Keywords are not being assigned to photos, Lightroom 2.3

I have recently installed 2.4 and after several bugs, I uninstalled and went back to 2.3 more stable version, everything is still the same ever since, that is:
Still I get the triangles I didn't use to get (I have been using the very same camera, with the same settings for ages now)
Still I get freezing when I assign keywords to single or multiple photos either by the spay tool or the keywording small panel, or the keywording big panel, or even the Keyword list. It simply doesn't register keywords!!!
I closed application and opened again
I repaired installation of 2.3
I changed from develop mode, to loope mode to grid mode
I save my keywords a preset and just clicked them to assign them in one or multiple photos (some times it works sometimes not)
I restored keyword set presets
I used all ways of inputting data=keywords and the system does not respond
hence I cannot really use the most powerful tool of that software that is the keywords, which is frustrating enough all right
I would appreciate your suggestions and ideas of work around's, cheers!

Sorry Sean but my problem is not the list of bugs but the keywords not being assigned to my photos as posted initially. So, in this sense I don't find your post much helpful to be honest.
That's fine, the list wasn't for you, it was for Pete Marshall.
Anyways, I upgraded back to 2.4. Indeed I do believe that its my slow system and processor that is causing the problems. When I fire up lightroom, I close everything else and I still get my fan speeding and pc's heart pulpitating, you know!!
1. I also get other problems like looping the image view for some time before it renders a larger review of the photo I am looking, if I move fast between views. (therefore I can't see the image since it keeps on/off looping)
This is because it's taking ages for your computer to render, due to the low spec. Rendering is quite intensive, so needs lots of power to be quick.
2. It doesn't seem to create virtual copy, but only at times (preferably when it feels like it). I get errors similar to the following.
The virtual copy should always be created, but can be only readily be seen when in the same folder as the master.
3. ...and also I get errors trying to save a Quick collection, like: "Internal Error has occured: C:\....\\Lightroom Catalog.lrcat":PRIMARY KEY must be unique. Statement: INSERT INTO AgLibraryTagImage (Id_local, flattenedParams,image, pick,
Well, you really shouldn't be seeing bare SQLite instructions, so something is definitely up. Try using Relaunch and Optimize from the Catalog Settings 'General' tab. This should detect if there are issues with the catalog itself. Some of the things you are experiencing are due to the speed of the machine, but I don't think all of them are.

Similar Messages

Some computers are not being assigned IP addresses WRT54G

We have Wireless-G (WRT54G)
Recently our cable modem went out and was replaced. All the computers that were connected at the time are accessing the internet just fine.
However, any new connections (or re-establishing connections after powering off) are not being assigned an IP address.
Attempted Wi-Fi connections find the router, successfully log in, but do not have a Wi-Fi connection. I trust this is also because no IP address is assigned.
Firmware 2.02.7
Help!
Message Edited by jbarrick on 06-20-2008 10:15 AM
Message Edited by jbarrick on 06-20-2008 11:22 AM

Reset the router for few seconds ....Access the setup page of the router by launching an
Browser and type on the address bar, 192.168.1.1 and press enter. When
it prompts for the username and password, leave the username field
empty and provide password as "admin" (Without quotes)
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If not ... power cycle for 4-5 minutes & then again check the WAN Ip address .....If getting valid Ip ...try going online ...
If not then upgrade & again follw the same steps ....

New photos taken with my iPhone 4s are not being uploaded to photo stream...

Last weekend I tool a few photos with my iPhone and they were uploaded to photo stream as soon as I connected to wifi. I was able to see them on my iPad and MacBook Pro as sooon as I opened iPhoto...
Today I took a few more but they were not uploaded to photo stream when I connected to wifi... I reset photo stream and now it will not update...
I havent really changed any settings on my iPhone... What can I do???

Me too, I'm looking for help for that kind of problem.
Two months ago, I posted this:
hello,
Once Icould control panel is opened on my computer, how can I send the files from my phone ? Because they are not coming by themselves.
When I click on "Manage", I do see a back up made made in end 2013. How can I access to it from my computer ?
And another question: In "photo stream options", when they say: "...and upload photos you add to your photo stream from this computer", the upload is only for photos which are inside the Icloud folder "photo stream", right ?
If there is a photo on desktop or in "my pictures", it won't be uploaded ? Because I share my pc with someone and I don't want other things end up on my Iphone.
Thank you for you help.
https://discussions.apple.com/message/26286169#26286169

Keywords are not showing up on photos

After going to great length to assign keywords to my entire photo library, I burned all the photos onto iPhoto DVDs in preparation for my computer getting a new hard drive installed.
After new hard drive was installed, I reinstalled iPhoto 4.0.3 and uploaded all my photos from the DVDs. I noticed that my keywords pane had reverted to the default keywords (because I hadn't backed up my plist file for this), so I added all my keywords back into the pane (and deleted the defaults I didn't need).
Now there are only three keywords (out of a possible 12 or so) that are showing up. Favorite, Vacation and 4H.
Why aren't the others showing up??? Is all my hard work lost?
Sandy

Unless you really know what you're doing, the only way to preserve keyword associations is to preserve the entire iPhoto Library folder. Had you burned the entire iPhoto Library folder to disk, your new installation would have only required that you drag the iPhoto Library folder from the disk to the new Pictures folder and launch iPhoto.

Sharing photos by email - Emails are not being received

My photos which I have shared by email are not being received, even though I have a confirmation that they have been sent (one photo has been sent).
I am using a @me.com email address and I have tried to send a photo to myself and this has still not been come through.

Do you have iPhoto setup to email the photos itself or use Mail to email the photos?
Happy Holidays

Photos I delete in library are not being deleted from hard drive

Help please. I have been trying to delete photos from the iPhoto library (Events and Photos) and emptying the iPhoto trash can. This is supposed to erase them from the hard drive. However, when I look in the hard drive in the Pictures folder, the photos I deleted are still there. Could someone tell me what might be wrong? Thanks!

I'm running a managed library.
Let me see if I can understand this. The problem has to do with the place I was looking at. I was looking in the pictures folder in the hard drive. Now, the pictures inside the iPhoto library are the ones that are deleted from the hard drive, and the ones in the Pictures folder are not being touched at all. So I have two separate folders with pictures: the iPhoto library folder and the Pictures folder inside the hard drive.
Since I'm going to be using iPhoto exclusively I might as well delete that other Pictures folder in the hard drive. If I delete the pictures in this folder, would that affect the pictures I have in the iPhoto Library? I'm thinking no since iPhoto has made copies of all those pictures. What do you think?
THanks for the info TD

Photos are not being transferred from my iPhone

When I plug my iPhone into my Mac Mini running Lion my photos are not being transferred to my mac even tho the sync completes. The phone is running ios 5
Help

I'm just clarifying here. It sounds like you are using iTunes to sync your iPhone, which is fine, but iTunes isn't built to remove the photos off your phone and put them on your computer. Try opening iPhoto and importing all your photos there.

My photos are not being rec'd from either Adobe photoshop 10 or 11???

My photos are not being rec'd from either Adobe Workshops 10 or 11? Help. I have always been able to send via emai photos from Adobe 10 never have I been able to send them thru 11??/

Hello dbe.
Please check to see if a borderless paper size has been selected before printing.
If borderless printing is enabled, you may experience a cut off on the outside areas of the image. This is the only way that an edge to edge bleed can be done.
To retain the entire image, the bordered option would have to be used for printing.
Please visit the following link below to contact our support group for additional assistance.
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Photos taken on my iphone are not being streamed to my computer, previously they were. what can i do to resume streaming to my pc?

photos taken on my 4S are not being streamed to my Windows 7 pc. Previously they were. What needs to be done?

Hi Kathryn ...
Start menu, choose Control Panel > Network and Internet > iCloud
Deselect the box next to Photo Stream then reselect it then restart your computer and iPhone.

My jpg files from CR2 edits in CS6/CC are not being imported into LR5.

My jpg files from CR2 edits in CS6/CC are not being imported into LR5. Bridge and Explorer can see them ok. Tried to reimport but LR5 cant see them.
The file numbers are the same as original CR2 but have the jpg extension. TIFFS and PSDs seem ok. Can anybody help please?

how do I get all these files in my catalogue in the correct places cos they scattered around a bit
That's kind of a broad question ... and there are many different approaches ... so I will explain my approach, and other people can explain their approach.
My approach is to assign keywords and optionally captions and titles and other metadata to all of your photos, and use those to organize and search. Then, it doesn't matter what folders things are located in, if you want to see all your pictures of Chicago, you simply click on the arrow to the far right of the keyword Chicago. You don't have to remember what folders to look in, and this works even if the photos are scattered in a dozen different folders. In addition, since photos must be in one and only one folder, that limits your ability to organize; but you can assign as many keywords as you'd like to a photo, so a single photo can have keywords "Chicago" "Zoo" "Elephant" "Vacation" "Illinois" "United States" etc.

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

I'm being asked to enter my ID password on my ipad for icloud, but the email is no longer active and reset remails are not being received.

I'm being asked to enter my ID pswd on my ipad 2 for icloud. but the email address and ID are no longer being used, and reset emails are not being received. How can I deactivate this? I have another ID which works fine, but this issue with the old ID is not allowing me to use my ipad. thanks.

If your iPad is signed into an old ID and you are trying to change it, if the old ID is yours, and if it is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Handling Unit not being assigned to TO for an outbound delivery

Hi All
When I create a TO for an outbound delivery then a handling unit is not being assigned to the TO.
I cannot confirm the TO as it complains about the non assignment of HU.
I have done the following so far:
1. Set up a default packing material w.r.t WhNo and movement type.
2. Defined a packing group and then assigned the packing group to the packing material.
3. Set 1 to the indicator for automatic HU creaion in customizations for automatic HU creation.
Is there something I am missing in the configuration?
Any suggestions would help.
Thanks,
Arup

Hello,
HU never get assign at the time of creation of TO. You can assign pick HU at the time of confirmation of TO. There are two ways
Use transaction code LH01 and assign pick HU
OR
(ii)Or at the time of confirmation of TO click on pack tab and complete the packing
Thanks,
Milind C

Per-service SID's are not being granted correct permissions

Hi,
I had posted this here :
https://connect.microsoft.com/SQLServer/feedback/details/770984/per-service-sid-s-are-not-being-granted-correct-permissions, but no response as yet.
When installing SQL 2012 (on a VMWare VM), based on the following article :
http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110), I have noticed that the SQL per service SIDs are not being granted the correct permissions. From the initial install, the following is what was observed (the red x's being permissions that
should have been granted but were not).
When re-installing and changing from specifying a domain account, to the default values, during set-up, the 4 service SIDs that were not added to 'Log on as a Service' initially were then correctly granted permission, but the other 4 in 'Bypass traverse
checking', 'Adjust Memory Quotas for a process' and 'Impersonate a Client after authentication' were still not added.
When running a repair on this install, 'NT Service\MSSQLFDLauncher' was then granted the correct permissions, but 'NT SERVICE\MsDtsServer110' was still missing 'Bypass traverse checking' and 'Impersonate a Client after authentication'.
This also resulted in the installation of Reporting Services - Native failing in the original installation with 'Attempted to perform an unauthorized operation'.
If anyone has recently installed SQL 2012, can you check (via gpedit.msc) that the correct 'User Right Assignment' was granted to the per Service SIDs as per
http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110) ?

Have you resolved this yet? Group policy for the OU with my desktop removes all SQL per-service rights. If group policy is your issue, I'd be interested in how some are retained.
Randy in Marin

Images are not being display in people search for few users - why ?

Hello,
In my farm, users having profile picture in UPSA and they are able to see in My Profile page as well.
However when I find user in People search - images are not being display for few users while for others it works.
I have checked picture property which is indexed and then I run full crawl still its same issue.
Following are the settings for Picture Property - would you please let me know why its still not being display in people search ?
Dipti Chhatrapati

Dipti,
Hope below urls will help you,
https://littletalk.wordpress.com/2010/12/10/people-search-result-doesnt-have-images-in-sharepoint-2010/
https://social.technet.microsoft.com/Forums/office/en-US/eea8aa10-4565-41bf-98ec-dc93fb600021/some-users-pictures-are-not-showing-in-people-and-groups-but-are-viewable-in-the-thumbnail-and-my?forum=sharepointgeneralprevious
http://westerdale.biz/sharepoint-2010/display-active-directory-profile-thumbnail-photo-and-other-attributes-in-sharepoint-2010?doing_wp_cron=1421939809.4895009994506835937500
Sudip
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Keywords are not being assigned to photos, Lightroom 2.3

Similar Messages

Maybe you are looking for