Keys won't light up and strange noises!
Hi everyone,
I got my MacBook Air last October. A month or two ago i was getting a strange whirring noise much like a hard drive spooling up, and this was happening every time i used the computer. I thought that it had a solid state hard drive so i shouldn't hear this sort of noise at all? Anyway, just as i was about to book it in to go to the Apple Store and see someone about it, it stopped doing it. Two days ago it stared doing it again, and now my keys don't light up at all.
Anyone got any ideas?
thanks in advance!
Hi zarnd,
If you've confirmed that you have a SSD in your machine then you are correct, the SSD shouldn't make any noise. There are no moving parts inside the drive, so you won't hear whirring noises. The only whirring noise would be isolated to the single fan unit inside the machine.
When you go to enable the keyboard backlight, what exactly happens? If you go into System Preferences > Keyboard & Mouse are you able to check the box that's marked: Illuminate keyboard in low light conditions.
I still think a GB appointment is in order for the machine, even to have them run some diagnostics.
Similar Messages
-
Intel iMac won't light up and continues to make three load beeps.... What's that about, never happened before.
Hello, sounds like bad RAM...
The following table lists the new tones and their meaning:
Tone(s) Description
1 tone, a 5-second pause, repeat No RAM installed
3 successive tones, a 5-second pause, 3 successive tones RAM does not pass data integrity check
1 long tone when holding down the power button Firmware upgrade in process. See About firmware updates for Intel-based Macs for more details.
3 long tones, 3 short tones, 3 long tones Firmware restoration from CD in process. See About the Firmware Restoration CD (Intel-based Macs) for more details.
http://support.apple.com/kb/HT2538 -
MSI z77A-G43 C1E enabled and strange noise from cpu area ?
MSI z77A-G43 C1E enabled and strange noise from cpu area ? What will be the problem? When I disabled it there is no sound. BUt when I enabled it there is a strange noise while moving my mouse cursor or when there is some CPU activity, sounds like a squeeking or scratching, a bit like hdd activity, but barely noticeable. It looks like it's coming from the area around the cpu socket, must be something on the motherboard. is there a solution other than just disabling it? I want to be able to make C1E enable but cant bare this noise so I have to turn it of....
Sound like some electrical sound produced by current going through that area.
Try contacting MSI support for more help.
>>How to contact MSI.<< -
my eraphone of my iphone 4s white unlocked make strange noises during the call and still doing the noise like an interference or saturing the spekaer
This is a common problem with iPhone 4s (and IOS 5) There isn't ' anything you can do about it, so you're best bet is to go down to the store and get an exchange. If you have an older iPhone (3gs/4) roll back your update from IOS 5 to IOS 4.
-
I pushed the power button and now the screen won't light up and the keyboard lights a on
Have have purchased a MacBook Air 13" and as I went to go turn the volume up, I pushed the power button instead, now the display is black and the keyboard lights are still on! I don't no what to do plez help
In OS X Mavericks behavior of the power button changed.
Power button /sleep function
http://support.apple.com/kb/HT5869
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Best. -
Qosmio G10: Write failures, strange noises & system locking on
Hello
Im currently away on holiday with my Laptop and im having write failures and strange noises coming from system speaker and the system keeps locking up.
Any ideas??Hi
My first suggestion is to recover the OS with Toshibas delivered recovery CD. -
Strange noise and flashing lights -- can this be battery/power-related?
I have had two occurrences of a very strange sound and never-before-seen flashing of a light on my TiBook. Here is what happened:
I recently got a new battery (a NewerTech Extend 4800) for my 3 year-old PowerBook. I carefully followed the directions that came with the battery and installed it, then plugged in the power adapter to charge it up. I then started the computer so I could see the battery’s progress. Upon start-up, a “whooo” sort of sound came out of the computer for a few moments and the little sleep indicator light flashed several times (as did the apple light on the back of the computer lid). Nothing appeared to be out of order and the computer started normally otherwise. I was able to monitor the battery’s progress and since everything seemed to work normally and no one I talked to seemed to think I’d damaged anything, I just used the computer normally for the next two weeks with no problems.
Then last night the computer just shut down all by itself – I did not put it to sleep and it is not set to go to sleep on its own (my power saving setting is only set to dim the screen), nor did I click “shut down.” I thought perhaps somehow the power cord had not been attached and the battery had run down, although the new battery has been warning me properly when the battery is getting low, so that doesn’t make sense. It would not wake, so I restarted it. Upon restart, the same noise and flashing light situation occurred again.
I called the company that sold me the battery and the tech guy’s suggestion there was to reset the PMU and he gave me an Apple article to instruct me on how to do that. I have done that, but there is no evidence that that has solved whatever the issue was. I am hoping that someone can identify the sound and lights pattern and advise me as to whether it is some more serious issue, or if it’s nothing to worry about. It has been suggested to me that it is possibly a power adaptor issue, but since I’ve run down and recharged the battery without incident several times in between the two occurrences, that doesn’t seem logical either. Is there a known signal a computer makes when there is some power/charging issue?
Thanks for any help you have or for at least posting if you have had a similar experience. So far, no one I’ve talked to has ever heard of this before.
15" Powerbook G4 (tiBook), 1 Ghz, 1 GB, Super Drive Mac OS X (10.4.3)Hi ChloeB,
Your description of the "moaning" sounds at startup sounds like something I'm dealing with. I came across the following post by EWW in the "My Powerbook Won't Start Up". I recommend the link and wish to specifically credit EWW with the posting, as I found it helpful. The URL is
http://discussions.apple.com/thread.jspa?threadID=380101&tstart=0
Begin Pasted Posting
Hi, limberlingo, and welcome to Apple Discussions.
Power On Self-Test Beep Definition - Part 2 (Oct. 1999 and later Macs)
http://docs.info.apple.com/article.html?artnum=58442
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
Your Powerbook is not detecting any good RAM at startup. This may indicate that your RAM (all of it — do you have one module or two installed?) has gone bad, or that it isn't seated properly. The first thing to try is reseating it: remove the module(s) and then reinsert it(them). Then try starting up again. If that doesn't do the trick, and you have only one RAM module, it's probably bad and will have to be replaced. A single RAM module having intermittent problems before failing completely (as it apparently has now) would account for all your problems.
If you have two modules, it's much less likely that both of them have failed or loosened in their slots simultaneously. Post back with results of your testing.
End of Pasted Post by EWW
There's another thread I found where one of the causes of a three-tone warning was found to be a pinched ribbon cable coming off the bottom of the trackpad. You can find that in the thread titled "Solution to Freezes Caused By Ribbon Cable" - - the information provided by Marc Posner, Anthony Brade and others.
The URL is
http://discussions.apple.com/thread.jspa?threadID=228678
Hope this helps.
Paratus -
My BB won't turn on the red light flashes and the key's light up
Hi
I have read all posts relating to my problem, but one thing my BB won't do is resgister on my computer. The phone will not turn on, has the red light flashing and the keys light up, but the screen will not come on. I have tried taking the battery out, charging it all night, all the recommended/ideas from this sight, but no joy. I have only had this phone since July last year. I haven't been able to try updating phone etc as it won't register on my or my husbands computer please help
LouiseHi,
The way you presented it made me think it had just happened.
So you have had the phone since July has it ever worked?
Most likely you are missing some or all of your device OS and you'll need to reload the device.
Because the phone can't generate enough signal you will have to "force detect it". I've attached the link below. If you want to proceed I'll need what version of Device OS and what version of desktop manager software.
Thanks,
Bifocals
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB03295 How to verify which version of BlackBerry smartphone software is installed on the computer using BlackBerry Desktop Software
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
My probably 10 year old MaycBook died. It won't start. When I press the power button, it gets power, but it only lights up and a scratching noise starts like something is spinning. A file folder with a question mark periodically flashes... Help!!!
You don't have a Macbook if you are running OS 9 and it's 10 years old. The first Macbook is an Intel Mac that came out in 2006 running 10.4.x. You most likely have a Powerbook. Try posting in the Powerbook forum.
A flashing question mark appears when you start your Mac -
my new 3 month old imac 27 with 10.6.8 snow is giving a **** of noise from the fan. suddently starting after today starting up. and the volume buttoms and screen lights up and down not working any more.. any one who can help here???
Try an SMC Reset. (System Management Controller)
Shutdown>unplug from power for ten minutes>press and hold in the power button for ten seconds>startup again.
Also try a PRAM Reset. (Parameter RAM)
Shutdown. At the bootup chime, hold down CMD-Option-P-R together, wait for two more chimes, total three, then let go of all keys to finish booting,
If this doesn't do it, run the Hardware Test in Extended
http://support.apple.com/kb/ht1509 -
my ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!
Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
Message was edited by: michael08081 -
Tried charging my 2009 MacBook Pro but the green light won't turn on and now my computer won't turn on (it was working right before I attempted to charge it!) what do I do????? Even tried using another charger I had for it and nothing. No green light. Computer turn on. Now what??? Help!
QUOTE: "No green light. Computer turn on."
What? so were you able to turn on the computer with the new plug? does it give you any other light? amber/orange light? -
My 1 year old Macbook Pro which ran out of warranty this month on the 3rd of June, won't turn on and when I plug in the charger, there is no charging light and it won't turn on. Can someone tell me what I should do? Has it died? It's only new! And I've never dropped it. Will I loose all my data? Help!
Try here > Troubleshooting: My computer won't turn on
And here > Apple Portables: Troubleshooting MagSafe adapters
Try the help from the suggestions above.
Hopefully it's nothing serious and you have a backup you can restore from if necessary. -
My computer is running stupid and I am being told by my malware bytes that I don't have any problems and when I try to clear my cache none of the buttons work after show history. THEY are all useless and won't light up to use them. I also have not been able to set up zoho as my default email address for all default emails====windows won't let me even though i disabled windows email, I still can't set up zoho.com
When you use the private browsing feature, Firefox does not keep your history after your session. You don't need to clear history manually, you can just close Firefox.
If you're looking for another way to clear you cache, you can use this one:
Open the Options dialog using either:
* orange Firefox button > Options > Options
* Tools menu (if you have the classic menu bar) > Options
Click Advanced, then on the Network mini-tab look for the Cached Web Content section and click the "Clear Now" button.
If you have a large hard drive, this might take a few minutes.
Perhaps, though, we should step back and ask for a more specific description of running wack. What's going on? -
I dropped my iPhone 4S in the toilet. I dried it and shook out as much water as I could. I removed the SD card and put everything in a bowl of rice. It is still in there and everything appears to be working normally, but it won't shut off and the camera light stays on. I've tried the restart thing where you press and hold the pwr button and the home button. What should I do?
Service and Repair - https://selfsolve.apple.com/ Repair options (require hardware serial number)
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=iph one <-- enter correct country once on page
Maybe you are looking for
-
How to submit the values in the ztable to the line items
Hi everybody Please give me the code to my task I am having a Z Table with one field and with some certain records and i am having an unique value . This unique value should be submitted in all the line items which are having the Z table records
-
Is it possible to embed logo in QR code which is formed as a part of paper forms barcode?
I am trying to embed logo in the QR code. But I am not finding any options for this in LC. Is it possible anyway?
-
Duplication of Records in Address Book on iPad Sync
I have multiple records which have been duplicated in my Address Book on my desktop Mac; I believe it has arisen since I have been synchronizing between desktop and iPad. How can I eliminate these duplicated record entries and stop this duplication?
-
Ipod touch 5th generation itunes wont load
My 5th generation ipod touch will not load itunes
-
Subcontracting GR (Urgent)
Hi Experts, How can we segregate subcontracting MIGO with that of Normal purchase Migo. Please give me field and table. Thanks GR