Keyword used per Keyword HUD, but not on any image per filtered search?

On the keyword HUD I try to delete a keyword and get the warning that the keyword is used by two versions, so I don't delete it.
I then go to a smart album showing all library photos and attempt to search for images having that keyword and nothing else (also don't have 'stack picks only' checked). This finds nothing!
How can this be? I even searched the trash and nothing there either that matches the keyword that supposedly exists on two versions.
Regards, Strathglass

Guys,
Before you chalk it up as a bug, check your keyword HUD for the same keyword appearing in different parts of your keyword hierarchy.
I had a situation occur where I exported some keyworded raws as jpegs to create a pano. When I reimported the resulting pano done in PSE 6, the keywords came back across into Aperture, but at the top level of the keyword hierarchy. For example:
(1) Aperture keyword was animals/reptiles/snakes/Venomous
(2) On re-import, I ended up with keywords of animals, reptiles, snakes, and venomous in the top level of the keyword structure.
Result = same keyword but in different locations in the hierachy. Confusion!
This also happens when you import photos that were keyworded in an external app, but I'm not sure of the extent of the occurrence.

Similar Messages

X1 Carbon integrated camera working but not showing any image after Windows 8.1 upgrade

Good afternoon, sundely after I upgraded Windows to version 8.1 64x my integrated camera stopped sending image to any program that uses it, the green light goes on but there is no image. Before worked just fine.I have tried to uninstal and install again camera drivers, installed Lenovo dependency package, etc....no solution.Please help?Thanks Sergio

I resolved my issue by going to device manager selected View then View Hidden Devices.
Expand System Devices
Found two IWD BUS devices and one had the yellow triangle. I uninstalled that item and restarted my Carbon X1 and the error was gone. The original working IWD BUS remains active.

Start routine: only once per teh load but not once per data packet

Hi,
I would like to execute some code in start routine (in update rules) only once per the load but not once per the data packet.
How can I implement this.
Regards,

I once had that same requirement, but in a datasource in R3. I'm not sure if the same solution would work in BW, though. I used a memory id to keep the variable value between packets:
DATA: ... n_globalvar TYPE n ...
then I added...
IMPORT n_globalvar FROM MEMORY ID 'ZMEMID01'.
...at the start of the routine to retrieve to the variable the value from the memory id.
At the end of the code, I exported the variable back to the same memory id...
EXPORT n_globalvar to MEMORY ID 'ZMEMID01'.

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Hi Ankita,
Try to trace at ICM level, Go to smicm transaction
Set level to 3.
Later send your request. Finally trace the request in:
When you have seen the log, check if any exception is raised with your request or the request and share it here.
Regards.

Adobe form-Able to post data using Adobe Reader 9 but not with Adobe Proff

Hello Guru's
I am facing one problem with adobe forms.
We have develoed a adobe form using adobe reader 9.
Now when user are posting the purchase requistion using the form,they are able to post the data using
Adobe Reader 9 but not with Adobe Reader professional.
Can anyone please advice me what can be the problem here.

Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video?

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video? How can I fix this?
Baffled in SB

What format of MPG is this? Is this an MPEG1 or MPEG2 video? How was the video created?

Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers.

Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers. Is there an efficient way to this?
I'm thinking I can convert the files with Compressor and place them in a new folder with their original file names (not sure how to get compressor to do this yet) and then do a major "Reconnect Clip" afterwards.
Not sure if there's a more efficient way to get all the clips in the timeline to compressor. I want the full files, not a sequence export. I can go through one clip and a time and add the master file. I'd rather not.
The more automated processes the better.
Thank you. I'm currently working so I don't have the time to scour the forums. Help or links to help would be greatly appreciated.
B

yeah Media reconnect can be an issue.
Will Media Manager convert files? Another thing I was thinking was to Media Manage the sequence out, copying all the used files to a new folder, and then running that through compressor. But it still leads to a massive reconnect. Fine tuning all those edits would be less involved than re-editing the whole thing, I hope.

HT5105 I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

Probably best if you could post screen shots of the Inspecror window in extended view with a couple of the clips you using for the 2 angles.
If you have audio from both cameras and have identified them separately, the sync is usually pretty reliable.
Russ

I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

GACU,
OK, now I think I understand your problem.
If it is your calendar that is being shared with other users who have been granted editing priviliges, you will not be able to exclude those events from printing.

How can I set Firefox 8.0 to accept 3rd party cookies ONLY from selected sites but NOT from any other sites?

I do not like to accumulate 3rd party cookies and would simply not check the Accept 3rd Party Cookies box in Preferences. BUT in order to use my bank's web page I have to accept 3rd party cookies from a separate site that manages some of their transactions (like paying bills). This means I have to accept 3rd party cookies and then delete them by hand OR I have to check the accept box each time I use the bank's website and then uncheck it when I am done.

Thanks, but that is not what I was trying to do. I do not want to block cookies from a single site. I do not want to block all 3rd party cookies.
What I want to do is ACCEPT 3rd party cookies only from ONE site but NOT from any other site.

Ever since I had updated my phone to ios 6, i noticed that it no longer saved photos to my camera roll. If i download a picture on on an app, it will not automatically save it to my camera roll as it used to do, nor does it save any image

Ever since I had updated my phone to ios 6, i noticed that it no longer saved photos to my camera roll. If I take a picture on Instagram, it will not automatically save it to my camera roll as it used to do, nor does it save any image, I just want it fixed.

To gdgmacguy your a f****** idiot for one I'm having the same problem as pennymar. And you tell me to quit whinning. You got more problems then the iOS 6 you did not answer my question nor the other 13 or whatever you replied to within a 30 min time frame. You must got nothing better to do then to harass people and to pretend you know something about apple products. Which you don't from what I've read the other advices you should have gave to other people. But you didn't you replied a question back to the people asking a question. So if your not gonna use these community forums the right way don't use them at all.

(PDWordGetAttrEx(pdWord, 0) & WXE_LAST_WORD_ON_LINE) is working in one document but not in any other

Hello,
I am using (PDWordGetAttrEx(pdWord, 0) & WXE_LAST_WORD_ON_LINE) to get the line breaks in a pdf document. I'm getting the correct results on the plugin_apps_developer_guide.pdf (The reference guide for plugin development to Adobe Acrobat), but not on any other pdf document. I've tried the code on both tagged and un-tagged document, but only this document is giving me the right result.
Can anyone please guide me what can be the possible reason in this and how this can be handled.
Thank You
Vaibhav

Hi Srikanth,
1. why there is no space between "HR.tblPeople" and "ORDER BY" in your query? I am surprised it works initially.
dim objcmd as new OledbDataAdapter _
("SELECT * FROM HR.tblPeople" _
& "ORDER BY LastName, FirstName",objConn)
2. use
Dim ds As New DataSet()
Sinclair

My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or apllications

My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or applications.

Hi,
can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
Regards
Ryan

No sound. Mute is not checked, volume all the way up on iTunes and on status bar. What am I doing wrong or missing? I restarted last night and it worked before that but not since, any one have any ideas?

No sound. Mute is not checked, volume all the way up on iTunes and on status bar. What am I doing wrong or missing? I restarted last night and it worked before that but not since, any one have any ideas?
Thanks, Rob

First off did you go to System Preferences > Sound > Output > And is the correct output selected?
Any red light coming out of the headphone jack? If so, you'll need to re-set the little switch in there by inserting a 3.5mm jack carefully in & out 20 odd times. Or grab a toothpick (non-conductive) and a flashlight.
Tried anything else that produces a sound? On restart do you get the chime? Perhaps check into Audio Midi Setup to ensure your output is selected correctly using the cog at the bottom left.

I have an iphone6. And out of the blue my group messages aren't working. I can send but not receiving any back.

I have an iphone6. And out of the blue my group messages aren't working. I can send but not receiving any back. Any ideas??? I already reset my phone twice.

You should check that your settings (both directions) match this:
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead.
Your signature says you have 10.6.8 - is this correct? If you migrated from MobileMe using this your mail settings won't be correct and you will need to follow this procedure to re-enter them:
Entering iCloud email settings manually in Snow Leopard or Leopard

Keyword used per Keyword HUD, but not on any image per filtered search?

Similar Messages

Maybe you are looking for