Keystation 49e toasted after installing Jam Pack

I have an M-audio Keystation 49e that I have used mostly for music composition using my iBook and a nice shareware program, Melody Assistant. Lately my son has been using the keyboard a lot for composition on an iMac using GargageBand. He has been desperate for a JamPack to get better souunds, so I got him the Orchestral JamPack for his Birthday yesterday. The sounds are indeed excellent. However, a little while (~30 min) after installing the JamPack, the keyboard stopped working, first intermittently, like when changing an instrument, then completely. No sound, no indicator lights, nothing getting recorded. Thinking it was a driver problem, I installed the latest M-audio driver I could find (3.1) but no dice. Hoping to debug the issue, I plugged the keyboard into my iBook and now it doesn't work there either! When I try to use Melody Assistant, a weird error message comes up saying "An OS X midi driver has been recognized but gives do information about output destination." I tried our other iMac (without the new JamPack installed), and it doesn't work there either. Looking at the USB section under "About this Mac", the keyboard is being recognized correctly, but it does not seem to be able to send notes to any program on any of our macs. It seems like installing the JamPack has somehow broken the keyboard, but I have no idea how this could be or what to do about it. Any suggestions appreciated!
Intel imac   Mac OS X (10.4.8)  

The M-Audio driver is irrelevant: it is used to recognize extra controls on the more advanced keyboards. The 49e does not require a driver.
Since the keyboard doesn't work on another computer either it seems unlikely that the Jam Pack has got anything to do with it. I would suspect a hardware fault in the keyboard or the lead. Try replacing the USB lead first, then if that doesn't help you may need to see if you can get a repair.

Similar Messages

  • Installed Jam Pack but see no new loops in Garageband loop browser. Why not?

    I successfully installed Jam Pack but don't see new loops in Garageband loop browser. Is there some extra step I'm supposed to do? Before, I had about 57 Rock/Blues loops, and I still have just that. I had 14 instruments under All Drums, and guess what? Still only 14.
    I know the install completed successfully - it said so, anyway.
    Clues?

    Have you filters set on the Loop Browser?  Make sure the GarageBand Preference "Loops > Keyword Browsing > Filter for more relevant content" is off.  Otherwise you will  see a fraction of the available loops.
    To see, if the JamPack has been installed, set the pop-up meu at the top of the Loop Browser to "Rhythm Section". Is that available?
    Did you reindex your Loops after installing the Jam Pack? And did you restart the Mac? In Mt. Lion only restarting a Mac will ensure, that an application is not resumed from a cache, when you launch it again.Restarting the Mac will terminate GarageBand for sure.
    If restarting the Mac does not make the JamPack Loops show, rebuild the Loop index.  See:  Rebuilding the Loop Index in GarageBand 6 or earlier - Apple Support

  • NO CRACKING AFTER INSTALL SERIVE PACK 1 BETA IN WINDOWS 7 ULIMATE 64 BIT

    HNO CRACKING AFTER INSTALL SERIVE PACK BETA IN WINDOWS 7 ULIMATE 64 BIT?HELLO,FROM YEAR WHEN I BOUGHT MY X-FI XTREAM AUDIO PCI VERSION IN MY WINDOWS 7 ULTIMATE,I HAVE ALL TIME TO MUCH CRACKING AND POPING IN SOUND WHEN I PLAY MUSIC O WATCH VIDEO ON MY PC. IT GOT WORST WHEN I USE INTERNET WITH UTORRENT AND SURF ON THE WEB. I TRIED EVERYTHING ON THAT I FOUND ON NET.BUT FEW DAY AGO I INSTALED SERVICE PACK BETA ON MY SYSTEM AND I NOTICED THAT CRACKING AND POOING IS COMPLETELY GONE.NOW I HEAR CLEN AUDIO NO CRACKING WHEN I USE INTERNET OR ANYTHING.
    MY SYSTEM PREFRECE ARE BELOW
    MOTHERBORD :ASUS P5QL-VM EPU
    OS????? :WINDOWS 7 ULTIMATE 64 BIT
    RAM???? :6 GB DDR2 800 MHZ
    CPU???? :Intel Core 2 Quad Q8200, 2333 MHz
    VIDEOCARD?? .NVIDIA GeForce GTS 250
    AUDIO??? .XFI XTREAM AUDIO PCI VERSION

    Costarr628 wrote:
    When I try to open a file, Windows tells me the player is not installed.
    Flash Player is a browser add-on, not an executable program.
    Are you trying to open local SWF files?  If so, you need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html

  • Installing Logic Pro after Garagband Jam Packs, etc. Duplicate files?

    I just purchased Logic Studio 9, and I am about to install it. I also have Garageband, and various Jam Packs installed. I know that Logic uses some of the same files, but I'm concerned that I will have duplicate files taking up premium disk space. Will the Logic installation overwrite the previously installed audio files/loops that were included in the Jam Packs, or will I have duplicate files?

    Can you expand or qualify that response a bit. It would be appreciated. Thank you!

  • Error when installing jam pack/audio content on new imac

    Keep trying to install the audio/jam pack cd´s that came with my Logic Studio bundle on my new Imac/Leopard. When i´m almost done installing, it asks for the "logic" cd and then after a while i´m getting an error "installation failed"- disk corrupted" or something? I cannot as it works now find (almost) any of the audio files that i´m using (brass/horn sounds etc..). Anyone who´s had the same experience?
    Thanks!

    Also seeing this problem. I'm updating to latest logic and 10.5.3 right now to see if it mitigates it.

  • LE 8 doesn't see all of my installed Jam Packs

    Just setting up a new mac. I installed all the Jam Packs. After that I brought up Garageband and when I click on "Loops" it show the following list. I did notice that when Garage Band came up, it indicated that it was searching for Jam Packs...
    Garage Band
    iLife Sound Effects
    Jam Pack Remix Tools
    Jam Pack Rhythm Section
    Jam Pack Symphony Orchestra
    Jam Pack Voices
    Jam Pack World Music
    I then installed Logic Express 8. I launched it and when I click on "Loops", I'm missing 2 of the Jam Packs. I only see:
    Garage Band
    iLife Sound Effects
    Jam Pack Remix Tools
    Jam Pack Voices
    Jam Pack World Music
    Can I drag the missing Jam Packs on to Logic? I don't want to make copies, just want them to be seen there.
    Please advise.
    Thanks

    One more observation. I tried dragging just one file over from the Orchestra folder (Academy Cello 01). I then searched for it and found it. I then searched for "Academy Viola 01", but it didn't find it. I ended up dragging over the set of 5 Academy sounds and now if I search for just "Academy" to all show up in the search results. The only bad thing is I don't actually see the "Symphony Orchestra" pack in the list. I guess I can live with that, but it would be nice to see them all there, just so I know which ones I have. Dumb, I know...
    If you know of any other way, please let me know.
    Thanks again for your help!

  • Installing jam packs from DVD on Lion

    When I got my new iMac last year it came with Snow Leopard. At the time, I attempted to install all my jam packs (I have all of them) and it gave me an error that Rosetta was not installed. After installing it, I was able to install my jam packs, which i use with GarageBand and Logic Express.
    I hear that Lion no longer supports Rosetta. Anyone know how to install the jam packs? Can I copy the jam pack folder to an external drive and then copy them back? Seems like the installation is a "package", which may not work if I don't run it from the install DVDs.
    Thanks

    If you install Mac OS X 10.7.3 Lion on top of your Snow Leopard, then the Jam Packs will will continue to work. If you make a clean install of Lion, then you will have a problem with the installers, for Lion does not support Rosetta. Then the best you can do will be to restore the library folders containing the Apple Loops and the Instruments Library from your (Time Machine) Backup.
        /Library/Audio/Apple Loops
       /Library/Application Support/GarageBand/Apple Loops
       /Library/Application Support/GarageBand/Instrument Library
    For a clean install you might consider to invest into purchasing MainStage 2 - it is much cheaper than any of the Jam Packs ever has been, but will install all the JamPacks to be used with GarageBand and Logic.
    Regards
    Léonie

  • How can I open a picture file in PS Elements after installing service pack 2?

    Since I installed service pack 2 on my HP computer a week or two ago, the Photoshop "Open" tab no longer appears at the top of my Pictures screen, but rather a "Preview" tab, and I haven't been able to open a picture in Photoshop.  Instead, when I double click on a picture, it opens in Windows Picture Gallery.  Not long after I installed service pack 2, I also changed my default browser from Internet Explorer to Mozilla Firefox, so I don't know if that has anything to do with it.  Thanks...

    Reinstall PSE or manualyl adjust your file associations.
    Mylenium

  • Fix for continuous reboot after installing Service Pack 3 in Windows XP

    After contacting HP Technical Support and speaking to a supervisor we were able to solve the problem of Windows continuously rebooting after installing SP3. Here are the steps that fixed the problem with my HP Pavilion running on an AMD processor. The steps are actually fairly straight forward and easy....
    Issue: The computer reboots continuously after installing Windows XP service pack 3
    Computer reboots continuously after installing Windows XP service pack 3 on AMD systems. The problem is that with some configurations, SP3 causes the computer to crash during boot, and Windows XP, by default, is set up to automatically reboot when it crashes. That is why you end up in the endless rebooting scenario.
    Cause:
    On HP computers, the same Windows installation disc image for Intel processor based PC's is deployed for the AMD processor based computers as well. Because the original installation image for both Intel and AMD is the same, all have the intelppm.sys driver installed and running. That driver provides power management on Intel-based computers. On an AMD-based computer, amdk8.sys provides the same functionality for power management.
    Symptoms:
    Ordinarily, having intelppm.sys running on an AMD-based computer appears to cause no problems. However, on the first reboot after a Service Pack 3 installation, it causes a big problem. The computer either fails to boot, or crashes with a STOP error code of 0x0000007e.
    You may not see the error code because the computer reboots too fast. In order to get the error message, you need to set an option during startup. To do so, open the windows advanced menu by tapping the f8 key on startup. Then select the "Disable automatic restart on system failure" option.
    Solution:
    If you have an AMD-based computer, however, you do not need the intelppm.sys driver and can disable it. There are three methods in order to do this.
    Step 1: Please try to log on the system in safe mode.
    1. While using Safe mode open the command prompt....  Start, All Programs, Accessories, Command Prompt
    Run the following command in the command prompt just like it's typed: sc config intelppm start= disabled
    Step 2:
    If the issue persists, please try to log on or boot the system in recovery console (refer to the web document)
    2. Using recovery console:
    If you booted into the recovery console, from a command prompt, type: disable intelppm
    Step 3: Please check in registry.
    3. Using windows registry:
    1. Run regedit
    2. Click on HKEY_LOCAL_MACHINE
    3. From the File menu, select "Load hive"
    4. Navigate to %systemdriver%\Windows\System32\Config on the dead system and select the file name System
    5. Name it something you can remember, such as "horked"
    6. Navigate to horked\ControlSet001\Services\IntelPPM
    7. Double click the Start value and set it to 4
    8. If you did what I did and completely messed things up by running a disk check previously, navigate to ControlSet001\Control\SessionManager. Open the BootExecute value and clear out the autochk entries.
    9. Repeat steps 6-8 for the other control sets.
    10. Reboot
    Reference:
    http://support.microsoft.com/kb/888372
    Additional information:
    Computer Restarts after Displaying Stop Error 0x0000007E (After Updating with Service Pack 3 for Windows XP):
    http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c01457284&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
    For future reference: Service pack 3 Installation steps:
    Before installing the service pack 3 update, please follow the steps listed above and save yourself much time and effort.
    To uninstall service pack 3, I suggest that you uninstall it from add/remove programs.
    Step 1:
    Uninstall service pack 3 from add/remove programs:
    1. Click Start.
    2. Select Run.
    3. Type appwiz.cpl in the run field.
    4. Click OK.
    5. Click change or remove programs.
    6. Select the program -service pack 3 that you want to uninstall or remove.
    7. Click Remove button.
    8. It will pop up the message stating that "Are you sure you want to remove the programs".
    9. Click Yes. It will help you to remove or uninstall the installed programs from add and remove programs.
    Step 2: If the issue persists, I suggest you to perform system restore and then try to install the service pack 3 after performing the steps mentioned above in regards to removing the intelppm.sys Driver.
    Using Microsoft System Restore in Windows Me and XP:
    http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=bph07103&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
    Step 3:
    How to obtain the latest Windows XP service pack :
    http://support.microsoft.com/kb/322389/
    Steps to take before you install Windows XP Service Pack 3:
    http://support.microsoft.com/kb/950717/en-us
    I hope this helps someone who is having this problem. It sure took me a minute to get it all figured out. :0)

    Still useful as of 12/30/11. Have ten Lenovo 5042 computers with downgrade licenses to run XP and have a ghosted image from another Lenovo 5042 having and Intel cpu. My target computers all have AMD cpus in them and the image would continuously reboot on
    the AMD computers.
    Used method 1 and it cleared the problem instantly, many thanks for the post and the time and effort it took to dig up the answer..

  • How can I install Jam Packs on a new Mac Mini?

    I've a lovely new mac mini, but the little bugger has no disk drive.  I migrated several jam packs over from my old mac mini only to get a troubling error message requiring tht I reinstall the jam packs.  Alas, they refuse to be installed from a network drive using CD/DVD drive sharing. What's a homie to do??

    Hi jwmvtiel,
    Please follow the article: CC desktop lists applications as "Up to Date" when not installed to resolve your issue.
    Let us know for further issues.
    Regards,
    Ratandeep Arora

  • Volume Keys not responding after installing service pack 1.

    Okay, I've scoured the internet, and I can't find anyone else with a similar problem or a way to fix it, hopefully ya'll will have an answer:
    I recently just updated my Vista Ultimate Operating System (using Bootcamp) to service pack 1. Prior to installing service pack 1, when I pressed F3-F5 on the keyboard, they would respond in the same manner that they would on OS X where F3 would mute, F4 would make the sound lower, and F5 would increase the sound.
    However, after Service Pack 1, the buttons do nothing more than mute and turn on the sound. I reinstalled the Boot Camp drivers, ran all the software updates (found no updates on both apple and windows), and tried to repair Vista from the original install disk. Nothing helped.
    However, here's the thing: When I press the buttons the same little overlay comes up displaying the sound volume, but there's a big 'denied' circle on the bottom of it. To describe it slightly better, there's a circle with the line through it(looks like a no smoking sign), placed over the squares representing the volume on the overlay to show volume control.
    I'm lost as to what to do since all the other keys work, including the brightness control, and they worked before I installed Service Pack 1. Has anyone else had this problem or know how to fix it?

    i just uninstalled SP1 and it went back to normal,
    go to Control Panel and on the left side theres something called "view installed updates" go there and just uninstall SP1 and your fine. but if you need sp1, i don't know how to help you there.

  • Error after install Service Pack 4

     

    Put weblogic510sp4boot.jar as the first package in your JAVA_CLASSPATH
    and
    Put weblogic510sp4.jar as the first package in your WEBLOGIC_CLASSPATH
    Cheers - Wei
    Min Zheng <[email protected]> wrote in message
    news:[email protected]...
    Hello,
    I have following errors when I start WL:
    java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
    getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:140)
    >
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:112)
    >
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:104)
    >
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
    iveReloadOnModifyClassLoader.java:53)
    >
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
    init>(RecursiveReloadOnModifyClassLoader.java:149)
    >
    at
    weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
    pl.java:1392)
    >
    at
    weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
    516)
    >
    at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
    Compiled Code)
    at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
    getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:140)
    >
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:112)
    >
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
    a:104)
    >
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
    iveReloadOnModifyClassLoader.java:53)
    >
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
    init>(RecursiveReloadOnModifyClassLoader.java:149)
    >
    at
    weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
    pl.java:1392)
    >
    at
    weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
    516)
    >
    at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
    Compiled Code)
    at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    This erros happend only after I installed Service Pack 4, and change the
    weblogic.class.path.
    Thanks,

  • Trouble installing Jam Pack #1 (the original)?

    Also posted in Logic but it also makes sense to post here unless there are rules against cross-posting.
    Recently doing a migration from a PPC to a Mac Pro.
    Anyway, I was trying to reinstall Jam Pack 1 (the original Jam Pack) to use with Logic Pro. I was also planning on using it in Garageband.
    When I tried to install, I kept getting the error "Installation cannot continue until the GarageBand application is installed." But it was installed.
    Did a bit of digging. Found this:
    http://discussions.apple.com/thread.jspa?messageID=1989594&#1989594
    Which led me to examine my directory structure in the Applications Folder. Turns out I had moved Garageband into a subfolder and the installer wasn't able to find it. I just moved it back to its normal spot and the installer was happy.
    I hope this helps someone else.

    also applies to the 1.01 update found here:
    http://www.apple.com/support/downloads/garagebandjampack.html

  • Install jam pack on external drive

    Hi all
    I'm a Logic 8 user, and need to install the jam packs onto an external drive, as my powerbook hard drive is almost full.
    I haven't been able to figure out a way to do it, because, when I put the jam pack contents disk in my drive to install, a dialog box tells me to install the jam packs from the Logic install disk.
    In spite of the fact that the read me file says that I can "freely install" the larger audio files anywhere, the Logic Install disk won't let me do this. It does not give the the option to change disks, even though I have deselected all the install options, except for Jam Pack. It actually seems that the steps you need to take to run the installer are backwards. You have to choose the disk on which to install Logic, and then choose what elements of Logic to install, so I can never choose the external hard drive!
    Does anyone know why this might be. or can someone tell me what I am doing wrong?
    Thanks
    Angus Armstrong

    Seriously? They really make you install everything on the internal and then move it over? Why would this be the case? Doesn't that get a little messy with re-indexing everything. I installed the basic install disc info a while ago, and have been holding off on the jam packs until I get the external, just to avoid a little wear and tear on my internal drive. I guess I might as well install them now? And move them over later?

  • Cannot install jam packs and cannot make disc image..what to do?

    first installation of Logic Studio didn't work and reinstall even worse - can't get past jam pack 1 - even tried a disc image but got error input output.
    Yet the disc was verified.
    Would it help to reinstall OSX again the install?
    Jeez!

    Hi,
    See this Link for Poland...
    Poland
    00800 4411875 (universal free phone)
    www.apple.com/pl/support/
    Contacting Apple World Wide for Support and Service
    http://support.apple.com/kb/HE57

Maybe you are looking for