Keywords in Master file and AP database-- Export Problem.
I believe that I have a conflict with keywords. I believe that I have "baked in" keywords by writing IPTC to the Master files and then added more keywords which I am guessing are in the Aperture database and not "baked in". When I then look at exported images using the XMP sidecar file with Adobe Bridge all of the keywords do not show up. I want to experiment with Lightroom and I want all of the keywords.
My process has been:
1. Add keywords to images from the keywords panel.
2. Write the IPTC metadata to the master files.
3. Add more keywords to the images from the keywords panel.
4. Export the images using the File/Export Masters/Create IPTC4XMP sidecare file.
5. Look at the exported images in other applications (Bridge and PhotoMechanic).
How can I export using XMP sidecar files and have ALL the keywords be exported???
DickB
Yes, this is a known problem; sqldev distinguishes between the Constraint and the Index although the former implies the latter...
Regards,
K.
Similar Messages
-
Scheduled shutdown immediate and full database export
Hi all,
The database is Oracle 10g.
How to make a scheduled shutdown immediate and full database export ? I want to use a batch file for it so I can make a sheduled task from the windows control panel everyday at 2 am. So what to write in the batch file because I am a bit new to 10g ?
Thank you very much>
How to make a scheduled shutdown immediate and full database export ? I want to use a batch file for it so I can make a sheduled task from the windows control panel everyday at 2 am. So what to write in the batch file because I am a bit new to 10g ?No, you can't take logical backup after shutdown database.
If you want to schedule the logical backup of your database, just you can refer from here
Schema level
http://mohamedazar.wordpress.com/2010/04/18/datapump-scheduler-for-schema-level/
Full export
http://mohamedazar.wordpress.com/2010/02/16/dbms-scheduler-for-data-pump/ -
Is it better to output t master file and then upload to youtube?
I had to upload 33 videos to youtube today
This has taken tooo long
Just wondering, is it better to create a master file and then upload to youtube?
I could maybe just copy the files to another machine and leave it to upload?
Thanks
Omarjust to add:
don't try to upload your Masterfile to YouTube!
usually, the Masterfile is a copy of the projects timeline = proRes.
that creates incredible large files = time for upload, wasting bandwidth, and YT will complain 'wrong settings'
After saving a masterfile, which goes fast, you should use a 'Converter' of your choice (QuicktimePro, Mpg Streamclip, Compressor) to transcode into YT's recommended upload settings.- -
Having used FCExpress for a while I decided to give FC Pro X a trial, I created my first video with it, exported to youtube and it worked fine. I am now trying to export my second video to youtube and I get an error -50 which means absolutely nothing. Not being defeated that easy I tried exporting to a mster file using the H.264 codec and I get an error "exporting master file at frame 20074" - again another useless error. It takes at least 10 minutes to get to this error after the rendering has started, it gets about 12% in. Any ideas where to start - I am seriously at the point of giving up with Final Cut Pro X simply on the basis of it being more trouble than its worth - I am just glad I did not pay for it yet...
Any help would be much appreciated.
GerryHi Russ,
Thanks for your response. I am not an experienced user of FC or other video editing software but if its that hit and miss I think I will go to the trouble of finding some better software - I have a busy enough life as is, I don;t want to get into second guessing what a software problem might be!
I have just successfully exported my video to a master file using one of the Apple codec options so it looks like it could be to do with the H.264 codec. I am wondering if Apples Compressor software would solve this problem - the only way to try this it to buy it, there is not trial for the compressor app. Any ideas?
Thanks
Gerry -
Why, when exporting as master file from FCX, I have problem with sync
I edited all audio of a short movie in protools, bounced a stereo file, imported it in final cut and shared the master file at prores 422, from there through compressor I have created 2 files (mpeg 2 and ac3) and burnt a dvd but seems always to be out of sync , why?
fortunately i still have dvd studio pro that allow me to "nudge" the audio to fix the problem, but all this is quite time consuming.
any advice?I have fixed some issue about audio and video, created a new project with correct sample rate, imported the master video at same frame rate, and in pt bounced a new track of audio, so no orange bar, everything fine in FCX,AUDIO AND VIDEO PERFECTLY IN SYNC. i exported a master file at best current setting and in compressor have created a dvd setup hi quality, 2 pass vbr encoding mode etc
and.. imported the m2v file and ac3 in DVD STUDIO PRO, and on time line i hear out of sync, now i don't know if the problem happen during the encoding in compressor or is dvd studio pro. -
Is there a way where I can give an HTML File and pass database values to it?
Hello,
I have a Report that has Complex Layout with different Fonts,sizes etc.
After designing it in Front Page, the HTML Source comes to be around 180 KB. Portal Reports with Custom Layout fail to get this size of layout code( seems the limit is around 32KB).
Writing my own stored Package using htp/htf calls, but still I needed to paste this entire 180KB Code and replace the layout names with database names. This works fine but the readability of this code is ugly.
Is there a way where I can feed the database values as parameters along with the HTML File to pick substitute and then
show me the output?
Thank you.
Madhavyou can use dynamic pages!
-
Ordering jQuery Content in a Master File and a Dependent Page
Hey guys,
OT situation but thought you may be able to help.
I have a Mega Menu in a Template and Slider on a Dependent Page. The Mega Menu is going behind the page content. How can I properly order this?
RobActually, the master has a table and the page content is in a lower cell. The menu is a Superfish menu and the slider is Accordionza. In FF, things look ok except when there is a movie in a slider div. In IE, it is wrong, regardless.
Found THIS to be an answer for most content: http://www.onlinecasinodemar.com/webdesign/superfish-jquery-menu-ie-z-index-bug/
On the Vimeo video, the issue was old embed code. The iframe code works. Hope this helps someone else. -
Database Export problem (11.2.0.1)
hi all,
I am trying to export the database with the following command:
exp username/password@DEV FULL=Y File=C:\Export\dev.dmp log=C:\Export\dev.log
the user i am exporting have all the rights, all the objects are valid and still it is hanging on the system procedural and objects.
However other user can do export with same command and in the same database?
Please guide..
thankscan you post the screen you are seeing after you issue the command?
Is there any error message in alert file saying any has trace generated??
check the status of the job running...
select owner_name,attached_sessions,job_name,state from dba_datapump_jobs;
here check you jobs details..
-Regards,
Saha -
Hello DB2 guru's,
we are performing a AIX 4.3 DB2 V7 database extract using R3LOAD. (DBEXPORT.R3S)
The database size is 350GB. (with a table of 50GB, and 8x 20GB)
The challange is that we only have 3 days to perform the export.
This is already the 3th try and still nog luck.
13 of 15 processes finish succesfully but he 2 left keep on running it seems.
Allthough the TEMPSPACE tablespaces keep growing, so I can imagine it is exporting the 50GB table.
Is there a way to determine which table it is processing, and maybe to have an indication of completion time ?
If found a java tool : MIGMON but have no experience in that.
All help or comments are welcome...
Thank you for your time
HansHi guys,
thank you for your feedback.
We get to 83% in the export process. 13 of the 15 processes completed.
If I then check the TEMP tablespaces I see them growing to 50 a 60GB.
And then they are emptied and I loose connection and can start over again.
My assumption is that the (1X50GB, 10X20GB tables are the cause)
What can you advice specifically to solve the problem with those big tables.
Can anyone give an example of the MIGMON / SPLIT tool ? Or another advice ?
very much appreciated !!!
thanks
Hans -
When i try to export any clips to .m4v (movie to ipod) or .mpeg4 the video is exported but has no sound. When i select "export to .mpeg4" and click on "options" it says "audio: no audio track in source movie". This is the same message displayed on all the clips i have tried to export.
Does anyone know how i can record the audio for .m4v files or .mpeg4 files?
Thankyou so much in advance for your help.
.BenX
Windows XPI'm using Quicktime Pro v 7.0.4 on Mac. I tried exporting Quictime mpeg4 to iPod format and get only video but no audio! And I'm talking Apple all the way. These files were made from a Sony digital camera with the digital video record option.
Believe most (if not all) Sony digital cameras still use MPEG video format. As such, the files contain a "muxed" stream consisting of blocks of video data interspersed with blocks of audio data for A/V synchronization. As Kirk alluded to above, QT is a "frame-to-frame" sync application and does not fully support "muxed" (e.g., MPEG1, MPEG2, VOB, some AVI, MJPEG, etc.) formats.
I do use a 3rd party program called Snapz Pro X to capture to .mpeg4 and these files export just fine to iPod format!
Good solution for capturing streamed video but not the best here. As you suggested, use a third party, MPEG based application like iSquint (free) or, better yet, MPEG Streamclip (free) for one-step conversion with audio.
I tried to convert the mpeg4 format to MOV format and then convert MOV to m4v but no audio there.
No surprise here. If you check your first MPEG4 file you will see that no audio track was present following the initial conversion and no amount of further conversions will add a non-existent audio track. -
Creative cloud is working but the webpage cannot find the files and returns a SERVER PROBLEM
What is wrong since the latest updates of Creative Cloud ??
The upload is working fine but the Webpage is mostly not reachable and returns a SERVER error.I always use the app on my iMac, since more then one year. The Creative Cloud is then Syncing my files.
After that I can distribute by making a public link, but since the updates, I can see my folders on the web, but if I enter a folder, then comes a SERVER error.
In my synced folder on the iMac, the files are marked with the green v whats means, the file is synced withe the cloud.
Our system is not overloaded, I hev tested it with other dropbox and other cloud sites. -
Drag the 100 files and drop at treenode problem
< Problem >
I drag 20 files & drop those at one Treenode,
Now, those files got transparent background color
and stay on the treenode for a while and then disappear.
to the right--side--of Panel, where it should be.
--> Possible solution for this?
Please, let me know.Please post a small, compilable and runnable example of what your problem is
-
Never have had a problem synching both of my iPhones with my PC, specically Outlook files, now having a problem. It goes thru the whole process and shows completed, doesn't add any recent events posted to my PC calendar. Should I delete and reinstall iTunes?
think the current itune version removed the feature and that you should use iclouds to sync your outlook stuff and your ios
but read they will be adding the direct sync from itunes again in the next version of itunes or something like that
for now just use icloud it's free and easy to setup -
Manifest file and main class location problem
my main class is in not in the root of the jar file, it is down a package tree structure, and whenever I run the jar it says
Failed to load Main-Class manifest attribute from
xxxxx.jar
How do I specify the location of the main class? like this??
Main-Class: com/Utilities/visual/Model
thanks for your help.It should be
Main-Class: com.Utilities.visual.Model
and make sure your manifest file has an empty line at the end of your file (i.e. press enter after the last line in your manifest line). -
while iam exporting essbase database user wants to retruive data urgently,but database mode is read only.is there any way for user to access tha data.could you please tell me if any
user10821118 wrote:
while iam exporting essbase database user wants to retruive data urgently,but database mode is read only.is there any way for user to access tha data.could you please tell me if anyread only, so if you want to retrieve, you can do that . What issue/problem are you facing .
Else, to retrieve to view should not be an issue
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/
Maybe you are looking for
-
Set up Plant in India with US Company code
Hi MM Gurus, I am in the process of setting up new SAP plant in india linked to US company code. When I enter the address information, there isn't any regions in selection screen under country IN. Why is that? Also, is there any other things I should
-
Assign field symbols in infotype 0021 BADI implementation (HRPAD00INFTY )
Hi there, In PA30 infotype 0021, i have to change the value of T_VIEW_REPID by implementing BADI HRPAD00INFTY [Program MP002100->screen 2000->MODULE BEFORE_OUTPUT->PERFORM badi_before_output(sapfp50m)]. I'm trying to use field symbols (as below) to c
-
Powerpoint graphic export filters
Hi guys; I'm using Java to Com bridge technology for ppt automation to export a ppt presentation's slides as GIF images. the issue here is wether PowerPoint graphic export filters are always Installed with ppt. what if my program can't find GIF graph
-
WDA: No message for validation check on dynamic context / UI
Hello, The WD framework is checking user input to the UI elements automatically. If I use an input field ( bound to a structure containing a Data Element of type DEC 3 for example) and enter a non-numerical value I will see this message: "The Ente
-
Can I make a project in InDesign CS6 for Mac but then use it on a PC that is running CSCloud?
Can I make a project in InDesign CS6 for Mac but then use it on a PC that is running CSCloud?