Keyword list errors
My keywords were part of my import from Elements into LR2. Some where in the process I developed some keyword errors.
I have one keyword that shows 59 photos in the keyword list, a sub category with 5 photos and a sub-sub category with 2 photos. All categories and subs have the same name. When I use the Library filter I can find only 49 photos. When I click on the arrow to the right of any of the keywords 49 photos are shown, not the 59 /5/2 listed.
How can I correct this problem?
This is a long-standing bug in LR on Windows -- the Keyword List pane is limited to showing about 1600 keywords. A workaround is to introduce more hierarchy into your keywords and keep most of the parent keywords collapsed.
You could submit a bug report to the new Adobe feedback site:
http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om
(There may already be a bug report there on this topic, but I couldn't find it. It's perfectly ok, and preferrable, to submit a new one and let Adobe merge it with an existing one if they can find it.)
Similar Messages
-
Keyword List doesn't show the correct images when clicked
I'm using LR 2.3RC on a Windows Vista Ultimate PC, although the same error occurs on LR2.2.
I have a keyword structure "Karl > Family > People" with Karl having 33 images with this keyword. When I use the "Keyword List" on the right panel in the Library module to display these images I get over fourteen thousand images in the grid! This doesn't happen when I use the "Library Filter" bar above the grid.
What gives?Don,
the result of clicking on "Karl" should display 33 images in total. In fact I'm getting 14,589 of a possible total of 14,734 in the catalogue. This hardly a limitation, rather the opposite I would say!
John -
CS4 Bridge short term memory "keyword list"
Greetings ,
I have a Mac G4 2002 with CS4 11.0.1 and I went through all my photos in one three day period and made keywords for the relevant image selections. I love the way it works. ..... BUT ! if I turn off the machine and later come back and open bridge to quick select my photo criteria for editing, my keyword list defaulted to the bridge example list that came with the system. I looked in Preferences and did not find a selection that seemed relevant.
I hope I am just being stupid, missing something simple like "Save As, keyword list under name ....?" The keywords are still associated with the picture files. I can get back all of the keywords by spending a few hours and clicking one by one on every image in storage. The list eventually builds itself up to it previous glory. But shut down and you get to do it all over again.
Thanks for your assistance !Yes, I do shut my computer down the correct way by going to the apple menu first and using the shut down menu function, more anal than that I close the applications that are open first prior to going to the apple menu.
Thank you for the purge cache suggestions.
I did purge once the cache files and it made no change in behavior.
On your suggestion :
A: [ I proceeded by opening some photo folders and clicked on some images so that the list could build up again some ( I only did a few folders ).
Then I closed out of out of the application and the shut down. On booting back the OS and opening the application the list had still shrunk. ]
I then repeated "A" and but on bringing the application back up I used the "Option" key hold down so that I could purge Preference files. Shrunk again!
I tried the "purge cache for folder" option, and then Repeated "A" and the result was the same, shrunken list.
I did learn that I did not need to shut down the computer to loose the keyword list however, it goes away with just the closing of the application option.
I also learned that the list is not completely lost now, it defaults to a shorter list of my own words (at least now it does). That default shrunken list is consistent the last two times on re-starting the application.
I am wondering now if there had been some error made in how a list could be put together. Like did I screw up with hierarchy protocol somehow, or should we restrict our naming to a only a two tier system instead of using a three tier system?
From Bridge the suggestion keywords (ie: Mathew, New York, Paris) don't come up anymore. I don't have those images, but interestingly enough, I don't see those names coming up anymore.
Earlier I did try weeks ago to reload the Photoshop CS4 package onto my computer hoping that would solve this problem. One thing I did not do at that time was use "FIND" to search out where relative preference files might lay and then dump those in the trash prior to re-install. I don't know, maybe I have no option but to try that again but by dumping the preferences prior to install.
Since we did just try the "option key" on start of application, does this fully do the same thing?
Thanks again for your suggestions! -
Strange Keyword List Filtering Behavior
When I filter down for a word and want to see its sub-word and maybe add another one I click on it and reset the filter. And after that I can browse down until white line of selection where I stop and discover what words I have inside selected word and add another one if I need. It worked this way in LR2 but now selection of a word in filtering mode doesn't save when I reset a filter! But selection is not filtering! Why you've made this change???
Update: I just got why Adobe made this change. Because now I don't need to expand word branches to see the end of it with requested word—LR3 temporarily expand the branches when you search for a word. BUT if you select a word of TEMPORARY expanded branch—the selection won't be saved after filter reseting!
So, we can use the following workaround: If you expand all keyword listing down to the end white line selection will be saved after filter reseting.
But the best solution I see here is to give a possibility to see sub-words of filtered word even if they don't have requested word—just make them gray for example (but save a possibility to edit them).
Flickr plug-in and better watermarking (which doesn't work for my demands) are reasons why I wanted to upgrade but this is a second keyword list change which I don't like! You can check for another change in LR3 Keyword List behavior here http://forums.adobe.com/message/2908024#2908024 Because of it I need to have keyword list with all synonyms opened in text editor to search before adding another unnecessary word which I already have in synonyms. If you have CV with big branches and a lot of synonyms—this is a problem. Please fix!
Message was edited by: shootme.ruHI William...
Hopefully just a corrupted preference file.
Locate this file. com.apple.finder.plist
/Users/YourName/Library/Preferences.
Drag that .plist file from the Preferences folder to the Trash, empty the Trash and restart your Mac.
If that doesn't help, boot from the SL disk and check the hard drive for errors.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
Check available disk space.
Control or right click the MacintoshHD icon on your Desktop. Click "Get Info". Under the General tab you will see Capacity and Available. *Make sure there is at least 10% available disk space, 15% is better.*
Carolyn
Message was edited by: Carolyn Samit -
How can I copy keyword list to a new library
I'm a keyword fanatic. Keywords are my most favorite feature of the product. It's the reason I use iPhoto in the first place. I recently created a new iPhoto v6 library and can see that the keyword list did not get migrated. Is there a way to do this? Can I export and import the keyword list? Thanks.
gtigan
Keywords are kept in the main database file and when you create a new library, you create a new database.
The only way I can think of to what you want is to select a single pic and give it ALL the keywords, then use iPhoto Library Manager to move that pic from the old library to the new one. iplm is the only way to move pics and metadata between libraries while using v6. (hmm, another reason to upgrade.)
And, as I mentioned in my other post, if you're a "keyword fanatic" then check out Keyword Manager
Regards
TD -
Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
ThanksStep by step, how did you arrive at seeing this agreement?
-
Export and Import a Keyword List
Yesterday I exported the keyword list and then acted on the suggestion from LightroomSecrets site to 'organize' while it is in text format. This went very well using a text editor.
The IMPORT doesn't overwrite the existing list. It merges INTO the list.
So now I'm still scrolling up and down collecting the keywords that are stand alone to undo and then put a checkmark beside the subkey in a category. I would have been wiser to have reorganized a few and repeated the export,import <grin>
If keywording is promoted as such an important feature and a main item for management in Lightroom then, it would seem to me that the 'LIST' itself could have been designed in a more efficient manner...Such as : a right click menu...or a browse and choice to move to...
I suppose the architects of this list assumed users would have their keywording planned out ahead of time. Never assume <grin> I've only now (V1 to V3.4.1) got my head around the category concept so much reorganization required. Scroll up and down and zoom past the category wanted....not an exercise I can stay with for long periods of time <LOL!>
Rosegtigan
Keywords are kept in the main database file and when you create a new library, you create a new database.
The only way I can think of to what you want is to select a single pic and give it ALL the keywords, then use iPhoto Library Manager to move that pic from the old library to the new one. iplm is the only way to move pics and metadata between libraries while using v6. (hmm, another reason to upgrade.)
And, as I mentioned in my other post, if you're a "keyword fanatic" then check out Keyword Manager
Regards
TD -
Address list error -- 5.7.1 Relaying not allowed
Hi,
We have setup the Java Messaging Server to send/recieve mails from a gateway. The inbound mail flow works perfectly but, the outbound mail flow has issues.
The outbound mails are not hitting the gateway. When checked the log for outbound mail, it displays the address list error - 5.7.1 Relaying not allowed for any domain i.e gmail.com, etc
version:
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:15:31, Oct 12 2007; 32bit)
SunOS P1192FLPLN 5.9 Generic_118558-02 sun4u sparc SUNW,Sun-Fire
here is the log for reference...
=========================================================================
root@P1192FLPLN # /opt/SUNWmsgsr/sbin/imsimta test -rewrite -debug -source_channel=tcp_local [email protected] [email protected]
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
17:09:37.43: Debug output enabled, system P1192FLPLN.extmail.xyz.com, process 3fbf.1, message enqueue routines version V6.3 compiled Oct 12 2007 17:15:38
17:09:37.43: mmc_winit('tcp_local','[email protected]','') called.
17:09:37.43: Address reversal invoked on [email protected], force reverse URL 1, capture 1
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.43: Rewrite: "$*", position 0, hash table -
17:09:37.43: Found: "$A$E$F$U%[email protected]"
17:09:37.43: Rewrite failed, not forward.
17:09:37.43: Rewrite: "$*", position 1, hash table -
17:09:37.43: Failed.
17:09:37.43: Rewrite: "$*", position 0, rewrite database -
17:09:37.43: Failed
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.43: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.43: Found: "$U%[email protected]"
17:09:37.43: New mailbox: "abhishek.sen".
17:09:37.43: New host: "extmail.xyz.com".
17:09:37.43: New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.43: New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.43: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.43: - found on channel l
17:09:37.43: Routelocal flag set; scanning for % and !
17:09:37.43: Checking reverse URL cache for: [email protected]
17:09:37.43: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.48: Resulting URL: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49: mmc_open_url called to open ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
17:09:37.49: URL with quotes stripped: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49: LDAP URL identified
17:09:37.49: URL context #1 will be used
17:09:37.49: Performing URL search on: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.53: mmc_read_url result: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53: URL resolution returned: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53: mmc_read_url result: [preferredlanguage] en
17:09:37.53: URL resolution returned: [preferredlanguage] en
17:09:37.53: Attribute index: 0
17:09:37.53: LDAP URL produced preferred language en
17:09:37.53: mmc_read_url result: [mailmsgmaxblocks] 700
17:09:37.53: URL resolution returned: [mailmsgmaxblocks] 700
17:09:37.53: Attribute index: 0
17:09:37.53: LDAP URL produced blocklimit 700
17:09:37.53: mmc_read_url result: [mail] [email protected]
17:09:37.53: URL resolution returned: [mail] [email protected]
17:09:37.54: Attribute index: 0
17:09:37.54: LDAP URL produced address [email protected]
17:09:37.54: No more results to return
17:09:37.54: Override postmaster: [email protected]
17:09:37.54: Preferred language en
17:09:37.54: Content return block limit now 700
17:09:37.54: Mapped return address: [email protected]
17:09:37.54: from_access mapping check: ||MAIL|tcp_local|[email protected]|
17:09:37.54: Queue area size 73232902, temp area size 2067314
17:09:37.54: 18308225 blocks of effective free queue space available; setting disk limit accordingly.
17:09:37.54: 1033657 blocks of free temporary space available; setting disk limit accordingly.
17:09:37.54: - passed.
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.54: Rewrite: "$*", position 0, hash table -
17:09:37.54: Found: "$A$E$F$U%[email protected]"
17:09:37.54: Rewrite failed, not forward.
17:09:37.54: Rewrite: "$*", position 1, hash table -
17:09:37.54: Failed.
17:09:37.54: Rewrite: "$*", position 0, rewrite database -
17:09:37.54: Failed
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.54: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.54: Found: "$U%[email protected]"
17:09:37.54: New mailbox: "abhishek.sen".
17:09:37.54: New host: "extmail.xyz.com".
17:09:37.54: New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.56: New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.56: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.56: - found on channel l
17:09:37.56: Routelocal flag set; scanning for % and !
*** Debug output from rewriting a forward header address:
17:09:37.56: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.56: Rewrite: "$*", position 0, hash table -
17:09:37.56: Found: "$A$E$F$U%[email protected]"
17:09:37.57: Rewrite failed, not envelope.
17:09:37.57: Rewrite: "$*", position 1, hash table -
17:09:37.57: Failed.
17:09:37.57: Rewrite: "$*", position 0, rewrite database -
17:09:37.57: Failed
17:09:37.57: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.57: Rewrite: "xyz.com", position 0, hash table -
17:09:37.57: Failed.
17:09:37.57: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.59: Failed
17:09:37.59: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.59: Rewrite: "*.com", position 0, hash table -
17:09:37.59: Failed
17:09:37.59: Rewrite: ".com", position 0, hash table -
17:09:37.59: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.59: New mailbox: "bhanu.prasad".
17:09:37.59: New host: "xyz.com".
17:09:37.59: New route: "TCP-DAEMON".
17:09:37.59: New channel system: "TCP-DAEMON".
17:09:37.59: Looking up host "TCP-DAEMON".
17:09:37.60: - found on channel tcp_local
17:09:37.60: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.60: Rewrite: "$*", position 0, hash table -
17:09:37.60: Found: "$A$E$F$U%[email protected]"
17:09:37.60: Rewrite failed, not envelope.
17:09:37.60: Rewrite: "$*", position 1, hash table -
17:09:37.60: Failed.
17:09:37.60: Rewrite: "$*", position 0, rewrite database -
17:09:37.60: Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.61: Rewrite: "xyz.com", position 0, hash table -
17:09:37.61: Failed.
17:09:37.61: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.61: Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.61: Rewrite: "*.com", position 0, hash table -
17:09:37.61: Failed
17:09:37.61: Rewrite: ".com", position 0, hash table -
17:09:37.63: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.63: New mailbox: "bhanu.prasad".
17:09:37.63: New host: "xyz.com".
17:09:37.63: New route: "TCP-DAEMON".
17:09:37.63: New channel system: "TCP-DAEMON".
17:09:37.63: Looking up host "TCP-DAEMON".
17:09:37.63: - found on channel tcp_local
17:09:37.63: Rewrite rules result: [email protected]
17:09:37.63: Checking reverse URL cache for: [email protected]
17:09:37.63: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.65: URL generation failed, status = 0
*** Debug output from rewriting a forward envelope address:
17:09:37.65: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.65: Rewrite: "$*", position 0, hash table -
17:09:37.65: Found: "$A$E$F$U%[email protected]"
17:09:37.65: Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.65: old state = not checked.
17:09:37.65: Domain check on xyz.com.
17:09:37.66: Could not add domain result 0 to cache for xyz.com.
17:09:37.66: new state = fail pending.
17:09:37.66: Rewrite failed due to prechannel mismatch.
17:09:37.66: Rewrite: "$*", position 1, hash table -
17:09:37.66: Failed.
17:09:37.66: Rewrite: "$*", position 0, rewrite database -
17:09:37.66: Failed
17:09:37.66: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.66: Rewrite: "xyz.com", position 0, hash table -
17:09:37.66: Failed.
17:09:37.67: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.67: Failed
17:09:37.67: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.67: Rewrite: "*.com", position 0, hash table -
17:09:37.67: Failed
17:09:37.67: Rewrite: ".com", position 0, hash table -
17:09:37.67: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.67: New mailbox: "bhanu.prasad".
17:09:37.67: New host: "xyz.com".
17:09:37.67: New route: "TCP-DAEMON".
17:09:37.69: New channel system: "TCP-DAEMON".
17:09:37.69: Looking up host "TCP-DAEMON".
17:09:37.69: - found on channel tcp_local
address channel = tcp_local
forward channel = tcp_local
channel description =
channel caption =
channel user filter =
dest channel filter =
source channel filter =
channel flags #0 = BIDIRECTIONAL SINGLE_SYSTEM IMMNONURGENT NOSERVICEALL channel flags #1 = SMTP_CRLF MX IDENTNONENUMERIC DEFAULT
channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3 = LOGGING NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4 = EIGHTNEGOTIATE HEADERKEEPORDER NOHEADERREAD RULES
channel flags #5 = TRUNCATESMTPLONGLINES
channel flags #6 = LOCALUSER REPORTNOTARY
channel flags #7 = SWITCHCHANNEL REMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALNONE NOTURN
defaulthost = extmail.xyz.com extmail.xyz.com
linelength = 998
addrsperfile = 99
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = tcp-daemon
channel queue 0 name = SMTP_POOL
channel queue 1 name = SMTP_POOL
channel queue 2 name = SMTP_POOL
channel queue 3 name = SMTP_POOL
channel after params =
channel daemon name = 10.8.51.126
channel user name =
urgentnotices = 1 2 4 7
normalnotices = 1 2 4 7
nonurgentnotices = 1 2 4 7
channel rightslist ids =
local behavior flags = %x0
expandchannel =
notificationchannel =
dispositionchannel =
tlsswitchchannel =
backward channel = tcp_local
unique identifier = [email protected]
header forward address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
header reverse address = [email protected]
envelope forw address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
envelope rev address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
name =
mbox = bhanu.prasad
Extracted address action list:
[email protected]
Extracted 733 address action list:
[email protected]
Address list expansion:
*** Debug output from alias expansion:
17:09:37.76: Inner expand, level = 0, mailbox = [email protected]
17:09:37.76: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.76: Rewrite: "$*", position 0, hash table -
17:09:37.76: Found: "$A$E$F$U%[email protected]"
17:09:37.76: Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.76: old state = not checked.
17:09:37.76: Domain check on xyz.com.
17:09:37.77: Could not add domain result 0 to cache for xyz.com.
17:09:37.77: new state = fail pending.
17:09:37.77: Rewrite failed due to prechannel mismatch.
17:09:37.77: Rewrite: "$*", position 1, hash table -
17:09:37.77: Failed.
17:09:37.77: Rewrite: "$*", position 0, rewrite database -
17:09:37.77: Failed
17:09:37.77: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.77: Rewrite: "xyz.com", position 0, hash table -
17:09:37.77: Failed.
17:09:37.79: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.79: Failed
17:09:37.79: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.79: Rewrite: "*.com", position 0, hash table -
17:09:37.79: Failed
17:09:37.79: Rewrite: ".com", position 0, hash table -
17:09:37.79: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.79: New mailbox: "bhanu.prasad".
17:09:37.79: New host: "xyz.com".
17:09:37.79: New route: "TCP-DAEMON".
17:09:37.80: New channel system: "TCP-DAEMON".
17:09:37.80: Looking up host "TCP-DAEMON".
17:09:37.80: - found on channel tcp_local
-13 expansion total.
*** Debug output from submitting an envelope address:
17:09:37.80: mmc_wadr(0x0017ae68,'[email protected]','[email protected]') called.
17:09:37.80: Copy estimate before address addition is 1
17:09:37.80: Parsing address [email protected]
17:09:37.80: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.80: Rewrite: "$*", position 0, hash table -
17:09:37.81: Found: "$A$E$F$U%[email protected]"
17:09:37.81: Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.81: old state = not checked.
17:09:37.81: Domain check on xyz.com.
17:09:37.81: Could not add domain result 0 to cache for xyz.com.
17:09:37.81: new state = fail pending.
17:09:37.81: Rewrite failed due to prechannel mismatch.
17:09:37.81: Rewrite: "$*", position 1, hash table -
17:09:37.83: Failed.
17:09:37.83: Rewrite: "$*", position 0, rewrite database -
17:09:37.83: Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
xyz.com", literal = "", tag = ""
17:09:37.83: Rewrite: "xyz.com", position 0, hash table -
17:09:37.83: Failed.
17:09:37.83: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.83: Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
.com", literal = "", tag = ""
17:09:37.83: Rewrite: "*.com", position 0, hash table -
17:09:37.84: Failed
17:09:37.84: Rewrite: ".com", position 0, hash table -
17:09:37.84: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.84: New mailbox: "bhanu.prasad".
17:09:37.84: New host: "xyz.com".
17:09:37.84: New route: "TCP-DAEMON".
17:09:37.84: New channel system: "TCP-DAEMON".
17:09:37.84: Looking up host "TCP-DAEMON".
17:09:37.84: - found on channel tcp_local
17:09:37.84: - adding address [email protected] to headers.
17:09:37.86: - orig_send_access mapping check: tcp_local|abhishek.sen@extm
ail.xyz.com|tcp_local|[email protected]
17:09:38.16: - failed.
17:09:38.16: Good address count 0 defer count 0
17:09:38.16: Copy estimate after address addition is 1
17:09:38.16: mmc_waend(0x0017ae68) called.
17:09:38.16: Copy estimate is 1
17:09:38.16: Queue area size 73232902, temp area size 2067288
17:09:38.16: 36616451 blocks of effective free queue space available; setting
disk limit accordingly.
17:09:38.16: 1033644 blocks of free temporary space available; setting disk li
mit accordingly.
Expanded address:
[email protected]
Submitted address list:
Address list error -- 5.7.1 Relaying not allowed: [email protected]
Submitted notifications list:
=========================================================================Do we have to make any changes on other config files except the imta.cnf and mappings file for inbound and outbound..
thanks for any help
Edited by: prasad0_0 on Jul 8, 2008 4:58 AMi have already setup the messaging server 6 months back.. followed the same procedure to route mails to a gateway..
made changes to the imta.cnf for outbound mail flow to the tcp_local and mappings file to accept inbound mail flow from the gateway. Its working perfectly on the older setup, but this now, have issues with new setup.
here is the imta.cnf file..
! IMTA configuration file
! part I : rewrite rules
! Domain Rewrite Rules.
! Uncomment this line to use domain rewrite rules
! from the configuration file instead of the domain database.
! Please refer to the iMS documentation for details.
!<IMTA_TABLE:domains.rules
! Rules to select local users
$* $A$E$F$U%[email protected]
P1192FLPLN.extmail.xyz.com $U%[email protected]
extmail.xyz.com $U%[email protected]
! ims-ms
.ims-ms-daemon $U%$H.ims-ms-daemon@ims-ms-daemon
! lmtp
!.lmtp $U%$H@lmtpcs-daemon
! lmtpn
!.lmtpn $U%$H@lmtpcn-daemon
! native
.native-daemon $U%$H.native-daemon@native-daemon
! pipe
.pipe-daemon $U%$H.pipe-daemon@pipe-daemon
! tcp_local
! Rules for top level internet domains
<IMTA_TABLE:internet.rules
! tcp_intranet
! Do mapping lookup for internal IP addresses
[] $E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon
.extmail.xyz.com $U%$H.extmail.xyz.com@tcp_intranet-daemon
* $U%$&0.extmail.xyz.com
! reprocess
reprocess $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
reprocess.P1192FLPLN.extmail.xyz.com $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
! process
process $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
process.P1192FLPLN.extmail.xyz.com $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
! defragment
defragment $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
defragment.P1192FLPLN.extmail.xyz.com $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
! conversion
conversion $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
conversion.P1192FLPLN.extmail.xyz.com $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
! bitbucket
bitbucket $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
bitbucket.P1192FLPLN.extmail.xyz.com $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
! deleted
deleted-daemon $U%$H@deleted-daemon
.deleted-daemon $U%$H@deleted-daemon
! inactive
inactive-daemon $U%$H@inactive-daemon
.inactive-daemon $U%$H@inactive-daemon
! hold
hold-daemon $U%$H@hold-daemon
.hold-daemon $U%$H@hold-daemon
! part II : channel blocks
defaults notices 1 2 4 7 copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 logging defaulthost extmail.xyz.com extmail.xyz.com
! delivery channel to local /var/mail store
l subdirs 20 viaaliasrequired maxjobs 7
P1192FLPLN.extmail.xyz.com
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D
ims-ms-daemon
! native
native defragment subdirs 20 maxjobs 1
native-daemon
! pipe
pipe single defragment subdirs 20
pipe-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 loopcheck daemon 10.8.51.126
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipientpolicy 4
tcp_intranet-daemon
! tcp_submit
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipientpolicy 4
tcp_submit-daemon
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4
tcp_auth-daemon
! tcp_tas
tcp_tas smtp mx single_sys allowswitchchannel mustsaslserver maytlsserver deliveryflags 2
tcp_tas-daemon
! tcp_lmtpss (LMTP server - store)
!tcp_lmtpss lmtp flagtransfer
!tcp_lmtpss-daemon
! tcp_lmtpcs (LMTP client - store)
!tcp_lmtpcs defragment lmtp port 225 nomx single_sys subdirs 20 maxjobs 7 pool SMTP_POOL dequeue_removeroute
!lmtpcs-daemon
! reprocess
reprocess
reprocess-daemon
! process
process
process-daemon
! defragment
defragment
defragment-daemon
! conversion
conversion
conversion-daemon
! bitbucket
bitbucket
bitbucket-daemon
! deleted
deleted
deleted-daemon
! inactive
inactive
inactive-daemon
! hold
hold
hold-daemonand mappings file..
! MTA mappings file
! for access control and other table lookups
FROM_ACCESS
! Entries to block certain submissions normally would be inserted here,
! above the ntended-to-be-final entries that while permitting submission,
! merely disable any potential "vacation" effect.
! The following entries disable Sieve "vacation" action on lists sorts
! of addresses, as recommended by the Sieve "vacation" extension draft.
*|SMTP*|*|*|MAILER-DAEMON@*|* $!$Y
*|SMTP*|*|*|LISTSERVE*@|* $!$Y
*|SMTP*|*|*|majordomo@*|* $!$Y
*|SMTP*|*|*|*-request@*|* $!$Y
*|SMTP*|*|*|*-owner@*|* $!$Y
*|SMTP*|*|*|owner-*@*|* $!$Y
PORT_ACCESS
*|*|*|*|* $C$|INTERNAL_IP;$3|$Y$E
* $YEXTERNAL
INTERNAL_IP
$(10.8.55.49/24) $Y
$(10.8.51.125) $Y
$(10.8.51.126) $Y
127.0.0.1 $Y
* $N
ORIG_SEND_ACCESS
tcp_local|*|tcp_local|* $N$D30|Relaying$ not$ allowed
tcp_*|*|native|* $N
tcp_*|*|hold|* $N
tcp_*|*|pipe|* $N
tcp_*|*|ims-ms|* $N
! Block "external" submissions of explicitly source-routed "internal" addresses
tcp_local|*|tcp_intranet|@*:*.* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*$%*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*.*!*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|"*@*"@* $N$D30|Explicit$ routing$ not$ allowed
SEND_ACCESS
tcp_*|*|*|*@[127.*] $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@localhost.* $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.com $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.net $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.org $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.test $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.example $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.invalid $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.localhost $X5.1.2|$NBad$ destination$ system
<IMTA_TABLE:mappings.localewe are able to receive mails from the gateway, but when using uwc to send the mail, the mail doesnt hit the gateway. trying a telnet from the messaging server to the gateway, works perfectly.
thanks in advance. -
How do I migrate my exhaustive keyword list from my previous version of PS, CS5 to CS6?
I upgraded to PS CS6 and failed to export the exhaustive keyword list I had created by adding personal keywords to the "Controlled Vocabulary Keyword Catalog" I was using in CS5. I thought I'd be able to open my previous version of CS5 to export that catalog, but every attempt to open PS CS5 or the Bridge CS5 defaults to CS6.
I would love to go back and open my previous version to export that catalog rather than trying to recreate it from a new Controlled Vocabulary Keyword Catalog download.
Thank you in advance for any help you may provide.Thank you for your help, but I found a file called Adobe Bridge Keywords.xml that only contained the default keywords that are contained in the startup version of PS. I didn't find the exhaustive list that I created in CS5 Bridge. Is there another place that I could find that entire list including the heirarchy?
Or is there a way to open the old version of Adobe PS Bridge CS5?
Thanks Curt Y -
Should I Avoid LR4 and Get LR3 Because of My Huge Hierarchical Keyword List?
I abandoned LR2 several years ago because it crashed from my hierarchical list of 12,000 keywords. (Botanical and common names and other terms.) I have been using CS5/Camera Raw/Bridge to manage and edit my images. The hierarchical list is necessary for my stock photo business.
I will soon be needing to compare and edit images for a book publication and gallery show and I am thinking I may need to return to LR so I can work more effciently. I do not care about not exporting some keywords or synonyms etc. I think (right now anyway) that it is fine that all keywords associated with the images get exported for my stock submissions. I ususally check off only the sub-keywords or sub-sub-sub keywords.
Here are my questions:
1) Is LR 3 able to handle my huge list of hierarchical keywords which is now larger than 12,000 words?
2) Should I upgrade to LR3 and not to LR4 to avoid the keyword mess I have been reading about but don't understand very well?
3) Is it possible to even upgrade to LR3 now that LR4 is released?
3) Would LR4 handle my keywords better or worse than LR2? Than LR3?
4) Is there a work efficiency reason to upgrade to CS6 without using any version of LR and continue using Bridge and Camera Raw as I have been?
5) Is there anything else I have not thought to ask? I am somewhat technically challenged and dread learning new software, having been burned in the past with ExpressionsMedia disaster and LR2 which crashed etc.
Thanks for any and all input from the forum!I try to answer your questions. I also have a large list of hierarchical keywords (funny ... also botanical names) but not as much as you have.
1) I think that Lr3 is able to handle your list of keywords. I have not heard from anybody that there is a limit to the number of keywords that Lr is able to handle.
2) There seem to be some keyword issues in Lr4. My keywords were perfectly fine in Lr3 but after upgrading to Lr4 some of my keywords were not populated, meaning that the keywords themselves were listed in the keyword list but the image count showed 0. I still have my Lr3 catalog so was able to check (with Lr3) that, indeed, in Lr3 all the keywords in question were populated with the correct number of images. Fortunately there were not too many of these not-populated keywords, so I corrected the issue manually.
Since correct keywords are mandatory for your stock business, you are right in hesitating to upgrade to Lr4. In my opinion, the improvements that Lr4 offers over Lr3 are mainly in areas that are - probably - not so important to a stock business: improvements in the Develop Module and new Process Version, the Book Module, the map Module. On the other hand I would think that image management is paramount for you and in this area Lr4 is not much different than Lr3.
3) You will not be able to get an upgrade to Lr3 from Adobe now that Lr4 has been released. So you had to find a 3rd party vendor (B&H? Amazon?) who still sells Lr3.
4) Apart from the issue described above, I don't see any difference in keyword handling between Lr3 and Lr4. Lr2 is too far back for me - I don't remember.
5) My suggestion for you would be: You have to upgrade at some point. The longer you wait, the more difficult the transition will be because the differences of future versions to Lr2 will become greater. Since at the moment version 4.1 is in the works (there have been two RCs (Release candidates) of version 4.1 already), maybe it would be wise to wait until the final 4.1 version is out. maybe the keyword issues have been fixed.
6) You can "upgrade" to Lr4 and still have Lr2 on your system. All the Lr versions are stand-alone versions, not "plug-ins" for the previous versions. So you can have two (or more) different Lr versions on your system. So I would suggest that you upgrade to Lr 4.1 (once this version is out) but leave Lr2 on your system. When you Lr4 you will be asked if you want to upgrade your Lr catalog to Lr4 and you have the option of saving the Lr4 catalog as a different file, so that your Lr2 catalog is still available for Lr2 (Lr2 will not be able to work with the Lr4 catalog!). That way, if anything is amiss in Lr4 you can go back to Lr2 and work from there. -
Bug with Lightroom 4? - Big problem in the keyword list!!
Hello guys,
I am Rafael Rojas, a nature and landscape photographer. This is my first post, trigered by a quite bothering problem I am having with my LR...So hello everybody!
I upgraded to LR 4 a week ago. Today I realized many of the keywords I have installed in Lightroom do not appear on the keyword list (basically all keywords after the letter S). Moreover, half of the keywords which appear on the list are not editable: that is, I cannot assign them to the selected image (by clicking on the left box), or I cannot double click them or right click them to get the Edit panel. All the rest of keywords (those which appear on the list on top), can be edited and there is no problem.
When I export the keywords as a .txt file (in metadata, export keywords) I can see that all the keywords are there. When I try to write some of them on the box LR recognize them and adds them automatically. However, I just cannot see them on my keyword list or just cannot edit them.
The reason I want to edit the keywords is because many of them got desactivated while upgrading (something more people have reported). Right now, I cannot send my images to my stock galleries, since many of my important keywords are not active, and I just cannot edit them...
Can you help me please?
thanks so much!!
rafaelWell, 64 bits.
And yes, it seems when I erase one keyword, the list "shows" one more below...so it seems the problem is related to a certain limit in number.
That would be still a problem I could live with, the big problem tough is that many of the keywords got "deactivated" alone by Lightroom (see problem here described http://www.backyardsilver.com/2012/02/strange-behavior-with-capitalized-keywords/) and that means I NEED to edit some keywords which are really important and which are not active. Otherwise, when I export the images those keywords are not embedded...
Any thoughts?
Rafa -
I can't import keyword list into Aperture
I want to import a big keyword list from last years photo library into this years, but when I export the keyword list from my 2012 library it's greyed out and won't import into my 2013 library. The Aperture help says it should work just fine, any tips on what I / Aperture / Apple are doing wrong here greatly appreciated: I have a big family keyword list which I don't want to have to recreate from scratch!
Thanks all, JamesYou are welcome, James! Thanks for the virtual flowers and chocolate!
Very pretty!
Léonie -
Use a keywords list as a source for an autocomplete list?
Is this possible? I have a large keyword list that has been developed over a long period of time. I want to be able to autocomplete when I start typing, based on the keywords list. The list has become very difficult to quickly navigate in the keyword panel. Thoughts?
Crop the image out of the print screen. I imagine your screen will be a much larger resolution then the camer, and will only take up a portion of your browser window.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously. -
In the process of reformatting my macbook pro, I saved everything but my keyword list. The keywords are with the images, but the total list I use under "Keywords" is not present. Is there a way to re-create all my keywords I've used over the last 6 years.
I accomplished what I needed last night. I remembered I had picked my favorite images from each year and put them in a "favorite" folder by year. These folders included 500 to 1200 images per year. I pulled up the folder for each year and highlighted all images and clicked on "Keywords" and all keywords used for all images were listed. I made those keywords persistent. It took me a while to realize I had to click on each keyword to make it persistent. After doing this for all years, I assume 95% of all keywords I have used over the many years were back in my list. I'm sure there is probably a more "technical" way to accomplish what I needed, but this seems to have worked. I also exported my list into a word document and is saved on my hard drive.
If I had not made folders with my favorite images for each year, I could not have used this method, so if you figure out a better way, I like to hear it. Thanks for your comments and willingness to help. -
In Keyword List panel, need to support quotes for AND'ing multi-word keyword searches
As far as I know (and read around), there's no way to search multi-word keywords in the keywords list panel using the "Filter Keywords" box. i.e. If I want to search for the "Great Blue Heron" keyword in a large animal keywords list I have, Lightroom will OR the three words instead of AND'ing them like Aperture does more intuitively. Adding quotes like "Great Blue Heron" doesn't work either. Again this is to filter a large keyword lists through the "Filter Keywords" box in the Keywords List panel.
Am I missing something? Is it possible to AND multi-word keywords?
Thanks.Rob,
as far as I know spaces are also contained and allowed in controlled vocabularies (e.g. for the "official" names of animals 'little panda' for example and plants). I'm using spaces for names very often. As a prof. photographer I need to write captions for all of my images before sending them to my agency with WHEN/WHAT/WHERE/WHO etc. So when shooting persons very often or regular (e.g. politicians or athletes) I started years ago to create keywords and hierarchies for them. So it is much easier and more comfortable to assign them later.
Please check out PhotoMechanic or IMatch. These progs doesn't have any problems with spaces in keywords and keyword searches...
BTW: when using a space in a search I expect that the default behaviour of such a space is a locical AND.
Lars
Maybe you are looking for
-
How do I get iPhoto to recognize a scanned jpeg?
I am trying to scan old photographs from books, and put them into iPhoto. Eventually all the photos will be used in an iMovie project. I am having trouble getting iPhoto to recognize the format of the scanned picture. When I try to import the jpeg f
-
How to get the list of registered phones from RTMT
I need to get the list of the registered phones from RTMT in excel sheet or text file how i can do this ?????
-
Exception JComboox :Exception in thread "AWT-EventQueue-0" java.lang.NullPo
Hi, I mapped a vector object to the JComboBox. I'm using the observer pattern to update the ComboBox box whenever there is an message receives.If an update is received I just add the data to the vector and to refresh the ComboBox bu calling the Updat
-
Problem in UpdateStats(update database statistics)
Hello Experts, I am getting this problem while running job UpdateStats, job failed with this error in Job Log: BR0301E SQL error -20000 at location stats_ind_collect-3, SQL statement: 'BEGIN DBMS_STATS.GATHER_INDEX_STATS (OWNNAME => '"SAPSR10"', INDN
-
I am having problem with iMessage after updating my 5s to iOS 8.0.2
I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through