Keywords not displaying in 5.2 (bug)

Is keywording broken for other folks in 5.2? It's all over the map for me - click on an image and it shows the keywords, do it again and it doesn't, do it again and it does. Adding keywords to multiple images is as hit-and-miss - sometimes they go, sometimes they don't. Sometimes they only get added to the first or last image (most recently clicked).

This is a known issue.
Check out:
CSCte67952 - DMD: RSS will not work after upgrade to 5.2
Symptom:
The RSS ticker is not showing some content after upgrading to 5.2.
This is because DMD in version 5.2 uses Flash to display the RSS ticker.
And the Flash 9 and 10 player has built in security to not allow content
from another domain.
This security feature is blocking the content.
Workaround:
There are several options available:
1: Only use RSS feeds from sites that allow cross site scripting.
2: Use a service line "Yahoo Pipes" service that acts as a proxy. This
will result in a a new URL that can be used in the DMD, bypassing
any cross-site scripting.
Additional Note:
If you use the standard RSS feed in the Signage Design tool, it will work
with any RSS feed you have and you don't need a crossdomain policy file.
Cross Domain refers only to Adobe Flash Player and the ability to read content
from other domains. Its a security issue
As an example:
If your SWF file is hosted on www.cisco.com/flash/myflash.swf
And that SWF want to read any content (xml, rss, etc..) from rss.cisco.com/myrss/xml
That is allowed
If that same SWF file tries to access data on www.google.com/somedata.xml
That would require a crossdomain.xml at cisco.com/crossdomain.xml that lists google.com
This allows the Flash player to access content at google.com
http://kb2.adobe.com/cps/142/tn_14213.html#policy
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.

Similar Messages

Keywords Not Displaying

I have two questions with regard to keywords. First is, does anyone know why I can only see the keywords down to the letter R, and not all of them, at that? Second question is, why despite confirming the case of the first letter of a Keyword ie. a person's name, as being upper case, in the Keyword List, does it continuously appear as a lower case letter when I enter the name in Keywording? Although I don't believe that LR would permit two identical words, it, and other misspellings of the name pop up as suggested keywords.
Thanks for your time,

why I can only see the keywords down to the letter R, and not all of them, at that?
Most likely because you're on Windows, you have more than about 1500 top-level keywords, and you're running into a long-standing limitation of LR on Windows. See this help article for a workaround: Keywords missing. It's been an outstanding bug for many years.
why despite confirming the case of the first letter of a Keyword ie. a person's name, as being upper case, in the Keyword List, does it continuously appear as a lower case letter when I enter the name in Keywording?
When you enter a keyword in the Keywording panel, and that keyword already exists in the Keyword List, LR will always use the case as it appears in the Keyword List. So, for example, if you have a keyword "Evyn" in the Keyword List, and you enter "eVyN" in the Keywording panel, the photo still ends up with the keyword "Evyn" assigned to it. You can change the case of the keyword by right-clicking it in the Keyword List and selected Edit Keyword.
I don't know why the case appears differently in the auto-completion in the Keywording panel. But that doesn't really matter, since LR will use the case as it appears in the Keyword List regardless.
other misspellings of the name pop up as suggested keywords
If misspellings (as opposed to just different case) are showing up as suggested keywords, you might check the Keyword List to see if those misspellings have made it into your list and possibly assigned to photos.

PDF in Safari: Fonts not displaying correctly: Has this bug been fixed?

Last year I was trying to view a PDF on the iPad with Safari, and there was a font corruption problem: On zooming in, the type would become garbled. Now granted, I was using a non-standard font (Univers Type 1). I also noticed this problem with certain magazines in the MagCloud app. I decided to work around the problem by converting my type to outlines; while this worked, it made the PDFs much larger in file size.
I checked this bug again under iOS 4.3 and could not replicate it. I've found anecdotal evidence out there that as of iOS 4.2.1 this may have been fixed, but I can't find confirmation. Any help in this regard is much appreciated. I need to present my project managers with discrete evidence that this bug has been fixed before they'll allow me to go ahead with "live" type -- and as we all know, the plural of anecdote is not data. Thanks.

Apologies, I should also make clear another key point...where it's blowing out (multiple places), I'm using apex_item within the SQL to render the form. So that's where the problem lies

All Keywords Not Displaying during Search

I have 25,000 photos in iPhoto on my Mac Pro. When I click on Search on the bottom of the screen and then click to search by Keyword, I only get the second half of the alphabet to show up with keywords so I can't click on the first half of my keywords to search. In other words, I have more keywords than the screen will show. There doesn't seem to be a scroll bar and I've enlarged the keyword screen as much as I can, already having the large monitor. Am I doing something wrong here or do the Apple designers just assume there is a limited number of keywords that you can use in iPhoto? Appreciate any suggestions.

It's not you, it's them.
the Apple designers just assume there is a limited number of keywords that you can use in iPhoto
No, they just underestimated the number that Users might have.
My workaround is to use Keyword Manager which is not yet officially updated for iPhoto 09, but you can get a beta on the forums of their website.
Regards
TD

Folder contents not displayed - Is this a bug or a feature?

If I import a complete folder structure from my harddisk (referenced file mode), I get a neatly reproduced folder structure in the Aperture project window. However, if I click on of the folders, no pictures are displayed in the Aperture browser. Apperently, you have to click on the automatically created albums within the folders to see the pictures.
Am I doing something wrong or is this (another) badly implemented feature of Aperture?

Feature. But not a very good one.

Images not displaying at their normal size, and not all keywords displaying, why?

Not sure what's going on inside Adobe Bridge CC 2014.1, but why is it that my images are not displaying at full size. Bridge says they're displaying at 100% but I know that's not the case, because when I open the same images in Mac OS Preview (OS 10.10.1 Yosemite) at 100% they're much bigger. Is there a viewing preference setting I'm missing?
Also, I use Bridge and Photoshop on two mac pro desktops: one at my office and one at home.
At work, I created more than 30 keywords in Bridge for several hundred images that reside on my external thunderbolt hard drive. But when I take that hard drive home and connected it to my home mac and then open Bridge, only a handful of keywords appear. I don't see the full list of keywords that I created at work. But in Bridge, I didn't see any option to save or export keywords as a file.
Although the image metadata does appear, because whatever keyword i assigned to an image at work does display on the home mac, I just don't see the entire keyword list.
Can or should Bridge therefore only be used on one computer? Is it not possible to transfer the entire Bridge keyword list from one mac to another?
Thanks in advance for any help feedback with this.

Hi Zenos,
I've discovered what is causing the problem, but I still need a way to fix it, if possible.
The cause of the problem is that in Windows 7 Control Panel > Display I have set the size of "text and other items" to 150% (otherwise everything is much too small too read on my screen's recommended resolution of 1920×1080).
I discovered that Irfan Viewer was also displaying at the incorrect resolution, but I managed to solve that problem by right-clicking on the IrfanView.exe icon and following Properties > Compatibility and selecting "Disable display scaling on high DPI settings".
I tried the same procedure with Thunderbird, but it made no difference. It is still displaying at the incorrect resolution.
Any suggestions?
Regards,
Catsix

I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7. Please confirm. iPhone

I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7.
Please confirm.
iPhone 4, iOS 7

Hello jayanand,
You may need to force close all open apps, then restart the phone. If necessary, you may need to reset the phone after that.
iOS: Force an app to close
http://support.apple.com/kb/HT5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
Allen

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

Hi An Iphone user,
If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
How do I delete a message?
To delete a message, tap and hold the message bubble, then tap More.
Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
After you delete a message, you can recover it only by restoring from a backup.
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

Bridge CS4 Search Not Displaying NEF Files + Keyword Problems

Hello, I am hoping someone can be of service to peculiar problem that apparently nobody else has had.
I am running Adobe Bridge CS4 (came bundled with Photoshop Elements 8) on a 2009 24 inch iMac with 4GB RAM and a 2.6mHz processor running Snow Leopard v10.6.2.
I use Adobe Bridge CS4 to add Keywords to all my photos and edit 14 bit Nikon NEF RAW files. I write the keywords to an .XMP sidecar
file.
Two days I ago I changed something in Preferences->Metadata and the next time I started Bridge CS4 and used the loupe tool on a NEF
file, it took longer than usual for the preview to come up and when it did, it was at 200% magnification instead of 100%. Once the loupe preview showed up, the NEF file had some sort of processing applied to it (it became more contrasted.) This was all within Bridge ant NOT Adobe Camera Raw. I quit the program and the next time I started Bridge, it crashed upon using the loupe tool. I looked up help on Adobe's website and it appeared I had corrupted preferences. Per Adobe's instructions I option clicked at Bridge startup to delete the preferences and purge the cache.
Everything appeared to be normal until today when I searched for a keyword and got 36 random results when I know I have hundreds of
photos tagged with that particular keyword. I started typing in other keywords and getting the same sort of results- very limited numbers of photos I have hundreds of. I always include all subfolders in all searches and used every search method available through Bridge to no avail. The searches always came up with a fraction of the photos I actually have tagged.
I then verified and repaired all disk permissions from the operating system installation CD and Bridge started returning results as
usual. However, when I clicked on an individual file in the Content pane, some of my Keywords started to appear in italics below the rest of my Keyword tree. There doesn't appear to be any rhyme or reason as to why some images will return the Keywords normally and others in italics. Also, sometime the italicized keyword tree will include keywords I edited due to typos and thus no longer existing my normal Keyword tree. I gave the "Make Persistent" command a try. It converts the italics to regular case, but it also doubles the tag so I now have two of that tag (one in the normal keyword tree, and the now converted italics keyword tree.)
Now I'm noticing that all my search results are not including NEF files; just JPEG and the occasional DNG file that I made through Adobe Camera RAW. I'm not sure if this has been the case throughout my problem or if I just noticed it late.
Regarding not displaying NEF files in searches, it appears that it will default to displaying JPEG if it has the option because as of lately I have only been shooting RAW and some of those files are showing up in the still-wonky searches (still displaying random or no photos of keywords.) However, if I manually navigate to a file, I can open and edit NEF files with no problem, they just don't display in any search modes.
Here's two short videos of what happens when I navigate a folder with NEF files by manually searching:
http://www.youtube.com/watch?v=WDjUDZzULKQ
http://www.youtube.com/watch?v=-Y9HkDK7DCs
When I click on a NEF file, the one ahead of it in Content view processes into a more contrasty image and the loupe tool previews jump between 100% and 400% and then change to 100% when dragged or they just process themselves right then and there.

I am running Adobe Bridge CS4 (came bundled with Photoshop Elements 8) on a 2009 24 inch iMac with 4GB RAM and a 2.6mHz processor running Snow Leopard v10.6.2.
Snow Leopard and Bridge CS4 do have some issues. Some have no problems and others have much problems I'm afraid.
I use Adobe Bridge CS4 to add Keywords to all my photos and edit 14 bit Nikon NEF RAW files. I write the keywords to an .XMP sidecar file.
To my knowledge the keywords are written into the XMP Metadata that is saved in the IPTC section of file itself, the XMP data in the sidecar file contain the changes you made in ACR. In other words, the keywords you have added should still be there.
Also see this Knowledge Base article about Keywords:
http://kb2.adobe.com/cps/402/kb402660.html
Two days I ago I changed something in Preferences->Metadata and the next time I started Bridge CS4 and used the loupe tool on a NEF file, it took longer than usual for the preview to come up and when it did, it was at 200% magnification instead of 100%.
Changes metadata in prefs only affects the visability of the fields in the metadata panel. put or deselect a checkmark in front of an option will let you see or not see the field in this panel, the actual data and fields ar still in the file.
it was at 200% magnification instead of 100%. Once the loupe preview showed up, the NEF file had some sort of processing applied to it (it became more contrasted.) This was all within Bridge ant NOT Adobe Camera Raw.
You can change the magnification for the loupe to 100 / 200 / 400 and 800 % using the scrollwheel or with loupe active the + and - keys. Bridge shows the settings that you made in ACR. If you have changed the default Camera Raw setting it will also change the thumbs for this file. A thumbs needs some time to be cached. First it shows with a black border around, when first cached it shows the embedded preview and in the second round it renders the ACR settings and High Quality preview (if you have not disabled this setting). Caching needs some time.
Everything appeared to be normal until today when I searched for a keyword and got 36 random results when I know I have hundreds of photos tagged with that particular keyword. I started typing in other keywords and getting the same sort of results- very limited numbers of photos I have hundreds of. I always include all subfolders in all searches and used every search method available through Bridge to no avail. The searches always came up with a fraction of the photos I actually have tagged.
Maybe you need to let the indexing in find do its work again but it might also be a snow leopard issue. Try an other app (Digital Asset Management like Expresion Media or Portfolio) to check about the keywording and find. You can use a trial version for several days. You have several options to use find keywords. In the panel itself, in the filterpanel uner the keyword tab, when clicking on a visible keyword it only shows the files with that keyword or in the menu Edit / find (shortcut cmd + F) explore the options in this menu and also choose include non indexed and let Bridge start to index your files again.
However, when I clicked on an individual file in the Content pane, some of my Keywords started to appear in italics below the rest of my Keyword tree. There doesn't appear to be any rhyme or reason as to why some images will return the Keywords normally and others in italics. Also, sometime the italicized keyword tree will include keywords I edited due to typos and thus no longer existing my normal Keyword tree. I gave the "Make Persistent" command a try. It converts the italics to regular case, but it also doubles the tag so I now have two of that tag (one in the normal keyword tree, and the now converted italics keyword tree.)
Don't know about that.
Here's two short videos of what happens when I navigate a folder with NEF files by manually searching:
http://www.youtube.com/watch?v=WDjUDZzULKQ
http://www.youtube.com/watch?v=-Y9HkDK7DCs
When I click on a NEF file, the one ahead of it in Content view processes into a more contrasty image and the loupe tool previews jump between 100% and 400% and then change to 100% when dragged or they just process themselves right then and there.
As you can see the black border around some file that disappear after a while or when you select them they have not been cached. You used purge cache so most of your earlier cached results are gone and need to rebuild.

My programming? JRE 1.4 bug? Images not displayed properly!

I made this simple card game which you can checkout at http://www.koutbo6.com I used AWT components and used Panels for drawing the cards and the main game panel has a null Layout. It runs perfectly on all java enabled browsers ... except for IE on windows XP.
I came across a problem where the card images are not displayed at all. some images that are drawn disrectly on the backround are partially drawn or not drawn correctly. The IExplorere had microsft virtual machine donloaded for windows XP. I managed to correct the problem by disabling JIT compiling from IE advanced setting.
Then I installed XP on another PC and was surprized that Microsoft stopped distributing the Java Virtual Machine for XP, so I opted for sun java plugin V1.4 and the same problems occur. There is no way to turn off JIT compiling and i read in oone of the bug postings that the option has been taken off in versio 1.4.
when the problem occurs I noticed that g.drawString works perfectly and all the AWT components are displayed even in the main panel with the null layout. the problem occurs with displaying the images. It could be with the way im doing things.
this is how I draw my images using the paint method:
     public void paint(Graphics g){
          super.paint(g);
          if(cardImage != null){
               g.drawImage(cardImage,0,0,this);
       }this is how I draw cards images on card panels, if i wana clear the image I would set cardImage to null and repaint. This is how i draw all the images in the client.
Is there a problem with my way of doing things? or is there a problem with the java plug in? I'v yet to try installing older java plug-ins on this PC, I will try it and post if it solves the problem.
Thanks in advance

Well I tried other versions of the plug in and they seem to have the same problem. But I have noticed that images loaded using Applet.getImage() were displayed without problems. And when I ran the server/client locally "without" JARing the files, the images displayed perfectly.
I am using a load image method that I picked up from the forums to enable the loading of images from jars when using netscape. This is the code I use to load the images from JAR:
     /** get an image from anyt sorce.*/
     public Image getImageFromJAR(String fileName){
          if (fileName == null) {
               return null;
          Image image = null;
          byte[] thanksToNetscape = null;
          Toolkit toolkit = Toolkit.getDefaultToolkit();
          java.io.InputStream in = getClass().getResourceAsStream(fileName);
          int x = 0;
          try{
               int length = in.available();
                    thanksToNetscape = new byte[length];
                    in.read( thanksToNetscape );
                    image = toolkit.createImage( thanksToNetscape );
          }catch(Exception exc){
               System.out.println( exc +" getting resource " +fileName );
          return image;

ABAP keyword documentation not displayed

Hello all,
I have an ECC 6 IDES system installed with SPS 14 on it. I want to view ABAP keyword documentation through SE38 --> Utilities --> Keyword documentation , But nothing is being displayed. The control brings me back to the same screen. However, ABAPHELP , ABAPDOCU tcodes work fine.
Do we need to explicitly configure the ABAP keyword documentation?
My SAP GUI is 710 with latest patch applied.
Please help me resolve this issue.
Regards,
Shahid Khadri.

Hi,
I have the same problem. I´m on SAP_ABA level 13. We have two sap systems here, MCC and MQA (on this server abap keyword documentation is not displayed). MCC does work properly and works on SAP_ABA level 13. So I guess the error can´t be from not patching the system to a later SAP_ABA level.
Any other ideas? Slowly I´m running dry of ideas.
Dominik

Smart Album Not Displaying All Photos for Keywords

Hello,
hmmm ...
I have a smart album looking for a specific keyword. This album is displaying the correct numbers of fotos with the correct keywords - but some fotos are not displayed (white background, filesize 0, exclamation mark when trying to edit).
I have checked, that the fotos are still on place: they are in the library, the (same) keyword search out of the library is working, spotlight is finding them. I did a database rebuilt.
But i have still the problem, which seems to exist only with smart albums.
Any suggestions?
Happy new year
Ivo

Hi Terence,
You are right. The Photos are indeed missing, i opened the iphoto "original" folder, which ist empty. For what reason ever. The missing photos are others than i thought.
Now i'm looking to restore them - i hope i have a suitable backup.
Thanks.
Ivo

[svn] 1017: Bug: BLZ-95 - nio channels are not displayed in ds-console

Revision: 1017
Author: [email protected]
Date: 2008-03-28 18:33:47 -0700 (Fri, 28 Mar 2008)
Log Message:
Bug: BLZ-95 - nio channels are not displayed in ds-console
QA: Yes
Doc: No
Details:
* Needed to update one of the containers in the ds-console client code for endpoint display, which contains a hardcoded list of endpoint types it pulls in.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-95
Modified Paths:
blazeds/branches/3.0.x/apps/ds-console/console/containers/EndpointManager.as

Addendum to original post - uncommenting the following code section and running both the client and the server eliminated the pauses, however the time required to perform the connections was slower than I hoped. The best I could achieve was about 1.25 seconds for 250 connections with a 20ms pause every 20 connections (dropping the pause less than 20ms or increasing the batch size more than 20 would result in connections taking 10-20 times longer!).
/* if ((i % 20) == 0) {
Thread.sleep(20);

BUG : FORMS not displaying values stored in FLOAT datatypes.

APEX 2.2.1.
Error occurs on both V9.2.0.4 and V10.2.
I'm working on a "report with form" combination and have been fighting a problem where the data entered into a form will save correctly and show in the report, but when you choose to edit the record to update it, the value will not display in the form at all.
I went round and round, and finally discovered that the problem had to do with the FLOAT datatype being used to store the data.
When creating a default "Report with Edit form" on the following two example tables, the form works correctly with SLA_SCHEDULE2 but not with SLA_SCHEDULE1
CREATE TABLE SLA_SCHEDULE1
ID NUMBER NOT NULL,
NAME VARCHAR2(128 BYTE) NOT NULL,
TRACING_PERCENTAGE FLOAT(126),
RUNS_PER_PERIOD NUMBER,
SECONDS_PER_PERIOD NUMBER,
SCHEDULE_TYPE VARCHAR2(16 BYTE) NOT NULL
CREATE TABLE SLA_SCHEDULE2
ID NUMBER NOT NULL,
NAME VARCHAR2(128 BYTE) NOT NULL,
TRACING_PERCENTAGE NUMBER,
RUNS_PER_PERIOD NUMBER,
SECONDS_PER_PERIOD NUMBER,
SCHEDULE_TYPE VARCHAR2(16 BYTE) NOT NULL
The only workaround I have so far is to change the datatype of the column.
Doug

Based on the advice Scott gave above, I've created this function...
CREATE OR REPLACE FUNCTION Get_Float_Value
p_table_name           VARCHAR2,
     p_float_column_name     VARCHAR2,
     p_key_id_name          VARCHAR2,
     p_key_id_value           VARCHAR2
RETURN FLOAT IS
TYPE FLOAT_CURSOR IS REF CURSOR;
f_cur FLOAT_CURSOR;
FLOAT_VALUE FLOAT(126);
SQL_STMT VARCHAR2(500);
BEGIN
     SQL_STMT := 'select :a from :b where :c = :d';
     SQL_STMT := REPLACE(SQL_STMT, ':a', p_float_column_name);
     SQL_STMT := REPLACE(SQL_STMT, ':b', p_table_name);
     SQL_STMT := REPLACE(SQL_STMT, ':c', p_key_id_name);
     SQL_STMT := REPLACE(SQL_STMT, ':d', p_key_id_value);
OPEN f_cur FOR SQL_STMT;
     LOOP
     FETCH f_cur INTO FLOAT_VALUE;
     EXIT WHEN f_CUR%NOTFOUND;
     RETURN FLOAT_VALUE;
     END LOOP;
     RETURN NULL;
END Get_Float_Value;
This allows you to call the function ANYWHERE you use a FLOAT, without having to create one function per table/column you might need to use it against.
I know that I could have used a 'USING' statement on the cursor to do the replacements, but I always find it easier to debug replacement values using the REPLACE function.
Doug

Bug: thumbnails not displaying on library grid view

Since using v1.0 the thumbnails will not display on the grid view (there is simply a grid of empty grey squares which can be clicked on). All beta versions worked fine. I started a new library with no improvement. All other screens work as expected. Using Windows XP SP2. Any ideas?

joel, I'm experiencing the same issue - the thumbnails start to appear but once they get to the point where they would be fully loaded, they disappear. I used beta as well, and that worked perfectly fine. Just sent in a ticket to the customer support at adobe, hopefully they can help with a solution. I'm only running the trial version of lightroom.
Where you able to figure out a solution?

Keywords not displaying in 5.2 (bug)

Similar Messages

Maybe you are looking for