Keyword search address change, has no effect.

Long time ago I added Google Maps as a keyword search (maps <address>), which hasn't been working for a while.
After a little research, I've found out, that I had to change the URL for the search, the problem is though, that I can't find the bookmark anywhere! I've tried to create the bookmark again, with the correct URL, but somehow the old keyword has a higher priority, and therefore I'm still directed to the blank Google Maps page.

See how [[Smart keywords]] feature works.

Similar Messages

  • Wrong Channels Being Mapped for 5.1 - Changing Has No Effect.

    I just setup a new edit suite using a Blackmagic Decklink Extreme 3D Card, running on a PC with Windows 7.
    Initially my 5.1 channel mapping required altering in Premier to get the correct output to the correct speakers but once sorted all worked great.... until today! For some reason no matter what I do some of the channels are now mixed up, and changing the mapping preferences has no effect. I am getting the Centre channel coming from the Rear Right and Rear Left is coming out of the Sub! I have my preferences set to output from the BlackMagic Audio Device, but even swapping left and right channels has no effect.
    If I flick over to Audition and map the channels for a 5.1 mix it works fine and has the correct output which I guess rules out a problem with the DeckLink. This is REALLY frustrating me, any suggestions or advice on what could be the issue with premier would be greatly appreciated!

    Moderator advice: Please read the announcement(s) at the top of the forum listings and the FAQ linked from every page. They are there for a purpose.
    Then edit your post and format the code and CSS correctly.
    db

  • Imovie volume change has no effect.

    I don't quite understand what's going on here. It used to work fine, but now when I attempt to make any changes to audio tracks, it doesn't work. Ducking, fade-in, fade-out and even adjusting the volume of a single clip, are all no longer possible. The sliders move and there's no error message, I click done in the box, and voila, no change has occured! Even reducing the volume to 0% doesn't work. I have not made any significant changes in hardware or software-nothing that affects the operating system or Imovie, that is. I can't understand why a program would just suddenly lose capabilities for no reason. No other program on my computer is exhibiting any problems that weren't there before this started happening-otherwise, I'd suspect a failing hard drive, or a need to defragment or re-install OS X.
    I have noticed several other posts with similar problems. I would suspect a software bug (i.e. a mistake in the development) but Imovie '11 used to work fine, and this problem didn't crop up following an update. Could such misbehavior mean I need to de-frag my hard drive? It's not like the project I'm working on is to blame because I tried starting a new project from scratch, and the same thing still happens.
    If I don't get an answer, I may re-install Imovie to see if that helps anything.

    Another general purpose trouble shooting step is to Run Disk Utility: Repair Permissions on the whole hard drive. Then reboot the Mac and see if the sound editing functions come back.
    Similarly, deleting the Preferences file for iMovie can help in some cases (another general purpose step) Go to Mac HD>Users>(your home folder)>Library>Preferences>com.apple.iMovie9.plist and move that file to the trash. Restart iMovie and try to set the volume on that clip again.

  • Keyword Search in Bug Toolkit - How effective is this search method for you?

    When searching by keyword(s) in Bug Toolkit, do you receive relevant results or do you often have to redo your search?  Any specifics you can provide would be helpful!

    When searching by keyword(s) in Bug Toolkit, do you receive relevant
    results or do you often have to redo your search?  Any specifics you
    can provide would be helpful!
    Hi,
    With my experience i need to redo the search and very rarely i get in first attempt.But onething sure with previous experience bug tool kit search is good now at least it provides results with asked key word and search results are fast also.
    Ganesh.H

  • Remote content bar does not appear for some emails with images specifically daily Twitter updates. Changing options to allow all remote content has no effect

    The broken image symbol appears in place of the images but associated web links do work ok.
    Changing options to allow all remote content has no effect. Senders' addresses are in my address book and on the exceptions list.
    Some emails (from other sources) load perfectly. Using Kaspersky Internet Security 2015 on Windows 8.1. Thunderbird 31.4.0
    Any help appreciated.

    You only need to post a URL to your web site. We can see your code in Browser.
    So, your page looks OK to me in Firefox, but when I tried to check it in IE, it choked my browser and closed it.
    You have quite a few code validation errors - no document type declaration, etc... Start by fixing these reported errors.
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fntp.neuroscience.wisc.edu%2F
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • Searching from the url address window has stopped working

    If I type a string in the url address bar and touch enter, I now get an error message saying that it's not a valid web address: "The URL is not valid and cannot be loaded." It no longer searches in google for results. I've checked my about:config settings and they seem fine; keyword.url status is "default" and type is "string" with a blank value; for keyword.enabled, the status is "default", type is "boolean", and value is "true".

    Hi,
    You can also check '''browser.search.defaultenginename''' which has to be '''Google''' in this case.
    If problems persist you can use [https://addons.mozilla.org/en-US/firefox/addon/searchreset/ SearchReset].
    [http://kb.mozillazine.org/About:config about:config]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    The [https://services.addons.mozilla.org/en-US/firefox/discovery/addon/config-descriptions/ Config Descriptions] add-on adds helpful source comments in about:config.

  • HT5622 My email address changed, my iCloud still has my old address. Do I just cancel the existing one and open a new one under the new address or what?

    My email address changed, my iCloud still has my old address associated with it. Do I just cancel the old iCloud and start awe one or what?

    Hello sheryfromzaf
    Check out the articles below to go through the steps of changing your Apple ID and then what to do after you change your Apple ID. You will probably not have to change all the Apple ID for all services, just the ones that you use.
    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/ht5621
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796
    Regards,
    -Norm G.

  • HT203167 I had itunes on another laptop which is no longer in use.  I have changed my apple id to my email address which has completed fine.  I cannot find the itunes I had on my account before that I had on my other laptop.  Can you help?

    I had itunes on another laptop which is no longer in use.  I have changed my apple id to my email address which has completed fine.  I cannot find the itunes I had on my account before that I had on my other laptop.  Can you help?

    Your music will only be where you put it. It does not magically appear in other places.  Copy it from your old computer or your backup copy of your old computer.
    If for some reason you have failed to maintain a backup, not good, then you can redownload some itunes purchases in some coutries:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Ineffective Keyword Search (keyword.URL) changes in 23+

    Refering to https://support.mozilla.org/en-US/questions/963439, closing this thread is not sufficient for us users. Please let us vote about this change, or most people (like me) will downgrade or use addons that will disable this "security" feature.
    Please make a better solution, or chrome or another browser will do.

    The search engine that is used on the location bar and on the about:home page is the search engine that is selected in the search Bar on the Navigation Toolbar.
    You can install the Keyword Search extension to specify with search engine to use for the location bar and which search engine to use for the about:home page via the Options/Preferences windows of this extension, accessible via the about:addons page.
    * Keyword Search: https://addons.mozilla.org/firefox/addon/keyword-search/
    Another possibility is to disable keyword search (keyword.enable = false) and use a (one letter) keyword search for searching via the location bar.<br />
    You can add a keyword to an installed search engine via Manage Search Engines (click the search engines icon on the search bar) and you can add a keyword to a bookmark in the Bookmarks Manager (Show All Bookmarks).
    * http://kb.mozillazine.org/Using_keyword_searches
    That will allow to switch easily between search engines when you search via the location bar and there also is no problem with a one word search.

  • Changing bounds origin of UIView has no effect

    I try to pan/scroll a big image(500x500) in a small frame (200,200) like in Google Maps. Changing bounds origin of UIImageView has no effect. The same part of image is displayed by the view.
    IBOutlet UIImageView *image;
    -(void)touchesEnded:(NSSet*)touches withEvent:(UIEvent*)event
    CGRect bounds=[image bounds];
    bounds.origin.x=bounds.origin.x+10;
    bounds.origin.y=bounds.origin.y+10;
    [image setBounds:bounds];
    Does anyone have any idea what is wrong?

    Ok, I found out what's wrong.
    To "pan" an image you have to change bounds origin of PARENT view.
    - (void)applicationDidFinishLaunching:(UIApplication *)application {
    CGRect viewRect = CGRectMake(50, 50, 100, 100);
    UIView* myView = [self createView:viewRect withColor:[UIColor redColor]];
    UIView* childView = [self createView:CGRectMake(0, 0, 50, 50) withColor:[UIColor blueColor]];
    [myView addSubview:childView];
    [window addSubview:myView];
    myView.clipsToBounds=TRUE;
    myView.bounds=CGRectMake(45, 45, 100, 100);
    [myView release];
    [childView release];
    [window makeKeyAndVisible];
    -(UIView*) createView:(CGRect)viewRect withColor:(UIColor*)color
    UIView* myView = [[UIView alloc] initWithFrame:viewRect];
    myView.backgroundColor=color;
    return myView;
    }

  • I have changed my e-mail address on the apple ID website and have been able to change it for ICloud.  My e-mail address (ID) has not changed for I-tunes and therefore, I can't install updates. ??

    I have changed my e-mail address on the apple ID website and have been able to change it for ICloud.  My e-mail address (ID) has not changed for I-tunes and therefore, I can't install updates. ??

    If this is on your computer's iTunes then log out via the Store > Sign Out menu option and then log back in with the updated version of your account. If on an iOS device then tap on your id in Settings > iTunes & App Store and log out and then log back in.

  • Change of Min Pool Size has no effect?

    Hi, we are still using odp 9.2.0.4 on windows server 2003 webserver and oracle database 9i on Sun solaris. Recently we discovered a problem using Min Pool Size = 1, it seems that if new connections are required we sometimes get a connection timeout. So we decided to set Min Pool Size = 30, and on the testserver this works fine. In the odp tracefile (tracelevel=2) you see the 30 connections building up immediately. But on the production server we see no difference, it looks like the (new installed, application pool reset) application still uses the Min Pool Size = 1 setting.
    The connection string is build up in application code. On the testserver it was sufficient to stop and start the website and its application pool, on the production server this has no effect.
    Does anyone have an idea what the problem is??? We also tried restarting the IIS server, that did not help either. In production there are more applications using ODP.
    Regards, Paul.

    What problem are you trying to solve at this point? Simply "why is odp not tracing?" The only suggestions I really have there are
    1) make sure you restart the app after enabling tracing parameters
    2) make sure the directory you've set tracing to is open as far as permissions
    3) make sure you've set tracing in the right registry setting if you have multiple versions of ODP installed
    4) if you're trying to write to c:\ root, try creating and pointing to a different (c:\odptrace for example) directory instead.
    Hope it helps,
    Greg

  • My email address book has been hacked, how do I change my password on an hotmail account.?

    My email address book has been hacked, need a new passwork for my hotmail account. How is it done?

    Go here >  Forgotten password and other sign-in problems - Windows Help
    Then click: I think I've been hacked

  • CS3 Bridge keyword search failure

    To the best of my knowledge this particular issue has not been covered in the dozens of prior posts about keywords.  I apologize if I've missed it.
    My photos, by the nature of their creation and paperwork generation, are organized by overall dividers, year, month, partial alphabetic breakdown, and customer name, respectively.  I have a need to be able to find photos across all folders throughout the hierarchy that are of the same person.  I've been using keywords of the individuals' names to accomplish this and it has been tremendously effective.
    In 2009, it became necessary to move all images archived in 2008 to another location on the server.  As one might expect, the keywords didn't jive with the index (my reasoning, anyway) and search functionality was ineffective.  Not long thereafter, the functionality came back - most likely by way of a non-indexed keyword search.
    The same issue has occured this year in that all the images shot in 2009 had to be moved.  I have changed the manner in which the structure is built to prevent this from being necessary again in the future, but the keyword search is now not functioning again.  However, this time I am unable to re-establish it.  I have tried multiple non-indexed (with subdirectory) keyword searches both across the entire server and in smaller folder breakdowns.  I have cleared the cache and searched again.  Even if I open a folder with brand new files and verify keyword presence and accuracy, a search inside that specific folder will not return a result.
    The question is: What have I done / missed?
    Even if it had nothing to do with moving the 2009 files, I may have done something to knock something askew that's impeding my search abilities.  I don't use Bridge for very complex tasks, so I might need some extra help, but I'm keenly interested in your ideas and expertise.  Assistance in any form will be appreciated.

    Im geting the same... I tried refreshing cache etc... but no avail...

  • Can I search email archive on iCloud server from iOS device, or can I only search what it has downloaded locally?

    Can I search email archive on iCloud server from iOS device, or can I only search what it has downloaded locally?
    I currently have an iPhone and iPad, and am soon changing over to a Mac. When that happen I'd like to try to see what I can migrate over from the Google ecosystem to the iCloud ecosystem.
    1) Currently I have the Gmail iOS app (a webapp container) that can search server-side of several years of email archive.  Can iCloud do this using the iOS native mail application?  Or is the search just limited to what the device has downloaded locally?
    2) Do I have to use a @me.com address for the full iCloud email sync to take place between server, Mac, and iOS devices?
    Believe it or not I've read quite a bit about the iCloud services, but the answers to these questions were far from clear.  Many thanks for the help.

    2)  iCloud only syncs email between .me/.mac addresses.  For other accounts like google, you set up the account in the mail app and if they're IMAP accounts, you can sync between the google server and any devices you have defined that account on.
    I'm not absolutely sure about 1) since I haven't had to search going back years - I use MailSteward for that on the mac.  On my iPhone/iPad, when I go into a mailbox and the emails are not immediately available, it downloads them.  I suspect for a search, you need the emails downloaded.

Maybe you are looking for