Keys missing
i can't edit or delete contacts and add events on calendar:the keys are gone after update ios5. HELP ME !
That did the trick. Bummer, though, that before the update, the information was stored locally on my iPhone. Now the only way I can add to my calendar or contacts is by allowing the iCloud link of personal information. BOO! I'd rather keep that stuff locally. Thanks, Sherry, for the fix, though.
Similar Messages
-
Provision account key missing for condition type FRA1 in schema ZIMPOR
Hi,
While maintaining the condition value in PO, the below message displayed.
"Provision account key missing for condition type FRA1 in schema ZIMPOR"
Thanks and regards
MurugesanGo to
Spro>MM>Pur>Conditions>Define Price Determination Process>Define Calculation Schema
here select ZIMP and click control data
in that maintain "Account key" for FRA1 cond type in the Account key Column..
(Second column from right side) -
Provision account key missing for condition type ZPFV in schema ZUELOC
Hi
We have defined the condition type ZPFV for freight value & mentioning the same while creating po and in past we had prepared so many po by using this.
we hv not change any thing & today we are getting message " Provision account key missing for condition type ZPFV in schema ZUELOC"
What to do???????
Thanks
Ketan Valahi..
If the accrual is ticked in condition type in M/06, it should have an account key assigned to the condition type in the pricing procedure in M/08.
Go to your contion type ZPFV and check whether you have checked Accrual or not..
then go to ur pricing procedure ZUELOC and check the last two colums for your condito type i.e. Account Key and Accrual Key.
Maintain these..
try this if it works.
Thanks... -
Provision Account key missing for a conditon type
dear all,
pricing procedure is not working properly.. whille doing purchase order the system shows provision account key missing for freight condition type in pricing procedure... please give a solution....
regards
deepuHello Deepu,
Just Check in T.code : M/08 whether account key is maintained for freight condition type in your pricing procedure.
Specifically check for the freight condition type(s) which is having 'accrual' ticked in M/06 - control data 2.
If the accrual is ticked in condition type in M/06, it should have an account key assigned to the condition type in the pricing procedure in M/08.
Check the same and revert back.
Regards
Gregory Mathews -
Provision account key missing for condition type FRB1 in schema
Provision account key missing for condition type FRB1 in schema is the error coming while i enter freight value at PO
how to set this
krishnaHi Krishna,
Go to Pricing procedure using M/08 , here against the Freight condition type ( FB1), enter the accrual key ( ex. FRE)and account key ( ex. FR1 or FR2).
After saving to the customizing request, again create the PO.
Thanks & Regards,
Amjad -
Java Plug-in not working with WinXP SP2 Registry Key Missing Error Pop-Up
I have WinXp PRO with SP2 and the Oct 12 Security Update Patch for SP2 loaded and I went to my Control Panel and saw that the JavaRuntime Environment 1.4.2_04 icon was missing and when I went to click the Java Plugin icon to Open it, I got the following message in a Error Pop-Up window:
The system cannot find the registry key specified:
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java pPlug-in\1.4.2_04\JavaHome
I then went to Chage Access Program Controls and when I clicked on the Change box for the program, it wanted me to re-install the whole environment.
Prior to doing this, and potentially screwing up my MS winXp environment, I went to the Sun support page for Java Plug-in and I did get the dancing elmo appear as they said I would but I noticed that my environment was MS VM, not Java and that I was out of date and a newer update was avaliable.
The downloads page for the plug-in states clearly that it supports WinXp SP1 and NOT SP2.
SO, my question is, do I need to re-install anything or wait till the whole SP2 issue and java with (BITS) issue gets resolved and just use the MS VM engine during my browsing time? Is there a workaround and what impact will this have on my system? I am not developing Java Apps but am a Power user in Windows who is wondering if applets and general browsing might be easier, faster and more fluid if the Java Runtime was enabled as opposed to the MS VM solution?
Any ideas or thoughts on this very timely issue would be greatly appreciated as I see others have tried to post related issues but none that succinctly combines what I have asked for here in this post.
Thanks from NYC -Phildid you know that XP SP2 has so many technical problems? try SP1 or contact the WindowsXP Vendor
-
Issue with read statement with one more key missing in mapping
Hi All ,
I have such data in two internals table :
IT_bdc
vbeln posnr
90000593 10
90000576 10
90000672 10
90000672 20
90000672 30
it_konv
kbetr vbeln
6250 90000576
12160000 90000593
500000 90000672
600000 90000672
700000 90000672
My current program statement is :
LOOP AT it_bdc.
READ TABLE it_konv WITH KEY
vbeln = it_bdocs-vbeln.
currency = it_konv-waers.
endloop.
as you can see the posnr is missing in it_konv how can i modify this read statement so
that vbeln posnr from it_bdc should get correct kbetr from it_konv.
Kindly help in this mapping.Hi
sort it_konv by vbeln
then
loop at it_bdc.
read table it_konv with key vbeln = it_bdc-vbeln binary search.
if sy-subrc = 0.
perform your logic/task.
endif.
endloop.
also it depends what you want to do after reading it_konv.
in my logic if there is a vbeln in it_konv which s present in it_bdc then sy-subrc will be 0
and you can perform your logic.
and if there will be no matching vbeln in it_konv then sy-subrc will not be 0.
check the values in debugging.
Thanks
Lalit -
Error:Sync Key Missing in Replica DB
Hi,
While I am trying to test my Sync Bo thru Emulator, in the Inbound Worklist (Handler) I am getting the below error message, ' Synchronization key 0000000001 missing in replicaion DB, and 'Return code 1 (UPLOADER)'.
Could you pleae help in resolving the same.
Regards,
Sudhakar Karumuri.Hi Sudhakar,
Is it possible to give the steps which had been simulated?
For eg:-
1. order is created
2. Material conf/Time conf is created
3. sync
4. error
One scenario is that (if you are using MAM) if an automatic notification is created in back-end, the above steps give a missing sync key error.
Best Regards,
Subhakanth -
my ipad keyboard suddenly is missing the tab key. what happended?
As explained in the first step of the article posted, you need to set up your Firefox Sync account before moving forward and be able to add a new device.
If you did set up an account in the past, you would need to select "Connect" and then search for the link "I don't have the device with me" at the bottom of the 3 boxes.
Make sure that you have the Sync Key handy. If you have lost it, you would need to press the "I've lost my Sync Key" and follow the steps. This will erase all the information in your Sync server. -
Password key missing from Registry
Hi,
I have a 3rd party application running in Windows2008 Server-Std SP2
where on each time this apps launched, It will read/update the registry file
which contains below info. This setting is required for a remote DB connection.
On each connection the password field will go missing from registry config which
requires need registry the regedit manually again. We have been running this
apps for a long time Windows 2000 & Windows2003 for a very long time.
Need help on how resolve this issue in W2008Srv
Registry
Config
HKLocalMachine ->Software
->AppsName
Provider=MSDAORA.1;Password=abc;User ID=abc;Data
Source=www
* Missing password param on each connectionNot sure how reliable this workaround would be however, worth giving a try
You can use Group Policy Preferences to push the registry keys
http://technet.microsoft.com/en-us/library/cc753092.aspx
Here's an nice article with snapshots on usage of Group Policy Preferences to configure registry item
http://www.unidesk.com/blog/gpos-set-custom-registry-entries-virtual-desktops-disabling-machine-password ( the example mentioned in
the article is irrelevant, use the method to configure/push desired registry item)
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own and posted AS IS. -
Sync key missing in replicaion database
Hi All,
Firt of all, the Infos:
1) I´m running on MI 2.5 Sp 009;
2) My BAPI Wrappers are on the MI server and they call transacions in the backend system (R/3 4.6c);
3) I have a SyncBO type S01;
4) My client is AWT version;
5) I have only 3 wrappers : GetList, GetDetail and Modify;
The Problem:
When I call the Functions GetList and GetDetail via the transaction se37 or via the mobile, it works just as expected (return the data). Then When I call the function modify via se37 it works fine but when it is called by the mobile the worklist monitor (merep_mon) show the error "Sync key XXX missing in replicaion DB".
Always when I call the MEREP_EX_REPLIC, it return me the 0 records, but I get the data in the mobile client. I believe that can be a problem in the BAPI wrappers code, so their code is attached to analisys.
GET_LIST :
FUNCTION zmob_bwp01_getlist.
*"*"Global Interface:
*" TABLES
*" T_TOP STRUCTURE ZMBWP_HEADER
*" RETURN STRUCTURE BAPIRET2
* Workitem related data.
DATA: t_worklist LIKE swr_wihdr OCCURS 0 WITH HEADER LINE,
return_code LIKE sy-subrc.
* Get Workitem header
CALL FUNCTION 'SAP_WAPI_CREATE_WORKLIST'
DESTINATION 'D01CLTN110'
IMPORTING
return_code = return_code
TABLES
worklist = t_worklist.
REFRESH t_top.
LOOP AT t_worklist.
MOVE t_worklist-wi_id TO t_top-workitem.
MOVE t_worklist-wi_text TO t_top-subject.
MOVE t_worklist-wi_prio TO t_top-priority.
MOVE t_worklist-wi_forw_by TO t_top-forwby.
MOVE t_worklist-wi_cd TO t_top-sent.
APPEND t_top.
ENDLOOP.
* Set return code to RETURN table
IF return_code = 0.
MOVE 'S' TO return-type.
ELSE.
MOVE 'E' TO return-type.
ENDIF.
MOVE return_code TO return-number.
APPEND return.
ENDFUNCTION.
GET_DETAIL:
FUNCTION zmob_bwp01_getdetail.
*"*"Global Interface:
*" IMPORTING
*" VALUE(I_MANDT) TYPE ZMBWP_HEADER-MANDT
*" VALUE(I_WORKITEM) TYPE ZMBWP_HEADER-WORKITEM
*" EXPORTING
*" VALUE(E_TOP) TYPE ZMBWP_HEADER
*" TABLES
*" T_010 STRUCTURE ZMBWP_ITEM
*" T_020 STRUCTURE ZMBWP_DESC
*" T_030 STRUCTURE ZMBWP_ALT
*" RETURN STRUCTURE BAPIRET2
DATA: alternatives LIKE swk_decialts OCCURS 0 WITH HEADER LINE,
description LIKE tline OCCURS 0 WITH HEADER LINE,
workitem LIKE swr_wihdr-wi_id,
subject LIKE swr_wihdr-wi_text,
forwby LIKE swr_wihdr-wi_cd,
sent LIKE swlwi_disp-wi_forw_n,
status LIKE swr_wihdr-statustext.
* Get Workitem detail
CALL FUNCTION 'ZMDK_WORKITEM_GETDETAIL'
DESTINATION 'D01CLTN110'
EXPORTING
workitem_id = i_workitem
IMPORTING
workitem = workitem
subject = subject
from = forwby
sent = sent
status = status
TABLES
description = description
alternatives = alternatives.
IF sy-subrc EQ 0.
* Monta saida E_TOP
e_top-workitem = workitem.
e_top-subject = subject.
e_top-priority = '5'.
e_top-forwby = forwby.
e_top-sent = sent.
* Monta tabela T_010
t_010-workitem = workitem.
t_010-subject = subject.
t_010-forwby = forwby.
t_010-sent = sent.
t_010-status = status.
APPEND t_010.
* Monta tabela T_020
LOOP AT description.
t_020-workitem = workitem.
t_020-seq = description-tdformat.
t_020-description = description-tdline.
APPEND t_020.
ENDLOOP.
* Monta tabela T_030
LOOP AT alternatives.
t_030-workitem = workitem.
t_030-altkey = alternatives-altkey.
t_030-alttext = alternatives-alttext.
APPEND t_030.
ENDLOOP.
* Set return code to RETURN table
MOVE 'S' TO return-type.
MOVE sy-subrc TO return-number.
APPEND return.
ELSE.
* Set return code to RETURN table
MOVE 'W' TO return-type.
MOVE sy-subrc TO return-number.
APPEND return.
ENDIF.
ENDFUNCTION
MODIFY :
FUNCTION zmob_bwp01_modify.
*"*"Global Interface:
*" IMPORTING
*" VALUE(I_TOP) TYPE ZMBWP_HEADER
*" TABLES
*" T_010 STRUCTURE ZMBWP_ITEM
*" T_020 STRUCTURE ZMBWP_DESC
*" T_030 STRUCTURE ZMBWP_ALT
*" RETURN STRUCTURE BAPIRET2
DATA: return_code LIKE sy-subrc,
new_status LIKE swwwihead-wi_stat.
DATA: message_lines LIKE swr_messag OCCURS 0 WITH HEADER LINE,
message_struct LIKE swr_mstruc OCCURS 0 WITH HEADER LINE.
CLEAR: message_lines, message_struct.
REFRESH: message_lines, message_struct.
DATA: wa TYPE zmoblog.
CONCATENATE sy-datum sy-uzeit INTO wa-datetime1.
CONCATENATE t_010-workitem t_010-decision_key INTO wa-message.
INSERT INTO zmoblog VALUES wa.
CALL FUNCTION 'SWK_DECISION_COMPLETE'
DESTINATION 'D01CLTN110'
EXPORTING
workitem_id = t_010-workitem
language = 'PT'
user = sy-uname
decision_key = t_010-decision_key
IMPORTING
return_code = return_code
new_status = new_status
TABLES
message_lines = message_lines
message_struct = message_struct.
* Set return code to RETURN table
IF sy-subrc EQ 0 AND return_code = 0.
MOVE 'S' TO return-type.
MOVE return_code TO return-number.
ELSE.
MOVE 'E' TO return-type.
MOVE return_code TO return-number.
MOVE sy-subrc TO return-message.
ENDIF.
APPEND return.
ENDFUNCTION.
What can I do? Any ideas?
Thanks in advance,
RafaelHi Rafael,
What i meant actually is for S01 it doesnot update the RDB when you execute transaction MEREP_EX_REPLIC, instead the replicator is called during each sync and it communicates with the backend only during sync.So it does uses the replicator but only at Sync.So looks like there is some data inconsistency that throws the error "Sync key XXX missing...", this could happen if the SyncBo mapping is changed after the Sync. Try resetting the RDB by executing the Function Module MEREP_RDB_S01_RESET with SCENARIO = <Your SyncBo>.Before that disable the SyncBo for synchronizing and after resetting, reset your mobile device too by Undeploying and deploying the application again.
See if it helps.
Thx
Gisk -
My brother uses JAWS screen reader; he relies a lot on the "application" key. But his new Lenovo Thinkpad e531 is missing this key.
Do you have any solutions for this problem? Because my brother is blind and cannot see the screen nor use the mouse. He cannot access the options of the missing "applications" key (mouse right-click options) without having a specific key to press.
I believe this is a violation of the ADA, and Lenovo should have a solution for it, or to work very fast on one.
I appreciate any input on this issue.
Thank you,
Angelfly525Hi Dennis ,
Thank you for your posting!
According to your description, my understanding is that you want to get the Published links using Office 2013 on client.
Yes, you can get the Published links using Office 2013 on client. For achieving your demand, you need to have the 15.0/Common/Portal registry key setup with a PersonalSiteURL defined . For detailed information,
you can refer to the article and note that everything is 15 instead of 12 now:
http://paulliebrand.com/2009/08/25/publishing-links-to-office-2007-without-enabling-my-sites-in-sharepoint/
Also the comments of the blog is helpful:
http://paulliebrand.com/2011/09/27/set-as-default-my-site-sharepoint-sites-or-my-sharepoint-sites-missing-in-office-2010-on-sharepoint-2007/
Thank you for your understanding and support.
Best Regards,
Eric
Eric Tao
TechNet Community Support -
QT-7 Pro Registration Key Missing! Poor on-line help.
I paid.
The email came.
The Registration Key was missing from the mail.
Checked email source - nada.
Checked "Downloaded Software Purchases" page - nada
Combed Support pages - NO EMAIL SUPPORT FOR QT!
I'm currently in a country with no Apple Store or Apple phone support.
PLEASE someone tell me something I could do to recover this key...
Thanks, and have a VERY nice day!
AsokaSIGH!!!
Going by the international call charges in Sri Lanka, it may well be cheaper to pay afresh for a new Pro key! I guess I could Skype them and hope the nice person at the other end will be patient with the latency!
This QT Pro key issue is a glaring-thorn-in-the-side of Apple's well laid out web-store. I just can't understand why they would not have an auto-resend feature. But then again, the page that lists my purchase (its also supposed to display the Key) has only what I received in the email. No key. What's needed is a key-regeneration feature. From all the posts I have scrutinised on the topic, it seems that the transaction is being closed before key-generation, in some instances.
I did give them some feedback in their website feedback page, but Apple seems deaf all too often.
Thanks for your input! -
Scroll Lock key missing on a W540
Well, we do have many things missing on this Workstation (see other comments), but here is the latest discovery.
All last week I needed to do some cross referencing of Excel worksheets and Access databases. I use "Synkronizer", and excellent Excel comparator who's author fears piracy and links the application to the machine and checks EVERY USE!. So I'm not at liberty to move the application easily.
When needed I export an Access table to Excel, and compare, merge, etc, then reimport into Access or work in Excel.... Long story. BUT the issue. ^K (Ctrl-K) which is the cryptic Scrl-Lock key on this so called workstation with 4 dumb wasted keys in the upper right hand, does not work within two Excel sheets.
The work around is within Excel, using [Syncronized Scrolling], and [View Side by Side]. BUT now it forces an horizontal scroll, when a vertical would be desireable. What a pain!
After I got back, I tested the same thing on my desktop, WITH A REAL SCROLL LOCK KEY, and it worked correctly.
If there was a REAL scroll-Lock key on the W540, this would not be an issue.
What is the point?
The W540 is NOT a Workstation. If you do not program, work in Excel or Access, then this is a moot point. The W540 is a dumb terminal for cloud applications, surfing, eMail, watching YouTubes and videos.
For this one, there is really NO workaround.
Am I wrong? Has someone tested the multiple windows scrolling on Excel, and locked from the keyboard two sheets? I also discovered a similar issue when comparing two ASCII files in my editor.Yes, I noticed this as well. The workaround I have is, go to Windows and search for "On Screen". You will get to the On Screen Keyboard where you can toggle the Scroll Lock.
-
Yoga 3 Pro - Certain Keys Missing from Keyboard. How to virtually use them?
Hi.
I have bought this for about a week and was not happy about the combination of "Home" and "End" keys since I use them a lot. In using VMWare I noticed there is no "Insert" key on the keyboard at all, thus I cannot use the Ctrl+Alt+Insert functionality in my virtual machines. Today, a random combination of keys was pressed on the keyboard and the "Scroll Lock" was enabled, and guess what: There is no scroll lock in the Yoga 3 Pro! Now I have no idea how to disable this again and non of the forums or manuals have addressed this.
(Lenovo design team has made is specifically hard for users. Not only the keyboard layout and certain keys are removed, but even I cannot find a spare chargin cable for my officec. They have changed everything - even Yoga 2 Pro charging cable is not compatible - and yet not available in the market. Not a very smart strategy )
Solved!
Go to Solution.Welcome to the forum!
I'm sorry to hear about your problem. I had to really take a look at my own Y3P to realize there is no Insert key, I guess I got too used to the touchscreen
To get rid of the Scroll Lock you can press the combination Fn+C.
Alternatively you can also go to the Control Panel, then "Easy of Access Center" and start the On-Screen Keyboard, you can disable the Scroll lock from there too.
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество -
Hi guys,
I face issue when i provision resource, i checked and it doesn't works because when resource is provisioned ORC_KEY in OIU table is not setted and i don't know why.. Resource is created in "Ready" state.
This is what i do:
ResourceData resData = moUserUtility.provisionResource(UserKey, 522);
String userOiuKey = resData.getOiuKey().toString();
String userObiKey = resData.getObiKey().toString();
$logger.debug("provisionUnipassResource - Getting userOiuKey : " + userOiuKey);
$logger.debug("provisionUnipassResource - Getting userObiKey : " + userObiKey);
//Getting objectKey of userObjectInstanceKey
String ObjectKey = "";
String ProcessInstanceKey = "";
tcResultSet resultSetObjects = moUserUtility.getObjects(UserKey);
for (int i1 = 0; i1 < resultSetObjects.getRowCount(); i1++) {
resultSetObjects.goToRow(i1);
ObjectKey = resultSetObjects.getStringValue("Object Instance.Key");
ProcessInstanceKey = resultSetObjects.getStringValue("Process Instance.Key");
if (Long.valueOf(ObjectKey).equals(userObiKey))
$logger.debug("provisionUnipassResource - ProcessInstanceKey found with value [" + ProcessInstanceKey + "] for ObjectKey [" + ObjectKey + "]");
break;
//Add form datas
if ("".equals(ProcessInstanceKey)) {
$logger.debug("provisionUnipassResource - Can't find ProcessInstanceKey");
return "KO";
else {
long LongProcessInstanceKey = Long.valueOf(ProcessInstanceKey);
moFormInstanceUtility.setProcessFormData(LongProcessInstanceKey, resourcetHash);
$logger.debug("provisionUnipassResource - Resource has been created");
return "OK";
Is someone can help me? May i do something wrong?
Thanks in advance for your help
Edited by: 993041 on 11 mars 2013 05:34
Edited by: 993041 on 11 mars 2013 05:34Hi guys,
I face issue when i provision resource, i checked and it doesn't works because when resource is provisioned ORC_KEY in OIU table is not setted and i don't know why.. Resource is created in "Ready" state.
This is what i do:
ResourceData resData = moUserUtility.provisionResource(UserKey, 522);
String userOiuKey = resData.getOiuKey().toString();
String userObiKey = resData.getObiKey().toString();
$logger.debug("provisionUnipassResource - Getting userOiuKey : " + userOiuKey);
$logger.debug("provisionUnipassResource - Getting userObiKey : " + userObiKey);
//Getting objectKey of userObjectInstanceKey
String ObjectKey = "";
String ProcessInstanceKey = "";
tcResultSet resultSetObjects = moUserUtility.getObjects(UserKey);
for (int i1 = 0; i1 < resultSetObjects.getRowCount(); i1++) {
resultSetObjects.goToRow(i1);
ObjectKey = resultSetObjects.getStringValue("Object Instance.Key");
ProcessInstanceKey = resultSetObjects.getStringValue("Process Instance.Key");
if (Long.valueOf(ObjectKey).equals(userObiKey))
$logger.debug("provisionUnipassResource - ProcessInstanceKey found with value [" + ProcessInstanceKey + "] for ObjectKey [" + ObjectKey + "]");
break;
//Add form datas
if ("".equals(ProcessInstanceKey)) {
$logger.debug("provisionUnipassResource - Can't find ProcessInstanceKey");
return "KO";
else {
long LongProcessInstanceKey = Long.valueOf(ProcessInstanceKey);
moFormInstanceUtility.setProcessFormData(LongProcessInstanceKey, resourcetHash);
$logger.debug("provisionUnipassResource - Resource has been created");
return "OK";
Is someone can help me? May i do something wrong?
Thanks in advance for your help
Edited by: 993041 on 11 mars 2013 05:34
Edited by: 993041 on 11 mars 2013 05:34
Maybe you are looking for
-
Can I install two different RAM sizes in my Early 2011 Macbook Pro 2.0 GHz
I just bought me a 8 GB 1333 Mhz RAM for my Macbook Pro. I installed it in slot 2 and I installed the stock 2 GB RAM in slot 1. Is my decision good to have two different sizes RAM in my computer. It is showing me I have 10 GB RAM in my system, and I
-
File Import Bookmarks is not working
I have latest version of Firefox 5.0 I click File > Import > Opera (or any other selection) click Next and nothing happens.
-
Speaker cannot be detected (occasionally)
Hi, I have connected a Creative I-Trigue 200 to my new PC, just to have some basic sounds/music (I am not really particular about sound quality). However, it seems that the PC sound card occasionally can detect the speakers, but sometimes it does not
-
Using ID 5.0.4, WinXP SP2, I still can't get page numbering to work properly. I've added three chapter files to a book.indb file. The book tab shows: 1-20 for Chapter 1 1-18 for Chapter 2 1-20 for Chapter 3 The page counts are correct, but the book t
-
Can any one please help me with two frustrating issues: 1) Is there a way to set up a secure login page within the actual website? I don't want to secure the entire site, just some pages within it. I've looked through all the help pages and I can fin