Keyword list system standardizing

Keyword list system in Adobe Bridge CC is different from Lightroom. Lightroom has Synonyms options. When photos export from Lr, Bright will put synonyms keywords into "Other Keywords" list. It will make the Bridge keyword list a mess.
For example. In lightroom, I put "Reach Stacker" at top, "Reachstacker" and "RS" at Synonyms. The Bridge does not recognize the Lr keyword list system. It put them into "Other Keywords" list. Organizing keyword list become difficult.
what I suggest is adobe keyword list system need a standard.

Adobe metadata and keyword searches needs to be fix in a lot of ways. I'm also having trouble searching for keywords throughout a whole drive and not just in one folder.
But as a quick fix you can always make new Keyword list "pull downs" and drag keywords into pull downs to create the same type of filing structure. Once you set it up you shouldn't have to do it again.
Hope that helps!

Similar Messages

Should I Avoid LR4 and Get LR3 Because of My Huge Hierarchical Keyword List?

I abandoned LR2 several years ago because it crashed from my hierarchical list of 12,000 keywords. (Botanical and common names and other terms.) I have been using CS5/Camera Raw/Bridge to manage and edit my images. The hierarchical list is necessary for my stock photo business.
I will soon be needing to compare and edit images for a book publication and gallery show and I am thinking I may need to return to LR so I can work more effciently. I do not care about not exporting some keywords or synonyms etc. I think (right now anyway) that it is fine that all keywords associated with the images get exported for my stock submissions. I ususally check off only the sub-keywords or sub-sub-sub keywords.
Here are my questions:
1) Is LR 3 able to handle my huge list of hierarchical keywords which is now larger than 12,000 words?
2) Should I upgrade to LR3 and not to LR4 to avoid the keyword mess I have been reading about but don't understand very well?
3) Is it possible to even upgrade to LR3 now that LR4 is released?
3) Would LR4 handle my keywords better or worse than LR2? Than LR3?
4) Is there a work efficiency reason to upgrade to CS6 without using any version of LR and continue using Bridge and Camera Raw as I have been?
5) Is there anything else I have not thought to ask? I am somewhat technically challenged and dread learning new software, having been burned in the past with ExpressionsMedia disaster and LR2 which crashed etc.
Thanks for any and all input from the forum!

I try to answer your questions. I also have a large list of hierarchical keywords (funny ... also botanical names) but not as much as you have.
1) I think that Lr3 is able to handle your list of keywords. I have not heard from anybody that there is a limit to the number of keywords that Lr is able to handle.
2) There seem to be some keyword issues in Lr4. My keywords were perfectly fine in Lr3 but after upgrading to Lr4 some of my keywords were not populated, meaning that the keywords themselves were listed in the keyword list but the image count showed 0. I still have my Lr3 catalog so was able to check (with Lr3) that, indeed, in Lr3 all the keywords in question were populated with the correct number of images. Fortunately there were not too many of these not-populated keywords, so I corrected the issue manually.
Since correct keywords are mandatory for your stock business, you are right in hesitating to upgrade to Lr4. In my opinion, the improvements that Lr4 offers over Lr3 are mainly in areas that are - probably - not so important to a stock business: improvements in the Develop Module and new Process Version, the Book Module, the map Module. On the other hand I would think that image management is paramount for you and in this area Lr4 is not much different than Lr3.
3) You will not be able to get an upgrade to Lr3 from Adobe now that Lr4 has been released. So you had to find a 3rd party vendor (B&H? Amazon?) who still sells Lr3.
4) Apart from the issue described above, I don't see any difference in keyword handling between Lr3 and Lr4. Lr2 is too far back for me - I don't remember.
5) My suggestion for you would be: You have to upgrade at some point. The longer you wait, the more difficult the transition will be because the differences of future versions to Lr2 will become greater. Since at the moment version 4.1 is in the works (there have been two RCs (Release candidates) of version 4.1 already), maybe it would be wise to wait until the final 4.1 version is out. maybe the keyword issues have been fixed.
6) You can "upgrade" to Lr4 and still have Lr2 on your system. All the Lr versions are stand-alone versions, not "plug-ins" for the previous versions. So you can have two (or more) different Lr versions on your system. So I would suggest that you upgrade to Lr 4.1 (once this version is out) but leave Lr2 on your system. When you Lr4 you will be asked if you want to upgrade your Lr catalog to Lr4 and you have the option of saving the Lr4 catalog as a different file, so that your Lr2 catalog is still available for Lr2 (Lr2 will not be able to work with the Lr4 catalog!). That way, if anything is amiss in Lr4 you can go back to Lr2 and work from there.

List of standard workflow in oracle HRMS 11i - used in SSHR

Hi everybody,
I want to know all the list of standard workflow and their description, defined in oracle HRMS and used in SSHR.
Is there anyway to know that ??
Please can you give me an answer ASAP.

i explain my need :
i want to have the list of standard workflow processes defined for functions in HRSS.
So i want to know if they are saved in a system table, if it is the case, which program i must execute to have the result..
i read in this manual "Oracle Self-Service Human Resouces Deploy Self-Service Capability Guide" Chapter 4 that :
" SSHR uses workflow processes to combine related functions into a single transaction (for example, to add Special Information Types to Change Assignment or to Personal Information). and to control the transaction flow between the initiating user and other users such as a manager, an HR professional, or an applicant.
You use the Workflow Builder to look at the delivered processes which have been designed to support typical business processes."
i want to know which business processes are supported by SSHR.
thank you very much for your help
Edited by: user638405 on 27 oct. 2010 13:46

List of standard SAP Reports with their description

I nned to have a list of standard SAP reports along with their description. Is there a way to retrieve this by a T-Code?
Please help asap.

Run the T-code
System -> Status -> Program
TSTC table (SE16) has the complete list of all t-codes that exists in your system and their program name.
Table TSTCT will give you the description of the t-code.
Cheers.
Ashish

List of Standard QM reports with Graphical Representation

Dear Users
Does any one have the list of Standard Quality Module Reports which have Graphical Representations also.
Regards
SAM

Use T.codes QM10 To QM15 transaction codes.
If you want to know more about QM reports
Goto SAP easy access-->Information Systems -->Logistics -->Quality management
here you will get list of standard reports
Edited by: Sridhar Jayavarapu on Apr 2, 2009 8:42 AM

CS4 Bridge short term memory "keyword list"

Greetings ,
I have a Mac G4 2002 with CS4 11.0.1 and I went through all my photos in one three day period and made keywords for the relevant image selections. I love the way it works. ..... BUT ! if I turn off the machine and later come back and open bridge to quick select my photo criteria for editing, my keyword list defaulted to the bridge example list that came with the system. I looked in Preferences and did not find a selection that seemed relevant.
I hope I am just being stupid, missing something simple like "Save As, keyword list under name ....?" The keywords are still associated with the picture files. I can get back all of the keywords by spending a few hours and clicking one by one on every image in storage. The list eventually builds itself up to it previous glory. But shut down and you get to do it all over again.
Thanks for your assistance !

Yes, I do shut my computer down the correct way by going to the apple menu first and using the shut down menu function, more anal than that I close the applications that are open first prior to going to the apple menu.
Thank you for the purge cache suggestions.
I did purge once the cache files and it made no change in behavior.
On your suggestion :
A: [ I proceeded by opening some photo folders and clicked on some images so that the list could build up again some ( I only did a few folders ).
Then I closed out of out of the application and the shut down. On booting back the OS and opening the application the list had still shrunk. ]
I then repeated "A" and but on bringing the application back up I used the "Option" key hold down so that I could purge Preference files. Shrunk again!
I tried the "purge cache for folder" option, and then Repeated "A" and the result was the same, shrunken list.
I did learn that I did not need to shut down the computer to loose the keyword list however, it goes away with just the closing of the application option.
I also learned that the list is not completely lost now, it defaults to a shorter list of my own words (at least now it does). That default shrunken list is consistent the last two times on re-starting the application.
I am wondering now if there had been some error made in how a list could be put together. Like did I screw up with hierarchy protocol somehow, or should we restrict our naming to a only a two tier system instead of using a three tier system?
From Bridge the suggestion keywords (ie: Mathew, New York, Paris) don't come up anymore. I don't have those images, but interestingly enough, I don't see those names coming up anymore.
Earlier I did try weeks ago to reload the Photoshop CS4 package onto my computer hoping that would solve this problem. One thing I did not do at that time was use "FIND" to search out where relative preference files might lay and then dump those in the trash prior to re-install. I don't know, maybe I have no option but to try that again but by dumping the preferences prior to install.
Since we did just try the "option key" on start of application, does this fully do the same thing?
Thanks again for your suggestions!

InfoCube not in the system standard InfoArea

Hello:
I face the problem as follow:
I activited the system standard InfoCube,ODS, InfoObject, but I find them no in the sysytem standard InfoArea. Now they stand in the unassigned InfoArea. How can I change the unususlly thing? Hope anyone can give me some advice.
Regards&Thanks!
zagory

Hi,
If you want to list the cube under your company created or any other infoarea, select the cube/ ODS and drang it into the necessary info area.
If it prompts for Tranport request, create one.
hope this helps.
Praveen.

Transaction Code to list all standard function modules available in SAP

Is there any transaction code to list all standard function modules with their
grouping.......like in transaction BAPI all bapis are listed w.r.t. their
functionalities....

Then Try SE84 -> Program Library -> Function modules. Execute to list all FMs.
By the way may we ask the purpose for it, as my ECC 6.0 system has exactly 3,78,979 FM's.
Otherwise if this is an interview question, press the abuse button ( a small yellow traingle at the right of your message subject line ), and in the coming page enter "Interview question" and press Report Abuse.
Hope i have cleared your query.
Regards
Karthik D

List of Standard Reports in Purchasing and Inventory

Pls send me list of Standard reports for Purchasing and inventory.
Thanks-Manju

This is duplicate thread (NO POINTS required)
Hello Manjula,
Go to transaction code SAP1, this will show all the reports functional area-wise.
For purchasing reports : Go to Material management --> Purchasing
For Inventory management reports : Go to Material management --> Inventory management
Hope this helps
Regards
Arif Mansuri

How can I copy keyword list to a new library

I'm a keyword fanatic. Keywords are my most favorite feature of the product. It's the reason I use iPhoto in the first place. I recently created a new iPhoto v6 library and can see that the keyword list did not get migrated. Is there a way to do this? Can I export and import the keyword list? Thanks.

gtigan
Keywords are kept in the main database file and when you create a new library, you create a new database.
The only way I can think of to what you want is to select a single pic and give it ALL the keywords, then use iPhoto Library Manager to move that pic from the old library to the new one. iplm is the only way to move pics and metadata between libraries while using v6. (hmm, another reason to upgrade.)
And, as I mentioned in my other post, if you're a "keyword fanatic" then check out Keyword Manager
Regards
TD

Export and Import a Keyword List

Yesterday I exported the keyword list and then acted on the suggestion from LightroomSecrets site to 'organize' while it is in text format. This went very well using a text editor.
The IMPORT doesn't overwrite the existing list. It merges INTO the list.
So now I'm still scrolling up and down collecting the keywords that are stand alone to undo and then put a checkmark beside the subkey in a category. I would have been wiser to have reorganized a few and repeated the export,import <grin>
If keywording is promoted as such an important feature and a main item for management in Lightroom then, it would seem to me that the 'LIST' itself could have been designed in a more efficient manner...Such as : a right click menu...or a browse and choice to move to...
I suppose the architects of this list assumed users would have their keywording planned out ahead of time. Never assume <grin> I've only now (V1 to V3.4.1) got my head around the category concept so much reorganization required. Scroll up and down and zoom past the category wanted....not an exercise I can stay with for long periods of time <LOL!>
Rose

gtigan
Keywords are kept in the main database file and when you create a new library, you create a new database.
The only way I can think of to what you want is to select a single pic and give it ALL the keywords, then use iPhoto Library Manager to move that pic from the old library to the new one. iplm is the only way to move pics and metadata between libraries while using v6. (hmm, another reason to upgrade.)
And, as I mentioned in my other post, if you're a "keyword fanatic" then check out Keyword Manager
Regards
TD

Unable to retrieve the list of Standard Reports

Hi,
User needs an aging report in PW90 paper but gets an error message when clicking on to the report tab once logged into SAP portal.
Error message:
Unable to retrieve the list of Standard Reports. Please call the Help Desk to report the problem. Error encountered while connecting to R/3. java.lang.NullPointerException.
I checked the java support in Internet explorer and deleted the cookies and temporary files but he kept having the same issue.
Please Help on this !!
Thanks in advance.

Hi,
Try to restart the portal server.
Regards,

How do I migrate my exhaustive keyword list from my previous version of PS, CS5 to CS6?

I upgraded to PS CS6 and failed to export the exhaustive keyword list I had created by adding personal keywords to the "Controlled Vocabulary Keyword Catalog" I was using in CS5. I thought I'd be able to open my previous version of CS5 to export that catalog, but every attempt to open PS CS5 or the Bridge CS5 defaults to CS6.
I would love to go back and open my previous version to export that catalog rather than trying to recreate it from a new Controlled Vocabulary Keyword Catalog download.
Thank you in advance for any help you may provide.

Thank you for your help, but I found a file called Adobe Bridge Keywords.xml that only contained the default keywords that are contained in the startup version of PS. I didn't find the exhaustive list that I created in CS5 Bridge. Is there another place that I could find that entire list including the heirarchy?
Or is there a way to open the old version of Adobe PS Bridge CS5?
Thanks Curt Y

Keyword List doesn't show the correct images when clicked

I'm using LR 2.3RC on a Windows Vista Ultimate PC, although the same error occurs on LR2.2.
I have a keyword structure "Karl > Family > People" with Karl having 33 images with this keyword. When I use the "Keyword List" on the right panel in the Library module to display these images I get over fourteen thousand images in the grid! This doesn't happen when I use the "Library Filter" bar above the grid.
What gives?

Don,
the result of clicking on "Karl" should display 33 images in total. In fact I'm getting 14,589 of a possible total of 14,734 in the catalogue. This hardly a limitation, rather the opposite I would say!
John

Subsequent device(speaker) detection over USB, results in new interfaces in the list(System Preferences- Network)

Hi,
There is a problem when device(speaker) is unplugged and plugged in Mac OS version 10.7.5
Every time unplug and plug the device over USB and re-plug, new interface is added in the list System Preferences->Network.
For example, if the device interface name is device20, when the device is plugged first time, system shows "device20" in the detected device list i..e in System Preferences->Network. But next time when unplugged and plug again the device name gets changed(device number gets incremented), i.e. "device21" will be displayed. So if repeatedly unplugged and plugged, the device number gets incremented everytime and added to the list as device22, device23,....etc. The list will grow with many entries if we repeatedly unplug and plug the device.
I am not sure why the system is behaving so. You help/support will be highly appreciated.
Thanks in advance.
- Tejonath

Hi,
There is a problem when device(speaker) is unplugged and plugged in Mac OS version 10.7.5
Every time unplug and plug the device over USB and re-plug, new interface is added in the list System Preferences->Network.
For example, if the device interface name is device20, when the device is plugged first time, system shows "device20" in the detected device list i..e in System Preferences->Network. But next time when unplugged and plug again the device name gets changed(device number gets incremented), i.e. "device21" will be displayed. So if repeatedly unplugged and plugged, the device number gets incremented everytime and added to the list as device22, device23,....etc. The list will grow with many entries if we repeatedly unplug and plug the device.
I am not sure why the system is behaving so. You help/support will be highly appreciated.
Thanks in advance.
- Tejonath

Keyword list system standardizing

Similar Messages

Maybe you are looking for