Keys Off Center with Aluminum

Hello all,
I recently purchased a new 13" Macbook Pro Retina.  This is the one with the force trackpad, so I guess it is a "2015" model.  Anyway, the laptop has been working perfectly and I love it except for one thing.  They keys don't seem to be centered in their aluminum slots.  I.e. the gap on the left side of aluminum to key is wider than on the right, and hence the backlight shows much brighter when viewed at a left angle.
It is a small thing, but kind of annoying.  Anyone know if this is normal?  Is it something that can be easily fixed, or am I just being... well obsessive ;-).  I do have Apple Care on it but am not sure that would help.  I really do not want to return it in full.

Ignore this topic. It was only the plastic film that distorted the display. hehe

Similar Messages

  • Anchor is taking assets off center with Scroll Motion effect.

    I have built a Onepage Website with Scroll Effect. When I reach the Share Anchor, i've got a bug with the element appearing with a Scroll Effect. You can create the bug by reaching Share Section, and by clicking on the Share menu another time. You'll see the Asset going off center with different browser Size.
    My anchor si set to -480px on a 960 artboard with a 1920 centered assets.
    http://litecoaching.businesscatalyst.com/
    Thanks for the help

    Specialcase has a very interesting site over Motion.Among other things you'll find Illustrator paths.Look if they can help you.The link is: http://www.motionsmarts.com/downloads.html
    P.S. While you'll at it, visit the tutorials as well.Very good work.

  • Printing off center with splix and gdi drivers

    I was just installing cups to get printing working with my Samsung ML-1740 printer. There are two drivers, I found, available for it splix and gdi. Splix is supposed to be the better driver, but I found both print pages off center, to the right, splix more so (about 1/8 inch) than gdi. Is there anyway to correct for this globally on my system? I'd rather not have to modify the margin settings in every document manually. Or is this just a bug and going to have to be addressed by the authors of the drivers?

    When printing using Acrobat Reader, the problem with me was DOH, the paper was jiggling around in the paper feeder. I tightened up the guides and got better results sideways, and ok with the length.
    However, the person I am doing the job for continued to have problems, and it was not until he sent me a printout from his HP all in one printer that I suspected that his cheap printer was trying to HELP matters.
    I had run the background color full bleed to the very edges of the paper. Easier to find out where the off center problem was. He was pretty good on the vertical centering, but the bottom of the card really showed a distinctive problem. The ink stopped printing at EXACTLY the usual 1/2" margin on the bottom, where one would normally break apart or trim the cards. In addition, the HP apparently pulled this edge 1/8" up. I think the HP was trying to HELP us idiots from running the live area (ie, type) right to the crop edges.
    So, I changed the design, removed all physical crop marks (used only for gauging how the pages were printing in relation to the scored biz card stock) and removed the background color bleed from the bottom...actually redesigned all cards so there would be no bleeds at all, He seemed to think that solved the problem, and the HP did not feel inclined to help. And it did not vertically shrink the pdf image to the safe live area.
    It's hard dealing with someone with very rudimentary skills in these things. Even phone conversations weird. He didn't understand that all the ten cards were now one pdf image, and that Avery template would not help in this case.
    He's waiting to get more card stock for his biz cards, and will finally see if it printed right for him.

  • Macbook Pro Off-Center on LCD TV

    I am wanting to use my Macbook Pro hooked to a Samsung 32" LCD TV as a secondary display. When I attempt to set the Samsung resolution to 1360x768 in Mac's display preference, the image is off-center with a black band down the left side of the tv. I have used the dvi to vga supplied with my macbook, and have vga going into the set. When i set the resolution to 1024x768 the image is centered (but stretched).
    Anyone else seen this? Any suggestions? I have searched the forum and the entire interweb, but cannot find anything.
    Thanks!

    Yes, DVI-to-HDMI is probably your best bet.
    http://www.bestbuy.com/site/olspage.jsp?skuId=7750034&type=product&id=1140394359 520
    I've even seen them at Target...

  • I'm on Mac OS lion and since your new upgrade, the page loads of center, with no scroll bar. On every computer I run I have to resize the page for the page to load correctly. How can I fix this?

    I'm on Mac OS lion and since your new upgrade, the page loads off center, with no scroll bar, this happens on every computer I run.
    In order to have the page load correctly, have to manually resize the page.
    How can I fix this?

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    See also:
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • I can't turn off wifi with Control Center

    I can't turn off wifi with Control Center after updated ios 7.0.6

    It's running
    I already checked dmesg and nothing happens. It works with Vista, so...
    With my old laptop (it's the same model) brightness didn't work, and now this. I guess i'll wait for a new update

  • Why does my keyboard repeat keys and the screen goes off center?

    Keyboard repeats letters, erases multiple letters and generally goes crazy. Also screen goes off center and too large for frame.

    First see:
    iPhone and iPod touch: Home screen icons are magnified or large
    Next try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • PSD CS4 - Cursor is off center, help!

    When I am using any tool (Smudge, Brush, Pen, etc.) in PSD CS4 (Mac 10.5.8) my tool is off center.
    Here is an example: I have a blank white page and a brush tool (200 pixels, 100% hardness) with the color black assigned to it and I click in the center of the page to create a round dot. The dot is not on the spot where I clicked, instead it shows up below the point where I clicked, about 10 pixels off center. It's always 10 pixels off center no matter how big the brush.
    It's impossible to work this way. I am at a total loss as to how to fix this problem. I've Googled and searched the Adobe Forums and can't find a solution.
    Photo of my problem is attached.
    Thank you from desperate, aka Dimitry

    Rotate through the Screen Modes by hitting the key F three times.
    Edit: The error happens when opening a file or creating a new file in Full Screen Mode.

  • The screen is locked on and off center toggle switch is off does anyone have any suggestions

    My older ipod shuffle is locked on and the screeis a little off center I've tried most all of the common solutions . Has anyone experienced this problem?

    When you say the only tool available was to restart... do you mean Disk Utility wasn't there?
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    I also tried safe booting and holding down the options key..
    Shift key invokes a "Safe Boot", the Option key should bring up the Boot Options screen where available boot drives are shown.
    Do you have another Mac with Firewire around and does this one boot into FireWire target disk mode...
    http://support.apple.com/kb/HT1661
    If so this Mac will look like a big Firewire drive to the other one, and if the other one is the same OS or higher you can try Disk Utility on the other one to attempt repair of the iMac's drive.

  • Envy 4500 Printing Envelops 'Off Center'

    I'm seeking some information regarding the printing of envelopes on the aforesaid printer which I just purchased yesterday. Printing envelopes is an issue pertaining to line straightness. Some envelopes print off center (No. 6). Envelopes are inserted correctly and in center. However, the tray guides seem to be a little off center. Printing envelopes can even be printed with the flap on the right side, so I cannot understand why the manual states for the flap to be on the left. Another facet is that the print on the envelopes is darker and not as sharp when printing on paper, unlike the C4680 which printed sharper.  Any assistance is truly appreciated. Thank you very much. P.S. - By the way, the 4500 is somewhat slow on startup, unlike the C4680 I previously owned. To scan an item, you must press the button 3 or 4 times to scan; again, unlike the C4680. The HP solution center which was part of the C4680 was a most useful tool. However, the 4500 employs a more intricate means to accomplish, and configure settings.

    Update: Printing envelopes has reverted back to off center print. In printing with the flap on the right places the addresses upside down with flap in wrong direction. A. HP wished to install 'generic' drivers. I said no. B. HP wished to do a remote. C. HP tried to use the same principles (policy) to allow the printer (Envy 4500) to print correctly. All the steps (around 6 or 7) are meaningless and really serve "no" purpose for a defective printer.  I'm returning due to the fact that I cannot print business envelopes correctly. This facet is a key function for me. I do not at all appreciate uneven or tilted print.

  • 2013 27" iMac using mini displayport to VGA, external monitor off center.

    I recently purchased a new 2013 iMac 3.5 i7 and connected two external monitors. The minidisplayport to DVI adaptor works fine on one monitor but the minidisplayport to VGA is off center on the 2nd monitor. There is a 2" black band on the left side of the screen. I've replaced the adaptor, cable and tried on two different monitors. I've also tried repositioning image in the monitor settings which it can't move far enough. It only happens on 1920 x 1024. Any other resolution is fine. Other than that it works fine, but this space is going to drive me nuts. Because these are 23" monitors I really would like the highest resolution possible. I'm stuck. Any thoughts?

    Update: I switched to DVI and it worked perfectly. I guess there could be an issue with the mini displayport to vga adaptor on the 2013 iMac. I also tested it on a 2012 mac mini and the vga operated as it should.

  • Macbook Pro to TV via HDMI - image way off center

    Early 2008 15-inch Macbook Pro to TV via HDMI worked at first, now image is way off center on TV (like only showing a sliver of the computer image at the edge of the TV screen). Philips says it's an issue with the computer settings, not the TV. Any suggestions?

    Hello clamb1993,
    Thank you for using Apple Support Communities. 
    You can use the following article to troubleshoot your HDMI out connection:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Regards,
    Jeff D. 

  • Open Dialog Box file preview displays the images out of view or off center

    This is a relatively new problem and I cannot figure it out! When I go to open a file through Illustrator (using column preview) normally off to the right side there is a preview of the file. However now I can only see a tiny portion of the image like it's off center or something (see the far right side of the picture below. What is even more strange is when I open a file in Finder, the preview is normal. Any ideas on what it could be??
    Thanks!
    Lauren

    JMcd wrote:
    I am having the same problem! I just upgraded to OSX Yosemite 10.10.3 - I wonder if it is a bug with that.
    this is the only common factor, so we can only assume this is the case. there is no other information on this as far as I know.

  • My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

    My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

    Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
    In other words, your computer can't talk to your operating system so you can't access your data.
    Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
    First: Shut down your computer completely
    Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
    Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
    If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
    If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
    Hope this helps, it's annoying but it's your safest bet.
    All the best.

  • Lightroom printing is off center

    Hello all,  I just replaced my home computer after it got fried from an electrical surge.  While I was at it, I moved from a PC with XP to a Mac Pro with Snow Leopard.  I had to transfer my Adobe License for Photoshop too and moved to CS5.  The move has been great so far,  but when I print out of Lightroom 2.7 with my Epson 3800 my prints are either off center or off the page.  Printing with my previous PC setup was perfect and now I am totally baffled.  I am in a bit of a time crunch too,  as I need to get a photo shoot printed and delivered to a client.  I even thought about dowloading the Lightroom 3 Beta to see if this would give me a temporary solution.  Any one have any ideas?  I have been searching the web for a few days looking  for a solution and my tech person is baffled too.
    Many Thanks,
    J. Paul

    Make sure to visit the Page Setup dialog and select your printer model (3800) from the "Format For" popup menu, and the page size from the "Paper Size" popup menu:
    See suggested steps here:
    http://people.csail.mit.edu/ericchan/dp/Epson3800/printworkflow.html#lightroom
    and
    Mac screenshots here:
    http://people.csail.mit.edu/ericchan/dp/Epson3800/Print3800MacColor.zip
    Then set the margins appropriately in LR's Layout tab.

Maybe you are looking for