Plz help me.
    Thanks and regards
    Chandra

    Dear Chandra,
    Check with -
    T. Code: OMJJ
    Select Movement Type: 601 and Double-Click: "Allowed Transaction" (From Left-hand side) .
    Check whether the Transaction is allowed for Movement Type 601 or not
    Note: if Transaction is not listed (i.e. not allowed) and you wanna allow this Transaction with Movement type 601, then -
    Up-there, Tab: New Entry. Click on it.
    Maintain entry as:
    MovTy: 601
    TCode: As reqd.
    and Save.
    Best Regards,
    Amit

  • Interactive pdf with movies/swf files doesn't work in up-to-date Acrobat Reader

    Hi, I've a CS6 InDesign doc with movies (MP4's from a URL) and a few swf files. When exporting as an interactive pdf, all the links, movies, swf's work fine in my Acrobat Pro. They work fine on other peoples PC's with Acrobat Pro. But on all my clients PC's with up to date Reader, the movies are playing slow, and the pdf just doesn't work as expected. With links to next page etc not working either. They have up dated their Flash Player too. Still not working well.
    Is there a magic fix? Can I re-save this pdf differently so they can experience all the interactive features properly?
    I created a similar pdf last year from CS5, but adding in the movies & links on the pdf. Do I have to do this again?
    Yours, mostly quite fed uply, Gina !

    Is it possible that your client's PC is just a very slow machine? You might consider cutting out some of the interactivity if your PDF is to complex to be handled by less powerful machines.

  • Problem with movies imported from iPad3

    Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
    It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
    I do not have this problem with movie footage imported from any other device.
    Any ideas?

    Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
    It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
    I do not have this problem with movie footage imported from any other device.
    Any ideas?

  • Help: Working with .MOV files in FCP and forced to RENDER FOR EVERY EDIT

    I'm working with .MOV files from my digital camera in Final Cut Pro and every time I make a new edit, I have to render it in order to see it in the canvas.
    How do I make it so that I don't have to render every edit in order to see it?
    (I've worked with files straight from a DV camera, and editing went fine. I'm assuming it has to do with the .MOV files)

    DV Cameras are not the same thing as a Digital camera. Digital cameras offer video on a limited basis and it's usually highly compressed in a non-editing format such as MPEG-2 or similar. NLEs are made to work with video cameras, not still cameras which is why you're having trouble.
    That's not to say you can't edit video captured with a digital camera, but you need to know how to prep it for editing. Some digital cameras shoot at odd frame rates and they all use some form of compression that is not typically used in editing. This means that you'll likely need to convert your clips to an editable format first using Compressor.
    Andy

Maybe you are looking for