Keypad lock with password in nokia x5-01

how to lock keypad with password .

http://nds1.nokia.com/files/support/apac/phones/guides/Nokia_X5-01_UG_en.pdf
Refer Pg. 105.. Read under Device and SIM Card Security..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Similar Messages

Set computer to lock with password in 5 seconds. now cannot open in time because of the 5 second shutdown. What can I do to now get into my computer??

Set computer to lock with password in 5 seconds. now cannot open in time because of the 5 second shutdown. What can I do to now get into my computer??

I'm not sure which option you set. Requiring the password after 5 seconds in System Preferences > Security only kicks in after the sleep or screen saver. The smallest option for sleep or screen saver is 1 minute.
Which options did you set?

How to i lock with password for my contacts folder in ipad3

how to i lock with password for my contacts folder in ipad3

You cannot lock specific applications or folders, but you can set a passcode on your iPad:
Setting a Passcode on an iOS Device

Ipad locked with password of icloud

Good day,
I have an ipad the locked with icloud password
unfortunately I forgot that account password.. what should I do to unlock the ipad without using the old account??
Thanks

ckuan's link is the correct place to go but if you wish to have some steps to follow then read the article below:
If you forgot your Apple ID password

HT1212 iPad still locked with password even after erasing the device, please help!

My iPad was locked because I forgot my password; I followed the step by step instructions to recover my iPad but it still asks me for a password to access the device even though the device should have been erased. Please help!?!

Is this how you do it?
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost

I need to restore my iphone but itunes can't connect because it locked with password. I can't input the password becasue it showing no service and needs to be restored.

I need to restore my iphone but itunes can't connect to it because of my password which I can't input becasue it has no service and needs to be restored. what can I do to restore it? Is there a way to input the password?

You will need to put the iPhone into Recovery Mode to be able to restore it in iTunes.
To put your iPod/iPhone into recovery mode:
1. Make sure the iPod/iPhone is connected to a computer with iTunes installed on it.
2. Hold down the sleep/wake button(top button) and the home button at the same time until the iPod/iPhone screen goes black then shows the apple logo( usually 10-15 seconds).
3. Once the apple logo appears on the screen, let go of the sleep/wake button and keep holding the home button.
4. The ipod/iphone screen should show an itunes logo and usb cable if you were successful. A dialog box will appear in iTunes that states an iPod/iPhone in recovery mode has been detected if you are successful.
5. Click ok, then click the Restore button
After that you should be up and running in no time!
I hope that this is helpful.

Screensaver No Longer Locking With Password

Since upgrading to 10.4.8, the screensaver no longer locks out by requiring a password. As soon as the mouse or keyboard is hit the screensaver closes and lets the user in. A password panel is supposed to pop up, but it doesn't. Yes, I do have "Require password to wake this computer from sleep or screen saver" enabled in "Security" preferences, and I don't have any special Energy Saver preferences set. Any ideas?

This is a known issue and apple is working on a resolution. I opened a bug report and this is what I got back from the developers:
RE: screensaver is not longer asking for a password
Follow-up: 23579931
Hello Scott,
Regarding the issue you reported, after further investigation it has been determined that this is a known issue. We take any report of a potential security issue very seriously. It is being addressed, and we would like to thank you for taking the time to pass it along to us.
If you have any additional questions related to this issue or wish to check on status of the original issue, please feel free to contact us at [email protected]
Thank you for reporting this. We truly appreciate your assistance in helping us to maintain and improve the security of our products.
Best regards,
Power Mac G5 Dual 2Ghz/iBook G4 1.42Ghz Mac OS X (10.4.8) 2.5 Gig, Rad 9800 Pro 256M

Help with passwords on Nokia 6288

Hi,
Im trying to set a password so that when someone tries accessing my memory card through gallery it asks for a password. Ive tried going options then going set password except it never asks for the password again. Any help would be appreciated. Also ive just realised there is a password on the memory card that i havent set or have forgotten, how do i remove it?

You need to use a wired headset to activate the radio as the cable acts as the antenna.
No Bluetooth device will therefore be able to do this...

Can I hide or lock (with password) access to the add-on manager?

So users can't see what add-ons I have running? I don't want my (tech savvy) children knowing or being able to alter add-ons monitoring what they are viewing. I've caught my daughter looking at inappropriate stuff and she's a sneaky one so she tries to hide it.
I'd like to be able to restrict access to the add-on manager (through the menu bar as well) or hide it completely so only I can find it.
Is that possible?

Note that some extensions can be installed globally in the Firefox program folder and won't show on the about:addons page.
*http://mike.kaply.com/2012/02/09/integrating-add-ons-into-firefox/

Automatic Keypad Lock - Nokia E65

Hello Everybody,
I have been looking for an automatic Keypad lock system in my Nokia E65 set but unfortunately I have not found it yet.
Can anybody provide me any advise how this works in my mobile?
Thanks in advance

Unless you're after a slightly different feature, then the phone already comes with the facility you are looking for and it doesn't require a 3rd party standalone application.
There's more information on how to enable the built in keylock (with which you can also enter a code) on page 12 of the manual here :
http://nds1.nokia.com/phones/files/guides/Nokia_E65-1_UG_en.pdf
Hope this helps.
Regards,
Edward

IMac with lock and password!

I try to reset my administrator password because i couldn't remember the one I set up, then I follow the apple support steps to set it up, after I was done I restart my computer just like they suggested and now I have a freaking lock with password! I try few other steps and nothing is working, this is a refurbish iMac so no cd was enclosed in the box. I believe the password was from the previews owner because all the codes I would normally use doesn't work..... I need to solve this problem from home the apple store is 2 hours away! I purchase this iMac thru the apple.com so you guys can see it's my property not stolen.

You need to reinstall OS X:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
This assumes you had Lion or later installed. If the computer has Snow Leopard or earlier, then you will need the installer discs that should have come with the computer:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

HT4623 Please help! i have just update my iphone 4s with 7.4 update and my phone is now asking for a password which i dont have. I have tried my keypad lock i used before the update and also my itunes password and neither work, how do i rectify this ??

Please help! i have just update my iphone 4s with 7.4 update and my phone is now asking for a password which i dont have. I have tried my keypad lock i used before the update and also my itunes password and neither work, how do i rectify this ???

Did you buy this iPhone new from an authorized seller?

How to unlock keypad with forgot password in nokia...

My little brother has a Nokia 3120 phone. He entered password to keypad lock. But now he has been forget. Is there a way to unlock keypad. Plese help.

If you forget or lose the lock (security) code, try first the default lock code 12345. If it is not accepted, contact the nearest Nokia Care point to unlock your device.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Lock E72 with password?

Is it possible to lock the keypad on a nokia e72 with a password? Like on HTC touch phones and such

Yes, you can lock the keypad. On your E72, go to
menu > control panel > settings > General > Security > Phone and Sim card > scroll down to kaypad auto lock period > you can set the keypad lock period from here.
You can also lock the entire device from "Phone Autolock Period"

Keypad Locked, Not accepting password after update??

Hi,
I have a BB 8530 on MetroPCS (CDMA) network. I saw thier was some updates for BB protect and a bunch of other apps so i updated them. After the reboot, it asked me for my keypad lock pass and upon entering it, it would not accept it. I know that what i am entering is correct as i entered it prior to the reboot.
i have tried diffrent variations of it with CAPs and symbols corresponding to the keys i KNOW are my pass but still no use. I am on 9/10.
I have logged in to my BB Protect online and tried to change the pass from thier but it keeps saying the current password is wrong which is impossible.
Is there some deafult password it reverted to that i can try. I have tried everything.
Thank You

Hello
I heard somewhere that Rim is having problems with appworld and I think somehow affected you in this manner. They are doing some major update.
I could be wrong but just be a little patient.

Keypad lock with password in nokia x5-01

Similar Messages

Maybe you are looking for